CCTK WinPE TPM Activation fails every time

Similar Questions

• Three Windows Vista security updates continue to fail every time.

  Three Vista updates fail every time Windows Update tries to install.  They seem to settle in Windows Update and then require a reboot to complete.  During the restart of the system required, "Configuring updates 3/3 ' always shows 0% complete then finally said the ' configuration updates are not correctly installed and updates to return back and restart the system, then ends."

  These are the updates:

  Update security for WIndows Vista (KB2691442)

  Update security for WIndows Vista (KB2655992)

  A security update cumulative for Internet Explorer 9 for WIndows Vista (KB2719177)

  I tried several times with the same negative result of "failing".

  I got a Windows Defender Update yesterday and only one installed perfectly, but they are still pending.

  Suggestions?

  Thank you!

  The link below has options to solve your problem of loop.

  >>

  UTC/GMT is 19:41 Saturday, August 4, 2012

• SDK software update a few IDE - fails - every time

  When you try to update the SDK of the IDE from the inside, all files seem to get, but immediately after unpacking/installation starts (after about 22% of the process)-it fails - every time - saying:

  Updated SDK has encountered a problem"... and the show of"details ":

  There was an error in updating software development kit. Press the Details button to review the error.
  Operation operation to install SDK failed: an error occurred during the installation elements
  An error occurred during the installation elements
  session context has beenprofile = DefaultProfile, phase is org.eclipse.equinox.internal.p2.engine.phases.Install, operand = null--> [R] bb10_0_09_native_sdk_684.10.0.10.684.group 1.0.0 action = com.qnx.tools.ide.sdk.manager.core.actions.SdkManagerPostInstallAction).
  Can not save the xml qconfig file.
  An error occurred during the installation elements
  session context has beenprofile = DefaultProfile, phase is org.eclipse.equinox.internal.p2.engine.phases.Install, operand = null--> [R] bb10_0_09_native_sdk_684.10.0.10.684.group 1.0.0 action = com.qnx.tools.ide.sdk.manager.core.actions.SdkManagerPostInstallAction).
  Can not save the xml qconfig file.

  All our 8 x 64 Windows installations gives the same error.

  and local users have all the rights administrator - BBNDK installed on the non-system drive

  Any ideas what's wrong?

  I don't know too much about this, but looking at the QNX_CONFIGURATION in the BBNDK-ENV. BEATS you posted here, it seems that may have installed the SDK as a Windows user "bb10.

  So try checking if user "bb10" exists and has access to the folder where qconfig.xml is supposed to be saved.

  Otherwise, you can try the manual process described here: http://supportforums.blackberry.com/t5/Cascades-Development/Cascades-SDK-update-fails-An-error-occur...

• Update of Photoshop CC 2015: I'm trying to upgrade to CC 2015.1.on my IMac, but I can't update it fails every time error: U44M1P7

  I try to update my IMac CC 2015.1.on but, I can't update it fails every time? Not on Mac Book Pro! I left creative cloud, open creative, disconect and re connect to the creative cloud but it's the same thing on I mac 10.10.5 version (error: U44M1P7) tanks

  In this case I would ask you to Contact Customer Services such as technical troubleshooting may be required.

• I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there is no dc pro acrobat installs

  I am trying to download acrobat pro dc creative use of clouds packer. It fails every time. It seems like PAC and do the package, but then when I try to install (acrobat pro dc) nothing happens. Installation starts but there no acrobat pro CD is installed.

  Hi Pavle,

  The installer for Acrobat is different from the rest Cloud Creative applications that is why when you create a package by using Creative Cloud Packager, there are two folders created:-

  (1) build-->> all upward for all Applications of Cloud Creative except Acrobat.

  (2) exceptions-->> Contains for Acrobat and the Muse.

  You will need to install Acrobat first through the Exceptions folder. Select the option to install as a trial or a subscription.

  Then install the creative rest of Cloud applications through generation file, it will install the applications and your copy of Acrobat license also.

  I hope this helps!

  Thank you

  Tanvi

• I try to install Photoshop for a free trial and it fails every time. I installed creative cloud with no problems. Help?

  I try to install Photoshop for a free trial and it fails every time. I installed creative cloud with no problems. Help?

  What is the error message?

  If there is none and the problem occurs during the installation, errors in the Installation and launch journal | CS5.5, CS5, CS6, CC

• Installation of creative cloud on Mac fails every time. Fine downloads, install resignations after 3/4 full.

  Installation of creative cloud on Mac fails every time. Fine downloads, install resignations after 3/4 full.

  Downloaded cloud creative I got a reminder to downloads, fine, click on install, gets near the end of the installation and then the box disappears and nothing happens. I have a message in the corner of my Mac asking me to re-download creative cloud. No matter how many times I download and try to install it, it never works.

  

  

  Please follow the steps in the link below: L

  Of nowhere, cloud Creative works not

  For that matter, the very very important steps he trash Adobe Creative Cloud and Adobe Application Manager of public services.

  File damaged Adobe Application Manager or Adobe Creative Cloud will conflict installation, make sure those trashy and run the cleanup tool and remove Adobe Application Manager, and then try to install the creative cloud, it should work.

• HP Pavilion dv2700 laptop displays the message "system CMOS checksum failed" every time you start

  

  Hi @all,

  I have a HP Pavilion dv2700 - kh933ea laptop computer #abv (it is a HP Pavilion dv2799ee Special Edition Entertainment Notebook PC to be exact) that displays the message "system CMOS checksum failed. Press F1 to continue"every time you start the system. My OS is Windows 7 / 32 bit.

  Then I updated my BIOS to version 2.4e, 01-dec-08 Phoenix (the SMBIOS version remained the same before 2.4), but the issue is not resolved. I have attached a screenshot for processor and BIOS versions.

  Can someone guide me on how to solve this problem?

  Thank you very much in advance.

  I don't see the screenshot of your post attachments. Please repost them.

  This error message means that WHAT BIOS is damaged. You will need to have the BIOS flashed in a mobile shop, repair a BIOS or an HP Service Center. Do a search online with Google or Bing repair for a BIOS.  If you keep trying to update the BIOS there will come a time where everything you have a black screen.

• Double layer burning fails every time - Tecra A9

  Hi all.

  My Tecra A9 is equipped with Teac DVW28ECT (Rev7.5A) I have no problem burning on a DVD single layer... but EVERY time I try to burn to a double layer process stops about 25% in the burning process.

  I can't find more recent updates of the driver/firmware for the dvd drive. I tried all brands of disk...

  Burning programs I use are up-to-date and are great for double layer / DVD9 disc production.

  Any advice of members who can help would be EXTREMELY appreciated!

  Hello

  I checked the manual and there is info that the laptop support DVD + R DL and DVD-R DL (format 1)

  But certain types and formats DVD-R DL and DVD + R DL disc may be unreadable.
  Also the DVD-R DL can be burned using the 2 x speed and the speed of 2.4 x DVD + R DL.

  Please see also the 90 user manual page.
  You will find information on tested DVD DL disc that are compatible with this laptop.

  Notes; the companies mentioned in the user manual are disc manufacturers one no suppliers!

• I tried updating MSN and it fails every time!

  MSN messenger update and the update does not have 50 times or more, have tried to look through AID to find a live person to help with this.  VERY FRUSTRATED that MSN Messenger does not work and I get no help through the search through the many windows.

  Hello

  1. The question is limited to the MSN messenger update?
  2. What is the error message received when updating fails?

  Method 1:

  You can try the steps from the following link and check if it helps:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  Put the computer to boot and then try to install the update for MSN messenger check if the problem persists.

  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 of the KB article provided above.

  Let us know if it helps!

• Hotmail - password fails every time

  5.23.11 just the morning, I opened Hotmail has tried to log on & it did 'not' recognize my password.  I had to reset my password at least 5 times today, just to check emails.  Anyone know why?  Never experienced this before & no settings have been changed on my computer.  * Note: Delete the passwords box is not checked!

  Can someone help me?  Thanks in advance!

  Hello

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• Why the * My Genuine Windows 7 Key fails every time I have install on a new virtual machine?

  Hello

  I spend computers constantly in my work.  I have often install new hard drives and move machines, as part of my work.  I bought Windows 7 and have never installed on a machine at a time.  Calling your woefully inadequate to voice recognition phone system to tell you that I indeed expect to install the operating system I paid for * the * out of me.

  I already spent a MacBook for my main machine; you're lucky I am on Windows at all.  In general, I installed Linux on my other machines.  Each installation of my Windows 7 key is a new chance for you to make me not interested in Windows 10.  Each. Unique. Time. (I have to call to 'allow' my installations because that your automatic authorization is either one) broke, or b) is set up to discourage people to install your operating system either.

  Is it possible to add it please my Windows 7 key to a list of 'Yes, this person's owner  Cause I'm in anger.

  Sincerely,

  William Curtis Jarrell

  There is a limit to how many times you can move a version of Windows from one computer to another, once you exceed this limit (typically 5 times) then phone activation is required.

  Why; too often people install Windows on more than one PC without deleting the previous computer. (A license is a key a PC).

  J W Stuart: http://www.pagestart.com

• Hot RMAN backup fails every time in R12.

  Hi experts,

  Please suggest me that I have to plan rman backup hot. I have "write" command to perform hot backup. When I take backup hot of 1st time the backup completed successfully. but when I run the same command resume backup for the second day. it is impossible to give space issue I havhot e calendar for daily use rman backup.

  I had to take the backup hot daily and I want backup overwrite the backup file according to the daily backup.

  Please suggest me what I need to make changes in the configuration of rman and the rman command.

  OS - réhèl 5.6

  Database - 11.1

  EBS - r12.3

  configuration of RMAN:

  RMAN > show all.
  
  Database with db_unique_name UAT RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1;
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1;
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' / d06/UAT/rman_hot_backup/Backup_daily%d_DB_%u_%s_%p';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BZIP2 '; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / d06/UAT/db/tech_st/11.1.0/dbs/snapcf_UAT.f'; # by default
  
  RMAN >

  
  

  ##############################################################################################################

  
  

  RMAN command that I used to make hot extra strength 0 cumulative backup.

  
  RMAN > run
  {
  allocate channels c1 device type disk format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  allocate channel c2 device type disc format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  allocate channels c3 device type disk format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  allocate channel c4 device type disc format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  cumulative incremental database backup level 1 more archivelog;
  output channel c1;
  output channel c2.
  output channel c3.
  output channel c4.
  }
  

  If something bad in the configuration of rman and my order please suggest me to take the backup hot every day with success.

  
  

  concerning

  pritesh Rodriguez
  

  Hi Pritesh, thanks for the update. You can mark this thread as answered if your questions have been answered. cordially Karan

• Installation fails every time - integrity check

  Try to install 10.1

  Dowload Manager starts... gets at the end of the download, and then after awhile first gives error window that says "Installer failed integrity check" with option to take.

  When I try to resume... it restarts and this time fails with the error 'Installer has failed the verification of integrity (16262.304.371).

  Tried several times - same result.

  It is possible that the error comes from the Download Manager; try to download and run the executable installer from http://www.adobe.com/products/flashplayer/fp_distribution3.html

• I tried several times to move email from old Win7 on new computer Win8.1 and fail every time.

  I followed the instructions to https://support.mozilla.org/en-US/kb/profiles-tb#w_profile-location-summary several times, all the data user of Thunderbird removed and reinstalled Thunderbird.

  I have it solved!

  By following the instructions at https://support.mozilla.org/en-US/kb/profiles-tb, I open Thunderbird and created a new profile. Open Thunderbird, I followed the guests to setup e-mail account to connect to my email server. It would not establish POP3 I want, but has implemented IMAP.

  The secret was to create the e-mail account first, and then search for the profile folder in Thunderbird instead of using Windows Explorer. There was a lot of folders and files in the folder of the selected profile, and copy them to the backup brought all my information in Thunderbird.