Change during the loading of the document

Similar Questions

• Impossible to update kb2779768 in windows 8 restore changes during the configuration to 94%

  ORIGINAL TITLE: cannot update kb2779768 in windows 8

  Restore changes made during the configuration to 94%

  Help, please

  Hello

  Thank you for your message and give us the opportunity to help you.

  Update problems are usually caused by software of third party incompatible or incompatible drivers.

  Please answer these questions so that I can better help you.
  1. have you installed any third-party anti-virus software?
  2 are you able to install some other updates?
  3. do you get an error message?

  To verify the error,
  (a) press "Windows + R" and type 'control' and press on enter.
  (b) type "Windows Update" in the search box top right and click on "View Update History" based on the results.
  (c) double click on updates failed to display the error.

  You can try these methods to check whether the problem is resolved.

  Method 1: Run the update utility.
  (a) Type "Troubleshooting" on the splash screen, click on 'Settings' and press ENTER.
  (b) click on "Show all" in the left pane and then click on "Windows Update" and run the troubleshooter.

  Method 2:

  Step 1: Temporarily disable the anti virus software.

  If you have an anti software antivirus installed, temporarily disable it and check if the update works.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. Windows 8 has an inbuild anti virus called Windows Defender which protects your system.

  Step 2: Try to install the update to the clean boot.
  Follow the steps here to set up the computer in clean boot mode, and then try to update Windows.

  http://support.Microsoft.com/kb/929135

  Note: Once the diagnosis is made please follow "step 3: reset the computer to.
  Start as usual"on the article to start the computer in normal mode.

  Step 3: Try to manually install the KB2779768 in clean boot.

  If step 1 does not work, download the update manually and install it.
  http://www.Microsoft.com/en-us/download/search.aspx?q=kb2779768

  Note: Once the diagnosis is made please follow "step 3: reset the computer to.
  Start as usual"on the article to start the computer in normal mode.

  For any future reference.
  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  I hope this helps. Feel free to use the forum for any other issue of Windows, you may have.

• How to detect changes in the document?

  Dear friends and experts,

  It seems obvious that, with my new project , I opened Pandora's box...

  Pallets to remain open, even when you set a new location of cursor, so I use this to my dialogue.

  But the user can also switch to another document when the palette is open.

  Currently I have a Refresh button, and the user is prompted to use after the passage of another document. The function behind is to analyse the newly entered document and define global variables to update the dialog.

  How I detect the switch of the document? I did find something like onDocumentChange.

  (In the current script a check for the name of the modified document is in the function btnRefresh.onClick to avoid irrelevant work).

  Thank you for all the ideas.

  Klaus

  Hi Klaus,

  This version of your script works fine:

  Just remove some "var" in winPal - dialogue.

  Delete "winPal.show ()" in the Notify function

  give a little more space to st1.

     #target framemaker
      Notification (Constants.FA_Note_PostActiveDocChange, true);
      var globalValue = app.ActiveDoc.Name;
      var winPal = new Window ("palette", "Simple Palette", undefined);  
  
      SimplePalette (globalValue);  
  
      function SimplePalette (outerParm) {
         innerParm = "none";
         buttonOuter = winPal.add ("button", undefined, "Outer");
         buttonInner = winPal.add ("button", undefined, "Inner");
         st0 = winPal.add ("statictext", undefined, "st= " + innerParm);
         st0.preferredSize.width = 300;
         st1 = winPal.add ("statictext", undefined, "Button clicked: " + innerParm);
        st1.preferredSize.width = 300;
        buttonOuter.onClick = function () {
          st1.text = "Button clicked: Outer";
        }  
  
        buttonInner.onClick = function () {
          st1.text = "Button clicked: Inner";
          st0.text = outerParm;                                // this changes the display
        }  
  
        winPal.show ();
      }  
  
      function Notify (note, object, sparam, iparam) {
      // Handle the event triggered after the active document changes.
      $.bp(true);  // here was a type : $.br(true)
        switch (note) {
          case Constants.FA_Note_PostActiveDocChange:
              {
            // Update your dialog box here.
            st1.text = "Current document is " + object.Name ;
            break;
            }
        }
      }
  

• Change to the Document Mode for IE9

  I exported my Captivate for HTML5 project and the project works on my MAC and PC, but when I have to test it on another computer to co-workers using IE9, she couldn't read the project, index.html. When she opened the index.html, that's the answer she received in her browser,

  "The content you are trying to view is not supported in the current Mode of Internet Explorer Document. Change the Document Mode on Internet Explorer 9 standards and try to view the content again.
  To change the Document Mode, press F12, click on Document Mode:, and then select Internet Explorer 9 standards. »

  Can I change the CSS document in the project folder?

  Any advice would be helpful.

  IE9 is not all that HTML5 ready.  I would recommend that you export to HTML5 and HTM/SWF when you publish.  If you do, you should see a file named Multiscreen.html.  Ask your colleague to try this file instead.

• How can I save information on a cd - rw and be able to make changes to the documents instead of read-only

  I'm trying to save the information from my laptop to a CDRW. But it wont let me make changes, says that this is a read-only.

  Hi GracieGritton,

  It is not possible to make changes on the data stored in the CD. You must copy the data to the laptop, and then make the necessary changes. You can also make the changes before saving the data to a CD.

• The change to the Document: not allowed

  Hello

  Anyone who can help us on our problem with files created using Acrobat 7.

  When you open the files using the latest versions of The Document Assembly and modify the Documents always marked as unauthorized , but when we open it with Acrobat 7 all parameters are allowed. tried in some Acrobat 7 computers with the same results.

  

  Hi, I just found this forum because I had the same problem. I finally found a solution that worked for me, so I thought I would post it here if it helps someone. I have Adobe Pro XI and was not able to edit a document that had any security settings made by Adobe 7, I kept getting the message that it has been signed. I went to tools > forms > Edit Form and I got an error saying the document was signed, but he also asked me if I wanted to save a copy, I did. Then I was able to edit the copy very well. I tried the option "save under" before this and it doesn't work, so it seems that 'save a copy' and ' save under ' are not the same. There may be another way to save a copy, but it is the solution that I ran.

• How to get the changes during the process of replicat ABENDED

  Hello
  I'm working on Oracle GG two-way DML replication. I m stuck in one place.
  
  My target replicat process has been ADDED due to the error:-ORA-01403: no data found. I restarted my process replicat again by runing the below command
  
  GGSCI (db1) 30 > replicat rep2 alter now
  GGSCI (db1) 30 > start replicat rep2
  
  After the reboot, the process to replicate that I do not see the changes on the target server which I had applied on the source for replicat target server was ABENED.
  My doubt is.
  
  1. is my command is correct for start replicat ABENDEND process?
  2. how to get the changes to the target server that applied to source for replication targer ABNDED?
  3. how to avoid the process of ABENDED replicat on the production server?
  4. how to follow the process in the production server ADDED?
  
  Please HELP:)
  
  Published by: Sabrina on August 29, 2012 03:32

  info from the GGSCI prompt will tell you the current file path and RBA.

  With this information, you can go in logdump and follow these steps:

  open 
  detail data on
  pos 
  n (next)
  

  It will appear the RBA # the next transaction. Then you return to the GGSCI prompt and do:

  ALTER EXTRBA
  BEGINNING

  With that he will take this next RBA from until you reach the following 1403

  Greetings,
  NACEUR

  PD: in the case where your question is answered please remember to mark your answers questions in order to clean up the forum and help others when they are looking for solutions to their problems.

• Adding track changes on the Document?

  I had a change of track of this form script, I was wondeing if there was a way to put my information in a text box on .75in from the top of my documents?

  Here is the script I use

  var myChanges = app.documents.everyItem().stories.everyItem().changes;  
  
  var myString = '';  
  
  for (var i=0; i<myChanges.length; i++) {  
          
  var myChange = myChanges[i];  
          
  myString += myChange.userName + '\t';  
          
  myString += myChange.date + '\t';  
          
  myString += myChange.changeType + '\n';  
         
   
  
  }  
  
  alert(myString);  
  
  
  

  No. I think, it is not allfollowed.

  See the three different kinds of change.changeType :

  ChangeTypes.INSERTED_TEXT

  ChangeTypes.DELETED_TEXT

  ChangeTypes.MOVED_TEXT

  When you replace an image in its container, even when it is docked, should not count as change.

  This is just my assumption, I have done nothing with change again.

  Uwe

• JQuery MoveColumns causes "this form contains unsaved changes" during the previous/press

  I have a page Apex tabular 4.1 loading it moves the columns via jQuery following Script:

  jQuery.moveColumns = function)

  {

  var tbl is jQuery ('table.report - standard');.

  var colChanges = apex.item("ColumnOrder).getValue (); Contains the movements to make columns in the correct order

  var colChangesArray = colChanges.split('^');

  If (colChanges.trim () .length > 0)

  {

  for (var i = 0; i < colChangesArray.length; i ++)

  {

  moving var = colChangesArray [i].split(':');

  Query.moveColumn (tbl, move [0], moves [1], 'AFTER');

  }

  }

  }

  If the user presses the next/previous button to get to the next/previous line set, they will receive the message "this form contains unsaved changes." You can click on the submit button and there is no updated\inserted lines. If I comment out the call to the moveColumns the next/previous buttons work without warning to the user.

  It seems so move columns autour put an internal indicator reflection there are changes. Is there a way in my jQuery script after finishing move the columns autour, I can reset indicator (whatever that is) if the user is not prompted with the warning of unsaved changes?

  I found this ad where they have been reset to the elements on the page:APEX 4.1 is possible to remove the message "unsaved changes" pagination? and once I added this function up to the end of my function moving columns around it has solved the problem. Now either he gives me the message the unsaved changes when I page. It will give me the message if there are unsaved changes when I'm trying to paginate so all is well!

• Slow down the change during the stretching of audio or video clips - help!

  I have no idea how it's called, but this is the case whenever I'm dragging an audio or video clip to extend or shorten. When I start to extend or abridge, my video preview Panel divides the screen with the end point and the starting point of the video (whatever it is called). This is driving me crazy! I have a high-end computer and it stops playback during at least 10 seconds, EACH TIME I send an audio clip or video. Someone at - it a credit solutions? It's probably the most frustrating thing I've ever met on this program. It literally stops working.

  Change the setting of Menu - "Composite overview over the plate.

• Best practices for the text which changes during the sequence?

  I've been using videos creation as the here, in which text appears from time to time on the scene:

  Making Pinball Machine death market - YouTube

  So far, I have created a title he duplicate for every time the text changes, and loading of each title in the sequence at the point where I want it to appear. Is there a simpler way to create text that changes throughout a sequence, so I don't have to worry about each overlay having slight differences of position or other attributes?

  Just curious to know if there is a workflow easier to place the text on the video.

  Thank you!

  You can also save a few steps by duplicating the title thanks to the timeline by ALT + drag to the new location (which created not only a new element of the track, but also a new independent project item), then double-clicking the new element of the track to open it in the Titler for editing. But this refinement in your workflow has no impact on the concern said re: 'differences of position or other attributes' - it's entirely a function of the changes that you make in the Titler.

• ID3 tags to change during the transfer on USB

  When my iMac to transfer on a USB mp3 tracks, the ID3 tags are somehow get reversed. My car stereo then displays the correct track number, but plays and the false name of audio and the railway. In this particular case, I try to transfer an audiobook with 66 chapters. I named the files 001, 002, etc. in order to read in the correct order. ID3 tags are named Chapter 1, Chapter 2, etc. I can't understand why so, when read in my car, it will show track 001, but read the audio Chapter 4 and show Chapter 4. The funny thing is, does it only on my Mac. If I transfer files from my Mac to work they correctly and display all the correct information. I tried to copy from iTunes and from the finder directly and pass the ID3 info in both directions; They even produce different results, but both are mixed up. Any help would be much appreciated. Thank you!

  I don't know how to copy the files on your player could possibly change the iD3 tags.  They are part of the file, and it would be like saying take a book on a shelf and put it in a box caused some pages from the book to the book.  Are you sure that the track numbers you see are the real file names?  I think the most likely is despite the naming convention of the file that you are using your player somehow files out of use.  I imagine that you have provided the correct order in the track number and if there are a number of disk that it conforms to the order you want too.

• Color changes during the recording of the PSD to JPEG

  Hi all

  When I export the image below of psd to jpeg color changes.

  The rose becomes Purple!

  

  Any help would be appreciated

  Just to be absolutely clear on this point - the problem here is that the file is in ProPhoto RGB.

  Windows 'Photos' isn't the color management and cannot represent a ProPhoto file correctly. No more than any other application without color management.

  Convert sRGB. It is the right answer to your question (which is the error of the very common beginner, BTW).

  In Photoshop, go to Edition > convert to profile > sRGB IEC61966 - 2.1.

  If you're Using "export as" or "Save for Web", just check the box convert to sRGB.

• Color changes during the recording of the PSD to JPEG (safe for the web) in PS CS5 working in sRGB

  As I secured it for the web a PSD file, jpeg version of the same file changes slightly color - I opened the two files in PS CS5 to compare.

  File initially processed in Lightroom 6 and converted to sRGB for export.

  I worked in the sRGB color space in Photoshop.

  When exporting I secured for the web. I tried both options checked including the color profile and convert to sRGB.

  I tried to save to the web as a PNG and color remained the same, she only moves for JPEG files.

  You can't really see the difference in color with a naked eye, but be specific. I don't understand why he would change when I work in the color space is sRBG. Please help this is driving me crazy!

  JPEG compression can change the values, even quite spectacular on single pixel level. You have the selector of color set to "sample point"?

• Tabbed pages not changed during the selection of the TAB LIST

  Hi all
  
  I have a form that contains 15 tabs, 1 10 Tabs are dynamic (enabled with the new instance of the form depending on the configuration) and 11 to 15 are static tabs visible for all.
  
  My problem is when I am clicking on tabs iam able to switch tabs, but when I select the tab in the tab list , I don't go to the selected TAB.
  
  Ex: when I am in 1 TAB and select TAB15 on tab list my form remains in TAB1 and don't move not TAB 15
  
  Please give me a Solution.
  
  
  WHEN the PAGE of TABS CHANGE my code is
  
  DECLARE
  l_curr_rec NUMBER;
  BEGIN
  l_curr_rec: =: SYSTEM. CURSOR_RECORD;
  
  -Get the Page tabs at the top of the default page to the form
  SHOW_VIEW ('HDR_CANVAS_FIXED');
  : global p:System.NET.HttpWebResponse.headers: = GET_CANVAS_PROPERTY ('TAB_CANVAS', topmost_tab_page);
  
  IF(:GLOBAL.) HEADERS = "AS_REC_IMAGE") THEN
  
  
  SHOW_VIEW ('AS_REC_IMAGE');
  SET_VIEW_PROPERTY ('AS_REC_IMAGE', VISIBLE, PROPERTY_TRUE);
  
  SET_TAB_PAGE_PROPERTY ('AS_REC_IMAGE', ENABLED, PROPERTY_TRUE);
  
  GO_BLOCK ('AS_REC');
  
  -Hide the other canvases except the canvas price
  
  
  ELSIF(:GLOBAL.) HEADERS = "TRIM_REC_IMAGE") THEN
  
  
  SHOW_VIEW ('TRIM_REC_IMAGE');
  SET_VIEW_PROPERTY ('TRIM_REC_IMAGE', VISIBLE, PROPERTY_TRUE);
  
  SET_TAB_PAGE_PROPERTY ('TRIM_REC_IMAGE', ENABLED, PROPERTY_TRUE);
  
  GO_BLOCK ('TRIM_REC');
  
  -Hide the other canvases except the canvas price
  
  ELSIF(:GLOBAL.) HEADERS = "AS_SHIP_IMAGE") THEN
  
  SHOW_VIEW ('AS_SHIP_IMAGE');
  SET_VIEW_PROPERTY ('AS_SHIP_IMAGE', VISIBLE, PROPERTY_TRUE);
  
  SET_TAB_PAGE_PROPERTY ('AS_SHIP_IMAGE', ENABLED, PROPERTY_TRUE);
  GO_BLOCK ('AS_SHIP');
  
  -Hide the other canvases except the canvas price
  
  ELSIF(:GLOBAL.) HEADERS = "TRIM_SHIP_IMAGE") THEN
  
  SHOW_VIEW ('TRIM_SHIP_IMAGE');
  SET_VIEW_PROPERTY ('TRIM_SHIP_IMAGE', VISIBLE, PROPERTY_TRUE);
  
  SET_TAB_PAGE_PROPERTY ('TRIM_SHIP_IMAGE', ENABLED, PROPERTY_TRUE);
  
  GO_BLOCK ('TRIM_SHIP');
  
  -Hide the other canvases except the canvas price
  
  
  ELSIF(:GLOBAL.) HEADERS = 'EXTRA') THEN
  -Show export Web-
  
  
  SHOW_VIEW ('EXTRA');
  SET_VIEW_PROPERTY ('EXTRA', VISIBLE, PROPERTY_TRUE);
  
  SET_TAB_PAGE_PROPERTY ('EXTRA', ENABLED, PROPERTY_TRUE);
  GO_BLOCK ('EXTRA');
  
  -Hide the other canvases except the canvas price
  
  
  
  ON THE OTHER - DYNAMIC TABS
  -Hide all the other static canvases
  
  
  IF (: OVERALL.) HEADERS = "TC01") THEN
  GO_BLOCK ('TC01');
  
  ELSIF (: OVERALL.) HEADERS = "CT02") THEN
  GO_BLOCK ('CT02');
  
  ELSIF (: OVERALL.) HEADERS = "CT03") THEN
  GO_BLOCK ('CT03');
  
  ELSIF (: OVERALL.) HEADERS = "CT04") THEN
  GO_BLOCK ('CT04');
  
  ELSIF (: OVERALL.) HEADERS = "CT05") THEN
  GO_BLOCK ('CT05');
  
  ELSIF (: OVERALL.) HEADERS = "CT06") THEN
  GO_BLOCK ('CT06');
  
  ELSIF (: OVERALL.) HEADERS = "CT07") THEN
  GO_BLOCK ('CT07');
  
  ELSIF (: OVERALL.) HEADERS = "CT08") THEN
  GO_BLOCK ('CT08');
  
  ELSIF (: OVERALL.) HEADERS = "CT09") THEN
  GO_BLOCK ('CT09');
  
  ELSE - ELSIF (: OVERALL.) HEADERS = "TM10") THEN
  GO_BLOCK ('TM10');
  
  END IF;
  
  END IF;
  END;
  
  
  
  Thank you
  Durga Srinivas.
  
  Published by: DurgaSrinivas_886836 on December 3, 2012 20:12

  In your trigger, you do a SHOW_VIEW ("HDR_CANVAS_FIXED"); before selecting the: GLOBAL. Headers information. I don't know what is HDR_CANVAS_FIXED, but I wonder if it is what you ruin. What happens if you either comment out:

  DECLARE
    l_curr_rec     NUMBER;
  BEGIN
    l_curr_rec := :SYSTEM.CURSOR_RECORD;
  
    --Get the Top Default Tab Page for the Form
    --SHOW_VIEW ('HDR_CANVAS_FIXED'); /* <-------------------------------------------------------Comment it out */
    :global.headers := GET_CANVAS_PROPERTY ('TAB_CANVAS', topmost_tab_page);
  
    IF (:GLOBAL.HEADERS = 'AS_REC_IMAGE') THEN
      SHOW_VIEW ('AS_REC_IMAGE');
      .
      .
      .
  

  or if you have to move after the: GLOBAL. HEADERS:

  DECLARE
    l_curr_rec     NUMBER;
  BEGIN
    l_curr_rec := :SYSTEM.CURSOR_RECORD;
  
    --Get the Top Default Tab Page for the Form
    :global.headers := GET_CANVAS_PROPERTY ('TAB_CANVAS', topmost_tab_page);
    SHOW_VIEW ('HDR_CANVAS_FIXED'); /* <------------------------------------ Swap it with :global.headers */
  
    IF (:GLOBAL.HEADERS = 'AS_REC_IMAGE') THEN
      SHOW_VIEW ('AS_REC_IMAGE');
      SET_VIEW_PROPERTY ('AS_REC_IMAGE', VISIBLE, PROPERTY_TRUE);
      SET_TAB_PAGE_PROPERTY ('AS_REC_IMAGE', ENABLED, PROPERTY_TRUE);
      GO_BLOCK ('AS_REC');
    --Hide the other canvases except the Pricing Canvas
    ELSIF (:GLOBAL.HEADERS = 'TRIM_REC_IMAGE') THEN
      SHOW_VIEW ('TRIM_REC_IMAGE');
      .
      .
      .