Difference between isPromted and set the guests

Similar Questions

• Difference between hp7612 and hp7610 the printer?

  Hello
  I intend to buy a jet A3 office printer.
  Can someone tell me what is the difference between hp7612 and hp7610 the printer?
  Help, much appreciated.

  Hello

  The HP Officejet 7612 include a duplex unit to print on both sides of the page automatically in the box.

  For the HP Officejet 7610, it's an extra accessory that can be purchased separately and not included in the Cabinet.

  Other than the two models are identical.

  Kind regards

  Shlomi

• U3014, the difference between CAL1 and CAL2 modes?

  In the preset mode color space for U3014 30 "monitor, what is the difference between CAL1 and CAL2? I tried both, but couldn't say a diff.  I know they are both precalibre mode that comes with the monitor.  Any info will be appreciated.

  course at 100%.

  Look, in these internal calibration of monitors's done it with a 3DLUT. The native range is greater than AdobeRGB (in red).
  Standard and modes Custom comes with native and native range WhitePoint (GBLED whitepoint, colder than D65 native), custom mode allows yo to set your desired white point.
  At the factory, 2 calibrations are stored in LUT3D and they are NOT editable by the users (but can be corrected by GPU):
  AdobeRGB: R, G & B coordinated (especially red coordinated), white point, and gamma of 2.2. 2nd is not very accurate.
  sRGB: R, G & B coordinated, white point gamma and sRGB. 2nd is not very accurate.

  AND as typical, monitor allows yo to store values of x LUT3D 2: CAL1 and CAL2 but it only works with the Dell Solution of Calibration color (DA), and DA only works them with i1DisplayPro.
  CAL1 and CAL2 are just "USER SLOTS" for the storage of LUT3D calibrations, nothing more.
  To the factory settings, they should behave in Standard mode.

• What is the difference between OCÉ and (OCP and OCS)

  What is the difference between ECAS and (OCP or OCS).

  For example, I heard that OCS helps with the language

  and the marketing of a product.

  Could this be true as ECAS focuses on how to do things.

  and not so much things to a much higher level.

  For example, how do you set up, how you use it, how do you start, etc.

  Thank you Roger

  Roger,

  OCÉ Doghouse more. These certifications can be more CERT of intermediate or high level certificates. These were specifically developed for the gaps in the certification that did not match our OCA, OCP, hierarchy of the CMO.

  Generally, the CERT of the OCS tend to focus more on implementation. These certificates have been developed for the Oracle PartnerNetwork for areas of certification which specifically serve Oracle partners and qualify them for levels of specialization. These certifications are available for all candidates, but are directed towards members of OPN.

  I hope this helps.

  Kind regards
  Brandye Barrington

  Oracle Certification program

• What is the difference between EPMA and Essbase Studio

  If the two are not used to design applications?
  
  And a really need Essbase Studio?

  What is the difference between EPMA and Essbase Studio

  ^ ^ ^ It's a little confusing, isn't? As far as I understand the role of EPMA, it is a way to share dimensions and common data between several products Oracle EMP including Planning, Essbase and HFM. In fact, I don't know if other products live in EPMA. What is EPMA not have is a great way to supply or manipulate the dimension and fact tables (or files). Oh, there are tables of the interface, but you will write the code/use the utility of dimension EPMA to load dimensions. I must say that I never tried to load through EPMA data so that someone else will have to pronounce on it. Once the dimensions are built, you can deploy Essbase (and other products) of common and specific to the database dimensions.

  Studio is the tool you will use to go against a data warehouse, or something terribly close a data warehouse to build Essbase databases. Just for Essbase - HFM, planning, etc. are not the targets of the Studio release.

  What gets confusion / intriguing, is that when EPMA deploy Essbase apps, it uses Studio under the covers to do. So the interesting implementations where people use Studio (which is much more flexible than EPMA because it is a development tool as opposed to a dimension/data management application) to read the tables, EPMA interface (and as far as I know, the EPMA base tables) and create Essbase applications like that.

  If you think that there is overlap, I agree with you, but you can see that they are not the same.

  And a really need Essbase Studio?

  ^ ^ ^ Do not use Studio to build Essbase databases. You can go hog wild in EAS with loading SQL rules if you want, even if at some point it will be probably easier and simpler to build in the Studio. Although the Studio has been mentioned as the replacement of EAS for awhile, I suspect the effort required to build a database in Studio will keep around for quite a while EAS or Studio Lite will be out. There is a lot to say (sometimes) for the incredible flexibility EAS/Essbase-Studio requires a more methodical approach and EPMA has a very formal set of standards and methods.

  Phew, I'm sorry, I wrote a book on this subject and I bet you get a lot of differences of opinion on that.

  If you are interested in the Studio, you could do well to take a copy of 'Look smarter than you are with Oracle Essbase Studio 11' of Glenn Schwartzberg. I don't get a penny from the sale while I was among the writers of copy (Hey, I got a mention in the acknowledgements). It's a good book and an excellent introduction to the tool.

  Kind regards

  Cameron Lackpour

• What is the difference between redundancy and recovery for retention window?

  Hi all
  
  I'm still trying to get a grip on this concept of planning RMAN backup.
  
  I recently came across a situation like this.
  
  I have backups on a redundancy of 1.
  
  I have instance1, who had a job of GRID to run backups RMAN as follows
  
  Database incremental level = 0 a week at sea at 02:30
  I have backups daily, incremental level = 1 every night
  I have backups of the log of the archives through the day.
  
  What happened, was apparently on a TUE some time, the development team remove data in almost all of the tables in the schema.
  The this didn't discover until noon or so on Wednesday.
  
  I went to try to restore... and RMAN could not do. I had found a SNA for early TUES, they did... but I got the following error:
  
  RMAN > RUN
  2 > {}
  3 > SET up to this THAT SNA 4590383198282.
  4 > RESTORE database;
  5 > RECOVER DATABASE;
  {6 >}
  
  executing command: SET until clause
  
  From restoration to the 28 April 10
  allocated channel: ORA_SBT_TAPE_1
  channel ORA_SBT_TAPE_1: SID = 639 device type = SBT_TAPE
  channel ORA_SBT_TAPE_1: NMO v4.5.0.0
  allocated channel: ORA_DISK_1
  channel ORA_DISK_1: SID = 638 type device = DISK
  
  File number of the data file = 1 name=+DATADG/instance1/datafile/system.284.697137287
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the command restore at 2010-04-28 15:53
  ORA-01180: cannot create the data file 1
  ORA-01110: data file 1: '+ DATADG/instance1/datafile/system.284.697137287 '.
  
  What I did... of research, it seems that since I don't have a level 0 incremental of before, he could not reset the database in time. Precedent has been removed since, I guess I had a redundancy of 1.
  
  So, I thought that I had a week of backup they way I put it... but that assumes that the errors are found fairly quickly before the next level = 0 backup.
  
  I want at least 1 to 1.5 weeks of worth of backups. I have the problem that we do have many tapes in rotation, so I can't go because too long..may 2 x weeks at the top.
  
  I'm revising my strategy, but I am confused that I read about the difference between retention RMAN setting with window of recovery / redundancy.
  
  Can someone give me an explanation how do you understand? I read on the web and in books to oracle, and for some reason, it is not clear to me what is the best way to go... especially when I see this window of redundancy and recovery can affect?
  
  Thank you in advance,
  
  Cayenne

  Redundancy = 1 means rman will mark any more old than the backup of the last full or incremental backup of level 0 as obsolete. So it is very likely that the backup that you need for this restore has been removed after work Wednesday morning.

  The recovery window will tell rman to keep (or not obsolete brand) all necessary backups to restore to any point in time in the recovery window.

  Bjoern

• What is the difference between objects and units in coherence?

  What is the difference between objects and units in coherence?
  For example, < high-units >

  The units are the number of entries of data stored in the coherence of caches.
  The high-units element corresponds to the maximum number of 'units' (entered data, including units in order to backup, not even with objects) allowing to store in a particular JVM for a specific cache coherence. In addition, this number should be the same on all nodes (i.e. use the same cache on all nodes configuration file).
  The objects are the number of entries of data stored in cache coherence excluding the entries for other purposes (for example, backup).

  RE: To get Coherence to report object sizes you need to set the unit-caculator to binary.
  

  If you don caculator-unit set, consistency can use the default setting (set) to the report.

• What is the difference between extensions and Plugins and Add-ons?

  I'm sorry if here is not the right place for this post.

  What is the difference between extensions and Plugins and Add-ons? Apparantely, they differ in some sense or aspect, but I do not know how. Please, if it is not too complicated, explain in detail and simple language. Thanks in advance to 1 million.

  Kind regards
  Danesh

  Hi Danesh,

  You should take a look at this article for an explanation. Plugins and extensions are essentially types of Add-ons as well as of the characters and themes.

  Hope this helps!

• What is the difference between Firefox and Namoroka 64-bit? I have a 64-bit computer. Which should I use?

  What is the difference between Firefox and Namoroka 64-bit?
  I have a 64-bit computer. Which should I use?

  The officially supported only is Firefox - which is your best choice, unless you want to test the new features...

  http://www.Mozilla.org/en-us/Firefox/new/

• What is the difference between dawn and the beta?

  What is the difference between dawn and the beta?

  Beta is the next version of Firefox that is due to be released in 5 weeks, and Aurora is the one after that--like an Alpha version of development.

• Is the difference between TSMC and Samsung Chip in the real Iphone 6 s? If this is the case, how can I found it before buying a new? How can I

  Is the difference between TSMC and samsung chip processors in the real Iphone 6 s? If this is the case, how can I found it before buying a new one?

  No, it isn't.

• What is the difference between AXIEM and EMSIght? What are the benefits of AXIEM by EMSight if any?

  I wonder what are the differences between AXIEM and EMSight. Are associated with application? One is better than the other? Please explain.

  AWR estimated AXIEM most powerful plan EM Simulator around.   AXIEM is at the center of continuous research and improvement, while EMSight is only worked on if revealed serious flaws.  Here is a summary of the differences:

  Mesh

  • EMSight must mesh the nearest grid drivers using rectangles.  This causes the mesh to have more elements mesh when there are small and large geometries.  The grid should be small enough to capture the small geometry but then causes large geometries to mesh more.   In addition, angled or curved structures causes inefficiencies mesh.
  
  
  • AXIEM STS forms, rather than a grid.  In addition, the mesh can be rectangle or triangle.   This allows a much more efficient mesh.   AXIEM generally have a much more efficient
  
  
  • AXIEM contains the ability to process forms to clean geometries that cause inefficiencies of the mesh.  EMSight does not have this feature.
  
  
  • AXIEM can forms thick metal mesh, EMSight can not, and user must make approximations when thick metal will change coupling (loss is recorded properly with the thickness of the metal)

  Ports

  • The ports are for the most part similar, but parasites due on AXIEM ports are less.  In addition, the AXIEM has a side wall, thus the effects of not move of the terms of reference of the edge of the line are a lot less AXIEM in.
  
  
  • Ports can be added to most any place in geometry with AXIEM.  For EMSight, the ports are usually only added outside the geometry and have limitations to the aircraft on either side of the reference speaker.

  Problem solvers

  • EMSight does not have a low frequency Solver.  Stop low-frequency and then extrapolate to DC.  This usually works well, but you must take into account if the extrapolation is accurate.  AXIEM presents both a low and high frequency Solver so will do better in a low frequencies generally much better in DC.
  
  
  • Solver of EMSight scales O (n) ^ 2 for memory and O (n) ^ 3 for the moment.   It has a special algorithm to break the question of memory, but the question of time is the killer.  AXIEM has a direct Solver which scales in the same way and an iterative Solver which will scale O (nlogn).   In other words, AXIEM can solve a lot of bigger problems than EMSight.
  
  
  • Several AXIEM processes are multithreaded as EMSight.

  Speaker

  • EMSight is inside a perfect driver side wall.   This works well if you the circuit is in the same cavity.  If not, you must know the rules of them on to the forms of space of the flanks and how that much to extend the port could reference planes.   AXIEM is not here.   AXIEM does not currently have to simulate a perfect driver side wall.

  I don't know that I missed a few aspects of the tools.   From the point of view of the AWR that AXIEM is the tool of choice, except in a few cases have been EMSight may be required.

• What are the practical differences between SEL20F28 and SEL16F28?

  What are the practical differences between SEL20F28 and SEL16F28?

  The 20 is much sharper on the edges and less vignetting.

  The 20 also provides more convenient angle of view walk-around lens.

• What is the difference between tear and Brüning cd

  What is the difference between tear and Brüning a cd.

  Hi SirNickLong,
  Here are a few links to explain the difference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/rip-music-from-a-CD
  http://Windows.Microsoft.com/en-us/Windows-Vista/demo-burn-a-CD-or-DVD
  hope this helps,
  Eddie B.

• What is the difference between nc6320 and nx6320 laptops?

  What is the difference between nc6320 and nx6320 laptops?

  Can I use the same drivers for each of them?

  Hello:

  There is not much difference.

  If you want to compare all the details you can check this link:

  http://h18000.www1.HP.com/products/QuickSpecs/12428_div/12428_div.PDF

  You can probably use the same drivers for either, but they all have both their own support pages and separate driver.

  nc6320:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839154&lang=en&cc=us&TaskID=135&prodSeriesId=1839146&prodTypeId=321957

  NX 6320:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=1839169&lang=en&cc=us&TaskID=135&prodSeriesId=1839144&prodTypeId=321957

  Paul