Similar Questions

• Except for the previous version of 2015 caused problems

  Hi all

  I made a race of CLD practice using the example of irrigation system. I I built in 2015 of LabVIEW and saved for a previous version of LabVIEW 2014 before posting in the forum of Certification for the comments. When it was opened by another member through 2014, delimited reading Spreadsheet.vi is not found. I can't reproduce the error because I do not have an installation of 2014. The original thread is HERE. I enclose my original draft of 2015 as "Registered for previous" version 2014. Also attached is a screenshot of the attempt to open the 2014 version. This could be a problem with the backsave?

  Thank you all.

  Dan

  Read from a spreadsheet file is obsolete and replaced by reading delimited spreadsheet.  It is actually planned to break.

• Programs of the development of the application during flight and causing problems; How to disable?

  Currently, I am having a problem where on Win 7 where other applications will steal focus away from what I do, no matter whatever it is, I do. This can range from the annoying popup on demand to restart my work station. The latter has become an obstacle to the point that some people in my office, including me, are considering filing for damages. The reason is that some applications will ask to reboot to apply updates when I type an e-mail, finishing a piece for marketing, or generally doing limited work. If I happen to hit most of any key during this time, it will automatically select the 'Yes' or 'Restart now', which led to the lost emails, went work because it has not been saved, or even calls dropped at a meeting. Where the logic behind the deposit for damages.

  However, I wanted to ask if there is a way to prevent applications from stealing the focus and the opportunity to respond to the entry they should not receive? Prior to Windows 7, I know that there was a way to RegEdit values to prevent them from happening, but they have strangely removed from Win 7, which brings me to my question here. Y at - it another way to stop the apps coming to the fore and interrupt our work, or is it just a flaw in the system that has no solution?

  Hello

  Thank you for the follow-up. I suggest you to post this question in the TechNet forums. It's because it's a consumer forums and questions where computers are connected to the corporate network or is defined under the policy of the company are best handled by the Technet Support team.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this helps.

• The hyphen in the name of XML line causing problems

  I have an xml file that I am turning into a qury object so I can have the query interact with my SQL database

  The XML file has 15 lines and got 13 of them successfully in a query.

  The problem is that 2 other fields have hyphens and dashes - in line names. As (WORK_E-MAIL)... See the - between E-mail

  So, when I go to the value in the query with this code

  < cfset temp = QuerySetCell (orderquery, "WORK_E_MAIL",

  #mydoc.rowset.ROW [i]. WORK_E-MAIL. XmlText #, #i #) >

  I get this error message

  Error occurred while processing request

  Invalid construction: arguments or name is missing.

  Is it possible to alias the line name with the hyphen, maybe like this {WORK_E} MAIL or this [E-MAIL] WORK_E

  I need ge cut these 2 lines named in my application.

  Any ideas?

  Have you tried to use the syntax assosicative?

  MyDoc.rowset.Row [i] ["WORK_E-MAIL"]. XMLText

• Use of the JRE instead of JInitiator causes problems of development of mouse for Oracle Forms

  Hi all
  
  We run Oracle Forms application based using JRE instead of JInititor.
  
  (1) the application is run on an individual laptop with Windows XP SP3 as an operating system.
  (2) with the help of oc4j of Oracle Developer Suite 10.2.0.1.0 to run the application
  (3) JInititor is more used and JRE version 1.6.0_26 or JRE version 1.6.0_27 used to launch the application. It works very well.
  (4) the browsers used to access the applicarion are IE8 and Mozilla Firefox 8.0.1
  
  Questions:
  (1) cannot have the focus of the mouse on an item. Even when the cursor seems to be in another element, for example after ctrl + E, point B article content watch editor has (which is the first on the form).
  (2) the LOV on any item shows what brings the LOV on section (first one on the form).
  (3) we are forced to use the keyboard to access the respective item all the time.
  
  Can anyone suggest a solution to this problem?
  
  Kind regards
  Aparna

  HELO,

  You, normally I think shoud upgrate to the version of forms 10.1.2.3,.

  François

• Use the tag break html or CSS?

  I have a page on my site where the last two floating images caused problems. Because the text next to each other was not very long, the images got too close and broke the page layout. I did a miracle by inserting some HTML break tags, but I wonder if a more professional practice to created an ID or a CLASS by adding the bottom margin more paragraphs next to the photos?

  http://www.keithpurtell.com/kthings/Jack-Vance.htm

  Use HTML to structure your page titles, paragraphs, lists etc. It provides connections for CSS do its job.

  Use CSS for all Visual presentation such as the layout, margins, whitespace etc.

  There is very little reason to use
  Tags on CSS.

• Event Viewer windows will cause problems with your computer

  Windows Vista Ultimate: Will be the windows event viewer are causing problems, such as freeze ups, slow down, with your computer?

  There is never for me, and I never heard him make.

  I hope this helps.  Good luck.

• Frequent hard drive exchanges are causing problems for activation of Windows 7?

  I am new to Windows 7.    I frequently switch (turn) the hard drive on my system - say every 6 weeks or more.  I use the same set of 2-3 disks and restore my system from a disk image every time when I exchange them.   Change the drive often happens to cause problems with the activation of Windows 7?   Thank you.

  Hi Lone Star,

  Change the hard drive on systems not prompt swap you for activation but after that the HDD on another system if the operating system is validated activation would be asked that the physical address of machines would have changed.

• in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  in iBooks author, how can I change the book ID?  I update often books and hand but ID remains the same, so it caused problems when others discover.  I wish it were as if it were a new book with a new code.

  From the link 'related items' below, see:

  Give your book a new internal ID.

• In Windows XP, the $ntUninstall directories can be deleted without causing problems.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  I have Windows XP SP3 POS PC in our retail store lcocations.  These machines have a slightly smaller boot partition.  My question is, when you install updates from Microsoft, it creates an uninstall directory in the Windows directory.  So Windows XP, $ntUninstall directories can be deleted without causing problems or causing previous updates to be reinstalled.

  The article at the link below gives a detailed explanation of the $ntUninstall directories. This should you guide as to whether or not you can remove folders.

  http://ask-Leo.com/can_ntuninstall_folders_be_deleted.html

• It will cause problems if my new iMac has the same id and password that my old iMac that I still have and use

  It will cause problems if my new iMac OS 10.11.3 5 k has the same user id and password as my old 2008 imac OS 10.9.5

  No it just means that you can download and sync past purchases and data to iCloud

• Problem with the tag 'Bld_localDestDir' setting before generation VI: project gets registered in previous localDestDir.

  Hey all,.

  I write a VI before generation that updates the destination of the building (and other elements, but we are ignoring those which for the moment). This pre-generation vi, when it is running, enters the Destination of the tag "Bld_localDestDir" directory and modifies the directory by incrementing a version number.

  The issue I'm having is that after the pre-build vi is executed, the construction continues and the executable file in the * previous * Destination directory instead of the update.

  Example:

  Destination dir = c:\temp\version1 --> choose to build the executable--> VI pre-build runs and sets of Destination Dir to c:\temp\version2 --> Build over and said 'You can locate the building to C:\temp\version1'--> check the build properties, destination dir is C:\temp\version2 --> build again--> pre-build runs and destination updates to version 3 --> Build finishes and says 'you can locate the building to C:\temp\version2'--> generation of recording properties destination dir is C:\temp\version3

  And so on and so forth. As you can see, the setting of the tag works (as evidenced by the properties build updated). However, it seems that the destination directory for the generation that is determined and set * before * the prior generation VI is managed. In my opinion, this is not expected behavior.

  Here is an excerpt of a watered-down version of the code, which still has the issue. I've also attached the full VI, saved to LV2010.

  

  The attached VI will enter the version number of the build, add to the title bar of the start vi, update the destinations to build a new path that has the version number, and then save the project.

  As a final note, I would prefer not to use a post-build VI to rename the directory in the build.

  It is not recommended to use this approach to change the settings of the Application Builder. While the code of the app Builder uses the values in the tags, it potentially treats information and so simple updating of the values may not the desired effect.

  The steps in pre/Post build that we intended to allow users to run code before and after their own processing code or perform actions not conducted by Application Builder (i.e. control source files before generating or move files to a destination of export). Any attempt to change the configuration settings after the construction began, once again, is not recommended and (as you have seen) may cause unexpected behavior.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• mobile device have always the same message... a problem cause the program blocking

  Original title: service mobile device

  I still got the same message... a problem cause the program blocking

  Hi MarioGrenier,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  I suggest you to check and clean the boot if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Let us know if you need more assistance.

• Recovery system causing problems with the size of the screen.

  Due to some problems I had, I finally had to yield and perform a system recovery back to the manufacturer's specifications.  Once this is done, I downloaded all the updates to Vista, all the drivers, etc..  Everything is square and works fine now, with a big problem.  I bought a monitor 20 "a few months ago.  It worked fine before the recovery is done.  Since the resumption, the display is smaller, as if I still had the old monitor 15 '' on the system.  I did that the driver for the monitor is correct and up-to-date.  I found a way to enlarge the display of the size of the screen in an online search, but it does not clear up the problem.  For example... If I go to a site like the Pogo, the bottom of the site is almost normal size for the monitor, but the game pop up displays the size of the screen 15 ''.  I tried everything I know and can't get this last problem fixed.  Any suggestions would be greatly appreciated.  I also checked the resolution and makes sure it's OK for this monitor.  Thanks for your help.

  Do you have the driver from Microsoft or directly from the manufacturer?  If Microsoft, go to the manufacturer website and download THE latest drivers applicable on your screen and the version of Vista (Microsoft sometimes cause problems).  Does the monitor require any firmware - if so, download and install that too much of the manufacturer's web site.  You can also update the video card drivers and firmware just in case it is the underlying cause of the problem - again go to the web site of the manufacturer to get the files rather than using those available through Microsoft.

  Go to start / Control Panel / customization / display settings / and make sure that your monitor is displayed in the drop-down list.  If this is not the case, click on the box and see if you can find your monitor and then select and make the box extend the desktop to this monitor is selected.  Go into the advanced settings, click list all Modes and try one at the top, if it is not already selected (assuming that it is appropriate for your monitor).  If this does not help, try others that are compatible with your monitor to see if you can find one that allows you to achieve your goals.  It may not work, but it's probably worth a try.

  Other than that, I don't know what to think.  You already seem to have covered most if not all of the bases.  If the above does not work, maybe someone else review this thread will have other ideas to offer.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.