Develop Module does not work. I have the membership, but it says that I don't have

I pay 9.99 per month and suddenly Adobe says that I can not use the develop Module. If they don't get the job, they will not be able to use my debit Module

Advertisement

Hello

Please see Module development does not work after last update 5.5

Hope that helps!

Kind regards

Sheena

Tags: Adobe

Similar Questions

  • My performance of the Lightroom Develop Module does not work correctly.

    My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

    I tried to follow some recommendations:

    1. leave a 160 Gig camera Raw Cache framework

    2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

    3. has created a new catalog that is less than a few LIVE in size

    Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

    ---------------  SYSTEM INFO ------------------------------------

    Version of Lightroom: CC 2015.3 [1052427]

    License: Creative Cloud

    Operating system: Windows 10

    Version: 10.0

    Application architecture: x 64

    System architecture: x 64

    Number of logical processors: 8

    Processor speed: 3.5 GHz

    Built-in memory: 32717,7 MB

    Real memory for Lightroom: 32717,7 MB

    Real memory used by Lightroom: 925,4 Mo (2.8%)

    Virtual memory used by Lightroom: 1086,4 MB

    Memory cache size: 0.0 MB

    Maximum thread count used by Camera Raw: 8

    Camera Raw SIMD optimization: SSE2, AVX, AVX2

    System DPI setting: 96 DPI

    Composition of the Bureau enabled: Yes

    Exhibition: 1) 1920 x 1200

    Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

    Graphic processor News:

    GeForce GTX PCIe/970/SSE2

    Check the supported OpenGL: past

    Provider: NVIDIA Corporation

    Version: 3.3.0 NVIDIA 359.00

    Rendering engine: GeForce GTX PCIe/970/SSE2

    LanguageVersion: 3,30 NVIDIA via the Cg compiler

    The application folder: C:\Program Files\Adobe\Adobe Lightroom

    Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

    Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

    Plugins installed:

    (1) home canon Plugin

    (2) Facebook

    (3) Flickr

    (4) HDR Efex Pro 2

    (5) attachment Plugin Leica

    (6) home Plugin Nikon

    (7) perfect B & & W 9

    (8) perfect effects 9

    (9) perfect improve 9

    (10) perfect photo Suite 9

    (11) perfect Portrait 9

    (12) resize perfect 9

    Config.LUA flags: None

    Map #1: Seller: 10de

    Feature: 13 c 2

    Subsystem: 29783842

    Revision: a1

    Video memory: 4008

    Map #2: Seller: 1414

    Device: 8 c

    Subsystem: 0

    Revision: 0

    Video memory: 0

    AudioDeviceIOBlockSize: 1024

    AudioDeviceName: Speakers (Realtek High Definition Audio)

    AudioDeviceNumberOfChannels: 2

    AudioDeviceSampleRate: 44100

    Build: not initialized

    Direct2DEnabled: false

    GPUDevice: not available

    OGLEnabled: true

    I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

    You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

    15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?

  • Lightroom Develop Module does not work?

    My OS is version 10.11.5, I use Lightroom 5.  My module work has continued to develop.  When I move the sliders, nothing happens.  I restarted my computer, reloaded the Lightroom software and development module still does not work.

    This problem just happened.  I tried to edit several photos and results are the same, nothing happens when I move the sliders.

    What should I do next?

    Try resetting the Lightroom preferences once: How to reset preferences in Lightroom?-the Lightroom Queen

  • I installed LR6 however the develop Module does not work.

    All aspects of LR6 work, however, when I try to open an image in the develop Module all I get is a blue screen with diagonal lines through it?

    adobe staff:

    It is a nuisance GPU. Update your GPU drivers from the manufacturers Web site.

    In the meantime, disabling "Use Graphics Processor" (Preferences > Performance), should help to load the module development.

    For more details, Adobe Photoshop Lightroom Help | Lightroom GPU FAQ

  • Develop Module does not work after the last 5.5 update.

    I uninstalled and installed from the direct link.

    Cleaned up and optimized the catalog, etc.

    Images are visible in the library or develop module, but if I try to start editing - no changes are visible, unless I go to the library and to develop.

    If I click on ' before/after' the empty screen.

    Help! It is a problem of important works for me!

    lightroom5.5.jpg

    We set!

    Called Adobe and after some poking around it turns out be a color profile for the monitor!

    If happy its back and its operation

    Now to restore catalogs...

  • develop module does not work

    I can't use the develop module. It says "renew your membership". I paid my membership (Adobe CC) for a whole year (since October 2, 2014).

    Hi DvdBogaard,

    Please refer to the article.

    http://helpx.Adobe.com/Lightroom/KB/unable-launch-Lightroom-55.html

    Thank you

  • I paid for an annual membership, but it says that I only have the tutorial

    I paid for an annual membership, but it says that I don't have the tutorial help me plaese

    Hello

    Please see the below help documents:

    Applications creative Cloud back in test mode after an update until 2015 for CC

    Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

    Kind regards

    Sheena

  • I have an Acer - processor AMD A10, 16gig ram desktop pc, I've upgraded to windows windows 10 8. When I open lightroom everything is ok in the library. When I select develop LR does not and I have to close it. If I delete a photo from the library of the h

    I have an Acer - processor AMD A10, 16gig ram desktop pc, I've upgraded to windows windows 10 8. When I open lightroom everything is ok in the library. When I select develop LR does not and I have to close it. If I delete a photo from the library of the same thing happens. How can I fix this., he can be to stop what is happening

    Hello Sarika

    Thanks for your help.

    It's not that simple I thought he'd be when I used your method that whenever I tried to uncheck 'Use graphics processor' Lightroom 6 crashed.

    At least you put me on the right track and I persevered and found the file relevant agprefs of Lightroom web help and followed the instructions to change manually.

    I have changed two files with the same name but stored in different locations.

    Everything works fine now.

    Thank you once again.

    Mick

  • I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

    I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

    If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

    It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

    You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

  • I have published my muse built Business Catalyst site and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

    I recently published my muse built the Business Catalyst site for preview and all from the 'Site in the web browser view' function in the program of the Muse does not work. Screen comes up with a message that it cannot locate the page and suggests I check the ip address.

    Hello Jimw93000314,

    Are you preview site in the edge browser? When you preview the page in the browser Muse create a local server to give you the preview in the browser. With the edge browser, there was a reported issue to access the local server.

    Please click the link below that shows the steps to enable the browser to edge.

    http://StackOverflow.com/questions/30334289/cant-open-localhost-in-Microsoft-edge-project-spartiate-dans-Windows-10-APER cu

    I'm sure this will help.

    Kind regards

    Vivek

  • In the United States, I can use selector locale quick to get U.S. locale of Russia but in Russia, it does not work to go the other way or any other premises than elsewhere. After selecting a new language and restarting firefox, it remains on the Russian

    In the United States, I can use selector locale quick to get us to the locale of Russia (ru - RU), but in Russia, it does not work to go the other way or any other premises than elsewhere. After you have selected the local new and restart firefox, it remains on the Russian locale. Y at - it a fix for this problem?

    This has happened

    Each time Firefox opened

    == Looks like it started with a newer version of firefox, but this may have been coicidental

    You have other language packs languages installed?
    Tools > Modules > languages

    There is no module language en-US, to achieve that you must install the version of Firefox en-US and install other languages in the version.
    http://releases.Mozilla.org/pub/mozilla.org/Firefox/releases/3.6.6/Win32/XPI/

    See also http://kb.mozillazine.org/Language_packs

  • Toshiba common modules does not work properly

    Whenever I connect to the laptop, I get a message: Tfncky: Toshiba common modules does not work properly.

    Anyone know what this means?
    I wonder if that has something to do with my windows media player does not properly. If I open the application, it is not to maximize the screen shows the taskbar
    Finally, it simply says "not responding" and I have to close the application. Tried to remove and reload that a new copy of WMP but it does not help.

    I don't know what laptop mode you but the first thing to do is to reinstall the Toshiba common modules.
    Please visit Toshiba support and download page under http://eu.computers.toshiba-europe.com go to the download section, choose your phone model and download common modules.

    Please let us know if everything works well again.

  • Tecra M7: Tablet does not work after closing the lid

    Someone had problems with the Tablet does not work after closing the lid on a Tecra M7? BIOS is 3.20

    Does not happen on hibernate or sleep.
    I have the set cover to do nothing on close.

    Hello

    What do you with Tablet does not work after closing the lid?
    Is - what the laptop freezes or what? What happens exactly?

    Closing the parameters adjustable lid to Hibernate or standby mode or no action.
    These settings can be defined in configuration power saver actions.

    If you have some problems with some Toshiba applications installed, I recommend you to reinstall the program and TOSHIBA common Modules that doesn t work properly!

    Best regards

  • My toshiba notebook webcam does not work; It shows the hearts.

    My toshiba notebook webcam does not work; It shows the hearts on the video screen

    Hi KurtKawohl,

    1. what operating system is installed on the computer?
    2. have you made changes on the computer recently?
    3. What is the Toshiba laptop model number?
    4. do you get an error message?

    Method 1
    If you use Windows 7 , and then run the hardware and peripheral troubleshooting tool.

    Open the hardware and devices Troubleshooter
    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 2
    I suggest you to download and install the drivers from the Web from Toshiba website for your webcam by selecting the model number of your laptop from the following link:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
    http://Windows.Microsoft.com/en-in/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • My optical mouse 3000 does not work even if the red light is on in the background

    My optical mouse 3000 does not work even if the red light is on in the background

    Hi Russell,

    Thank you to contact Microsoft Community and we will be happy to help you with your concern.

    According to the description, it looks like you are facing a problem with the optical mouse 3000.

    It would be great if you could answer these questions to help you further.

    1. have you made changes on the computer before this problem?

    2. you receive an error message or error code?
    3 is confined with any specific application?

    I suggest you to see the steps in the following Microsoft article.


    Mouse, touchpad and keyboard under Windows problems:
    http://windows.microsoft.com/en-US/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

    Troubleshoot the incidents of the response to the mouse or wireless keyboard: http://support.microsoft.com/kb/838398

    Troubleshoot a wireless mouse that does not correctly: http://support.microsoft.com/kb/321122

    We would be more than happy to help you if the steps above did not solve the problem.

Maybe you are looking for

  • HPOfficejet Pro 8620: Lockout admin and can not only restore factory settings no printing, scanning or fax

    HPOfficejet Pro 8620 Once the upgrade to the last of my printer Mac security bug fix didn't work, printing, scanning or fax, tried to fix more than once as resinstalling followed etc. software instructions.  Then accidentally disabled the settings an

  • Cannot add a network printer

    I have a problem with the printer! I have a network printer connected to my router via ethernet. I use the printer via wifi of two macbooks. I got an error 'printer not connected' and have already tried the following several times: reset the router r

  • Photos of live Cam on SD card

    Is there a way to get the camera to write directly in the DCIM file to the SD card? Jon

  • build an array with 2 values assigned to 1 dimension

    I am wanting to build a 1 d array where the two values are assigned to each dimension.  For example: Index 0 would have a 1 and 4 are attributed to him Index of 1 would have a 2 and 3 which are entrusted Index 2 could make a 0 and 1 that are entruste

  • Imaging - printing of null

    Have a HP's Deskjet printer on windows 7 can not print from the computer but can from ipad. Try to install windows update and getting error code 80070103


HashFlare