error 'Cannot convert the type value' regarding
Here's the scenario:
There are partial data in the ATG user related tables.
1. I mean like the tester deleted the record for one of the user in the dps_contact_info table.
2 Tester invalidates the cache in the profile repository
3. try to connect with the same username and password.
4 get the error in the newspapers ' Can' secret value for type "and also because the exception message 'cannot change existing identifiers. This error message is seen for the first time when the user after deleting the record connections. When we logout and login back again once there mistakes.
5. but the record gets inserted into the dps-contact_info table after connecting successfully.
Here is my definition of the user for the custom address table
< name point-descriptor = "defaultContactInfo" >
< table name = "upt_user_dflt_adr" type = "primary" id-column-names = "user_id, type_cd, opco_id" >
< property name = name of column "address" = 'adr_id' element type = 'contactInfo' category = 'general' cascade = "insert, update, delete" / >
< property name = "user" column-name = data type 'user_id' = 'chain' category = 'general' / >
< property name = column name data type 'type' = 'type_cd"="enumerated"category ="general"default ="HOME">
< attribute name = "useCodeForValue" value = "true" / >
< option value = "HOME" code = "0" / >
< option value = "BILLING" code = "1" / >
< option value = "DELIVERY" code = "2" / >
< / property >
< property name = "opco" column-name = data type 'opco_id' = 'listed' category 'general' = >
< attribute name = "useCodeForValue" value = "true" / >
< option value = "STSH" code = "0" / >
< option value = "ELSA" code = "1" / >
< option value = "GNTC" code = "2" / >
< option value = "MRTN" code = "3" / >
< option value = "MRTR" code = "4" / >
< / property >
< /table >
< / descriptor point >
I am not able to solve this problem. Please let me know what needs to be done to avoid this error ' can' secret value for type. Thanks for your help.
Finally, with some out of debugging the code in the box, I found the real problem.
Here the solution useCodeForValue is set to false and it solves the problem of conversion for me.
Tags: Oracle Applications
Similar Questions
-
Cannot convert the value &; quot; down &; quot; a Boolean value
I am trying to establish why this example gives me an error, it is intended to demonstrate the ability to return one data type other than a Boolean value to a UDF but doesn´t seems to work. Why is this? I'm using cfmx7 who shouldn´t of importance that the UDF are cf5 + thank you for any response
Hydrowizard wrote:
> Thanks for the reply Phil, sorry I forgot to put the error message is
> "unable to convert the"inferior"to a Boolean value. The return is partly false in
> the code I got rid of him now, I thought that it was always
> Thank you for this comment.
>Have your resolved your error?
If not, or for others in your so first paragraph:
You not compare function for anything so try to SEE
convert the returned value "below" in this case true or false.
that is a Boolean and failing value. If she tells you that it cannot
convert "down" to a Boolean.Now, it would give him no problem.
But then I don't know what is really stable.
-
I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.
No one can tell you anything without the info adequate system or other technical details, including the exact error message.
Mylenium
-
How to print after the Error Msg: cannot convert the postscript file
"Maverick", we installed our MacBook Pro and our printer is a HP 8600. We have failed to get our Adobe Acrobat Professional 8 to print our PDF files. Instead, we got the error msg: impression: cannot convert the postscript file. We have used this application for years without any problem. How do we solve this problem so that our request will BE "convert postscript file" or do we not have to spend several hundred dollars to upgrade?
I think that we have solved the problem. Instead of looking for the solution via Adobe, we went to our info from the printer online, which was the HP OfficeJet 8600. We found the printer drivers special for our system of operating newly installed Maverick for our MacBook Pro. After having downloaded and installed the new drivers by fashion, we tested print a pdf document, and it was printed without any problems.
-
DW cannot convert the <; object >; tag created with swfObject 2
I have a Flash video on an "integrated" static html page using the swfObject method 2. When I open the page in DW CS3 I get this error message:
"This page contains < object > tags that may not work properly in the most recent versions of Internet Explorer. DM cannot convert the < object > tag. »
Page plays the video the two local system on the server.
this test page is here: http://www.rjdutton.com/about_movSWF2.html
Relevant source code is:
--> < object classid =... etc and
--> < object type =
Since this is the only code on the test page that refers to an object tag.
The on-board Flash I have on the website (home page and the who we are page) now are incorporated using < embed > via Flash CS3 (AC_Run active content), but this method does not validate. the swfObject method 2 valid.
I'm working on a Mac. Could someone check the page on the victory of the IE and see if the video is running?
Can I ignore the message 'error' of Dreamweaver?
Thanks - Susan
I think that you will have no problem ignoring the message.
Ken Ford
Adobe Community Expert - Dreamweaver/ColdFusion
Adobe Certified Expert - Dreamweaver CS3
Adobe Certified Expert - ColdFusion 8
Fordwebs, LLC
http://www.fordwebs.com
http://www.cfnoob.com -
Hello
Excuse my approach... but I can't... I haven't used this during some time... and I took this to an old APP (working!)
the error is:
Cannot convert * of type class oracle.jbo.uicli.binding.JUFormBinding to the oracle.adf.model.BindingContainer interface
and the code is like this
I watched JUFormBinding and as I see the hierarchy isDCBindingContainer dc = (DCBindingContainer)((fc.getApplication().evaluateExpressionGet(fc,"#{bindings}", BindingContainer.class));
java.lang.Object
byjava.util.AbstractMap extended
byoracle.jbo.common.JboAbstractMap extended
byoracle.adf.model.binding.DCExecutableBinding extended
byoracle.adf.model.binding.DCBindingContainer extended
byoracle.jbo.uicli.binding.JUFormBinding extended
so DCBindingContainer is great to JUFormBinding
Thank you
Pop FlorinHello
and it is easier that it is
BindingContext bctx = BindingContext.getCurrent(); BindingContainer bindings = bctx.getCurrentBindingsEntry();
Frank
-
Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?
Hi woodysk
Greetings.
- You will need to read and write permissions on the Adobe folders manually.
Please follow the steps below:
- Right-click on the icon in the Finder and select the 'Go - To' folder option.
- You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
- ~/Library
- Then go to the Application Support > Adobe.
- Right-click on the Adobe folder, then select the GetInfo.
- Expand the section sharing & permissions.
- Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
- Please click on '+' symbol, it will open the list of user accounts.
- Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
- Click the gear icon and select apply to closed. Close the dialog box for information.
- Then launch Lightroom application and check.
Let me know if still face you any issue.
Concerning
Rohit
-
Error: Please enter the date value in the correct format DD-MON-RRRR
Hi all
First of all, I am 100% not learning financial oracle no technical information. I'm trying to run a report: - the calendar does not appear in order for me to choose the date - not to mention that when I enter the date IE 10/09/2010 or on 09/10/2010 the system gives me this error "" error: Please enter the date value in the correct format DD-MON-RRRR ".
Please help me to solve this.
Thank youPlease enter date in format 12 October 2010.
Kind regards
http://www.oraerp.com -
Convert the column values into buckets
Hello
Please help me to convert the column values into buckets.
I have the values of the columns in the following way.
Age of Orderdate * 9 10 12 14 15 18 19 20 21 22 26 27 28 29 33 34 40 45 * and so on
But the requirement is the column values should be displayed in form
Age by order date * 15 1 2 3 4 5 6 7 8 9 10 11 - 16-20 21-25, 26-30 30 + *.
Please someone give me the solution.
Thanks in advance.
Hervé RamaHi Richard,
Just to double check, you have Setup buckets for 1, 2, 3, 4, 5, 6, 7 and 8 individually (each with a fair value). The problem is that you simply do not have all data fall into buckets above, correct?
If this is the case, it looks like has been answered your original question. If so, the label would assign 'Proper' points by clicking on the button label correct next to the appropriate response and open a new thread with your new question. The reason why I say this is it will help other people who have a similar bucket question to your solution, without complicating the issue with subsequent questions.
If you can post a separate thread, I'd be more than happy to help you with your secondary problem.
Best regards
-Joe
-
Consol error showing all the types of errors
Consol error showing all the types of errors
Are one of these errors to your Firefox problem?
-
How to convert the binary value to a binary string in labview?
Hi all
I need to convert the binary value to a binary string. We have decimal or hexadecimal or octal number to decimal string, hexadecimal and octal string
Hi pgm, use the function 'Format to a string. See the attached example. "%b" is the binary number in number in string format specifier.
-
I recently noticed this error message-
Critical error: cannot find the file [CardGames.dll]. The game cannot continue.
whenever I try to click on a card game. Help, please! Is there something I can download again to fix this error?
Hi jaymeister3580,
It seems that the problem is related to the installation of the game itself, I suggest you try the following steps:
Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below. The following steps are worth a try:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
Check if the problem persists
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
nitro loading a pdf editor and this error comes we - error cannot install the single window service
someone sees this error I'm not able to load my nitro now and it has always worked. error saying error-could not install the stop service my other programs such as microsoft office.
Hi Sandra,.
Thanks for posting in the Microsoft community
I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.
I suggest you try the steps from the following link:
Q10271 - PRB: error: cannot install the Windows Service
http://KB.nitropdf.com/article.aspx?ID=10271Hope this information is helpful and let us know if you need more assistance. We will be happy to help.
-
Error: Cannot open the file: 1
[INFO] Parsing of the command line options
[INFO] Bbwp.properties analysis
[INFO] Validation of archive WebWorks
[INFO] The analysis of config.xml
[INFO] The application of filling source
[INFO] Compiling applications WebWorks
[INFO] Packaging of the record bar
Error: Cannot open the file: 1Once I rebooted my machine it worked... But I dint knew why this error occurred
-
ASP - function Remote - error: cannot run the trigger
Hello
I tried to get my macros being run by a remote server.
It's my function file remote named "remote_test_pc.asp":
framework integrated; then
conf t
interface $INTERFACE
Description macro $TRIGGER
PC-VoIP-Port Description
switchport access vlan $ACCESS_VLAN
switchport mode access
switchport vlan voice $VOICE_VLAN
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
no event log status link
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no link-status of snmp trap
spanning tree portfast
spanning tree enable bpduguard
service-policy input PO_TRUST-PHONE
output
end
FI
framework integrated; then
conf t
interface $INTERFACE
No description of macro
Description by DEFAULT-CONFIG
switchport mode access
switchport access vlan 999
broadcast storm control level 1 k pps
multicast storm-control level 2 k pps
Storm-control action trap
spanning tree portfast
No switchport voice vlan $VOICE_VLAN
bandwidth share SRR-queue 10 10 5 75
form of bandwidth SRR-queue 10 0 0 0
priority queue
MLS qos trust dscp
no service-policy input PO_TRUST-PHONE
FI
output
end
FI
And this is my config on the switch to mac-group and the macro:
!
macro auto Test group address-mac-PC
Mac 0019.9990.5509 address list
!
comprehensive treatment of the auto macro
macro auto control global detection mac address
!
automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127
!
When I plug this workstation for the following syslog messages:
Switch #.
Remote_test_pc.asp loading!
[OK - 1702/4096 bytes]
Enter configuration commands, one per line. End with CNTL/Z.
Switch con0 is now available
Press RETURN to get started.
Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function
26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console
26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message
Switch #.
The port works as it should, but I wonder about the error message.
The switch is 2960 with IOS 12.2 (58) SE2.
Can someone explain what this means?
Thank you very much!
Sven
Hi Sven,
I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.
Thank you
Ankur-
Maybe you are looking for
-
Need to find and attach to e-mail...
-
My laptop does not recognize my printer as a scanner
ORIGINAL TITLE: scanning Can I scan a document to my laptop via a wireless connection? My laptop does not recognize my printer as a scanner!
-
Remove Java gives error application of transformations
When you try to remove older versions of Java, I get the following message is displayed. Error applying transforms. Verify that the transform paths are valid. Does that mean and how do I do now!
-
Windows 7 64 bit drivers for a db7 model Envy TPN-W107 product number C2N70UA #ABA
I need to find 2 drivers for a device universal serial bus with the hardware ID: PCI\VEN_1022 & DEV_7812 & SUBSYS_1833103C & REV_03 PCI\VEN_1022 & DEV_7812 & SUBSYS_1833103C PCI\VEN_1022 & DEV_7812 & CC_0C0330 PCI\VEN_1022 & DEV_7812 & CC_0C03 This i
-
H9 - 1170t supports Nvidia GTX 680?
The system has a 600W power supply