EOP printer should not be default, possible?
Hello
We have activated EOP printer for the userers who access it via the Web portal remotely or at home.
EOP printer works fine, when they connect to the default printer home House is also a default printer in the vdi.
but when the user returns to the office a login to the computer thinclient there is any printer by default, but not the one he loves.
We have therefore no logon script to set the printer def. the user makes by himself. And a logon script would not work if it at home and at the office.
So I'm looking for the ability to use the eop printers, printers must be connected, but not as default printer.
is this possible? Otherwise > Feature Request
Thank you
Marc
Hi Marc,
I use the following settings on my VDI and it works perfectly.
This always creates all printers, but it does not change which printer is the default.
Thank you, Andrew.
Tags: Dell Tech
Similar Questions
-
the printer that is displayed when I hit print is not my default printer
I can print from my documents or desktop but when I open firefox and try printing it opens a print with a fax like my printer window. I can hit the arrow down and see my printer but it does not allow me to select. My default is the right printer
Firefox has its "own ideas. about who is the default printer Firefox uses last used as the "default" printer in Firefox.
Simply select a different printer and when you print from this printer, Firefox uses this 'default' printer until you select and use another printer in Firefox.
If you cannot select the printer you want in Firefox, try to do the reset of the printer as described here:
https://support.Mozilla.org/en-us/KB/fix-printing-problems-Firefox#w_reset-all-Firefox-printer-settings -
HP PSC 1410 printer does not not with WIN8.
New Gateway PC 64 bit, bought 11/2012, printer worked very well until I uninstalled and reinstalled WIN 8, then hurt. Downloaded and installed the drivers according to the directives of the HP. Printer has worked for only 1 print, then began to leave the impression that print jobs, would not print and would not delete. First time it happened, I could go to the Panel, devices and printers, and sometimes I could erase Quebec, but not always. Using Print and Scan doctor, considers HP printer was not a default printer and it corrected that. I had not been able to choose by default in Control Panel, but print and scan Doc could choose. Another problem with WIN 8 after reinstalling, it would be the list of available wireless connections, but that has been resolved by going to Configuration and choose "default to load. On the HP website, HP said they work with WIN 8 to solve the problems with the new drivers, but so far, WIN 8 seems to cause problems. I realize that print jobs stuck in Quebec, can be a symptom of weak communication between PC and printer, but it worked very well up to WIN 8.
If you do not already see this:
http://WWW8.HP.com/us/en/support-drivers.html and follow the Instructions and download and install all the drivers/software for windows 8. Hope this helps and if you need another post to help and we will be happy to help you.
The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it's employees, or any other Member of this forum
-
Windows Vista - default printer does not have a default
From: Freddie Kang
I have implemented several printers and have an assigned as the "default" printer network printer I noticed that this status of 'default' for this printer does not remain so after I stop and restart. It seems to default to the fax printer. I then have to reset the printer selected as 'default' to be able to print. This not happens whenever I stop - sometimes, the default printer is as default.
Someone at - it similar experiences? Solution to the problem?
Thank you.
Best regards, S.F. Kang
From: Cari (MS - MVP)
It will default to the first he concluded after opening session, so in your case, I think the connection to the network is taken longer, that so he finds the fax first.
-CARI (MS - MVP)
Technologies of Windows - Printing & Imaging
http://www.coribright.com/Windows
Another response of the community of Windows Vista discussion groups
-
Printer does not print in PDF format. Does not set the printer as the default printer.
I have windows vista 32 bit and quickbooks pro, at first we could not open quickbooks, called and had to reinstall, then the printer will print not in quickbooks. The printer does not green check mark display when you set as default printer. We have uninstalled and reinstalled the printer it will print but not in pdf. Also, there is a problem with updates, error 2 codes are coming and will not be installed, 646 (update of microsoft office) and 643 (update net framework)
Hi Bobob23,
Try the suggestions in the article below.
http://kb2.Adobe.com/CPS/316/316508.htmlREFERENCE:
Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates
Bindu R - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
all of a sudden, my HP C4795 is not the default printer?
About a week ago, something struck my pc and meanwhile my facebook and any library, electronic mail has been crushed. I'll be back all email abd f/b, but now I can't print or scan from the pc on my HP Photosmart C4795. I played several times installation disk and said there is a problem and that my printer is not installed and is not the default printer, nor can they install a driver. It worked great until this. I'm out of options, thank you
1. unplug the printer and uninstall the software/driver.
2. go in:
http://h10025.www1.HP.com/ewfrf/WC/softwareCategory?Product=3940574&LC=en&CC=US&DLC=
and download/install the latest full features software and drivers (installation instructions are here).
It is customary not to connect the printer to the computer until the driver/software is finished or the driver/software installation process you ordered.
-
Unable to print, printer is not set by default
Original title: printer
I can't print anything, because the printer is not checked by default. Single note send is checked
as a default value. How can I get the set of deskjet 4500 as a default?
Hello Lucille Jackson,.
1 did you change on your computer before the show?
2. If it works well before?
3. you receive an error message?
Method 1:
Check out the following link to find out how to set a default printer in Windows 7.
Change your default printer in Windows 7
Method 2:
Perform the troubleshooting steps from the following link for printing problems.
-
Lenovo thinkpad T410s, stock, windows 7 64, ms office 2007, adobe reader, all day
Cannot print to a PictBridge compatible printer (including print them as pdf, xps, etc.) of powerpoint, excel and adobe (at least). This is what happens when I try to print:
-excel, I get the error "current printer is unavailable". When I say ok, it appears a box displays the available printers (updated from the printer list and shows new printers if I install, removes those I removed/uninstalled), but I chose one, say ok and it just goes back to the same error
-powerpoint: I get the error "no printer is installed.
-Word: printing, but it does not show a default printer (drop initially empty). the list of printers (once that you pull-down) remains up-to-date
-adobe reader software: poster old printer printer list and the default is not updated. When I select and press on print, it gives error ('no page selected')I have read that sometimes happens when there is no default printer selected. It's true. I select a default printer, but it doesn't seem to stick. When I run the troubleshooter to fix - it, he confirmed that he could not set default printer (and then gave me some unnecessary insulting suggestions, like going to the site of the printer manufacturer, or fix - it)
I uninstalled reinstalled all printer drivers except the default virtual printers (printing of the document, ms fax, pdf etc.). I checked that the spooler is running (in services)
What can I do to recover the printing feature?
It seems as if it was a corrupt user profile. In the new user profile things seem to work. Thank you. Still a lot of work just to work in the new profile, but not quite as bad as from scratch
-
Plans of work in PS CC can be also for print design? If not, is it possible to use photoshop with similar functionality?
As they don't understand the area of cropping and Bleedbox parameters so far that they are, in my opinion, useless in regards to printing.
If you try to make prepress and correct page layout work in Photoshop, you can change to use the right tools for the task as Indesign.
-
I have Photoshop elements 13. I got a new printer Epson XP-960. When I tried to print a photo I received a message: default printer could not be opened. What now?
kareng44985000 wrote:
I have Photoshop elements 13. I got a new printer Epson XP-960. When I tried to print a photo I received a message: default printer could not be opened. What now?
This is a known bug. Here's a tech note:
-
I need to create a fillable pdf form which allows to print but not save. Is this possible?
Is not possible.
-
Printing of multiple copies and the order should not be reunited
Hello
I have a requirement to print multiple copies (2) a pdf in report editor BI. And order print copies should not be reunited.
Collating:
Copy-1: Page 1, 2, 3
2-copy: Page 1, 2, 3
Do not collect: (I need the output in this format)
Page 1, page 1
Page 2, page 2
Page 3 page 3
How can we get multiple copies, and how we can control the order of output?
Pointers would be most useful.
Thanks in advance,
Kind regards
MukthiCan you send me the files
-
What happens if my default printer is not the printer used for printing from LR?
Hello
I use an Epson Stylus Pro 3800 for photographic printing, but is not the default printer on my system (and it won't). How I setup LR do use the default 3800? I tried a "default printer" option in the preferences but could not find it. Or have I missed something? I can't imagine there is no way to solve this problem.
Thanks in advance.
--
Patrick
Are you aware that you can save the printer model in print templates with page size, printer profile, etc.? Once the printer model is saved in the model, you must only select the model FRO Lightroom to automatically choose the correct printer.
The steps are:
1. start Lightroom
2 go to the print module
3. create a new print template and give it a name meaningful (for example model of printer - A4 landscape)
4. click on Page layout (it would be more logical if he actually read the Print Setup)
5. choose the model of the printer (for example Epson 3800) in list menu dropdown name printer - paper set size and orientation
6. click on the properties button and configure the driver Epson as required (for example Page Size, the printer settings, etc.), and then click OK twice to close the properties of the printer and the print dialog settings
7. right click on the model that you created in step 3 above
8. choose update with current settings from the popup menu
If you define profiles of specific printer that they can also be saved to the model
-
Report should not display all data by default.
Friends,
Can someone tell me how can I restrict default data view report.
My requirment is that the user should not display data until he provides the value of fast page level.
Thanks in advance!
Kind regards
Cecilia.Hello
Define a default value in the prompt of dash in the drop default value specific select list
in the specific value gives the value which is not matching your criteriahope this helps you
Concerning
NGO
-
HP Photosmart B110 all-in-one: wireless printing is not possible
Hello
I have my printer connected to my desktop via USB and other computers connect using my wireless network. Sometimes printing from one of the other computers works, sometimes it doesn't.
If printing does not work I have check the printer and it is connected to the correct network and online. I check the IP address and all withdrew. The computer that I use to print is connected to the same network and sees the printer as being online.
If I send a document to print, it is added to the queue, and then sits there. With the status of"impression". But nothing happens...
Today, I tried to delete the printer and add it again. Still no luck. What is going on?
Hi @Plantje1978,
Welcome to the HP Forums!
I understand that you can not print with your HP Photosmart B110, on 10 of Windows wireless. I'm happy to discuss this issue for you!
Please, try the following steps:
Step 1: Check if the printer is paused or offline
Maybe you are looking for
-
After using IMAQ RT Video Out, how to return to the string of rt debugging output?
After having used the video on VI IMAQ RT, the screen image as expected. Then, I want to return to the display console where I can see the RT Debug channels and the processor. Is this possible?
-
Pavilion 15-n249sl driver for windows7 32 bit
Hi all I'm looking for windows7 32 bit drivers for Pavilion 15-n249sl (G1N60EA), but I found only for 64-bit: can you help me? Thanks in advance. Vale
-
Hi all I'm doing a silent installation off vWorkspace 8.01 with Microsoft SCCM. Silent installation of vWorkspace is not a problem, but when I try to do a silent install of the mandatory patches with the options/s/v/qn it will not be installed. You c
-
I can remove it from running at startup?
Original title: I HAVE a LOT OF THINGS THAT RUN at STARTUP... HOW can I TELL WHAT ONES I REALLY NEED, I CAN REMOVE? COMPUTER LAPTOP AND DESKTOP SEEM REAL SLOW LATELY... WHAT BELL?
-
ColdFusion 2016 invoke webservice returns an error - works fine on CF 9
So I try to migrate a site of CF 9 at CF 2016 after a few issues I ran into something I can't understand. Basically, I call the web service like this< cfinvokeWebService = "#APPLICATION. SiteURL#/cfapi/webservices/Orders.cfc?wsdl ".method = "QueryOrd