Concurrent Manager problem after cloning

Similar Questions

• Services Windows problems after cloning a HARD drive

  Hello

  I recently cloned my HARD for one SSD drive, using the SSD as my boot device. Since then, I was able to successfully access Windows services.

  For example, I've tried to expand a partition on my SSD and went to computer management. I got a message saying that it

  "cannot open log events on the computer service.

  I click OK and the computer management opens.

  Clicking on device management, I get a long enough message that appears that says

  'Disk management could not open Virtual Disk Service (VDS) [name of the hard drive]. This can occur if the remote computer does not support VDS, or if a connection cannot be established because it has been blocked by a firewall of Windows. For more information see on diagnose and correct this problem, see Troubleshooting Disk Management by using disk management. »

  I click OK and the message disappears.

  If I click on Services and Applications in the left pane I get WMI control and Services in the central pane.

  I double-click on Services, scroll down to virtual disk, double-click anywhere on the line, I get

  "Windows could not open the service of virtual disk for playback on the local computer. Error 1726 the remote procedure call failed. »

  Is someone can you please tell me what is happening? What have I done? Why am I not able to access disk management?

  I tried sfc/scannow and I get the message

  "Protection of resources Windows could not start repair service".

  EEK! What have I done?

  Thanks for the help, but I thought about it.

  I had turned off by mistake in my BIOS PATA, and causing the problem.

  Thank you for taking the time to respond, however. It's very appreciated.

• Problems after cloning

  Okay, so I bought a Seagate 1 TB computer laptop SSHD. I cloned my current drive to seagate DiscWizard using disk. After that, I checked the Seagate drive in my computer, and only the system reserved partition has shown. It's a 160 - something together, so I checked the drive in disk management and I found the rest of the disc, but it was assigned. That's happened?

  Hello

  You will need to ask Seagate about it, because it is their software.

  Read the how to use section:

  http://www.Seagate.com/support/downloads/DiscWizard/

  See you soon.

• How can I solve the RDP and SQL problems after cloning of a paralytic?

  I got a job Server 2008 R2 system running SQL Server Enterprise 2012 all on an 8 G/4CPU VM and did a ' copy to ' VAPP Cloner.

  The new VAPP has been on one VLAN separated. During the copy process, customizing of comments was shortlisted, and I gave the new virtual machine, a new name for the machine. I can access both VLAN via my WIndows 7 x 64 desktop client OpenVPN.

  So far so good, I could use the vDC to log on the new machine of vApp using my previous administrator credentials.

  I found myself with two problems though...

  (1) none of my previous connections will work with SQL Server, when I try to launch SQL Server Management Studio. I get a message saying "Connection failed for user 'newmachine\user'" so maybe the MSN usr for duplicate users are not the same as the original sid user? I think that he could not tell the difference, if everything has been cloned and the machine name has changed.

  (2) my RDP 7 Windows client does not connect unless I have configure the new server to allow "a MOP" instead of just "Network Level Authentication" that has been configured on the original server that I cloned from. When I activate "all RDP" I can RDP into the cloned fine system.

  The cloned machine had the new name of the machine and a new SID assigned by the cloning process. The original and clone are on VLAN isolated and cannot see. Both not use areas and working groups.

  If I leave the cloned server THAT RDP "NLA" value only as the original server, my Windows 7 client gets a message complaining that RDP does not support the NLA for the cloned machine. RDP works fine connecting to the original server that still has not specified NLA. The RDP instance that says I need enabled NLA, watch NLA is activated in the about box.

  Someone at - he saw either of these issues? Any suggestions?

  Thanks, Dave

  Hi, my understanding is that sysprep does much more than simply by changing the SID of the box, it will also use the SID to regenerate the local MSN accounts system which is problably the origin of the problem, you're experiency. This is done for the security reasosns avoid guests who have accounts with the same sid on different machines. There is a tool called newsid that changes the SID of the server and let the system SID accounts because they were, but it has been known to have other issues but allow him to achieve what you want? I thiknk MS have retired it now, but you can always download on the net.

  If you need get SQL running sysprep and want to automate the process to set up your DB and users following post useful:

  http://msdn.Microsoft.com/en-us/library/ee210754.aspx

• APP-FND-01564: 12537 in AFPCOA after cloning ORACLE error

  The concurrent application fail after cloning EBS 12.1.1 version and database 11.2.0. All requests end with when I clicked on view log it says FILE SERVER has NEED of BEING RE INITIALIZED.
  
  I checked competing newspapers in backend for individual on the journal entries are lower than demand
  
  APP-FND-01564: Error ORACLE 12537 in AFPCOA
  
  Cause: AFPCOA failed due to the ORA-12537: TNS:connection closed
  .
  
  The SQL statement being executed at the time of the error was: and was executed from the file.
  /Data/clone1011/apps/apps_st/appl/BOM/12.0.0/bin/CMCTCM
  Program exited with status 1
  Successfully submitted again simultaneous program CMCTCM with request ID 20217055 to start to October 17, 2011 12:10:06 (ROUTINE = AFPSRS)
  
  
  ---------------------------------------------------------------------------
  Options, AutoComplete, the request for enforcement.
  
  Size of the output file:
  0
  
  
  Output is not printed because:
  The option has been disabled for this report.
  
  
  End of query options AutoComplete.
  
  ---------------------------------------------------------------------------
  Simultaneous request ended
  Current system time is October 17, 2011 12:07:30
  
  ---------------------------------------------------------------------------
  
  
  All services are increasing and running and all the managers are working well. Please help me
  
  Thanks in advance
  
  Published by: sairanga on October 17, 2011 12:32

  Salvation;

  Please close all services, in step 2 and 3 to follow:
  Not to own non-existent nodes or addresses IP of FND_NODES [ID 260887.1]

  Question of retest

  Respect of
  HELIOS

• Problem Manager of the Oracle Applications after cloning 11i

  Hi all
  
  After cloning ebs 11.5.10.2 from AIX 5.3 to AIX 6.1, I have problem with OAM.
  When I call OAM, after logging in, I get a blank page with Oracle icon in the upper left.
  It seems that everything works fine.
  
  Acces_log, error_log is not an error message.
  
  Really appreciate your help
  
  Thank you
  Boris

  I have another question.
  Is it posible to install IAS 10 g (10.1.2) on the same server where is installed EBS 11.5.10.2. OPERATING SYSTEM: AIX 6.1

  It is possible (provided that install you in the new ORACLE_HOMEs and you have sufficient resources on the server), but this is not recommended.

  Installation of Oracle Application Server 10 g with Oracle E-Business Suite Release 11i [ID 233436.1]
  Oracle Application Server 10g with Oracle E-Business Suite Release 11i troubleshooting [ID 295606.1]
  Oracle Application Server with Oracle E-Business Suite Release 11i FAQ [ID 186981.1]

  Thank you
  Hussein

• Huge problems after updateing to 31.1.2

  Hello

  I encountered several problems after the update to 31.1.2.

  1. I can't send emails from one of my accounts, or it only downloads the messages from this account. When I connect to this account's web e-mail messages are there. When I try to send the mail, I get the message:

  The message send failed.
  The message could not be sent using SMTP server mail.vista - consulting.hr for some unknown reason. Please check that your SMTP server settings are correct and try again or contact your network administrator.

  I have control over the mail server and reflected on the Messaging log and it said:

  2 Oct 17:08:37 droplet postfix/smtpd [10916]: connect from unknown [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: lost connection after unknown STARTTLS [xxx.xxx.xxx.xxx]
  2 Oct 17:08:37 droplet postfix/smtpd [10916]: disconnect from unknown [xxx.xxx.xxx.xxx]

  When I try to send mail.

  2. the update of enigmail and ligntening had stuck somhow. In the Add-ons Manager window, I see the old versions and new (lightning 2.6.3 and 3.3.1 enigmail 1.6 and 1.7.2). However, the new versions has dimmed. Restaring Thunderbrid does not help.

  3. all my entries in the missing calendar which is a very big problem for me.

  Best regards

  Andrija

  Close Thunderbird and go to your profile folder.
  There is a subfolder "extensions".
  Find the folder for both the lightning and Enigmail under "extensions" and delete them.

• Satellite L50 - A - 1 6 - DVD problems after upgrade to Windows 10

  As the title, the player is normally recognized by the system, but put any media in the drive is not read and that is why it is always empty.
  What could be the problem?

  Thanks to you all

  I guess saying DVD player you mean the STRANGE-> optical disc
  First I would recommend you to check this page for troubleshooting MS:
  https://support.Microsoft.com/en-us/...drive_problems

  It fixes the problems with CD or DVD players that cannot read or write media

  In addition you can uninstall/remove optical drive from Device Manager.
  After the new reboot, Windows system must be able to recognize the STRANGE new and usually the most recent driver must be installed also.

• Windows 7 - problems after Windows updates

  When Windows Update 17 new "updates", it due to my new HP computer to not connect to internet.  I talked to HP two hours Monday, 18th and thought we had set.  But the updated Windows Update during the night and the next day he couldn't connect to the internet.  Two hours with HP and finally the gal thought it would be better if I have the option of not accepting updates, or accept only updates Windows or HP.  I did today and do not connect to the internet.  Whenever I have to restore to October 16, which is the last time, he did not work properly.  Help, please!  Thank you...

  Have you tried running the resolution of Internet connection problems after these updates?

  Click Start, type: Troubleshooting

  Press enter on your keyboard

  Do a search for Internet connection

  Double-click the Internet connection problems and follow the wizard to display on.

  Using Windows - Management, configuration, and troubleshooting updates
  http://www.windowslive.com/connect/post/59e9b812-d92c-4dc7-B53C-c1a9ee5bcaf3

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• HD T410s graphic problem after update

  A few days ago, I decided to update my 2011 T410s by Lenovo
  Toolbox. I was looking for solutions to improve the battery life. I have
  has chosen to update all 'important' and some option updates
  those I thought that could have an impact on the battery life (BIOS update, Intel HD graphics driver, thinkpad power management driver and a few others)

  Since I have lived a graphic break several times when I watch videos online such as
  thedailyshow.com or youtube.com. The first time a
  a message on the graphics driver (or something like that)
  has stopped working and has been restored but the next second the
  ventilation was repeated, monitor would go black and the
  graphics would begin slowly reappear, I'd still get a message
  on the graphics driver and the other second monitor would again
  black and so on... Now, I only get the message more difficult when it happens from the computer retrieves before leaving black. The only way to break the cycle is to restart
  the computer and everything works fine. Until I have watch another video. ! I tried uninstalling the driver HD and reinstalled (both reinstalled as Lenovo and Intel), and it still does not work.

  Suggestions? Is someone else had problems after updating?

  Please uninstall the display driver, and reinstall.

  Also, install the latest player adobe flash.

  Please watch the video file online and then check it in.

  Best regards

  Tanuj

• Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

  Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

  My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

  Hello

  Step 1: I suggest you perform the SFC scan on the computer and check.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. right click on cmd in the list programs and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• Problems after installing KB978338 on Windows Vista SP2

  I met a problem after installing KB978338. The update installs without error or problem, but the system is extremely inadmissible after the reboot. The "\Windows\system32\config\systemprofile\desktop is not accessible" error, and the system is practically unusable. Normally opens the Task Manager and system seems inactive, but you try to start a new application from the Task Manager gave an error "hose is not valid.

  System is Vista Home Premium SP2 installed without any obvious problems before the update. Start the system restore and go back to immediately before the update of the results in the system back to normal functionality and responsiveness.

  I've never seen or either of these mistakes before and my research has not yet been able to find something similar, so I am at a loss to start this kind of problem with an update of troubleshooting.

  Please tell us how can I still troubleshoot or solve this problem.

  Thanks in advance.

  JohnBrown

  Halifax, NS

  So I "hid" the update and you call this one closed without resolution.

  While the overall rating of gravity for KB978338 is moderate (critical vs), it of still a security update and must be installed.

  Repost:

  See the section "How to get help" of http://support.microsoft.com/kb/978338

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Purchasing problems of installation of the security updates Microsoft may also visit the following page for assistance:
  https://consumersecuritysupport.Microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• communication manager fails after installing vista 64 sp1__

  communication manager fails after installing the vista 64 sp1. If I try to uninstall the sp that the entire system crashes

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 Task Manager problem

  When I type Ctrl alt delete to bring up Task Manager, I used to get a screen with a tab for the task and a tab for the process with the familiar red x in the right corner to close it. Last week I didn't notice that running tasks would come to the top and the processes tab and close x were not on the screen. Today, so that the tasks displayed I right click and choose the process now, I can't see the tasks and the narrow red x is not yet on the screen. I installed the Windows updates on 10/11/15 and I noticed the problem after the installation. Maybe it's a coincidence that the problem appeared after the update, or it may be the cause. Any suggestions on this matter will be greatly appreciated.

  You are in mode 'small footprint '.  Double-click anywhere in the border of the Task Manager window and the familiar interface should reappear.

• Problems after updating to Windows 8

  I had some problems with my new laptop so I decided to try the «Refresh your PC» function Doing so brought on a slew of new problems which I had no chance to solve on my own. I hope someone knows what to do with this mess.

  After "refreshing" to my PC, my laptop wouldn't let me:
  Install anything (downloads are OK, though)
  Programs open (with the exception of Internet Explorer)
  Applications open
  Open C: /.
  Open the laptop settings
  Solve problems ("an error has occurred during troubleshooting.")

  It became obvious to me that the majority of these problems were because the updating of Windows me rid of my administrative privileges.

  I tried to solve this problem with every idea that I had and every suggestion I could find online. The problem is that my phone won't allow me to do anything to capture administrative privileges.

  Here are the solutions I tried:
  'Change the Type of account' in the user accounts: parameters show that I am already administrator.  The 'Standard' option is greyed out. Nothing to do here.

  Using a command prompt: everything I try, I get the "Network Error" result... "Windows cannot access to ' if I get" net user administrator / Active: Yes "I received the reply"the system 5 error has occurred. Access is denied. "I can only assume this error occurs because I'm not an administrator. If I try to do "sfc/scannow" it says "You must be an administrator." However it won't let me run cmd as administrator.

  Exchange User Account Control: the bar is set on "notify me only when...". ». I can drag down to "Never notify", but when I try to click on 'OK' will not just pass by. I could click OK all day and nothing will happen. No error message.
  Create a new user: hit this button head to PC settings, which does not, as previously stated.
  Clean boot: Msconfig will not open, I get the error message "network error". Windows cannot access.
  Switch to the Microsoft account: 'Users' directs 'PC settings", which is an application that does not open.
  CHKDSK: whatever it is, I have no idea, but it does not open.

  If I try to "Run as Administrator" on any program, it simply doesn't. No error message.

  I reached the end of my rope after trying several solutions more that hasn't worked and tried to do a system restore. System Restore does not open. I get the error message "System Restore could not start." I would try to solve the problems, but as I said troubleshooting will not, work almost everything also, runs to the PC settings application, which does not open.

  None of these problems existed before I did the update of Windows, so I can only assume what caused their - which is a little disconcerting.

  Any ideas on what to do?

  I had this problem after that refreshing of my pc, if yours is the same (if it could even be your best solution) you will need to make a new account

  Windows + x

  go to "Control Panel".

  go to "user accounts and family safety."

  Press 'user account '.

  Press 'manage other accounts '.

  In light blue shades near the bottom, it says "add a new user".

  Follow all instructions after that to make your new account

  Sorry I couldn't be more helpful. If all else fails, it's the only way I know how to deal with it

  E-mail address is removed from the privacy *.