Embedded Vimeo Video fills the entire width

Similar Questions

• How to fill the entire width of the screen on a phone

  Hello

  I am currently doing a small mobile page with Edge. I defined the project to 640px width to fit perfectly on the screen of the iphone. However if re-directed the page in Safari there are always a few pixels on the right side that are white. Optimally the screen should be default fillesd (also if it is used by a phone with an another width in pixels). I tried to work with the persentages to get a reactivity going on but it doesn't seem to work. The band of white pixels don't disappear.

  Can someone provide me with a solution?

  See you soon!

  Try to set a meta tag for the page HTML of your project before the

• navigation bar won't fill the entire width of the page

  Hello!

  Everything takes this page uniformly l to r except the navigation bar. If I change the width of each area of 146 to 147, it ends up being too big and the last box falls below. I tried to make 100% and makes each all width box. What I can do, so there is no space on the right? Thank you very much!

  Here is the current link on the site:

  http://kobwebsecure.com/elitedesigner/

  Have you tried adding padding 1px on the selector css below (as illustrated, second item in the list)

  UL. MenuBarHorizontal li
  {
  margin: 0;
  padding: 1px 0;
  list-style-type: none;
  do-size: 100%;
  position: relative;
  text-align: left;
  cursor: pointer;
  Width: 146px;
  float: left;
  border: thin solid #fff;
  background-color: #333;
  }

• I want an image to fill the entire screen without margins

  I want an image to fill the entire screen without margins, much like this one, http://waltoninsurancegroup.com/contact , but I want to keep my margin for everything else the same. can someone help me with this? dreamweaver CC

  Don't forget to turn off the margin of browser default to yourtag with the css...

  {body

  margin: 0;

  }

  If you do not do this, any width 100% image, you add stops a good 20 pixels of up, down, left, right

• In CC Dramweaver Adobe how to make my Web page fill the entire window?

  In Adobe Dreamweaver CC how to make my Web page fill the entire window?

  A width of 100% CSS.

  
  

  Body {width: 100 %}}

  Nancy O.

• How to make a video fill the all reactive container / browser window?

  I would like to make the video fill the whole window (or containers) zooming in case of need, so there is no mailbox...

  My problem is that it only works with the width of the video. Any help would be appreciated.

  This is the code I use:

  var vid = sym.$("vid_1_holder");

  VID.html ("< video width =" 100% "height ="auto"src =" video/1.mp4"type =" video/mp4 "autoplay ="autoplay"loop =" loop"> < / video > ');

  Thanks in advance

  found the solution:

  var vid = sym.$("vid_1_holder");

  VID.html ("");

• When I do a bad screen images balloon race to fill the entire screen. How can I find them to normal?

  I don't know what to do so that the stroke of the image upwards. Do not fill the entire screen, they fill the screen to normal size. This has happened on two sites. How can I get them back to normal.

  Is it on Android or desktop? On Android, try double-clicking to zoom out. On the desktop, to reset the zoom, try Ctrl + 0 (it is a zero).

• Home page fills the entire screen

  When I connect to internet, my homepage (Google) fills the entire screen.  The tabs at the top will appear briefly, then disappear, the taskbar at the bottom is not there, so there is no "Start" button I can click on the closure of the computer; I have to cut out food.  Is there a way can I fix?

  A chrome switched mode "full screen" for some reason any?

  Try the 11 key function toggle to see if this switches between full and glass screens.

  for example, press the button to see if that helps.

  If this does not work, try to press on together to change the selected program.

• LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  LR fills the entire screen. How can I reduce this so I can control the size or reduce it with the help of the control-M?

  Hi DP,.

  Are full-screen mode in Lightroom, you can it exist by pressing SHIFT + F.

  Kind regards

  Mohit

• Beginner - how to make the picture to fill the entire screen

  I have two 640 x 480 photos.  It fills the entire screen, and the other is not. What causes this? Photo shop can be used to make the second fill the screen?

  The image is 653 pixels wide by 345 pixels high. You would have to know the resolutions of your phone and tablet to get this picture fits correctly as background, then use command size of the Image in Photoshop to resize accordingly.

  Note that the increase in the size of the image will explode just imperfections, such as digital compression / artifacts that happens in an image to JPEG file. (The famous "macroblocking.") It would be better if you can get your hands on a copy uncompressed this image, if possible, for the purpose of resizing. (BMP and RAW formats are not compressed, for example.)

• How can I get a box or an image to span the entire width of the browser

  Hello

  I have had varied success get boxes of color etc to span the entire width of the browser, it seems that sometimes it works and other times it does not work

  For example, it seems that I have the header and box grey able to cover, but the footer and the image of "Group of McConaghy" are not

  http://mcconaghyyachts.BusinessCatalyst.com/McConaghy-group.html

  It is very frustrating - suggestions

  Thank you

  Ellen

  Hi Ellen,.

  In order to extend over a rectangle or a text block on the entire width of the browser, you will need to stretch the element on both sides until a tooltill shows 100% width.

  Please refer to this screenshot:- http://prntscr.com/4lpmc3

  Kind regards

  Rohit Nair

• Embeded html slows down the entire site

  Hello

  I'm building a gallery video cutom for self-hosted videocontent. For this purpose I use a widget of composition, fill the trigger with some animated text and circles, incorporate an html5 player and finally put it in the area target.

  General, it works fine, but adding more than five instances/target html embedet leads to horrible long time to load. (this may take some minutes!)

  Here's an example where I simply copy the code for the html5 player: I think it is best to start watching this, so that you get an impression how the site should work. (you must scroll down to the video Viewer. IM using a scrolling wink widget, but it does not work correctly until the site is fully charged)

  http://www.jehleproduktion.de/hans3

  Here's the site with embeded html code.

  http://www.jehleproduktion.de/hans2

  Here's the code for html5 embedded player:

  < video id = "MY_VIDEO_1" class = "video-js VJ-skin by default" - speed control

  " preload ="auto"width ="960"height ="540"poster = ' ' http://www.jehleproduktion.de/filme/Weak.jpg '

  data-setup = "{}" >

  " < source src = ' http://www.jehleproduktion.de/Filme/weak.MP4 "type =" video/mp4"> "

  " < source src = ' http://www.jehleproduktion.de/Filme/weak.WEBM "type =" video/webm"> "

  " < class p 'vjs-No.-js' = > to view this video please enable JavaScript and upgrade to a web browser that < a href =" http://VideoJS.com/HTML5-video-support/ "target ="_blank"> supports HTML5 video < /a > < /p > "

  < / video >

  What can I do?

  THX

  Johannes

  Adjust the preload = 'none' rather than 'auto '.

  Auto tells the browser to immediately begin to download the full video. If do you and have a dozen videos on the ready page auto that will try your browser to download all, regardless of whether or not you look at one of them.

  If you have several videos that are more short loops, you're insanely better to use a service such as Vimeo or YouTube to host your video. These services provide a lot of value to match the capabilities of the site visitor network connection performance device and that you do not get when self-hosting.

• DV5Z w/HDMI does not fill the entire screen

  I have a DV5Z with installed Blu - ray player. When I connect the Dv5z for my Panasonice 42 in plasma 720 p with the HDMI cable, the entire screen is not used in full picture format. There is a border of 1 inch around top, bottom, left and right.  My DV5Z has ATI HD 3200 graphics card and I do not understand where I need to adjust it so that it works ok. I already had a Dv5T with Intel 4500 and it worked fine, (in fact he filled a little too much about "1/4 of the image has been off the screen) but not the DV5z and I don't want to watch some blu ray movies with 1inch border around the screen. Where are the settings for me to adjust so that I can watch movies under the eyes?

  I adjusted the display settings, and it did not work. What could be the problem I need to adjust?

  I also adjusted the aspect of the TV and H-fill is not anywhere close and zoom isn't closed and 4; 3, that's not what I want to use.

  Any help is appreciated.

  Try using the ATI Catalyst software.  You should see an option for HDTV in the list on the left in the Advanced view.  It has a few decent explanations on how to use it to configure your TV.  I do not have my dv5z before me right now so I can't be more specific.  If you need more details, let me know, I got exactly the same problem and got it working.

• Define an ImageView to fill the entire screen

  Hi veveryone,

  I need to have the ImageView stretch to fill the screen. How can I go about it?

  Should I get the height and width of the screen? If so, how?

  Thank you

  The code below does not work, it only centers the image

   Page *root = new Page;
  
      Container *container=new Container();
      container->setLayout(DockLayout::create());
      container->setBottomPadding(0);
      container->setLeftPadding(0);
      container->setTopPadding(0);
      container->setRightPadding(0);
  
      container->setBottomMargin(0);
      container->setLeftMargin(0);
      container->setTopMargin(0);
      container->setRightMargin (0);
  
      container->setParent(root);
  
      ImageView* img= ImageView::create("asset:///images/image.png");
      img->setHorizontalAlignment(HorizontalAlignment::Center);
      img->setVerticalAlignment(VerticalAlignment::Center);
      img->setScalingMethod(ScalingMethod::AspectFill);
  
      container->add(offImageView);
  
      root->setContent(container);
  

  Try this

   Page *root = new Page;
  
          Container *container=new Container();
          container->setLayout(DockLayout::create());
          container->setBottomMargin(0);
          container->setLeftMargin(0);
          container->setTopMargin(0);
          container->setRightMargin (0);
  
          container->setParent(root);
  
          ImageView* offImageView= ImageView::create("asset:///images/image.jpg");
          offImageView->setLayoutProperties(DockLayoutProperties::create().horizontal(HorizontalAlignment::Fill).vertical(VerticalAlignment::Fill));
          offImageView->setScalingMethod(ScalingMethod::AspectFill);
  
          container->add(offImageView);
  
          root->setContent(container);
  
      Application::setScene(root);
  

• How to display a graphic on the entire width of the browser window?

  I would like to float a chart that I place on the page through the page so that it fills the width of the browser and the page.

  Hi CandaceX,

  Please refer to this post on the forum: http://forums.adobe.com/message/5294822#5294822

  Kind regards

  Aish