[Custom Component]: how the live preview

Similar Questions

• The live preview bug

  Since upgrading to the latest aftermath Overview Live does not work well. I constantly have to purge the memory to see the changes I made (scale, Position, etc.).

  Even when I cancel the live preview will not refresh until I have served.

  Anyone know a fix for this?

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• Unable to see the live preview generator

  Hi experts,
  I use oracle repoert 6i.when I am under some perticular
  I am unable to see the live preview of the report generator. Once compiled and giving data
  in the front, is to show that the live outout directly. It is without going through the
  stage of the data display in the live preview generator.
  
  But some4 of my reports are running fine, which shows live preview generator
  running in direct mode.
  
  You please tell me. How can I see the the direct viewer of each report.
  
  Concerning
  Rajat

  I think so.. Live Preview generator exists for bitmap reports.

  Reports of character mode will run in the runtime only viewer...

  Make sure the system MODE parameter is the CHARACTER of these reports which do not come within the live preview Builder

• I can't understand why the latter splits the live preview... but not in the browser?

  I finally got my site to the top and everything runs great... except that I can't understand why this page behaves as if it was too broad.

  http://www.johnnez.com/mainbooks.html

  He is defeated in the live preview... but not in the browser preview.

  Thanks for the tips...

  Jn

  Well, I was looking at your code for a longer period that is now in good health and the only thing I can think is to ask if you want to have two container div with a class of content?

  I don't know if it's the anser but you can try to delete one of these and then find an of the

  Tags to balance that up.

  Try just to comment on the following:

  Then put in the comment end tag and see if that helps.

  Just a thought

  Martin

• Custom component AS3 / the event for MXML Tag definition

  
  Custom component AS3 / the event for MXML Tag definition
  Expose a custom in the custom MXML tag event.
  
  
  I made a custom AS3 component named "CustomListComponent".
  Is a list type component which extends UIComponent.
  
  When an element is selected (selected) I generate a custom event named, 'selChange '.
  
  I want the user to be able to use this tag, set a handler on the MXML tag.
  I tried to use metadata as [vent ("selChange")] in the file of AS3 components with no luck.
  
  Any help / examples to expose a custom event from a custom component AS3 for the MXML tag for the developer/end user would help considerably.
  
  Anyone? Thank you.
  

  To send the event in an AS3 component, try the following. The click event is simply to show you the idea. The event generated by the interaction of the user (or programming) could be anything.

  TS

• Why the live preview is not displayed CSS code?

  Hello

  Preview live is supposed to show you what your website will look like. This is how it is supposed to work. How is it that when I add the CSS code in my html file, it does not add the design of live preview? Should I tweet a framework. For your information, I use the Dreamweaver application more up-to-date, running on a Macbook Pro retina run 13 inches at the beginning 2015 release the last OS X El Capitan. Any comments will be nice, I was very interested in the preview live and bought Adobe Creative cloud because of this feature.

  Thank you.

  DW favours incorporated only if they come after your external style sheet links.

  If still not appear embedded styles, check your code errors.  Also make sure that the CSS classes and ID is added to your HTML markup.

  NOTE:

  • Design mode is not capable of reproducing some advanced CSS.
  • Live View is better, but not perfect for all styles of rendering.
  • Overview in real browsers, it is still the best way to check your work.

  Nancy O.

• Why the fonts display in blue, although it is red in the live preview and all the CSS rules?

  I tried for hours to understand WHY the fonts for certain lines will not obey every command that I gave them in Dreamweaver.

  http://www.johnnez.com/jonzmainbooks.html

  The titles of these books are supposed to be red.  They show red in every single place that I can find them in Dreamweaver.  They saw in the Red mode live view.  But they appear in blue in the browser.

  WHY is this?  Is it a case of some CSS too being ruled by a lower rule?

  The tiles in blue which should be red are the twelve days of Christmas in Washington, the clock dance and Sky-Cycle of Cromwell Dixon, etc..

  Thanks for the clues...

  Jn

  The CSS files are 404 not found on the server.

  Path points here:

  .. /.. /Jonz2012site/CSS/JonzheaderindexCSS.CSS

  You might want to try this:

  CSS/JonzheaderindexCSS.css

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

  http://ALT-Web.blogspot.com/

• Fonts not embedded Typekit projection in the live preview?

  No edge Web fonts, but Typekit is still supported?

  I just tested and it worked fine for me. Edge code that is used for the URL:

  http://127.0.0.1:57760 / test.html

  In settings of Kit, I have these domains:

  127.0.0.1 localhost

• FMS is clear how the live stream?

  This data flow can not be deleted

  Hello

  To clear the stream, just unload the application in the administration console.

  

• Custom component gR 10, 3 of the Complutense University of MADRID

  We have an obligation to build a custom, component in order to change enamel teample for 'Notice of expiry'. From now on, we have a component inside the 'custom' folder called "CS10gR35CoreUpdate" that has the file "query_notification_mail.htm" inside the folder teamplate and many other model. Now I will create a new custom component of the based on the existing "CS10gR35CoreUpdate" and edit the required file 'query_notification_mail.htm' and will allow this component of the Components Wizard and restarts the UCM.
  
  My Question is: how I'll make sure that new custom component is called when an email is sent for documents to be expired? What abt the existing one?
  
  Please help me as soon as possible, because I provide the soultion. Thank you!!

  Our custom component is not any file of defination resouce, and I do not see the loadorder in defination of resource. Where can I configure the order of loading on the custom component?

  Yes, that's what I meant (in the .hda folder).

  I have another Q? Is it safe to manually change model "query_notification_mail.htm" who that is on the inside:
  Install dir\custom\CS10gR35CoreUpdate\core\templates\query_notification_mail.htm, I ask this question because I have to make changes only in query_notification_mail.htm, so instead of creating the new component based on exit, if I change the file manually?

  What do you mean by "safe"? Of course, if change you it on a hard drive, it will work (ie. in this particular system, the change will apply). You should be careful when you implementCS10gRXCoreUpdate in the future (a global patch will replace most likely your changes). In general, the change of standard resources is not considered to be a very good practice (quick and dirty), but if it is a change in one system, you can probably live with that.

• Live Preview is open on the tab of Google Chrome, but Chrome is missing from their user profile.

  Hello

  So, to cut a long story short. I have Google Chrome Google Chrome & m32 Canary installed on my desktop.

  I tried to test "Live Preview" and found that when you click on the 'light' bolt I would be presented with a new window of Google Chrome Canary, and its associated profile (extensions and everything) would be absent.
  Preview live would work for a few seconds, until what I was greeted with this error message:

  

  I thought it was obviously a problem with edge Code CC opens the wrong browser as my default browser is Google Chrome (stable M32); not to mention the Canary Islands can only be activated in the default browser.

  So, besides persual I found this convenient link on the github media: https://github.com/Adobe/brackets/wiki/troubleshooting#wiki-check-Windows-registry

  Check the registry to see what settings have been applied, I found that the Canaries (SxS) has been defined as the default chrome.exe launcher?

  

  As well, this is obviously not "normal." and if it is a bug on the behalf of the chrome team, I have no idea, but I changed the default paths to Google Chrome Stable (M32)

  

  Back on Board Code CC, I went and attempted to open the default get startred with the live preview html file. It works as expected and I don't get the error previous edge Code CC threw on the impossibility to load the development page - except that it opens a tab of Google Chrome Stable (M32) skeleton, which is missing from its partner (singular only) user profile. The other matter outside the missing user profile; is that I get now that Google Chrome Stable (M32) error:

  

  Help with this bug would be greatly appreciated.

  Media uses a custom at the launch of Chrome profile so that it is not inconsistent with all the other things that you can run in Chrome.

  The bad news is that you will need to install all the extensions you want to use with the media in the new custom profile. The good news is that it is all being cached, but only do it once.

  To find the cache for this profile, use help > show the Extensions folder and then go up 1 level to the media folder. Custom profile data is stored in the live dev-profile folder.

  Hope this helps,

  Randy

• Two screens - editor and live preview

  Hey guys, I'm still a rookie when using Dreamweaver, I can code, but cannot use the comprehensive software to its potential.

  In any case, I have 2 computer screens that I can use. I want to display the Editor screen on one and the Live Preview on the other - so I'm not flipping between them all the time and can see my code work correctly. I need for a ticket Web site, I am paid for - http://www.prime-ticket.com.

  Someone at - it did before, or knows how please?

  You can do ' some kind of ' DW, but only with the Source Code on one screen and Design/Live View on the other. To do this, open your Code inspector window by clicking window > Inspector Code or F10. Move the Code Inspector on your second monitor and coming out of your Live/Design view with the frame of the application on the other screen.

  You "can" also drag an image 'maximized not' application to cover both screens, allowing you to put your windows where you want, but causes so many other problems, it's simply not worth it.

  I agree with Nancy, use creating an idea for the feature request of "true double/multiple monitor support (like Photoshop)" and you will get a nice chunk of votes on this issue. It's something that DW is necessary since it was created in my opinion.

• Edge Code Live Preview does not connect

  Hello

  I am running overview dashboard (and media Sprint 20) on an iMac and a macbook pro. On the iMac the live preview works fine, but on the macBook is not.

  If I turn on the Live Preview on the macBook, nothing seems to happen other half of lightning turns yellow. Chrome does not launch, but after about 5 min, if Chrome is already running it will load the page but it is still not connected, no other changes are shown unless I refresh the browser. The bolt remains half yellow and connects never completely.

  Twice he has connected and worked correctly, but I can't see any sort of pattern so that it can work constantly. I reinstalled UN / all programs involved but same thing... exactly the same thing with brackets Sprint happens as well...

  As I said, it works perfectly every time on the iMac, and they run every two OS x 10.6.8.

  Any ideas?

  Hi Keita,

  Do you think you could try turning remote on debugging manually and see if it works? There are instructions here (replace chrome with Google Chrome) - http://www.chromium.org/developers/how-tos/run-chromium-with-flags

  This isn't a permanent solution, but it will help to track down if right holders cannot find Google Chrome in the right place or if it is unable to connect to the debugger.

  = Ryan

  [email protected]

• More Live Preview? s

  So, I can get the live preview to work in Chrome 34. Mac OX 10.9.

  However, I get an error window latent who appears and indicates the live preview may not load. However, the live preview works always. Does anyone know if there is that something simply not properly configured?

  Awesome man. Glad to know that it was a known problem. Enjoy the heads!

• 11g Custom Component with SQL IN (val1, val2,..., valN) query

  Hello
  
  I want to use a query with a parameter of varchar entry into a custom component. The query definition is like this:
  
  < b >
  QWhereIsAdministrator < td > < table >
  < td > SELECT DISTINCT * FROM FWMTSITE WHERE ADMINISTRATOR IN (?) < table >
  varchar < td > UserRoleList < table >
  < /tr >
  
  I can't pass the value correct settings at the request of IdocScript
  I tried the following:
  
  < $UserRoleList = $ "" valA1","valA2"" >
  < $executeService ("SITES_WHERE_IS_ADMINISTRATOR") $ >
  
  < $UserRoleList = "\'valB1\',\'valB2\'"$ > ".
  < $executeService ("SITES_WHERE_IS_ADMINISTRATOR") $ >
  
  < $UserRoleList = $ js ("' valC1', 'valC2'") >
  < $executeService ("SITES_WHERE_IS_ADMINISTRATOR") $ >
  
  < $UserRoleList = $ xml ("' valD1', 'valD2'") >
  < $executeService ("SITES_WHERE_IS_ADMINISTRATOR") $ >
  
  < $UserRoleList = $ url ("' valE1', 'valE2'") >
  < $executeService ("SITES_WHERE_IS_ADMINISTRATOR") $ >
  
  < $UserRoleList = $ urlEscape7Bit ("' valF1', 'valF2'") >
  < $executeService ("SITES_WHERE_IS_ADMINISTRATOR") $ >
  
  No result found, the syntax of the request for enforcement is not correct. Here is the REQUEST trace output:
  
  SELECT DISTINCT * FROM FWMTSITE WHERE ADMINISTRATOR IN ("'valA1","valA2" ') [executed. [Return line (s): false]
  SELECT DISTINCT * FROM FWMTSITE WHERE ADMINISTRATOR IN ("'valB1","valB2" ') [executed. [Return line (s): false]
  SELECT DISTINCT * FROM FWMTSITE WHERE ADMINISTRATOR IN ('-"valC1\"-"valC2\" ') [executed. [Return line (s): false]
  SELECT DISTINCT * FROM FWMTSITE WHERE ADMINISTRATOR IN (' & #002339; valD1 & #002339; & #002339; valD2 & #002339;) ") [Executed." [Return line (s): false]
  SELECT DISTINCT * FROM FWMTSITE WHERE the ADMINISTRATOR IN ('% 27valE1% 27 %2 c % 27valE2% 27') [executed. [Return line (s): false]
  SELECT DISTINCT * FROM FWMTSITE WHERE the ADMINISTRATOR IN ('% 27valF1% 27% 27valF2% 27') [executed. [Return line (s): false]
  
  
  
  
  Thank you for your help.

  Change the type parameter of varchar to varchar.in in your definition of the query. Like this:

  
  QWhereIsAdministrator
  SELECT DISTINCT * FROM FWMTSITE WHERE ADMINISTRATOR IN ( ? )
  UserRoleList varchar.in
  
  

  In your workbook, put a list separated by commas in param UserRoleList. In java, you can use:

  final List someListOfStrings = ...; // your list of strings
  final String yourUserRoleListParam = StringUtils.createStringSimple( someListOfStrings );
  m_binder.putLocal( "UserRoleList", yourUserRoleListParam );
  

  In your case

  <$UserRoleList = "val1,val2,...,valN"$>
  

  should do the job.

  Kind regards
  Fabian

  Published by: fscherpe on March 24, 2011 07:45 (added iDoc variable saw you want to begin the application of the model, not Java)