EEM CLI commands do not run

Similar Questions

• Shell CMD commands do not run

  well this very annoying or maybe I am stupid and do something wrong, but... every time I goto "Start" then "run", type "cmd" to open the window of cmd and then try to type of destinations it does not work... For clarity, the text of the cmd window will have brackets on the left side of the line

  For example... This is what it looks like when the window opens:

  [Microsoft Windows XP [Version 5.1.2600]
  [Copyright (C) 1985-2001 Microsoft Corp.
  [
  [C:\Documents and Settings\Matt >]

  then leaves said: I want to go to the root C: / drive so I type in "C:\". ', it will give me the following message is displayed.

  [« C:\ ' is not recognized as an internal or external, order
  [operable program or batch file.]

  It keeps giving me this message whenever I type in whatever the destination I want to goto or record or other thing

  Any suggestions?

  Use the cd command to change directories on the current disc.  By default, the change is relative to the current directory:

  CD...                          (one level up)
  CD 'my documents' (the subfolder named My Documents )

  Add the /d option to perform absolute change:

  CD /d c:\                    (at the root of drive C :)

  You can put another disk by typing just the drive letter:

  d: (change of drive d :))

  Boulder computer Maven
  Most Microsoft Valuable Professional

• Captivate 7 - Captivate Javascript commands do not run.

  The joint command of javascript

  Alert ("message")

  works very well.

  Captivate specific orders not and stop any subsequent javascript execution.

  Alert ("Message1");

  var myStr = window.cpAPIInterface.getVariableValue ("myVariable");

  myStr = myStr.toUpperCase ();

  window.cpAPIInterface.setVariableValue ("$myvariable", myStr);

  Alert ("message2");

  The first alert runs, the second alert is not, and the Captivate variable not is changed to uppercase.

  More than the standard.js file required for orders of Captivate needs to operate?

  The common Interface of JS is not available in CP7.

  You need to execute different code for HTML5 and swf.

  SWF, you need to get the Captivate object:

  cpObj var = document.getElementById ('Captivate')

  Then use the external Interface:

  cpObj.cpEIGetValue ('m_VarHandle ' + yourVariable)

  HTML5 is:

  cp.vm.getVariableValue (yourVariable)

• Darwin.CLI: most of the cli commands is not available

  Most of the command-line to point 6.1 does not for example to vcloud led application 6.1

  
  list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn more about this command)
  

  Spring > create cloud tunnel

  Command "create cloud-tunnel" was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring > cliversion
  vCloud Automation Center Application Services CLI 6.1.0 BUILD - 2064245
  Copyright (c) 2011-2014 VMwareInc. All rights reserved. This product is protected by the U.S.
  and the international laws of copyright and intellectual property.
  VMware products are covered by one or more patents listed in the http://www.VMware.com/go/patents
  Spring > display user

  
  "View user" command was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring > list-cloud-tunnels
  'List-cloud-tunnels' command was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring >

  Thanks for your help, you are right, but I didn't know how to do it. the documentation could be updated to reflect the it. Here's how I work.

  Login serverUrl- https://**.**.**.**:8443/darwin - [email protected] - password username *-tenantId tennantnamehere

  Thank you

  Niasse

• the command "hp printer assistant" in the software officejet 7500 is not running.

  When I try to run the Officejet 7500 software, the "HP printer Assistant" command does not run when I click or double-click it.  The other 3 commands run normally. This has happened the first or second time I tried to use the software to check ink levels.  I tried ninstalling and reinstall the software without success.

  The system is Pavilion g6-1A30US laptop, Windows 7 Home Premium.

  Hello

  Uninstall the software by clicking Start > programs > HP > HP Officejet 7500 > Uninstall.

  Download and install the latest version of the software below:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-109374-2&cc=us&DLC=en&LC=en&OS=4062&product=4083652&sw_lang=

  I think you should see options like scanning and fax options now.

  Shlomi

• For AP in FlexConnect CLI commands

  Hello world

  Just as the title says, as much as I Googled it I can't seem to find what are the CLI for AP in FlexConnect commands

  I know that we can telnet/ssh to the AP in flexConnect, but what are the possible commands that we run on the AP?
  Hope someone can help :D

  Thank you!

  This can be useful if you do not see it

  http://www.Cisco.com/en/us/docs/wireless/controller/7.4/command/reference/Flexconnect/flexconnectcr74.PDF

  HTH

  Rasika

  Pls note all useful responses *.

• Cisco ACS 3.1 and Logging of Nortel Passport CLI commands

  Good afternoon

  We try to log commands CLI Cisco ACS version 3.1 of Nortel Passport 8600. The version of the code that runs on the Passport does not support Ganymede +.

  Passports authenticate OK but don't sign any order information. I "think" the problem is maybe that the VSA Radius of Nortel for cli-commands-attribute, 195, is not collected by ACS.

  Does anyone know how I would go to get this added to the existing list of Radius (Nortel) VSA?

  Thank you very much

  Kind regards

  Flett.

  Foisy,

  You must add the attribute Nortel 193-195 to activate the posting of the order.

  Unfortunately you can't download on code 3.x, you will need to upgrade acs to the 4.x code.

  Kind regards

  ~ JG

  Note the useful messages

• 1131AG CLI commands

  I try to reset an ap on its values. I can't enter in the cli, but the "Clear wr" command is not available. How to clear the config on this access point?

  Also, I have configured initially access point to connect to wlc 4400, which worked great, but when you try to reconfigure the IP address of the CLI is not an option, because the command is disabled.

  How to display the running-config on the ap?

  This access point can be used as a standalone ap?

  Thanks in advance.

  Hi Carlos,

  Once that the AP has been converted to LWAPP (to work with the WLC) the ability to use the CLI interface is mainly lost. Here is the method to return to autonomous (so it can be used as stand alone);

  Returning to standalone Access Point

  It is possible to return to a point of access compatible LWAPP Cisco Aironet return to autonomous mode. Please refer to Cisco Aironet Lightweight mode standalone update Access Points to get detailed instructions on the returning to stand-alone mode. Use this URL

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  Convert a standalone Lightweight Access Point

  You can convert an access point of the mode light return to autonomous mode by loading a Cisco IOS version that supports stand-alone mode (Cisco IOS release 12.3 (7) JA or earlier version). If the access point is associated with a controller, you can use the controller to load the version of Cisco IOS. If the access point is not associated with a controller, you can load the version of Cisco IOS using TFTP.

  By using a TFTP server to revert to a previous version

  Follow these steps to return mode LWAPP stand-alone mode by loading a version of Cisco IOS using a TFTP server:

  --------------------------------------------------------------------------------

  Step 1 the IP address of the computer on which the server software runs TFTP should range from 10.0.0.2 to 10.0.0.30.

  Step 2 make sure the PC contains the file access point (for example, c1200-k9w7 - tar.122 - 15.JA.tar for a 1200 Series access point) in the TFTP server folder and the TFTP server is activated.

  Step 3 Rename the access point image file in the folder of the TFTP server c1200-k9w7 - tar.default for a series of 1200 point, c1130-k9w7 - tar.default of access for a series of 1130 access point and c1240-k9w7 - tar.default for a series of 1240 access point.

  Step 4 connect the PC to the access point using an Ethernet category 5 cable (CAT5).

  Step 5 disconnect the power to the access point.

  Step 6 push the MODE button and hold the button while you reconnect power to the access point.

  Step 7 hold the MODE button until the status of the LED turns red (approximately 20 to 30 seconds), then release.

  Step 8 wait until restarting access point, as indicated by the LEDs become green followed the status LED flashes green.

  Step 9 after the access point reboots, reconfigure using the GUI or the CLI.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp161272

  Here's the info CLI;

  Manually configure the controller information using the CLI of the Access Point

  This doc.

  http://www.Cisco.com/en/us/products/ps6521/products_installation_guide_chapter09186a008079b730.html#wp1082991

  I hope this helps!

  Rob

  Remember messages useful rate...

• Why is there no warning that firefox 4 does not run on a powermac? where can I find firefox 3.6 to reinstall?

  Then I answered a command prompt (by running Firefox 3.6 on my powermac) to download and install Firefox 4. Great! Well, install and replace 3.6 went well, but trying to open Firefox 4 there is a message saying that the material he has not supported. OK fine. But now I don't have firefox. Where can I find 3.6.16 to install?

  The beta of Firefox 4 a few months ago DID run, so it's curious.

  Thank you

  Don

  Firefox 4 requires at least OS X 10.5 and an Intel Mac.

  • http://www.Mozilla.com/Firefox/4.0/system-requirements/

  For Mac OS X 10.4.11 or Mac OS X 10.5.8, you can watch:

  • http://www.floodgap.com/software/tenfourfox/

  Firefox 3.6.x can be found here:

  • http://www.Mozilla.com/en-us/Firefox/all-older.html

• HP Pavilion Notebook PC g7 - The Audio Service is not running

  I don't have sound on my PC for a few weeks, but when I use a headset it is solid. Today, I saw a message saying that the Audio Service is not running. What is going on?

  HP Pavilion Notebook PC g7

  #ABA product number A6Z29UA

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp55001-55500/sp55026.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  Chipset Driver - Windows 7.

  Once this done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• Firewall is corrupt? Does not connect to the internet. Get the message "the firewall settings window cannot be displayed because the associated service is not running".

  Original title: wall of fire is corrupt? Does not connect to internet

  The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.

  Hello

  What happens if you disable the firewall?

  Run the checker (sfc) system files on the computer.

  SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.

  If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.

  c. at the command prompt, type the following line and press ENTER:

  sfc/scannow

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  The following article might be useful:
  After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
  http://support.Microsoft.com/kb/892350

• print spooler is not running: xp sp3 x 86

  I uninstalled HP printer to install a new HP printer: print spooler does not work anymore, and the new printer is not installed.
  FixIt says print spooler does not start: it can fix it.

  Several files are missing:
  Ntprint.dll
  Spoolsv.exe

  Files are present:
  Winspool.drv
  printui.dll

  I ran sfc/scannow
  SFC scanned my files/CD - no report, I go back to the cmd prompt. Spooler still does not run, missing files not replaced.

  I found a lot of suggestions, none of which are the same, each with some replies saying it works & others say that the solution does not work.

  Can I copy & paste the missing files from my XP CD?
  Can someone suggest a better approach?

  Thanks in advance,
  Cathie

  Try to use the search function and specify "Search system folders" and "search for the hidden files and folders".

  Research of dllcache

  You should also try to search for your missing files.  KB234729 gave you the spoolsv.exe back?

  Files ending with a underscore should be expanded from a command prompt window by using the Expand command.  Open a command prompt window (start > run > cmd > OK) and type expand /? for the list of parameters.

  Basically, the command would be:

  expand C:\i386\spoolsv.ex_ C:\windows\system32\spoolsv.exe

• Removed from Garmin using MSconfig and now I can't print. The print spooler is not running

  I wanted to speed up my computer and remove an item off my msconfig.  Now I can't print. missing spooler.  What should I do?  I tried dating back to some time earlier, but all previous changes are missing

  Operation could not be performed.  The print spooler is not running

  the question I wanted to delete was for Garmin

  don101947

  Hello

  I don't know if you have already solved the problem of the other answer, but here's something you can try if your not confident using the command line.

  Go to [start],-> [Control Panel]-> [administrative tools]-> [Services]

  Depending on if your running XP, Vista or 7 you can have 2 tabs at the bottom of the window you see.

  Select [Standard] if its not already selected. If you already have a large list, skip this step.

  Scroll down and find the print spooler. Double click it, and then set the "Startup type" to [Auto]

  then click [OK] and then make a right click again print spooler and select [start]

• Under Vista 32-bit, windows update will not run.

  1. If an attempt is made to run Windows update, it displays the message that it cannot work because the windows update service is not running and the computer must be restarted.  Reboot has not fixed the problem.  Checking in MSCONFIG shows that the windows update service is running.  Tried the ap fix - it without success. Ideas?

  Hello

  Thank you for contacting Microsoft Community.

  You can go to start-> type services.msc-> press on enter. In windows, go to Windows Update. Double click on it. Make sure it is running and the startup type is set to automatic. Make sure that the following services are also running:

  Remote procedure call (RPC)

  DCOM Server process Launcher

  RPC end point mapper

  Make sure the service above are running and that their startup type is set to automatic.

  Now, reboot your PC and then try again.

  If Windows Update still fails, try this:

  Click Start-> type-> right click cmd.exe and click Run as administrator.

  Then, run the following commands:

  CD %windir%\System32

  net stop wuauserv

  Ren c:\Windows\SoftwareDistribution softwaredistribution.old

  net start wuauserv

  Response if the issue is not resolved.

• The command could not be executed

  Some e-mail attachments will open and the message, "the command cannot be run."  It happened this week when Microsoft downloaded several updates.  Coincidence or what?

  I finally took this chance by myself and it worked.  Also, I hid IE8 so that it would not be an automatic update ever.  Unfortunately, Microsoft blew it on 8