Custom logic for the return value of LOV

Similar Questions

• Use the return value to do step digital multiple success or failure

  Hello

  I use a multiple digital step to check several measurements by an external DMM through a function created in CVI.  I would like to use the return value of the function to replace the global status of the step. The reason is that the return value indicates a communication error, while steps are being taken, and which would lead to a "fake" fake or false 'Pass '.

  What I would do is more or less this >

  If the return value is 0, then check if the measuremets are between the limits

  If return value! 0 = there was a communication error so step continues to operate independently of the measure.

  I tried combining multiple digital step with a step of pass/fail, but it does not work.

  I also trie to change the expression of the status of the multiple digital steps but basically ignores him.

  Any ideas?

  Thank you

  Javier

  Why don't you just make that return the value limits for multiple numerical limit stage.  Comparison of the EQ value and the low limit to 0.

  That would make the most sense.

• Executed as user: domain\username. The return value is unknown. The process exit code was 128. The step failed.

  I have a job with 20 steps. This error occurs for any stage of perticular. It produces randomally at any stage.

  "The return value is unknown.  The process exit code was 128.  The step failed. »

  This is not the right forum for SQL database issues.

  Please repost your question in the MSDN SQL forum
  http://social.msdn.Microsoft.com/forums/en-us/sqldatabaseengine/threads

  Sincerely,

  Marilyn

• Possibility to get a popup to display the display value "" and not the "return value".

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  Concerning

  Ben

  Benton says:

  Version - Application Express 3.2.1.00.11

  I have a list of values that exceed 1500 files and am so impossible to use a Select list.

  When you use a popup lov after choosing the recording, apex displays the return value (in my case a number). Is it possible to let him use the display value (in my case, a text string).

  See limiting the number of values in a LOV

  If it comes to a page element, and then change the type of Popup LOV key.

  If there is a control in a table, it's another reason to upgrade to a supported version, or the tabular form will need to be converted to be manually generated and processed in order to allow the appropriate control be returned using the apex_item.popupkey_from_lov method

• get the return value of a method of the application module in the workflow

  Hello

  I use jdeveloper 11.1.1.7.0

  I defined a method (return type is useful java card) in the Module of the Application and add this method to the client interface.

  also I have a workflow and in this TF firstly I should execute this method and put the return value for the pageFlowScope parameter. I know that to use this method as a methodCall and set it as an activity by default, but I don't know how to get the return value before entering the jsff page and set the pageFlowScope parameter.

  Habib

  Concerning

  When you add the activity to the way to deal, there are 'Return value' property that you can set to #{pageFlowScope.yourVariable}

  Dario

• How to set the return value of the method to the /outputText inputText field

  Hello

  How to set output return value method of a /outputText adf inputText field

  Concerning

  sevanan

  Well put method's return value to a managed bean variable.

  Create a variable in the bean and set the return value to this variable.

  the inputText and outputTextValue to this managedBean.variable value

  That's all...

  and add partial trigger for inputText programmaticly

• [JS CS4/CS5/CS5.5] How to get the return value from Javascript using doScript

  Hi all

  I'm calling javascript from COM (c#) and it works fine. Passing parameters to javascript and playback by using the syntax of the [x] arguments also works very well.

  What I can't seem to get to work is to know how to move something from javascript to the calling COM Summoner, in this case, c#. How and where should I place the return value in javascript?

  Thanks in advance.

  Rachiud

  doScript() evaluates an expression, so just make sure that your Javascript is an expression.

  For instance "(3 + 3)" 6 "

• the return value of tpacall(), tpcall and tpgetrply()

  The return value of tpacall() weather, tpcall and tpgetrply() has a rule? I found that the return value of them is an integer that has increased by one. What is its maximum value? Or it will be a loop in a scope? Thx for your answer!

  Bill,

  A return of tpacall(), tpcall() or tpgetrply() of-1 indicates failure. Any other return value indicates success.

  Unless the TPNOREPLY indicator is used, the value returned by tpacall() is a handle that can then be passed to tpgetrply(). (The alternative is to call tpgetrply() with the TPGETANY flag, in which case the handle returned by tpacall() will be necessary.) When using the indicator TPNOREPLY tpacall(), tpacall() returns 0 success. In both cases, the only error return value of tpacall() is - 1.

  The return value on the success of tpgetrply() is not documented (except that it is not - 1), but it seems to be the descriptor of appeal on which a message was received, which is the same information that you can place in * cd.

  The return value on the success of tpcall() is not documented (except that it is not - 1), but currently, the value 0 is generally returned on success.

  Kind regards

  Ed

• Read the table for the next value (sequence issue)

  Is there a function in line with my_seq_no.nextval that can read a value from the previous field and get the next number in the sequence? I know how to create a sequence, but I thought that there is something as a function of getnextval.
  
  Thank you.

  Preston,

  The problem is that there is no such thing as a previous value in Oracle.
  You must specify a way (like number maximum.. etc..) to get the expected value.

  Sometimes, you can see the code as...

  insert into emp values
  (select max(empid) + 1 from emp) new_emp_id,
  ''XYZ' ename,
  .......
  ....
  ...
  from dual;
  

  As seen... the code above takes the maximum value of the emp table and gives you the identificateursuivant emp.

  The problem here is that all currently connected users will get the same value for the new empid, until a person inserts a record, then... all others would be unique constraint errors (if you have constraints on the right in place).

  Using sequences is the right way to ensure that all concurrent users get their own unique values for the new values.

  As for the getnextval, they could always get to a function which selects to the max (column-name) + 1 and returns it... but it has the same problems as the insert... Select above... So I would rather not provide code for such a thing... I would do more damage than help it. Please use a sequence for your case.

• Impossible to retrieve the return value of function from pl/sql using the DB adapter

  Dear Experts,
  
  I use the DB adapter in my BPEL process. Using the DB adapter I invoke a PL / SQL function. I am able to send two input parameters for the pl/sql function. But I do not know how to retrieve the return value of the function. Please suggest me.
  
  Thank you
  Rajesh

  Can you tell how pl/sql function looks like you? you return the value of the function, right?

• Problem in designing a custom field for the display of paragraph

  Hello

  I need to develop a custom field that is supposed to act as a RichTextField with the additional of the hyperlink feature as seen in the web pages. I have a few paragraphs of text with an id associated with each of them. A paragraph may have link to another paragraph. I think that the hyperlink is actually like a button.

  My screen will consist of a single paragraph. If any hyperlink (id) in this paragraph is preesed then the screen reloads with another paragraph (id in a hurry).

  My problem is to develop a custom field for the display of this paragraph.

  Point: several lines of text without interruption. Some of the text may be bold, italic. a text can be the hyperlink.

  Now I'm stuck. I have no ideas how I can start with. Can someone give me please suggestions as to how I can start with?

  Thanks in advance

  Bika

  I have a different Suggestion.

  If you are using an ActiveRichTextField, you get two things:

  (1) the ability to shape a field using different fonts:

  Comment - formatting text in a RichTextField
  Article number: DB-00124
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800345/...

  (2) the ability to create "links" automatically using string models

  How to-to comparison models in the BlackBerry smartphone to provide a user experience integrated applications
  Article number: DB-00525
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...

  Using models of string, I think you'd be able to create ' hot-link in your text, which the run Menu item was able to process you want.

  Just an idea.  Hope this works for you.

• If the default value of LOV

  Hi all

  Thanks to bean.setText ("test"), we set the default value of lov, when we select the LOV value, target value does not displaying not yet show by default.

  Help, please.

  Thank you

  Close this message.

  Do not open in double nets. I replied to your other thread: default value of LOV in OSTEOARTHRITIS

  See you soon

  AJ

• How to get the return value of the activity of the method in the stubborn workflow

  Hi all
  
  I use Jdeveloper 11 g R2 (11.1.2.3) & Weblogic 10.3.5.0
  
  I have a stubborn workflow, default activity is a call method than calling a method in the app module
  This method returns an id
  
  I need this code in my project to do something else
  Is there a way I can access the return value of the method call activity?
  
  Concerning
  Mohsen

  Set the value of return as #{{pageFlowScope.myBean.returnValue} pageFlowScope.myBean.returnValue} in the method, call the property inspector and get the value in your managed bean.

  String returnParam = (String) JSFUtil.getFromPageFlow ("returnValue");

• The class I'm teaching starts Monday and I can't wait for the return of my serial number snail mail. M

  The class I'm teaching starts Monday and I can't wait for the return of my serial number snail mail. My product code is < removed by mod, kglad >. What help can you give me?

  Contact adobe support, http://helpx.adobe.com/contact.html?product=flash&topic=using-my-product-or-service

• How to get the return value from Java runtime.getRuntime.exec?

  I am running shell from a (GR 11, 2) Oracle database commands on aix.
  But, I would get a return value of a shell comand... as you get with "echo $?"
  
  I use a code like
  

  CREATE OR REPLACE JAVA SOURCE NAMED common."Host" AS
  import java.io.*;
  public class Host {
    public static int executeCommand(String command) {
      int retval=0;
      try {
          String[] finalCommand;
          finalCommand = new String[3];
          finalCommand[0] = "/bin/sh";
          finalCommand[1] = "-c";
          finalCommand[2] = command;
  
        final Process pr = Runtime.getRuntime().exec(finalCommand);
        pr.waitFor();
  }
     catch (Exception ex) {
        System.out.println(ex.getLocalizedMessage());
        retval=-1;
      }
      return retval;
  };
  /

  but I do not get a return value... because I don't know how to get the return value...
  
  Published by: user9158455 on 22-Sep-2010 07:33

  Hello

  Your pr.exitValue () has tried?

  I think you also need a finally block that destroys the sub-process

  Concerning
  Peter