Delete the order type

Similar Questions

• can I change the order type

  Hi all
  
  When I create an order for a customer I wrong order type given and reserved... and every thing shipping gift. now stopped in closed state...
  Now if I want to change the type of order is it possible (for the same customer)?

  N °, even for internal orders, you can not change.

• Delete the path type "effect on a path.

  Hello

  I have a baseball cap design, and I applied type over text on path "effect."

  but now I want to remove the type on the effect of the track and the way back to its original state.

  Describing the text removes the path and I don't have a copy free to return (my mistake )

  How is - a removes the type on a path path effect?

  --

  See you soon

  GPGW,

  If I (put) understand it, you can, starting with all deselected, commented on are your friends:

  (1) with the selection tool direct Alt/OptionClick the path away from the guy (Smart Guides say path or anchor), then Ctrl / Cmd + C + F, then apply Stroke of origin in the tools/thought the Contour pallet box;

  2) click the Type and press DELETE.

  That should give you the original path with a vascular accident brain (so you can see) and without the Type.

• What controls the order of the types in the list of paette type

  TS2012

  I have a bunch of custom in my file of sequence types, and when I go to the range of types and look at the types associated with my file in sequence, they are in the 'disorder' which is not very useful for me - I would have preferred that they are in a specific order which groups them according to the category of tasks they do.   Basically, I want to be able to manaully specify the order of the types.  Worse still, as I modify some types, their order and after the editing changes they get inserted somewhere else in the middle of the list (not very useful).

  The sequence that the user interface of the editor does not provide a way to 'Capture' a type and drag around manually update the order, or be able to sort the headers of columns for the type palette.  (Heck - which would be too convenient here).

  So... try to reverse this engineer and get there myself.

  There seems to be 2 different pieces of possible orders of the information for the types that I can find.

  (1) order that they exist in the file in sequence if I save it in XML format and begin reading from the top down.

  (2) the specific type typelistordernum

  I have a case where, if I open the pallet type in the sequence editor, I see

  TypeA

  TypeB

  TypeC

  Typed

  TypeE

  If I open the file in the sequence in the text editor, I see

  Typed (typelistordernum 49)

  TypeE (typelistordernum 50)

  TypeC (typelistordernum 51)

  TypeB (typelistordernum 52)

  TypeA (typelistordernum 29)

  The order in the movie file, or the order number of type list seems to dictate the order that they appear in the range of types of the sequence editor.

  I checked that each type in the example are ONLY used in this file a sequence - not shared in any other type of sequence pallets or files of type.

  If I write code to load the sequence file, obtain a reference to it, it cast to a propertyObjectFile and retrieve the TypeUsageList for this file, I get an ordered list that corresponds to the order of typelistordernum.  I can call the MoveType against this TypeUsageList method to reorder the items in the list type and save the file in the sequence.  The next time I open the file in the sequence, the tool retrieves the TypeUsageList for the file of the sequence in question and the order and numbers are the same that I saved the last time, but the order types as seen from the range of types of Sequence Editor is no different (my sorting tool did not help to this point of view).

  All the suggestions here about what is happening, and how can I do feel how the order types is displayed in the palette of type sequence editor, and what I can do to get my types of "sort" I like.

  (1) Yes, you can reorganize the types according to the type via drag and drop. At least since the 2012 version of TS this works reliably.

  (2) the typelistordernum defines the order types are displayed in the view of types.

  (3) you can sort the columns in the view types.

  Maybe you accidentally sorted one of the columns in the view of types and the sequence editor is forgetting that for what you see is actually the order sorted, based on one of the columns.

  I'm sure that drag - move is disabled when you have a sort column so this explains very well what you see. Check your headers to sort for this point of view and make sure that you do not have up and down arrows.

  Hope this helps,

  -Doug

• IStore order type

  Hello
  
  Any confirm where the order type is chosen to iStore? to set up or ASO customer: profile of order type at the level of default responsibility?
  
  This type of order is a required attribute of the OM for the import of the order.
  
  Thank you.

  If you are on 11.5.10 then he come from a type of order ASO:Default assuming that there is no custom code in the pre / post of the hooks on the quote.

  Kind regards
  VKKY

• FILE cannot BE DELETED, the file size of the file type 'file' "0 bytes"

  I downloaded a music file of myfreemp3.eu, he wasn't .mp3.  He was able to play a couple of times, but now does not open.  Now, I can't move or delete it from the downloads folder, system do not see.  its properties are of TYPE 'file' and SIZE '0 bytes. "  Error message is "unable to find this article. It is no longer in xxx, etc.

  I tried many suggestions to remove it without success.

  I have Vista 2007 service pack 2.  I tried in safe mode, tried to move to another folder, tried to run without windows, search, folder to never display thumbnails, tried Mandrake Move, but it was outdated, orders back cmd has tried to delete. Also tried to delete with disabled explorer.exe.

  Any suggestions?

  http://answers.Microsoft.com/en-us/protect/Forum/protect_other-protect_scanning/file-cannot-be-deleted-file-type-file-file-size-0/60d88d01-CD74-4f47-976e-f5d2cb3dc7a1 >

  Thank you Ganesh and Hetti.  I just finally deleted my ghost file.  I used the safe mode and cmd.

  I went into the directory of downloads in the BACK, the used command DIR / X to find out the name of the file.

  He was ~ 1 at the end of the file name.   I used DEL filename ~ 1 and the file disappeared.  I checked the

  trash and he wasn't there either.  I rebooted the computer and found no trace of the file.

  The controls were as follows,

  CD C:\users\my name\downloads

  dir / x (to find the full file name,)

  del (to remove the file)

  I could probably use alternative command

  del *. *.

  Thank you again and maybe it helps someone else.  I ran the control with the repair disc, but that did not remove the ghost file.  I could also not delete the downloads folder.  Create the same named file with 0 bytes not working anymore.  I tried the latest version of Mandrake then.

• What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were delete

  What is the order of the removal of the songs to an iPod Classic syncing > somehow my laptop has started the process of synchronization without my knowledge and removed approximately 2,000 songs of my iPod classic.  How can I identify which were deleted songs?  I always manually move files to prevent this.  I'm on Windows 10.

  Has no way to know that...

  If your library iTunes music fits on the storage space of 160 GB of your iPod classic, you just set to automatically sync your entire library of music.  Then, it won't matter which has been removed and which do not get deleted, because your iPod music library is the same as your library iTunes music.  And iTunes it keeps this way, every time your iPod connection (or click sync , if already connected).

  If you don't want "everything" in your iTunes library on your iPod (understandable), you can create a playlist in your iTunes library with all the songs you want on the iPod.  Then, set to automatically synchronize the playlist to iPod.  Instead of manually managing iPod, you manually manage playlist in your iTunes library.  The iPod has no need to be connected.  The next time you connect the iPod (or click sync , if already connected), iTunes will update the iPod with the same changes.  The big advantage is, if something happens like what you describe, or needs to restore iPod (erased) or even if break you your iPod (and get a new), need you a few mouse clicks to solve the problem.  Just set it up to sync the same playlist once again, which exists in your library iTunes (not only on the iPod).

  You can post back for more information about how to use automatic synchronization to do what you want more easily, go ahead.

• Deleting the definition of Type casuses control a lot of misreferences and program in the block diagram errors

  In LabVIEW 2010, I have a Def Type control i.e. a Cluster with several other controls within the Cluster. Apparently, the references to the controls in the block diagram are based on the order that the controls have been added to the Type definition command. The side effect of this is that if a control is removed from the command of Type definition, many of the done Variable reference in the block diagram or now either broken, or worse still, refer to wrong control in the Type definition. These problems are quite difficult to find and fix.

  Comment: If you create a control of Type definition and make a Cluster. Now add any controls to the Cluster in an order, let's say A, B, C, D. Their types does not matter. Now use the Type definition in one or more controls on the front panel. In the block mark references to controls inside the Type Def would control on FP. Now return to the Type definition and remove the command B of the definition of Type. Now, lots of errors appear. Broken links. But worse still, you see old references to B that now refer to C and old references to C are now referring to the old references to D and D are removed altogether, etc..  This side effect is much more errors, broken links and misreferences than expected otherwise.

  How add and remove controls anywhere in a Cluster in a Type definition, at will, without creating a whole bunch of errors in program, broken links and misreferences for controls in the Type definition that have not changed?

  
  

• Delete all orders of the user at the same time?

  Hello

  There is nothing in the code to delete all orders of the user at the same time? (by code or function)

  Get all enable them command user?

  Thank you

  Hello Oz,

  Call ScriptCmdReset()

  to return to the State of brand new tiara, which, in most cases, unload all global variables and commands that you have created by program since then.

  Brad Turpin

  Tiara Prodcut Support Engineer

  National Instruments

• When I type text in my mobile e-mail, word, Excel etc the cursor goes up or down or in the middle of the text and delete the texts.

  When I type text in my mobile e-mail, word, Excel etc the cursor goes up or down or in the middle of the text and delete the texts. some time remove all the texts. I'm fed up with it. How to solve it? Can someone help me?

  I use vipre antivirus software. But after deep analysis it shows no any malware or spy ware seen.

  Help, please...

  Original title: malware or Trojan horse?

  Cover the touchpad with a piece of cardboard, the next time you use * as you type something long *...

  What do have?

• Define a map or ORDER method for the object type

  Hi gurus

  I created an object and then its type and then I use this object and type based on line, see below:

  Create the object

  CREATE OR REPLACE

  TYPE test_object

  IS

  OBJECT

  (

  next_appearance_dt DATE, - next_appearance_dt

  youth_adult VARCHAR2 (5) - youth_adult

  ) ;

  
  /

  Create the object Type

  CREATE or REPLACE TYPE t_docket_object IS TABLE OF THE test_object;

  /

  Create function Pipeline

  FUNCTION to CREATE or REPLACE f_report (p_dt date, p_c_cd VARCHAR2)
  return t_test_object pipeline
  IS
  BEGIN
  FOR J IN)
  Select distinct test_object)
  next_appearance_dt,--862,
  'YOUTH '.
  ) AS test_object
  Jen.next_appearance base
  WHERE 1 = 1
  AND (base.next_appearance_dt = p_dt)
  AND (base.circuit_point_cd = p_c_cd)
  - and cse.information_id = 322
  -ORDER 15 - alias_name
  )

  loop
  PIPE ROW (J.test_object);
  END loop;
  END;

  /

  Run function

  SELECT * FROM TABLE (F_REPORT (TO_DATE('25-sep-2015','dd-mon-yyyy'),'1 '))

  Error

  ORA-22950: cannot ORDER objects without map or ORDER method

  ORA-06512: at "F_REPORT", line 5

  22950 00000 - "cannot ORDER objects without map or ORDER method.

  * Cause: an object type must have a defined for map or ORDER method

  all comparisons other than equality and inequality comparisons.

  * Action: Define a map or ORDER method for the object type

  I know the reason of this error and the reason is that I use the clause separate in my pipeline service, but do not know how to get rid of this error...

  Confuse you the type of table with the object type. He forge

  Select test_object (next_appearance_dt) test_object

  Not:

  Select t_test_object (next_appearance_dt) test_object

  Then:

  SQL > CREATE OR REPLACE
  FUNCTION f_report (DATE p_dt 2,
  3 P_C_CD VARCHAR2
  4                   )
  5 t_test_object of RETURN
  6 IN PIPELINE
  7 EAST
  BEGIN 8
  9 FOR (IN) v_rec
  10 WITH () DID
  11. SELECT TO_DATE('01-jan-2015','dd-mon-yyyy') NEXT_APPEARANCE_DT
  the double 12
  13                                  )
  14 select test_object (next_appearance_dt) test_object
  15                          from  t
  16                      ) LOOP
  PIPE 17 ROW (v_rec.test_object);
  18 END OF LOOP;
  END 19;
  20.

  The function is created.

  SY.

• I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  I need serious help please... We do translations of textbooks, I searched an excessive type function but have been unable to find, we are working in indesign CS 5. It takes allot of time to delete the text and type in the new language.

  Argh it's frustrating! I never noticed that the key was not working in InDesign.

  A bit of research and it turns out that the MS Office has this as an option in their software. But I can't find an option in the InDesign preferences to make it work.

  However, somethings do not appear in the shortcuts and preferences and are hidden triggers in InDesign that are accessible via a script.

  I'm not saying that it is possible to activate the button insert by using a script, but it is plausible that he can be activated.

  Maybe ask on the forum script? Scripting InDesign

  I know that this may be a possibility as with InDesign prior to export PDF documents interactive versions, there was previously no way to export PDFs interactive as unique pages if the gaps of.

  But the option to toggle this setting was scriptable.

• How to delete/remove the incidents of the same type

  Hello
  the Incident of our cloud Control Manager contains open incidents. In our case we have more than 150 of "archiver hung on the time line number /...» ».
  Now, I would like to delete those - given that I am aware of the underlying problem. But I understand that I can only mark an incident and delete an incident. Of course, it would be great if it would be possible to remove it at once. Is it possible to do?
  
  Any help would be apprciated.
  
  Rgds
  Jan

  Hello

  You can delete multiple incidents via the command line with the command 'emcli clear_stateless_alerts '.

  Clear alerts without state associated with the target object specified.

  Only the user can clear these alerts stateless; the Enterprise Manager Agent does not automatically clear these alerts.

  To find the metric internal name associated with an alert without a State, use the verb get_metrics_for_stateless_alerts.
  Note: Before running any command to emcli, you must connect to emcli first of all if it is not already done.
  It may also be necessary to synchronize the emcli and WHO.
  Example:
  $ emcli login - username = SYSMAN
  $ emcli sync

  Format (one line)

  $ emcli clear_stateless_alerts-older_than = number_in_days-target_type target_type-target_name = target_name = [-include_members]

  [- metric_internal_name = target_type_metric:metric_name:metric_column] [- unacknowledged_only] [- ignore_notifications] [- Overview]

  [] indicates that the parameter is optional.

  Options

  * older_than

  Specify the age of the alert in days. (Specify 0 for the alerts currently open stateless.)

  * target_type

  Type of target identifier internal, as host, oracle_database and emrep.

  For a list of the valid target types in your repository database, you can do the following:

  1. start sqlplus and log in as user sysman to your repository database

  2 run the following query:
  SQL > select distinct mgmt_targets target_type;

  The sample output:

  SQL > select distinct mgmt_targets target_type;

  TARGET_TYPE
  ----------------------------------------------------------------
  oracle_listener
  oracle_ias_farm
  weblogic_j2eeserver
  j2ee_application
  metadata_repository
  oracle_csa_collector
  host
  oracle_database
  oracle_emd
  oracle_emrep
  weblogic_domain

  * target_name

  Name of the target.

  * include_members

  There is place for composite targets review alerts belonging to members as well.

  * metric_internal_name

  Metric to be cleaned. Use the verb get_metrics_for_stateless_alerts to see our full list of parameters taken in charge for a given target type.

  ExampleFor the target type oracle_database
  $ emcli get_metrics_for_stateless_alerts-target_type = oracle_database

  * unacknowledged_only

  Only disable alerts if they are not recognized.

  * ignore_notifications

  Use this option if you do not want to send notifications for the cleared alerts. This can reduce the notification subsystem.

  * Overview

  Displays the number of alerts to be deleted on the target.

  Examples

  The following example clears the alerts generated in the database alert log more than a week old. In this example, no notifications are sent when alerts are disabled.
  $ emcli clear_stateless_alerts-older_than = 7 - target_type = oracle_database-tar get_name = database - metric_internal_name = oracle_database:alertLog:genericErrStack - ignore_notifications

  Example for a database cluster

  If the target type for the cluster database is "rac_database". run the following command
  $ ./oms/bin/emcli clear_stateless_alerts-older_than = 1 - target_type = rac_database-target_name = oracle.rac.ccc.kk

  Kind regards
  Vincent

• Remove the path type without deleting the path

  I accidentally created a path of kind of a way, I wanted to keep to a brush stroke. Whenever I select the type and delete the entire path is deleted. Or if I'm going to object > path > clean until... > empty text paths it tells me that there is nothing to clean up. I really wish to remove the path type if I can put a brush stroke on it instead of completely making the new path. It took me some time to create the path to the way I wanted it, so if there is a way to remove the type would be great. I searched on adobe site and Googling it and so far I have not found help. If anyone needs more information to help me understand that I will do my best to provide it.
  Thank you!

  If you were able to group - select just the path, make a copy and paste as I suggested.

  Keyboard shortcuts are Cmd + C (Mac) or Ctrl + C (Win) to copy. CMD + V / Ctrl + V for paste. (These are under the Edit menu.)

  This gives you a new copy of the original track with no remnants of the text. If you are satisfied, you remove the original path with text. Is not that what you want?

• Y at - it a State chart type or the flowchart describing the order of execution process model?

  One of my clients asked me this question...

  I have a problem with a change in the order of execution in TestStand 4.1.1.  [he has improved from 3.1 to 4.1.1]  It seems that ProcessModelPreStep runs earlier in 4.1.1 to 3.1.  This causes our model of error because some required variables have not been set when executing.  I wish that was a big flow chart or a diagram of the State for TestStand.  Maybe it is and I don't know where to look?

  The reminder that you describe is a reminder of engine and is independent of the process template.  There is a list of all actions and their order described in the TestStand reference manual in Chapter 3 of the section called "step Execution.  You will see the action 11 is a reminder of previous step motor.

  P. Allen

  NEITHER