Do not capture Table lines present on the Interface

Similar Questions

• A dynamic table lines disappear after the edge of the page.

  Hi I have a dynamic array with two buttons: "Add line" and "delete line" I have two problems:

  1. is it possible to add more than 1 row at the time?

  2. How do my document to add the new page when the line reaches the edge of the content area?

  I have attached my doc

  Thank you very much

  You can add only one instance at a time, but you can call the method addInstance several times to achieve the same thing.

  Make sure that your table container is set to flowed and that your overlow conditions are set to continue on the page following (also, I noticed that your subform table do not have the box set allow pagebreaks).

  Paul

• Not all patterns are presented in the Application in MISP schemas

  Hello

  I try to use MISP (Database Migration Unicode Assistant) to assess potential problems for a conversion NLS_CHARACTER_SET and note that not all schemas are indicated in Application schemas folder in the Navigator Panel. Especially I want to scan.

  In my case, it's showing only 4 patterns when there is almost more than 10 + in the database.

  Everyone got to experience that too? Could not find anything on MISP known issues?

  Thank you

  Eduardo.

  Have you checked if the missing patterns have all columns of type VARCHAR2, CHAR, CLOB, or LONG?

  Thank you

  Sergiusz

• removal of table of contents and the interface on dps app

  Hello

  my project is to make an application using the digital publishing suite,

  When each page is a sequence of jpeg auto playing and loops ,

  keeps looping until striking to swipe to the next page and so on.

  I don't want to have to the table of contents or interface options.

  I want it to look in a digital book when the only option is to turn the page back.

  don't you think it's possible?

  thanx

  Yes, there is a solution that will allow you to avoid show nav bars. You create a slideshow full invisible screen on all pages that are selected by scanning and tap. In this way, when the user clicks anywhere on the page, it interacts with the slide show but seems to have no effect on the user. You must add on the top of the slide show navigation buttons so that users can access other items.

• Questioning OM for capture Deliver_To lines

  Development of report on OM to capture Deliver_To lines
  
  Description of the problem:
  
  With the help of applications 11.5.9. Creation of SQL to create a view for OM lines that are available and not available (contract number and actual pieces)
  
  Attached is the code that I adapted an existing report, which I use to develop a new script that can retrieve the header data and level data line for Sales Orders of OM module. The issue I'm having incorporates the second query that identifies distribution to the delivery address (built this query using a claire OTN position). We just started to use deliver_to fields in OM to follow the new destinations in order deliver to the address. The second script will look for in the deliver to info. but I can't understand how to tie in my first success of script. I get several records back since the first great script, where I expect a record based on the result assigns a number...
  
  The other issue I'm having is with the selection data sub-line. TO_CHAR (OOL.line_number): '. ' || TO_CHAR (oolb.line_number) subline_number.
  
  It is only pulling in the last digit of sub-line, it's dire.1,.2 etc...
  
  Any guidance is appreciated. I know that the first part of my problem is most likely the join, but so far no luck to find a better way to join these tables, or find a table that contains the fields of deliver_to directly, listed as ship_to and address do.
  
  SELECT OOH. ORDER_NUMBER
  ool.cust_model_serial_number CONTRACT_NUMBER
  ool.cust_po_number
  , "RACUS. CLIENT_NAME
  ool. CUSTOMER_DOCK_CODE SITE_NUMBER
  -oefvoh.ship_to_org_id,
  oefvoh.ship_to_address1
  oefvoh.ship_to_cty_st_zip_ctry
  oefvoh.bill_to_address1
  oefvoh.bill_to_cty_st_zip_ctry
  DELIV_SU. LOCATION DELIVER_TO
  DELIV_SU. LOCATION DELIVER_TO_LOCATION
  DELIV_LOC. DELIVER_TO_ADDRESS1 ADDRESS1
  DELIV_LOC. DELIVER_TO_ADDRESS2 ADDRESS2
  , to_char (ool.line_number): '. ' || TO_CHAR (oolb.line_number) subline_number
  ool.ordered_item
  DECODE (OOL. SHIPPED_QUANTITY, NULL, OOL. ORDERED_QUANTITY, OOL. SHIPPED_QTY OF SHIPPED_QUANTITY)
  TO_CHAR (OOL. ACTUAL_SHIPMENT_DATE, 'DD-MON-YYYY')
  , TO_CHAR (ool.fulfillment_date, 'DD-MON-YYYY')
  ool.accounting_rule_id
  rr.name ACCOUNTING_RULE
  OOL. SHIPMENT_DATE OF ACTUAL_SHIPMENT_DATE)
  ONTARIO. OOH OE_ORDER_HEADERS_ALL,
  ONTARIO OE_ORDER_LINES_ALL OOL,.
  Ont.oe_order_lines_all oolb,
  AR. HZ_CUST_SITE_USES_ALL SITE,
  AR HZ_LOCATIONS DELIV_LOC,
  AR HZ_PARTY_SITES DELIV_PS,
  AR HZ_CUST_SITE_USES_ALL DELIV_SU,
  APPS. ADDR RA_ADDRESSES_ALL,
  APPS. RA_CUSTOMERS RACUS,
  OEFV_ORDER_HEADERS OEFVOH,
  AR. RA_RULES RR
  WHERE OOH. ORDER_NUMBER = '10000000' and
  OOH. HEADER_ID = OOL. HEADER_ID
  - AND TRUNC (OOL. FULFILLMENT_DATE) BETWEEN V_BEG_DATE AND V_END_DATE
  AND OOL. DELIVER_TO_ORG_ID = SITE. SITE_USE_ID (+)
  - and ool.invoice_to_org_id = oefvoh.ship_to_org_id (+)
  AND ooh.order_number = oefvoh.order_number
  AND THE LOCATION. CUST_ACCT_SITE_ID = ADDR. ADDRESS_ID
  AND DELIV_LOC. LOCATION_ID (+) = DELIV_PS. LOCATION_ID
  AND DELIV_SU. SITE_USE_CODE = "DELIVER_TO".
  AND OOH. SOLD_TO_ORG_ID = "RACUS. CUSTOMER_ID
  and ool.line_type_id = oolb.line_id (+)
  and rr.rule_id = ool.accounting_rule_id
  AND NVL (OOL. SHIPPABLE_FLAG, 'Y') = ' no no deliverables element at the level of the line
  - AND COOL. FLOW_STATUS_CODE IN ("FULLFILLED", "CLOSED")
  "- ool.fulfillment_date from" 20-OCT-2008 to 25-NOV-2008. "
  order of ooh.order_number;
  
  
  
  Select a.order_number, a.invoice_to_org_id, b.site_use_id
  oe_order_headers_all a, hz_cust_site_uses_all b, hz_cust_acct_sites_all c, hz_cust_accounts_all d, hz_parties e
  where a.invoice_to_org_Id = b.site_use_id
  and b.site_use_code = 'DELIVER_TO'
  and b.cust_acct_site_id = c.cust_acct_site_id
  and c.cust_account_Id = d.cust_account_Id
  and d.party_id = e.party_id;

  You must initialize the environment for org by using fnd_client_info.set_org_context or mo_global.set_policy_context, according to the release.

  Thank you
  Claire

• to force the Bill AP must be validated after the execution of the interface

  Hello
  I use the OPEN INTERFACE INVOICE for the INVOICE of the AP to load. Once I loaded, I noticed that the status of the invoice is not VALIDATED. How to make the INTERFACE program to validate when loading?
  
  or any API / bills program I can use to validate the existing?
  
  I had thousands of invoices to load.

  You can create a set of request which includes 2 sequential steps
  (1) importation of invoices
  (2) validation of the invoice

  And then run the entire application. In this way, the validation of the Bill runs automatically after importation of invoices.

  Hope this helps,
  Sandeep Gandhi

• Digital control do not light the Subvi table lines

  Hello people of the forum NOR!

  I have a small question, I think you could help me:

  I tried to find a way that would allow my program read data, acquired from a millimeter and use a table - with coefficients - multiply the data obtained.

  When it was written directly on my program, it worked fine, but when I created a sub VI to 'clean up', he ceased to alternate values and it uses the fixed value of the Sub VI.

  The sub VI has a connector to the CNC.

  This program is the 'read the table under vi' attached to this message and the other, is the program I use to get my data.

  Thank you before useful assistance.

  Concerning

  Leandro

  Hello Leandro, Dennis

  I don't think I got the problem right so I can only guess:

  VI Sub is placed outside the Structure of sequence and therefore only runs once at the beginning of the VI.

  As Dennismentioned, since the "Table" does not have default values assigned it cant work now.

  It would be better if you post an another Set of screws: (Bevore, adding the Sub VI and after)

  Concerning

  Moritz M.

• Show the button when in a table line selector is checked.

  Hi all

  I have a problem with the display / hide button in the tabular presentation selector line box is checked.

  It is used when the line is posted. But when I add the line and the line is not registered it does not work.

  Could you you that someone please let me know why this does not work when the line is not registered?

  I have the ready example in apex.oracle.com

  APP ID: 62796

  User: Nancy

  Pass: Devone123

  WS: troylagi

  Thank you

  Troy.

  Hi Troy,

  Your new line in the form of tables is dynamic html, so the scope of the event must be dynamic. I changed your dynamic action that this:

  

• Theme 25 - items are not correctly displayed in the presentation of the grid

  Hi all

  APEX 4.2.5.00.08

  Oracle 11g Enterprise Edition

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed. I read a blog and he said to remove all the colspan which will then automatically display elements. I did, but it did not work. The form consists of several parts using a list of tabs on the page. Parts of the tab using the model 'Region without the buttons and titles' of the region. I tried to replace the template "no model", while he was a little better, it has not corrected the problem.

  I've migrated the application and objects in the db at the APEX. ORACLE.COM (it took a few hours) and I hope someone can resolve my problem until the site is upgraded to 5.0.

  Workspace: RGWORK

  Application: KIMBERLY (33925)

  Page: Vehicle details (13)

  Username: TESTER

  Password: test456

  The first screen will be a Update/View vehicles 1 choice menu

  Choose this option and a report with a single line id.

  Select this line and display page 13.

  You have Developer access but please keep me on what has been fixed. I don't want remedy you. I want to know what has been resolved as well.

  Please get back me to me as soon as POSSIBLE because the site is upgraded to 5.0 this Friday.

  Robert

  sect55 wrote:

  I am new to 4.2. I created an application on 4.1 and exported 4.1 and imported to 4.2. I'm trying to view the forms as they were posted in 4.1. But I have problems with the presentation of the grid. The elements are the overlap between them and the regions is narrowed.

  Why you want to switch to theme 25 instead of simply retain the theme that was used in 4.1?

  Go wrote:

  Robert,

  Look at your application. just a simple change.

  change:

  Region: Veh/equip Information

  Presentation of the grid:

  Start the new row: Yes

  That helps, but it's not the whole story, as it appears the layout is still affected by the problem described in the thread previous Theme 25 region without buttons and issuance of securities

  Applying the fix I suggested it (in 78449 application I created a copy to ensure that I was working with the initial problems) Gets the items on the same line, but I guess that's not the same as the original provision and it doesn't look very good.

  Basically, I would say either stick with the original theme or by switching to a 4.2 theme that still use the page layout based on a table (for example, 24 or 26). Theme 25 is difficult to work with and works best with presentations created especially for her from the start.

• I need to number the lines of my page document for the presentation of the journal. Help, please!

  I need to number the lines of a document to be submitted to a journal. I can make a section in the document, but I can't find a command, and then add the line numbers.

  Hi Misha,.

  3 pages includes number of words to display as a menu item in the view menu:

  

  The County appears at the bottom left of the page and it shows more options when you click on it. Unfortunately, "number of lines" is not included in the available options:

  

  If you had ' 09 Pages on your Mac and did not intentionally removed it when you installed 5 Pages, it will always be there, in a folder named iWork ' 09, in your Applications folder.

  Copy your document, open the Pages ' 09 and paste the contents of your document into a word processor new document in Pages ' 09.

  Check that the end of the document is delivered on the same page (number) and to the same position on this page as in the original and making small changes at the margin to adjust it if necessary.

  Then go to edit > tools > statistics to see this more comprehensive report:

  

  Note that if you need to present the newspaper article in one format other than a file of Pages, the number of rows may change due to changes in the conversion to the new format of formatting.

  If you don't have a Pages ' 09, you can get a number of lines using tools > line numbers in OpenOffice or LibreOfficeApache. Both are applications open source, free to download and use (even if you might donate help the future evolution of the demand). The links will take you to their respective Web sites.

  Oh... One more thing (as long as Steve jobs used to say sometimes): pages (3), go (menu) Pages > provide pages of comments and make a feature request so that the line count (and line numbering) added the capability of 3 Pages.

  Kind regards

  Barry

• Webcam C910 HD Logitech does not CAPTURE on 64 bit, Win 7 ASUS but catch to end the play on 32 bit win 7 Dell as it always has?

  Webcam C910, Logitech HD worked and still works on Win 7 Ultimate 32 bit computer desk Dell, beautiful camera, however, I bought an ASUS laptop 64 bit and got Win 7 Ultimate on it too and the cam will run Skype, different sites with interaction cam FINE, but when you ask it to capture the photo of my cat , he returned and said 3,2,1, (as he always does) and says "CAPTURE FAILED".  This applies also to video on Logitech C910, just WONT CAPTURER.  I tried too many things to list, enter 12 hours with the Technical Support of Logitech divided into 4-5 calls and they are very polite but ultimately say something like 'check your reverend DirectX' well, it's new 1st class line superior ASUS laptop, also the last time, I talked to them, they said "ok, who does ", we will degenerate and call withiin 48 hours..." NO CALL... they do not have a difficulty still in their box, it claims Win 7 32 & 64 bit.  Anyone got any ideas?  Tried deleting on laptop internal cam, tried the drivers, like I said my list is VERY LONG, I quit as Logitech has apparently also.  Sometimes these things happen.  I hope that there is an intelligent person who ran into this and can help me.

  Last question, a person was very STRONG and answered a question of Fraps, I hope that I can be so lucky again.

  Thank you

  Joe_Kidd

  Guess what it was?  Logitech went through sending me boredom 920 HD Webcam FREE thinking that would fix it, there somehwhere they understood led aomething crazy Logitech and cost them tons of money...

  The person I spoke was absolute great fellow, he said, "save under" for attempted desktop capture, BINGO, it worked, so I went down in my own records and set a folder y calle C920 video and photos, tried it Win 7 says "Ok I let u do it too»

  My personal opinion, MS made restrictions of RULES TONS on Win 7 and not do good work to all the relay of messages to the public, I'm angry at Microsoft, a first time... I also have a couple other examples: I buy software and it comes to Outlook 2007, but of course it says 'OH NO '.< u="" cant="" download="" direct="" frim="" email="" unless="" u="" r="" an="" admin.......................i="" am="" an="">

  Solution, forwards to gmail, download it.

  In addition, if you have photos, videos, documents. projects, C++ files in one place on Win 7 it stain auto setting, you can't CUT and paste it somewhere else... I did copy, paste and in 2 places and delete the default location that doesn't WELL HE DELETED EVERYTHING.. . If you pasted what was in this folder in 10 others, etc then it removes all 10 places as it is in default, u try move and delete?  U R BIG TROUBLE because it deletes everything.

  I'm really fine with Windows, but Win 7 was madelike the old HP calculators, everything is back, full of blocks in the ability to do what that it is unnecessarily wasting space, I just flat thing it is worst OS they never go out, WIN 8's fate not so much "you must buy victory 8", MS is terrible in many ways although perhaps they realize has a terrible mess win 7 is and trying to run on the city as quickly as possible. Thank you

  Joe_Kidd

• Obligation to fill the values in table advanced according to the selection of a value in another article of lov (not in the advanced table)

  Hi all

  We work in a custom oaf page subdivision. We have an obligation to fill the values in table advanced based on a value selection in an element of the lov (this LOV is not in the advanced table) .can share you it please me steps or examples of code to achieve this. Waiting for response.

  Kind regards

  I do not understand completely still. What do you mean by "default in the table values must be inserted".

  You can create a dummy VO with the same columns and fix the VO in the advanced table.

  In the normal scenario, when the user clicks on submit button, browse this VO, and copy the values to the validation according to VO and appeal EO. If values gets inserted into the database.

  When the user selects the number of PO, simply run the other VO and fill this dummy VO so that values are available in the advanced table. When you click on send, do not copy these values to the EO based VO, so these lines won't get inserted.

  It work?

  See you soon

  AJ

• Possible to turn off the legacy of line break in the table of contents?

  Hello

  Say I got a long title stupidly, that I need to address (and subtitle is not an option in this case):

  Lorem ipsum dolor sit amet, adipiscing elit computer. Integer nec odio.

  Due to wide-ish the font size of the header in the document, I want to break this header in two lines.

  However my OCD uses a smaller font size, and so he could sit happily on a single line.

  The problem is that the inDesign TOC seems to be ineriting the soft breakdown and therefore the line break appears in the table of contents too.

  Is it possible to disable / prevent this?

  Thank you!

  Try to use nonbreaking spaces, or without breaks (spaces are less problematic) the part of the topic that you want to wrap instead of the line break is forced.

• Drag N Drop table lines do not move a table to another Table

  Hello

  I use 11.1.7 to develop the drag N drop rows in one table to another

  1. I create a table in the schema hr as a student (sName, brands, sId, grade) & inserting values.

  2. I create EO & three your based on Student table... only three your from wise rank as (GroupAVO, GroupBVO, GroupCVO)

  3. I create page & panelgridLayout (3 columns, 1 row), I drop these three instances of VO tabular...

  4 drag the component Source and Drop target in these 3 tables...

  Run the page... page contains perfectly with the wise group of 3 tables...

  but when I drag a line a table to another table, lines do not move...

  I check my DB too... changes there too...

  No error and exceptions in my journal...

  What is the problem? Can someone help me?

  See also - Ashish Awasthi (Jdev/ADF) Blog: adding Drag and Drop functionality for collections in the fragments of the page to create insert

  Thank you

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer