Differences in time between the start date and end Date

Similar Questions

• Differences in time between the SD card and the pictures folder.

  Every time I have to import pictures from a card SD of my camera in my images folder, the properties in the image file is a compatible 1 hour less than on the SD card.  And when I open the file photos with picture Windows, time Gallery constantly advance before time assimilating as well as on the SD card (withdrawn).  Why?

  All the images in the photo folder reflect this incorrect time information regardless of when they were taken (summer time vs non - DST).

  Thank you.  My camera and Windows Photo Gallery offer the same and exact time.  When you move a camera image in a file of photos on my PC, the time adjusts backwards by one hour.  I don't understand how this can be a function of camera setting.  A more reasonable response was delivered by one of your colleagues at the: http://msdn.microsoft.com/en-us/library/windows/desktop/ms724290(v=vs.85).aspx

  But thank you.

  =======================================

  My thought was that maybe the time in the camera
  before the DST change which would have
  account of the gap of 1 h. If it's wrong in
  this instance... so be.

  Excuse me for life.

• How to measure the difference in time between the passage by zero of a sine wave and the rise time of a pulse on a same graphic?

  I have a sine wave of 50 Hz and a pulse of the signal on the same chart. The difference in phase between the two is between 0-90 degrees.

  Now I need to calculate the time difference between (when the sinusoidal wave passes through zero volts) and (when the pulse increases). The frequency will remain about even for the two signals.

  The request is for a three-phase generator. In simple terms, when the difference in time between the passage to zero of the sine wave and pulse increases increases, it means that the load on the generator has increased.

  I am a novice user of LabView (version 9, 2009), maybe it's a very simple problem but I was pulling on my hair for the past few days and couldn't understand anything. Any help would be greatly appreciated. I use DAQ USB-6008 to measure these tensions and the impulse of the generator and a sensor

  I have attached a jpg file (a graphic that I just did with excel to explain). The time 't' is what I'm trying to measure

  

  See you soon

  Zdzislaw

  Awais.h,

  For problems of this kind I recommend start writing the granular steps you would take to manually fix this problem.  You can't say LabVIEW (or any programming language) If you can't succinctly describe the solution to your problem.

  The I want to address this problem is to:

  1. find all the zero crossing points and edges on the rise
  2. for every rising edge find the difference between the timestamp and previous passage by zero

  Here is an implementation of this algorithm LabVIEW:

  

• time between the start and end

  I have reservation with 4 columns of table
  
  start end id room
  20.10.2011 09:00 20.10.2011 12:00 1 100
  
  How can I get the following result
  
  time room id
  09:00 1 100
  09:30 1 100
  10:00 1 100
  10:30 1 100
  11:00 1 100
  11:30 1 100
  12:00 1 100
  
  can someone help me?

  It should work

  WITH
      t AS
      (
          SELECT
              TO_DATE ('20-Oct-2011 09:00','dd-mon-yyyy hh24:mi') start_date_time,
              TO_DATE ('21-Oct-2011 11:30','dd-mon-yyyy hh24:mi') end_date_time,
              1 id,
              100 room
          FROM
              DUAL
          UNION ALL
          SELECT
              TO_DATE ('20-Oct-2011 09:00','dd-mon-yyyy hh24:mi') start_date_time,
              TO_DATE ('21-Oct-2011 11:00','dd-mon-yyyy hh24:mi') end_date_time,
              2 id,
              200 room
          FROM
              DUAL
      )
  SELECT
      TO_CHAR(start_date_time + (column_value-1)*(1/(24*2)),'dd-mon-yyyy') start_dt,
      TO_CHAR(start_date_time + (column_value-1)*(1/(24*2)),'hh24:mi') start_time,
      id,
      room
  FROM
      t,
       table(
         cast(
               multiset(
                           select  level
                             from  dual
                             connect by level <= ((end_date_time - start_date_time)*24*2) + 1
                         )
               as sys.OdciNumberList
              )
        );
  

  Test case with the smaller date range

  WITH
      t AS
      (
          SELECT
              TO_DATE ('20-Oct-2011 09:00','dd-mon-yyyy hh24:mi') start_date_time,
              TO_DATE ('20-Oct-2011 11:30','dd-mon-yyyy hh24:mi') end_date_time,
              1 id,
              100 room
          FROM
              DUAL
          UNION ALL
          SELECT
              TO_DATE ('20-Oct-2011 09:00','dd-mon-yyyy hh24:mi') start_date_time,
              TO_DATE ('20-Oct-2011 10:30','dd-mon-yyyy hh24:mi') end_date_time,
              2 id,
              200 room
          FROM
              DUAL
      )
  SELECT
      TO_CHAR(start_date_time + (column_value-1)*(1/(24*2)),'dd-mon-yyyy') start_dt,
      TO_CHAR(start_date_time + (column_value-1)*(1/(24*2)),'hh24:mi') start_time,
      id,
      room
  FROM
      t,
       table(
         cast(
               multiset(
                           select  level
                             from  dual
                             connect by level <= ((end_date_time - start_date_time)*24*2) + 1
                         )
               as sys.OdciNumberList
              )
        );
  
  START_DT          START_TIME ID                     ROOM
  ----------------- ---------- ---------------------- ----------------------
  20-oct-2011       09:00      1                      100
  20-oct-2011       09:30      1                      100
  20-oct-2011       10:00      1                      100
  20-oct-2011       10:30      1                      100
  20-oct-2011       11:00      1                      100
  20-oct-2011       11:30      1                      100
  20-oct-2011       09:00      2                      200
  20-oct-2011       09:30      2                      200
  20-oct-2011       10:00      2                      200
  20-oct-2011       10:30      2                      200                    
  
   10 rows selected 
  

  Thanks to Solomon Yakobson to its solution on thread:

  Search for a string

  I found the solution from there.

• Calculate the elapsed time between the horodateurs log Table

  Hello

  I'm looking for some codes SQL allows to calculate the elapsed time between the timestamps in a log table.  The log table has some STOP-START operations.

  I just want to calculate the elapsed time between the START and PAUSE of Transactions, as well as START and EXECUTE transactions.

  So, in the example below, the time spent must be:

  START 09:15 break 09:20 (5 Minutes)
  START 09:30 to 09:45 (15 Minutes) FULL

  Total elapsed time for LOG_ID 1234 should be 20 minutes.  This excludes the 09:20 at 09:30 BREAK at the START time.

  LOG_ID	SEQ_NUM	LOG_TYPE_CD	CRE_DTTM
  1234	1	BEGINNING	09-15 - 2013:09:15:00
  1234	2	BREAK	09-15 - 2013:09:20:00

  1234

  3

  BEGINNING

  09-15 - 2013:09:30:00

  1234

  4

  ALL THE

  09-15 - 2013:09:45:00

  Any suggestions?

  Thanks for your time

  -DT

  Hello

  Thanks for posting the CREATE TABLE and INSERT.  be sure to post the results desired from these data.

  user13071913 wrote:

  Hi thanks for the help...

  The date is a true timestamp.  ...

  Here's a sample of CREATE TABLE and a few inserts.  3 ID transaction, each with a series of journal entries.

  CREATE TABLE 'LOG_TABLE_X '.

  (SELECT 'ID' CHAR (14 BYTES) NOT NULL,)

  ACTIVATE THE "LOG_TYPE_FLG" TANK (4 BYTES) NOT NULL,

  ALLOW "LOG_DTTM" DATE NOT NULL

  );

  ...

  I'm so confused.  Is log_dttm a TIMESTAMP, you said in the story, or is it a DATE, as you say in the CREATE TABLE statement, or is it a VARCHAR2 as Thur INSERT statements?  I'll assume it's a DATE.

  I left out an important step yesterday.  The computation of the last_start, we need to use a CASE statement so that we record only the time of events STRT.

  Here's the revised query:

  WITH got_last_start AS

  (

  SELECT id, log_type_flg, log_dttm

  LAST_VALUE (CASE

  WHEN log_type_flg = "STRT".

  THEN log_dttm

  END

  IGNORES NULL VALUES

  ) OVER (PARTITION BY id - can - be

  ORDER BY log_dttm

  ) AS last_start

  OF log_table_x

  )

  SELECT id, log_type_flg, log_dttm

  , (log_dttm - last_start) * 24 * 60 elapsed

  , SUM (log_dttm - last_start) OVER (PARTITION BY ID.

  ORDER BY log_dttm

  ) * 24 * 60 AS total_elapsed

  OF got_last_start

  WHERE log_type_flg IN ("CMPT", "PAUS")

  ORDER BY id, log_dttm

  ;

  Output of your sample data:

  ID LOG_ ELAPSED TOTAL_ELAPSED LOG_DTTM

  -------------- ---- ------------------- -------- -------------

  1111 PAUS 09-26 - 2013:09:09:58.17.17

  1111 CMPT 09-26 - 2013:10:09:58 1.00.83

  2222 CMPT 09-26 - 2013:12:09:58 180.00 180.00

  3333 CMPT 09-26 - 2013:10:09:42 59.73 59.73

  In Oracle, when you subtract one DATE from another DATE, the result is the NUMBER of days between them.  In the above query, I multiplied the past columns and total_elapsed by the number of minutes per day (24 * 60), to show the time in minutes.

• How always to display the time on the start screen

  Hello

  I am so accustomed to the use of the time and the date displayed in the lower right, on the old taskbar. Is there anyway on, at least, always display the date and time on the start screen. I tried the app, the more obvious answer but does.

  Hello

  Thanks for posting your question in the Microsoft Community.

  I understand that you want to display the date and time on the start screen. Correct me if I'm wrong.

  I'm sorry to tell you that it is not possible to display the date and time on the start screen and can be seen in the bottom right of the taskbar.

  I hope tha information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Exchange of data between the main VI and sub - VI

  It is my first attempt to build a comprehensive program and hope you can help me.

  The idea is to load a set of data and to perform several calculations and operations on them, find themselves in the creation of a report file.

  What I want to do is to build a main VI which contains the data, and several sub - vi to do the math, dynamically loaded in a subgroup of experts (for the simple user interface). I thought about this architecture because I'm sure I'll have to change the calculation of VI, and I don't know how I'm going to need, so I can just add an another calc VI to the plugin dir and load it. The thing is, I have to keep moving data back from the main VI to the Subvi and maybe even between sub - vi. Is there an easy (or not so hard) how? I thought about queues, but sometimes the data is to be sent to more than a subvi, and I can't have a queue for each. The idea that I get is like a network producer-consumer mode BOX: the main VI produce some data and all those interested in this data use. Then they send the results back (as a "producer") and all stakeholders in the response it consumes.

  Attached, is a "skeleton" of what I intend to do.

  There are several ways you can accomplish this. First of all, you can use the Start Asychronous Call, which will provide a component of connector for you. So, it is easy to wire the reference to it. You could also implement a global functional (also known as a motor of action) to access the event reference. It is the approach we use for our shared events. If you have lines between the main VI and ths Subvi you to format a particular message reference. However, I don't think that this approach would correspond to what you are doing.

• difference between the binding context and link container

  Hello experts

  can you please explain to me the difference between the binding context and link container.

  I searched on the net but unable to understand the concept.

  Hello

  the BindingContext represents the DataBindings.cpx file execution and is a record of BindingContainers and their mapping pages and views. In addition it contains information about the data used by an application controls. The link container is the representation of the execution of the file PageDef and gives you access to the collections, methods, and attributes of the data used by a page or view. Context binding is a house while the link container is a piece in.

  Frank

• the difference between the intermediate process and materials first in BCP formulation?

  I do not understand the difference between the intermediate process and materials first in BCP formulation. could you give me an example to show the difference?

  The intermediate process - questions all the specifications that are used in the

  current specification.

  Raw - questioned the level of material first in the hierarchy.

  Hello Terry,

  It is used in the screen output Formulation based PCA. You can configure different PCA rule which is available in formulating exit point BOM, then when you start a screen of PCA in the base of the exit, you will see this rule.

  And the difference between the intermediate process and raw in PCA, let me explain with an example, I have a configuration hierarchy as below:

  OutputA

  A formulation

  Material X

  Output B

  Formula B

  Material M

  Material N

  If I select the output B in formulating A framework, and when I run a screen of PCA in the base of the output, I have three options:

  High level - it allows to extract A output attributes as PCA review the settings;

  Intermediate processes - it to retrieve attributes material X and B output like BCP review the settings;

  Raw - it will extract attributes of material X, output B, M and N of material material as PCA review the settings.

  I hope this helps.

  Thank you

  Jessie

• Difference between crsctl start crs and crsctl start cluster

  Hello
  What is the difference between 'crsctl start crs' and new setting on 11.2 "crsctl start cluster" both have the same result?
  
  Bytes

  Hello

  'crsctl start crs' and new setting on 11.2 "crsctl start cluster" both have the same result?

  We can say not having the same result.

  crsctl power crs - manage start/stop the entire stack of Oracle Clusterware on one node, including the OHASD process, this command should be used only on the local node.

  crsctl power cluster - managing start/stop battery Oracle Clusterware on the local node if you do not specify either - all or n and the remote nodes if option-n or - all be specified, NOT including the OHASD process. You cannot start and stop clusterware stack without running OHASD process.

  Despite crsctl power crs manage all Oracle Clusterware stack on the local node crsctl power crs not allow you to manage the remote nodes, unlike crsctl power cluster which allows to manage all nodes, but if the process of KARINE is runing.

  To manage Oracle Clusterware battery on remote nodes, the ohasd (Oracle high availability Services Daemon) should run on all managed nodes. (ie using crsctl start cluster - n , )

  So, if you try use crsctl start cluster node1 - n, node2 and node1 your local node and node1 or node2 OHASD don't not running this command will be fails.

  Kind regards
  Levi Pereira

• Validate the difference in days between the dates in a table

  Greetings,
  
  I have a tabular form and date on each line. When the user saves the form, I want to sort the rows by chronological order of these dates, then go get the first and last date, calculate the difference between them and validate it.
  
  Does anyone know how to do?
  
  From now on, I came up with this:
  
  1. a PL/SQL Page process "before the calculations and Validations' which creates a collection and inserts lines in my tabular form (p_c004 being the date field):

  begin   
    if apex_collection.collection_exists('UPDATE_DATES') then
      apex_collection.delete_collection('UPDATE_DATES');
    end if;
  
    apex_collection.create_or_truncate_collection('UPDATE_DATES');
  
    for i in 1..apex_application.g_f04.count
    loop
        apex_collection.add_member(
            p_collection_name => 'UPDATE_DATES',
            p_c002            => htmldb_application.g_f02(i),
            p_c003            => htmldb_application.g_f03(i),
            p_c004            => htmldb_application.g_f04(i),
            p_c005            => htmldb_application.g_f05(i),
            p_c006            => htmldb_application.g_f06(i),
            p_c007            => htmldb_application.g_f07(i));
    end loop;
  end;

  and
  
  2. a "PL/SQL Error: Validation

  DECLARE
    l_count NUMBER;
  BEGIN
    apex_collection.sort_members('UPDATE_DATES', 4);
    l_count := apex_collection.collection_member_count('UPDATE_DATES');
  
    SELECT
    to_date(c004(l_count),'DD/MM/YYYY') - to_date(c004(1),'DD/MM/YYYY') Difference 
  
    FROM 
    apex_collections 
  
    WHERE 
    collection_name = 'UPDATE_DATES'
    and to_date(c004(l_count),'DD/MM/YYYY') - to_date(c004(1),'DD/MM/YYYY') < 30;
  
  EXCEPTION
    WHEN NO_DATA_FOUND THEN
      raise_application_error(-20101, 'Error');
  END;

  In my understanding, the validation must sort the collection in chronological order of the dates entered, calculate the difference in days between the nearest and farthest date and return it if it's less than 30 years (the difference in days allowed). If it's more than 30 years, the SELECT statement does not return anything and my block of exceptions raises a custom error that will trigger the validation "process of refusal."
  
  But when I try this, it tells me c004 does not exist and if I drop the parentheses, it works, but of course, it does not give the desired result.
  
  Any ideas?
  
  Best regards
  Mathieu

  Assuming that your domain is c004 then I don't see the need for the sorting of the collection.

  You can write a simple SQL select that sent you the desired result.

  Maybe something like this not tested

  SELECT
    max(to_date(c004,'DD/MM/YYYY')) - min(to_date(c004,'DD/MM/YYYY') ) Difference
    FROM apex_collections
    WHERE collection_name = 'UPDATE_DATES';
  

  The test if the result is > 30 days. If that's what you want to know.

• I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  I was wondering what the difference was between the powerbeats 2 and the powerbeats 3. What is this new "chip" in the powerbeats 3?

  Hello

  Main differences are:

  • Up to 12 hours of battery life with Powerbeats3, which use chips to W1 Apple energy-efficient (vs. up to 6 hours of battery life with Powerbeats2).
  • A quick charge of 5 minutes for a typical use of an hour (vs 15 minutes to load).
  • Improved ergonomic design.

  More information:

  http://www.Apple.com/shop/product/MNN02LL/A/powerbeats3-wireless-earphones-shock-Jaune

  http://www.beatsbydre.com/earphones/browse-earphones/wireless-earphones/ML8V2.ht ml

• What is the difference between the Service Station and Tempro?

  Searched for information on this, but have not been able to find:

  What is the difference between the Service Station and Tempro?

  I just run the wizard upgrade Toshiba and it installed the gas station but Tempro is already installed and seems to do the same.

  Concerning

  Bushy

  Hello

  These two tools are Toshiba one informs you of the new driver updates available on the Toshiba driver page.

  AFAIK Tempro is slightly older than the gas station.
  In addition the gas station seems to provide a bit more options and features like tool Tempro.
  However, I recommend using one my favorite utility's Service Station

• What is the difference between the HX - 90v and HX - 80 coming cameras?

  What is the difference between the HX - 90v and HX - 80 coming cameras?

  Thank you!

  I'd say it's supposed to be a fill, a little brother to the HX90v

  It removes the control ring and the GPS, and I think the rest is the same.

  It is for those who want the HX90v but the price is a bit steep for the compact range, and they need not necessarily GPS or the ring of command, just a camera that works.
  This kind of thing, at least to my knowledge.

• What is the difference between the NEX-5 and NEX 5R

  I would like to know what is the difference between 5R NEX5 and NEX to help me choose the best.

  Thank you

  Here are some key differences between the NEX-5 and NEX - 5R.

  NEX-5

  • Sensor CMOS APS - C with a resolution of 14.2 million pixels
  
  
  • video recording Full HD 1080/60i
  
  
  • the speed of 7 frames per second in burst mode
  
  
  • ISO sensitivity up to 12800
  
  
  • Sweep Panorama and 3D Sweep Panorama modes
  
  
  • Autofocus contrast with 25 points

  NEX5-R

  • Sensor CMOS APS - C with a 16.1 megapixel resolution
  
  
  • video recording Full HD 1080/60 p
  
  
  • the speed of 10 frames per second in burst mode
  
  
  • ISO sensitivity of up to 25600
  
  
  • Panoramic scan mode
  
  
  • Quick autofocus hybrid with contrast of 25 points of 99 points phase detection autofocus and auto focus

  In addition, the NEX5R has built-in Wi - Fi that allows you to install applications and extend the functionality of the camera. Built-in Wi - Fi will also allow you to transfer images wireless to a smartphone, Tablet, the computer and the TV.

  If this post answered your question, please mark "accept as a Solution.