Change the Admin password in Hyperion planning

Similar Questions

• Dell your 2161DS remote console switch cannot change the Admin password after updated to the latest Firmware

  Dear Sir:
   
  After having updated the latest Firmware [Dell your 2161DS digital switch, Firmware, Multi OS, Multi language, Multi system, v.3.1.0.0, 1.3 (A03-00)] and restore the default settings. We do this directly through the Remote Console software.  Seeing the log in window, the user name is "Admin" and there is no password.  We can access in the switch, but "Admin" a/c is missing from the "User" settings category. So we can't change the Admin password.
   
  Could you help us to change any password Admin password?
   
  Thank you
   
  Tim.
  
  

• Is there a safe way to change the admin password?

  When I got my custom PC built and began working with her six years ago, I had no understanding of the importance of strong passwords. The password for the administrator account on my PC is very low. I said two completely different things on fixing this. 1. it is completely impossible and any attempt will be completely trash the account Admin 2 - it is possible if you use the correct procedure and follow the instructions carefully. Who is the most reliable assertion?

  Hi okieseeker,

  It does not hurt to change the password on the computer, unless you change or forget the password.

  Change the user password

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/usercpl_change_password.mspx?mfr=true

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• I can't change my admin password, even though I am connected to the account now.

  Last week I changed my Admin password to something a lot more time with little maintenance, however I do not remember it now, so my question is, what can I do to reset it back to the old. Unfortunately, I forgot to make a recovery disk.

  I tried to remove it from in the account itself, but it keeps asking for the password, I created another admin account so I can still do the General administrative tasks but I like my old account, I actually installed programs only to this account if I'm afraid to log out of it for now.

  I did a test on the admin account, I created and it does not have a current password remove or change its password. I was wondering if I am logged into this admin account, I wouldn't need a current password, but I wanted to ask here first... If I can't change it from another admin account, how can I reset it since in the current account without the collar that I created last week.

  I am sure I know the first 23 combination of uppercase and lowercase letters and numbers, but I can't for the life of me remember what I've added to separate it from another computer, I have... I wanted to just the two have similar passwords, with it longer, and so it would be easy to remember (which seems to achieve style lol)

  Any help would be most appreciated. Thank you

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  See you soon

• I changed my admin.password last night and the earlier my husband did a system restore on it. now it tells me wrong password

  original title: help please!

  I have windows vista on my acer aspire 5517 I changed my admin.password last night and the earlier my husband did a system restore on it. now it tells me wrong password... I don't have a dics in it plese... I need help ASAP

  Next time please post in a forum of Vista. This one is for Windows 7. But since you're here:

  You can change your password to something that you remember another administrative user account. If you had only an administrative user account and you have forgotten the password, all is not lost. You can then follow the general recommendations for implementing user accounts in Vista that I will give you at the end of this post.

  All this requires a certain level of computer skills. You know better and that take the machine to a competent local computer tech (not a type of BigComputerStore/GeekSquad place) is the best solution for you.

  If you have an installation of Vista DVD (not a recovery DVDs), you can start the system with it. Select the default language, then select "repair your computer". Then select "Command Prompt". At the command prompt, type:

  NET user administrator / Active: Yes [press Enter]
  NET user [insert here the name of your user account] [insert the new password of user as 1234 here] [press Enter]

  [Note: do not enter the brackets!]

  Remove the installation DVD and restart the computer. Now, you will be able to connect to your user account by using the password that you set; for example, 1234.

  If you do not have a Vista installation DVD (only have a recovery disk), the computer mftr. may have given you the option to repair Vista (not a system recovery!) system in the diagnostic menu. This menu of diagnosis is the same one where you can choose Safe Mode. Get to this menu by repeatedly pressing the F8 key as the computer starts. If you do not have this option, you can make a bootable Vista file repair DVD in this link:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Note: All the Neosmart recovery disk downloads are torrent files. There is a good explanation of the torrent on the site Web of Neosmart files. You will need a torrent asmuTorrent client to get the files. Torrent client will download the .iso file with which to create the bootable DVD. You will need to use third-party burning software such as Nero, Roxio or the free ImgBurn (http://www.imgburn.com ) to burn the image .iso image file, not in the form of data.

  Once you have fixed things, log on to the additional administrative account you will be made by the suggestions below and disable the administrator account integrated yet for security reasons:

  Start Orb > Search box > type: cmd
  When cmd appears in the above results, right-click and choose "Run as Administrator" [OK]. Now, you will get the command prompt. At the command prompt, type:

  NET user administrator / active: No. [Enter]

  Exit the command prompt.

  General recommendations for creating users in Vista:

  You absolutely don't want to have only one user account. As XP and all the other modern operating systems, Vista is a multi-user system with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.

  In particular, you do not want one account user with administrative privileges on Vista because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult.  It is not impossible to activate the built-in administrator to rescue things, but there may be more that you want to do. Better not to put you in a bad situation at first.

  The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.

  If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:

  Start Orb > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  MS - MVP - Elephant Boy computers - don't panic!

• Mr President, I put in my window 7 Professional which I totally forgot the admin password, I'm not able to use my computer, is it possible to recover the admin password?

  Mr President.

  I got the admin password in my window 7 Professional which I totally forgot, I'm not able to use my computer, is it possible to recover the admin password?

  There is no way to retrieve a forgotten password. However, you can do this:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point until you have changed the password.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• I FORGOT the ADMIN PASSWORD FOR - (WEB PAGE) - HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

  Hi all

  I changed my network SSID & PW but I forgot the password for the printer web page.

  Password was written in a notebook and notebook is moved at the moment by the cleaning person.

  Please HELP! Is there anyway I can reset the printer so that the admin password is also re-set. I try to reinstall the software printers, also I am not able to change the ip address and right now, there is no ip address... get no link and no ip address and no network... Please anyone who can help... Please help.

  * I read some part... to power off the printer, then press the power button on... and continue pressing the back button where he would have, for some time the printer is back back (it was to reset the printer)... which is about 23 times... zero.

  I really want to THANK you ALL for READING THIS & YOUR TIME. So please help if you can...

  and ideas?

  Thank you, xxVEGASxx

  * xxVEGASxx *.

  You can do a reset of the printer using the LED screen on the printer.

  Select Configuration, then Tools, then restore the default settings. "Restore default settings" is the last element of the list and you will have to scroll down to see it.

  Which erases all settings, including the password for the printer.

  To reset you describe is probably the one mentioned in this article:

  http://resetprinters.com/how-to-reset-the-HP-OfficeJet-Pro-8600-premium-all-in-one-printer/

  but it's probably a deeper reset that you really need anyway.

  -Seth

• Laptop Pavilion g6: how to clear the admin. password for the installer

  After you have set the admin. password has decided to disable or 'clear '. I am able to change it but not delete or disable.

  No help for it?

  Thank you!

  Hello

  You can remove the need for a password as follows.

  Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to select the password option and press ENTER.  Enter the current password and then the new password, simply leave this blank and press on enter - do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

  Kind regards

  DP - K

• I need help to change the administrative password

  How can I change the administrative password when the computer was a gift and I do not know the password. I need the password to set anything in the computer, including the time?

  Can you log on under an admin account - any admin account? If this isn't the case, then you must ask the former owner for the password.

• I changed my admin password and he forgot what I do? I don't have a DVD for windiws 7.

  My laptop came with Windows 7 installed, I changed my admin password and he forgot what I do? I do not have the Windows 7 DVD and blocks for computer laptop while I try to ask password that I do not remember.

  See the guide to recovering lost password Windows 7 Home Premium account user, can't connect, connection problem

  Him begins the article with some basic steps you can take and then work upwards through more complicated methods where the easiest do not solve the problem. Please read the intro, but I think it will be the 8 method which solves your problem. Follow the precautionary measures later in the thread as well.

  You could be up & running again within an hour, probably less.

  If you have any questions, post it here; I'll keep an eye on your question.

• Resetting the Admin password not taking effect

  Hi all
  
  I use APEX v4.2 and inadvertently forgot password administrator apex. I tried to reset the password by executing the apxchpwd.sql as sys in SQLPLUS but modified past is not being recognized when I try to connect to apex_admin as the admin user. Could someone tell me what I can do to successfully reset the admin password
  
  Kind regards
  
  Kevin.

  Kevin,

  Do you have updated recently to an earlier version of the APEX by any chance? Are you sure that you run the script apxchpwd.sql APEX 4.2 and not an older version?

  It may seem like a stupid question, but I have seen this problem when you try to change the admin apex password using a script from an earlier version.

  -Keith

• Satellite 1000-S158 changed the BIOS password on an empty

  I changed the BIOS password on an empty (blank). I can't access the BIOS. Pressing on enter: it shows the error isn't the right password.
  How can I fix?

  Hmm. sounds you did something wrong maybe you misspelled or set a different password?

  Anyway, the point is that you are not able to bypass the BIOS password screen and in this case you will be unable to start Notepad.

  The problem is that you cannot remove the BIOS password, this can be done by a technician of ASP.

  In my opinion only technician in ASP can help you.

• Re: Equium M50 - do not know the admin password

  Need to run the recover console on my M50 pre-installed, but do not know the password - HELP!

  Hi loneraver,

  Why you n t know the admin password? Normally all passwords will be defined by the user, or in other words, I suppose that you have set all passwords.

  Unfortunately if you n t know the password more you have to reinstall the entire operating system. So take the Toshiba Recovery disk or the Microsoft disk to reinstall Windows.

• How to change the bios password remotely

  We're a lenovo shop all. (m58 and more). I'm looking for a way to change the bios supervisor password remoetly. I found the WMI and the PDF orders to go with them but when I run SetSupervisorPasswordRemote.vbs I get "Microsoft VBScript compilation error: due to end of the statement"I am not very versed in VB so im not sure how to solve this problem. "

  If not is it possible to take this back to powershell and use it to change the bios password?

  Hello aford89,

  Although the follwing linked to the thread is on T450 ThinkPads the answer is the same across the range of product; You can only do this if you have already set a password manually.

  https://forums.Lenovo.com/T5/enterprise-client-management/setting-BIOS-password-in-SCCM-task-Sequenc...