Similar Questions

• Server error internal 500 WRT54G2

  Hello everyone, I have a problem with my router WRT54G2. I was upgrading my firmware when my computer froze, so I had to leave. Afterwards, I couldn't connect to the configuration based on the web page more. I did a factory reset and installed again with Network Magic and configure my wireless key. It works now, however, I can't in the web-based configuration page. Whenever I go to 192.168.1.1 and enter my info, it says only: 500 Internal Server Error. I've always been able to access this page, now I can't, then I guess it doesn't work because of the firmware upgrade interruption. I do a lot of mac filtering and I limit the amount of IP addresses my router gives so if someone hacks my security key, they still won't be able to connect, so to access my router configuration page is important to me. I have reset (press and hold the reset button for 30 seconds - 1 minute) the router several times and still nothing. I mean, the router still works. My brother and I can always connect with our mobile phones, I can't get to the web-based configuration page.

  -What can I do to solve this problem or did I mess up irretrievably? Thank you.

  A few suggestions...

  Is first of all try to find the IP address of your router and see if she is still set to 192.168.1.1 through the command prompt. Then try to ping for the address.

  If you are able to ping, another 30 seconds and then reset flash the firmware on the router using TFTP. Download it here. Instructions here.

  If you are unable to ping it or the TFTP does not work, do a 30-30-30 reset. Instructions here.

  If these don't work, I'm ideas. Finally, you really don't need to put in place the MAC filtering because it's somehow more usable with spoof of MAC address. You would probably find that suggested on forums countless times, but just put a good passphrase WPA2 and're you good to go. If someone is good, enough to hack your WPA2 key (which is currently almost impossible), while he would have no problem getting your MAC filter.

• Citing the Oracle EBS SOA, Webservice, Got ' 500 Internal Server Error"

  Hope someone know solution to our problem, thanks in advance.

  Version: Oracle eBusiness Suite R12.1.3

  We have a webservice SOA custom in Oracle EBS, test this webservice with SoapUI.

  Found a strange problem,

  If the number of records to return isn't too many (3000 eg.less), then Web service may return records with success;

  But if the number of records to return is too many (eg.more than 6000 records), then Web service returns a "500 Internal Server Error".

  = Detailed beginning of Msg error =.

  <! DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0 / / BY" > ".
  < HTML > < HEAD >
  Server error internal 500 < TITLE > < /title >
  < / HEAD > < BODY >
  Internal error in the server < H1 > < / H1 >
  The server encountered an internal error or
  a misconfiguration and was unable to complete
  your query. < P >
  Please contact the server administrator,
  [email protected] and inform them of the time the error occurred,
  and anything you might have done that may have
  caused the error. < P >
  More information about this error may be available
  in the server error log. < P >
  < BODY / > < / HTML >

  = Detailed error Msg end =.

  Thanks Hussein, I understand the problem, to share my solution here

  ---------------------------------

  Cause

  The problem is due to a requested webservice SOAP is too large, then cause the timeout of the Apache HTTP server.

  Solution

  Increase the timeout setting in the ($INST_TOP/ora/10.1.3/Apache/Apache/conf/httpd.conf) Apache config file

  Then restart the HTTP server, check again the issue.

  Thank you

  Paul

• Error HTTP 500 - internal server error code

  Hello
  
  Before you start, I google this problem for 2 weeks now, haven't tried many suggestions on the previous forums al Lrevetu no chance. You are my last hope!
  
  Using Dreamweaver 8, SQL server (express edition) win XP pro with IIS, .net 2.0 framework, MDAC2.7
  
  Here's the problem, I have the configuration database everything correctly, cannot access it via the browser etc. no problem.
  
  In dreamweaver 8, I create a new dynamic ASP VB Script page to connect to the same database - Bingo! everything works like a charm.
  
  I then change the site to use ASP.NET VB as a model (because that's what I would like to develpop my app in), create a page ASP.NET VB, go to, click the application Panel the sign etc. + > select OLEDB SQL Server provider.
  
  I choose my server name, choose windows authentication as the connection method and then can see the dabase in the catalogue box and select it. (these are exactly the same parameters as the ASP page that I tested and worked).
  
  I click on the test button, 'Successful Test' fantastic, I think.
  Press ok
  The next window displays the connection string, I add a name for the test connection click and get the error message "Server error internal 500 - Http error code.
  
  If I click ok, and then try and spread my tables of the database = none.
  ________________________________
  I tried the following:
  I don't think that it is a database problem, one I tried with access, MySQL, and SQL server all with the same result.
  ASP works very well - ASP.NET fails. I read on other forums that ASP.NET "remotely" connect on the test server and that is where the problem may reside.
  I copied MMScript directory to the root of my c:\inetpub\www\root\ directory since it was also a suggestion.
  I added the full access of all accounts in this directory (initially after just try IIuser and those normal).
  
  My test server is local, c:\inetpub\wwwroot\pbuyer\
  localhost/pbuyer (not in front of my dw at the mo but can confirm it is set up correctly).
  
  I can only think it is a permissions issue, but as a last resort, I gave permissions for each account in all records to try to resolve the problem. Other posters have reported the Macromedia could not replicate it and therefore could not provide a solution, and all messages on the internet, there is not a solution.
  Reinstall IIS would be an idea of the gaffe?
  
  Would really aprecciate someone post a reply that I hit a brick wall!
  
  
  
  
  
  
  
  
  

  OK - I've fixed.

  For all those who have the same problem (and I know because there are literally thousands of this exact topic in all directions with no resolution) you do the following:

  Go to services to check that all of the ASP.NET services like running, for me:

  ASP.NET State service is set to manual - I clicked on start and Bingo! I can finally access my database.

• After submitting my info, I had the SERVER ERROR: 500 internal server error! There is a problem with the resource you are looking for, and it cannot be displayed. :

  Over the four days, I've lost two e-mail accounts:

  1 * e-mail address is removed from the privacy *

  2nd * e-mail address is removed from the privacy *

  I went to www.windowslivehelp.com

  I filled in all the information and answered all the question. I provided

  the email address where I can be reached: * address email is removed from the privacy *

  But when I click on submit

  "The display shows:" Server error

  500 internal Server Error. There is a problem with the resource you

  can are looking for, and it cannot be displayed' you explain or tell me

  How can I return my email accounts. Thank you and best regards

  B.Okediji sanogo

  {deleted}

  E-mail address is removed from the privacy *.

  Hi Zacheus B.Okediji,

  1. what web browser do you use?

  2. when the problem started?

  The website you are visiting had a server problem preventing the display of the Web page. It often occurs due to maintenance of the site, or due to a programming error on interactive websites that use scripts.

  For more information, see the following article:

  Get help with the Web site (HTTP error) error messages.

  If you use Internet Explorer, you can read the following article and try steps 2, 3 and 4 to solve the problem.

  Internet Explorer is slow? 5 things to try

  Note: Resetting the Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  You can also visit the following links to support Windows Live:

  "Server too busy", "Internal Server Error" and we do little maintenance to improve the service.

  Internal server error when trying to open hotmail

  Hope this information is useful.

• I just signed up for Twitter, and I can't complete my profile because of "internal server errors. What should I do?

  I can't any more than my profile because I get the message that there is a server error internal.  Can someone help me?

  Hi, MKDoris,

  It's a question of Twitter.  You can try to contact them but generally if you wait, it will return itself.

  https://blog.Twitter.com/2012/today%E2%80%99S-turbulence-explained

  Connect with Twitter

  https://Twitter.com/about/contact

• EBS 12.1.3 - 500 Internal Server Error - after using FNDCPASS to change the SYSADMIN password

  Hello guys,.

  We run ebs 12.1.3 on OEL6. At the opening session today, I was invited to display the system administrator password. I ended up using FNDCPASS for successful change:

  FNDCPASS apps/apps 0 Y USER SYSADMIN of system/xxxxx xxxxx

  Since then I could not connect in the applications with its URL - I get

  '500 internal Server Error' Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. For more details, please see the application log.

  The Apache logs have a few errors:

  CD $LOG_HOME/ora/10.1.3/Apache

  error_log.1406246400 more

  [Fri 25 Jul 06:18:18 2014] [error] [client 10.1.101.81] [ecid: 0, 1406283498:10.1.100.43:32121:0:390] file does not exist: / u02/app
  lfind/inst/apps/OFD1_ofindev01/portal/favicon.ico
  [Fri 25 Jul 06:18:19 2014] [error] [client 10.1.101.81] [ecid: 1406283499:10.1.100.43:4002:0:505, 0] mod_oc4j: could not find a failover process oc4j for destination session request: application://oacore (no island or a group).
  [Fri 25 Jul 06:18:20 2014] [error] [client 10.1.101.81] [ecid: 1406283500:10.1.100.43:4005:0:476, 0] mod_oc4j: could not find a failover process oc4j for destination session request: application://oacore (no island or a group).
  [Fri 25 Jul 06:23:21 2014] [Warning] oc4j_socket_recvfull [client 10.1.101.81] expired
  [Fri 25 Jul 06:23:21 2014] [Warning] oc4j_socket_recvfull [client 10.1.101.81] expired
  [Fri 25 Jul 06:23:21 2014] [error] [client 10.1.101.81] [ecid: 1406283500:10.1.100.43:4005:0:476, 0] mod_oc4j: application to the OC4J ofind

  J’ai " $FND_TOP/patch/115/bin/ojspCompile.pl perl - compile - hunting Pei 2 "and run cmclean.sql but the problem persists."

  What Miss me?

  Thank you

  Mathias

  Mathias,

  Here is the command on the right:

  FNDCPASS apps / 0 system / fnd ORACLE FND

  This is mentioned in (Doc ID 437260.1) mentioned above.

  Thank you

  Hussein

• 500 aftet ebs on win server 2003 installed internal server error

  After installing ebs r12.1.1 on windows server 2003
  
  and open Explorer showed the error
  
  
  internal server error 500
  
  
  Servlet error: an exception occurred. Current application deployment descriptors do not allow for the inclusion in this response. For more details, please see the application log
  
  Please solve this problem
  
  Published by: Mohamed Gamal on March 9, 2011 10:25

  You will find all the details on the error in the Apache/database logs?

  AutoConfig resulted?

  Please see if (access to forms Servlet directly (/ forms/frmservlet) causes a HTTP - 500 Internal Server Error: the current Application deployment descriptors do not include in this response.) [REF 1127104.1]) help.

  Thank you
  Hussein

• HTTP error 500: Internal Server Error

  Hello

  I try to open a URL in the browser that comes with the Blackberry device.

  But I get the following error:

  HTTP error 500: internal server error.

  I am able to open the other normal URL on my browser.

  I don't know how to solve this problem.

  Help, please.

  Concerning

  Stephenson

  

  Is this still a problem of java development?

  I don't like to repeat the same advice, but this issue cannot be resolved here in ths forum. You need to go to the web site operator and ask them to determine the problem. We cannot look in the logs of the server for you, even if you * were * willing to disclose the URL.

  Here is a quote from a HTTP guide:

  Internal HTTP 500 error

  Server Web (running Web Site) encountered an unexpected condition which does not respond to the request by the client (your Web browser or our CheckUpDown robot) for access to the requested URL.

  This is a 'catch-all' error generated by the Web server. Basically, something has gone wrong, but the server can not be more specific about the error condition in its response to the client. In addition to the 500 error notified to the client, the Web server must generate a kind of internal error log which gives more detail on what went wrong. It is up to the operators of Web Server site to locate and analyse these logs.

• Connection error: 500 Internal Server Error (html: error initializing the servlet)

  I installed Oracle EBS 12.1.1 on OL5.9 with success. I managed Logined too. But after restarting the server I have following problem.
  
  500 internal Server Error - Servlet error: an exception occurred. ' everything occurs while trying to open the login page.
  
  I checked the details flowing:
  1. adstrtal.sh going just with output state 0.
  2. State of adopmnctl.sh are very good.
  3. application.log
  +/EBS/applmgr/dev/inst/apps/DEV_r-D620/logs/ora/10.1.3/J2EE/oacore/oacore_default_group_1/application.log+
  
  13/02/26 13:59:05.81 html: error initializing the servlet
  java.lang.NoClassDefFoundError: has not been initialized class oracle.apps.fnd.profiles.Profiles
  at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:126)
  at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.loadServlet (HttpApplication.java:2379)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4830)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4754)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.getRequestDispatcher (HttpApplication.java:2978)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:738)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:313)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:199)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
  to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:29)
  to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:879)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:619)
  13/02/26 13:59:05.82 html: Servlet error
  java.lang.NoClassDefFoundError: has not been initialized class oracle.apps.fnd.profiles.Profiles
  at oracle.apps.fnd.sso.AppsLoginRedirect.AppsSetting(AppsLoginRedirect.java:126)
  at oracle.apps.fnd.sso.AppsLoginRedirect.init(AppsLoginRedirect.java:170)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.loadServlet (HttpApplication.java:2379)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4830)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.findServlet (HttpApplication.java:4754)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpApplication.getRequestDispatcher (HttpApplication.java:2978)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.doProcessRequest (HttpRequestHandler.java:738)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.HttpRequestHandler.processRequest (HttpRequestHandler.java:453)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:313)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)].server.http.AJPRequestHandler.run (AJPRequestHandler.java:199)
  to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
  at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:234)
  to oracle.oc4j.network.ServerSocketAcceptHandler.access$ 700 (ServerSocketAcceptHandler.java:29)
  to oracle.oc4j.network.ServerSocketAcceptHandler$ AcceptHandlerHorse.run (ServerSocketAcceptHandler.java:879)
  to com.evermind [Oracle containers for J2EE 10 g (10.1.3.4.0)]. util. ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
  at java.lang.Thread.run(Thread.java:619)
  
  
  Is it possible to fix this?

  Hi Roderick,

  Solution 1 is just a workaround (because it would turn off distributed cache JVM), the best would be using solution 2 and use a different port.

  Kind regards
  Ronald

• 500 internal Server Error &amp; amp; CFHTTP

  Hello
  I am posting the URL using the following:
  < cfhttp url = "#form.ext_url #" resolveurl = 1 throwonerror = "No" > < / cfhttp >
  
  #cfhttp.statuscode # watch a 500 Internal Server Error. The URL I'm validation exists and is valid. Why this error is coming? We use CF MX 7 on our server.
  
  Thank you!

  I found the problem. The URL is valid in IE but was throwing an error in Mozilla. If the CF validation worked as it should.

• Forms: 500 Internal Server Error

  Everything worked fine until I installed the latest Sun Java version 6 Update 16. Now, when I'm
  
  trying to "run the form" my web browser session blocks (Firefox Morizolla). To verify that the
  
  HTTP listener works correctly I enter the following URL in a Web browser
  
  http://127.0.0.1:8889 / j2ee
  
  and I get the following error:
  
  500 internal Server Error
  OracleJSP: oracle.jsp.provider.JspCompileException:
  Errors
  
  compilation: C:\DevSuiteHome_1\j2ee\DevSuite\application-deployments\default\defaultWebApp\persistence
  \_pages\\_index. Java
  
  Error occurred during initialization of VM
  Could not reserve enough space for lots of things
  
  
  Environment
  Forms [32 bit] Version 10.1.2.0.2 (Production)
  V operating system Microsoft Windows XP Professional 5.1.2600
  Java version 6 Update 16 [recently installed]
  
  Please, please can someone help?
  
  Thanks in advance!

  Hello

  ++ 500 internal server error + OracleJSP: oracle.jsp.provider.JspCompileException: +.
  Errors

  the above error is you're Formsweb.cfg because you're java Sun is not compatible Please reinstall initiator of Java.
  have you changed something in formsweb.cfg? if yes please check for space in this.

  Sarah

  Published by: S@R@h on November 3, 2009 20:36

• I can't load any web pages (500 Internal Server Error)

  I can't currently load web pages when using Firefox. I get a "500 Internal Server Error" standard page on each site. I tried with IE and there is no problem in loading pages.

  I tried to create a new profile, uninstalling and reinstalling, put to upgrade to Firefox 4 (used previously 3) and uninstalling and wiping all profile information, but nothing has worked.

  The problem began when a video player in Flash has crashed (channel4.com). Windows has been completely insensitive and I couldn't exit the full screen video. I tried pressing ESC, ctrl + ESC, ctrl + alt + delete etc but nothing worked and I had to hold the power button on the tower for 4 seconds to turn it off. When I started upward again once I was introduced to the screen when Windows fails to load normally and I chose the "start Windows normally", that had started Windows successfully. Since then I been unabe to view web pages in Fireox, I always get the 500 Internal Server Error page.

  It is a strange and I'm out of ideas, any help would be appreciated because I really want to go back to using Firefox!

  Thank you

  What security (firewall) software do you have?

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

• {Cannot acess Photos in iCloud - "Internal Server Error", "error code": 500}

  Hello. I've always used Photos app inside icloud, but since 2 weeks ago, I just cant. Whenever I try to use photos inside icloud.com app I got the same error ("Internal Server Error", "error code" {: 500}.)

  I can still see my photos get updated through photostream and icloud windows app. The problem is the only application of photos inside icloud.com

  IS FATAL

  true

  NAME OF THE APPLICATION

  photos

  TYPE

  Server

  JOURNAL

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  BUILD NUMBER

  15G.98d4967

  HOST

  www.iCloud.com

  USER AGENT

  Mozilla/5.0 (Windows NT 10.0;) WOW64) AppleWebKit/537.36 (KHTML, like Gecko) Safari/537.36 Chrome/48.0.2564.97

  IDDM

  1029823930

  ENVIRONMENT

  PROD

  RECENT JOURNAL POSTS

  Tuesday, February 2, 2016 17:46:18 GMT: WARN: could not send message.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: rules of polyfill or region no. Intl. Jump RegionFormatter to initialize.

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: running the Application Photos

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: early transition from null to null

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: since the passage of null in [Object Photos.PreStartupViewController:object619]

  Tuesday, February 2, 2016 17:46:19 GMT: INFO: send request: GET https://p18-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & tanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruuid clientIns = 7 d 091310-0f49-4ff0-b86a-29663ff377d9

  Tuesday, February 2, 2016 17:46:19 GMT: DEBUG :--> request 1: GO to https://p18-1-photosws.icloud.com:443/ph/startup? clientBuildNumber = 15 G 78 & clientI nstanceId=BFE94A4F-B245-45BF-9445-4A3DD396835C&dsid=1029823930&locale=pt-br&cruu id = 7 d 091310-0f49-4ff0-b86a-29663ff377d9, headers: body [object Object],: (omitted)

  Tuesday, February 2, 2016 17:46:31 GMT: ERROR: error recovery/starting. (500) response: {"requestUUID": "a4663688-cb28-43f6-00ff-04f22ae7bbf5", "errorReason": "Internal Server Error", "error code": 500}

  Can someone help me?

  I tried to disable the photos on my iphone app, turn back on, nothing works.

  The strange is that the problem is just on icloud.com. Sync on my ipad, iphone and windows app work perfectly. Does anyone have an idea? Its been going on for 20 days

• trying to browse some of the sites locally that we get the following error: HTTP error 500.19 - Internal Server Error

  HTTP 500.19 - internal error in the server error

  Hello

  We have Windows 2008 R2 Server, 64-Bit

  IIS version: 7.5.7600.16385

  We had several Web sites for our clients on this IIS server.

  While some of the hosted site work properly, but when you try to browse some of the sites locally, we get the following error:

  HTTP 500.19 error - internal error the requested page server is inaccessible because the configuration data of the page are not valid.

  Hello SGTPrasad

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/