Convert the .swf in .mov

Similar Questions

• Convert the .swf

  I'm trying to convert .swf to .mp4 - I know that sounds stupid - but I don't know how to do this.

  D

  You do not have the native video in MPEG, MOV or AVI?

  Online video converter

  SWF is not a video file.  It is a shockwave file.

  Nancy O.

• Cannot convert the SWF into a MovieClip

  I have a problem when I have a project as3 loading in an AS3 SWF that contains an another AS3 SWF containing a videoplayer, and I am getting error of failure of type coercian as above.
  
  TypeError: Error #1034: Type coercion failed: cannot convert work_client_overlay@39e9e0b1 to flash.display.MovieClip.
  to WorkClient / externalLoadComplete)
  function / http://adobe.com/AS3/2006/builtin::apply()
  to MethodInfo-(37)
  
  usually, when I load in a SWF file I put something like
  
  mc:MovieClip - new MovieClip() var;
  MC = MovieClip (ev.currentTarget.content) //where ev.currentTarget is a charger
  
  Then, I find that I can trigger functions in the SWF file that is loaded using the
  MC. SomeFunction();
  
  but this does not work in this case and the only reason I see is that there is a videoplayer loaded inside the SWf I am loading in...
  
  Any help would be greatly appreciated.
  
  Greg

  I solved it. The main class of my loaded SWF needed to extend the MovieClip and it prolonged only Sprite.

• How to restart the SWF into Movie Clip (loaded via .loadmovie)

  Hello

  I have a flash document that calls a .swf file in a clip via the .loadmovie command.  The .swf plays throughout in the clip, but it has problems with the button 'replay' at the end. He's not letting go taken of all shares of the first piece and doesn't charge properly.  The .swf completely restarts itself, he uses this code to replay:

  {We (Release)}

  _root.gotoAndPlay (1);

  }

  but once the .swf is loaded in the main flash file, the "replay" button no longer works.

  Can someone offer you actionscript that I can apply the button at the end of the .swf that will allow him to play again when it is loaded into the movieclip in the main FLA file please?

  Thank you very much in advance,

  Ginger

  Put it in the first image of your main timeline, so it runs before all references to _root are executed.

• FLV embedded on the timeline is fuzzy when you export to SWF or MOV format

  I have a fairly large flash video I've been working in Flash Professional CC, and as well as of many internal timelines, masks, events audio and the like, there are a few embedded FLV files. FLV files are recordings of screen with no audo who were converted from MP4 to FLV format with the help of SOUL. These files are crisp and clear when played from their location on the hard drive. I imported in my library and they fell into their own respective layers on the timeline. When I rub along the timeline, working on my paper, the images are clear, without loss of image quality. However, for some reason any when I use export or publish, ensuring that I have my settings using the highest quality, these built-in FLV files is blurred when they play. All the lines seem to be pixelated and colors are slightly dimmed. I have to know why this is happening, although I guess that it has something to do with the integration of videos rather than streaming them, or the publication settings...

  As an info, my ultimate goal for this video must be uploaded to Youtube. It is a separate issue to the one above, but, bonus points to someone who can help me understand how to get this done effectively. The SWF file is 9.8 MB, but the MOV file becomes 5.5 GB for some reason any and I can't find a way to convert the SWF in a usable format (such as FLV or MP4) for youtube which is not record screen (I use camtasia, which results in a loss of framerate) or an expensive converter program that does nothing else in fact simply to make a record under the covers on the screen.

  Sorry to repeat myself, but Flash isn't at the height you have in mind.

  1. long (> 30 seconds) a calendar associated with videos/Animations will most definitely get out of sync.

  2. precompresses videos will look even worse than the original (as you have already learned)

  3. you are in constant danger of Flash crashing over your Gets the chronology and videos you embed, at this point simply scrub the timeline poses a high risk to get flash to crash and destroy your complete work.

  Believe me when I say that you would be better advised to import all these videos and Audiotracks in after effects/creation/Premiere elements, and then export it for purposes of youtube.

  If you must use Flash:

  All the instances value video bitmapSmoothing the property and see if it improves quality.

  so, if video1 starts on frame 1 and video2 on chassis 155

  Insert the following lines of Code to the keyframes 1/155

  VIDEO1.bitmapSmoothing = true;

  VIDEO2.bitmapSmoothing = true;

  and so on for all the videoinstances

• convert a SWF, mov quicktime file

  I created a SWF using Flash and convert a mov file. I watched a training video and under publication settings > Format their should be a mov Quicktime option. I don't have this option on my version of Flash CS5. Also, if I try to export to a mov file, nothing happens. I have QuickTime Player version 7 on my computer. He doesn't appear as an option in Flash. How to convert a swf file in a mov file without go online and buy a converter?

  Which option do you to stop the export? After the last frame or time elapsed? If you used after the last image, that's probably why. Try to use after that time and try again.

• Microsoft has a utility to convert the .dbx to .pst? All of the utilities that I see are either paid utilities or demo moves only 5 messages at a time.

  Laptop with Inbox.dbx corrupted. Freezes most of the features on laptop to go into OE.  Renamed folder Outlook express to Outlook Express1. Reopened OE and it has created new folders and Inbox... No questions or shutdowns. Renamed the new file dbx Inbox as dbx1 copied the original dbx file to the new location... Lock of the same question.  Now I want to watch third tool third to try to convert the old dbx file to pst or recover emails to the new location of the Inbox.  All of the suggestions.  I am looking for a free tool that allows for more 5 messages to convert at a time.

  Only the first tool here is free. I didn't lnow on his speed.

  Macallan Outlook Express Extraction:
  http://www.insideoe.com/resources/tools.htm#Macallan

  DBXtract:
  http://www.oehelp.com/dbxtract/default.aspx

  DBXpress: {much faster for large files}
  http://www.oehelp.com/DBXpress/default.aspx

  **********************************************

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the processors and causes a multitude of problems such as time-outs and account setting changes. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. What this means and how do I continue to Word so I can edit pdf

  When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?

  Hi wayned76005641,

  You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..

  You can also use this online https://cloud.acrobat.com/exportpdf service

  Once the PDF is converted .docx file you can edit in MS Word.

  Kind regards
  Nicos

• How to play FLV (or convert to SWF format) for the web

  I have Flash CS3, but currently using a trial for CS5.

  Measures so far:

  1 created the slideshow with all transitions, animations, etc. in Powerpoint 2010.

  2. exported to .wmv (using powerpoint)

  3. converts to FLV with Adobe Media Encoder (CS5).

  The FLV file plays a lot on my system (stand-alone), but I don't know how to play on my site.

  If there is a way to let him play on a Web site, can I also remove the control bar.  It is not interactive.  I want it to autoplay, loop and continue where he was, when people go to another page on the site.  It works with swf files I've worked with in the past, but I have used other software that I bought to convert pictures or animations as swf.  That technology has not stayed current with newer versions of software, so I try to use Flash for this, but I am now lost.

  I tried to find a way to convert a SWF, because I think it would be easier to work with... but I can't figure how to get it in Flash.

  If anyone can help.  I tried to figure out how to do for a long time.  I feel so close, still blocked.

  Thank you

  http://www.republicofcode.com/Tutorials/Flash/video_flvplayback/

• Imported from the SWF actionscript does not not in the _root movie...

  Hello.
  
  I'll tell you below what I want to accomplish, then I'll tell you what I did (which did not). I hope someone here can tell me where I was wrong and also how to fix and remove what I'm trying to do. Thank you!...
  
  WHAT I want TO DO:
  I want to have a Captivate SWF loaded in the bottom half of a main SWF Flash "shell", and then when the Captivate SWF is done playing, a text field on the "shell" SWF hand puts the word "DONE!" inside.
  
  WHAT I HAVE FACT (which does not work):
  I have a Flash SWF that loads a SWF from Captivate3 file into its bottom half (which works fine). Half upper main Flash animation has a field of dynamic text on this subject called "doneText_txt".
  
  I then did another SWF is just 10x10px and what is on it's ActionScript on the first frame that says:
  
  _root.doneText_txt. Text = "FINISHED!"
  
  Then, I went on the last slide/image in my Captivate project (in Captivate) and did a "Insert-> Animation" to insert this little SWF of 10 x 10 on the last slide.
  
  When I load that main "shell" and then the Captivate project load down and finished, nothing is displayed in the text box "doneText_txt".
  
  THINGS I noticed:
  When I import the SWF file in Captivate, it was transparent (has not appeared). I adjusted the transparency on this (in Captivate) to 0% and 100%, and it has not yet posted. I thought it might just be because it had nothing on it (just the default white background), so I went back in Flash and re-exported the SWF 10 x 10 fill with black. I have re-imported in Captivate, and yet it does not appear. Like, I thought you'd see a black square on the slide. He was on the timeline and I could move around the slide, but it was just a transparent box. This made me think that the reason that the text "DONE!" was not get past was because there was a problem with the same SWF file being on the slide in the first place.
  
  Any ideas? Or, if there is another way to remove what I try to do, it would be fine with me as well. Thank you!!!
  

  I FOUND A SOLUTION!

  Instead use:

  _root.doneText_txt. Text = "FINISHED!"

  I added a bunch more "_root" s in it like this:

  _root._root._root._root._root._root._root.doneText_txt. Text = "FINISHED!"

  And it worked!

  I guess that the SWFs you load into Captivate actually (backstage) loaded into Captivate swf themselves, so there are one bunch of other levels of _root that needs to be reached. To be sure, just to throw a bunch in there!

• video looks like much until the converted to swf. unwanted leaves on slides

  I am using Captivate 5 in TCS3 on XP.

  This is my first attempt of making videos.  I'm pretty happy with the final result, except that there are shadows of widgets on slides, where they should not view.  For example, there is a slight outline of the text boxes and drop-down lists on slides that do not have them.

  I suspect that there is some sort of adjustment must be defined when I generate the .swf, but I don't know what it is.

  Thanks in advance for the help.

  Something I found also can cause this 'ghost' of objects on slides following is compression in project settings: size SWF and quality.

  So I try to disable all the compression options and then publish to see if she gets rid of the afterglow.  If Yes, I have on them again one at a time, editing in between to see which option brings back them.

• Error: "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder.»

  I'm trying to export a Flash video. I get this message

  "Quicktime may need to be installed in order to display or to convert the video in Adobe Media Encoder."

  Despite the error message, it "seems" and spits a mov file, but only the audio crosses (the video is all black).

  I use Flash Professional CC, but older versions (CS6) seem to have the same problem.

  Some tips on how to export as swf no Flash?

  Thank you!

  I would still choose not to send the video through Adobe Media Encoder, which can stop the error message.

  What is your scenario? Video export cannot export integrated H.264 video. If you do animation and audio to go on top an existing H.264 format video, export, but make sure the alpha box set when exporting. Then, you can combine the old movie H.264 with the animation and the sound you made in Flash.

• Convert Flash .mpg or .mov file?

  Hi, I'm only to learn Flash on my Macbook and have a great time to make my first animation in 3 minutes (using redraws especially frame by frame with a few interpolations of movement and alpha-fade symbols in the bottom layers). The audio layer is a recording of a 5-verse song .wav file, and I was able to copy images and paste a lot for layers main animation because many key actions repeat with each verse. I recruited musician friends to sing for the soundtrack and everyone was very excited for the final result. The thing is, is a current-events response and the idea was to post it on YouTube for all our friends and family could see him and forward before the election - waiting too long and it won't it's funny because it will be irrelevant.
  
  However, when I finished it and it plays perfectly in my .swf files, I went to export and ran into two problems:
  1. first of all, Youtube requires additions to be in .avi, .wmp, .mpg or .mov format. In the dialog "export movie...". ', Quicktime format is the only option, given that would produce one of the required formats for Youtube, the .mov file. But while export was complete, I saw the movie in Quicktime player and found that the Visual and sound were completely out of sync. It was the first problem.
  2 desperate, I dropped my master final dossier and resigned myself to using a more early registered version of the FLA which produced a .mov file synchronized. But when I downloaded on YouTube, the result was the Visual torture. Instead of a video, which played was a slide show - while the sound played at normal speed, the animation was only stills: a single image would fill the window, and the gel, and then another would replace a little later, and so on, leaping 50 to 100 between each frame executives who appear. No rabbits singing, no Governors smile...
  
  I don't know if the problem is something to do with the frame rate adjustment, or if it is to find the right converter, but if anyone can help, I would be very grateful! A friend was able to put the .swf file place on its website temporarily, so if it's useful, you may be able to see it
  http://cremonea.NET/images/Flash/McPalin.swf
  
  Thank you
  Gillian

  I had a great answer to the question of conversion when I asked again a few days later. The answer is HERE.

• Convert. AVI to MOV?

  I have an infrared camera that captures 30 second videos in the. AVI format. I can import and read these. Fine on my iMac and iPad AVI video files. (imported photos on iMac)

  However, I have these. AVI files won't play on my iPhone.

  Advice on:

  1.) how to play an AVI file on iPhone?

  or

  2.) how to convert. AVI to MOV or any other format that is iPhone compatible?

  Thank you.

  iPhone iOS 9.3.3

  Use the QuickTime Player or MPEG Streamclip to convert. You may be asked to install Perian or other component.

  (143799)

• can I convert the option to choose in applescript in Automatic Configuration of the action folder

  Hello

  H I have an applescript script that is a sort of an image file and fix it to the sage according to uniqueness of the folder names.

  In this script I choose the folder option, but I want to convert the option into action automatically as a file configuration. as

  on the addition of items in folder to this_folder after receiving of these_items

  Here's my script

  d choose the game folder

  _main ({d})

  on _main (argv)

  o script

  property ff: {} - list of aliases

  property gg: {} - list aliases to be moved by prefix

  nn property: {} - list of file names

  mm property: {} - list of prefixes

  property mm1: {} - separate prefix list

  Repeat the operation with d in the argv - by source directory table

  d to g-d content of the kit

  -retrieve the list of aliases and names for document files

  Tell application "Finder".

  say g-d document files to set point {ff, nn} to {it as list of alias, the name}

  tell the end

  Try

  value {astid0, delimiters of point for the AppleScript text} {of AppleScript point text delimiters {'_'}}

  Repeat with i from 1 to count my nn

  the value {n, m} {my point nn i, ' "}

  If (count of n textual elements) > 1 then set m ' "& n text items 1 thru-2

  put end my mm m

  If m ≠ "" and m is not my mm1 then put end my mm1 m

  end repeat

  the text value of the point astid0 delimiters AppleScript

  errors errs errn number

  the text value of the point astid0 delimiters AppleScript

  error number errn errs

  try to end

  Repeat with m in my mm1 - with separate prefix

  m to m content of the kit

  -prepare the destination for this prefix

  Try

  Set dst as string d & e & ': ' as an alias

  There is no error number-43 - dst

  Tell application "Finder" to set the dst (make new folder d with properties {name: m}) as alias

  try to end

  Repeat with i from 1 to count my mm

  If my mm point i = m and establish the end of my gg to my ff I

  end repeat

  If gg ≠ {} then tell application "Finder" to move the gg in dst with the replacement

  Gg to {} set

  end repeat

  end repeat

  end of script

  say o to run

  end _main

  so if support convert this script for folder action script please help to do.

  Thank you

  Rakesh

  You just need to provide multiple ways to call your manager, for example:

  on run -- application double-clicked or run from the Script Editor
    set d to choose folder
    _main({d})
  end run
  
  on open droppedItems -- items dropped onto droplet
    _main(droppedItems)
  end open
  
  on adding folder items to this_folder after receiving these_items -- folder action
    _main(these_items)
  end adding folder items to
  
  on _main(argv) -- main routine
    -- whatever
  end _main