Error FRM-92102 which to access forms in EBS 12.0.6
HelloI get error FRM-92102, but not able to determine why this error is coming.
My setup is as below,
Appl Tier: AP1, AP2
CM level: CM1, CM2
Level DB: DB1, DB2 (RAC)
I have set up the hardware load balancer.
Now, when the application runs on all nodes and I try to access the forms, it gives me FRM 92102 error.
If I stop on AP1 or AP2 application and try to access the forms everything works fine.
I would like to know why, when the application is running on both nodes make this mistake.
Thank you
Prasad
This could indicate that the load balancer configuration is incorrect or incomplete - session persistence has implemented on the LB?
Srini
Tags: Oracle Applications
Similar Questions
-
ERROR FRM-41214 weblogic 10.3 + form + reports 11g
When I try to generate a report, I get this error: FRM-41214
and I log file check locate on /oracle/Midleware/asinst_1/diagnostics/logs/ReportsServerComponent/my_ReportsServer/rwEng-0_diagnostic.log
and I found the last lines:
[2011 11-29 T 16: 36:20.429 - 06:00] [reports] [NOTIFICATION] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] EngineImpl:run oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
[2011 11-29 T 16: 37:07.306 - 06:00] [reports] [ERROR] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] rwfdt:rwfdtprint Job ID = 143 ERR error sending out tasks to be cached
[2011 11-29 T 16: 37:07.306 - 06:00] [reports] [ERROR] [] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] engine C Job ID = 143 ERR REP-1804: BANCO printer definition file cannot be opened.
[2011 11-29 T 16: 37:07.308 - 06:00] [reports] [INCIDENT_ERROR] [REP-1804] [oracle.reports.engine] [pid: 29558] [tid: 11] [ecid: 0000JFlNlK3Fw000jzwkno0007Dq000002, 0] [EngineName: rwEng-0] REP-1804: BANCO printer definition file cannot be opened. [[
oracle.reports.RWException: IDL:oracle/reports/RWException:1.0
at oracle.reports.engine.EngineImpl.run(EngineImpl.java:553)
at oracle.reports.engine.EngineClassPOA._invoke(EngineClassPOA.java:104)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatchToServant(CorbaServerRequestDispatcherImpl.java:637)
at com.sun.corba.se.impl.protocol.CorbaServerRequestDispatcherImpl.dispatch(CorbaServerRequestDispatcherImpl.java:189)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequestRequest(CorbaMessageMediatorImpl.java:1682)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:1540)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleInput(CorbaMessageMediatorImpl.java:922)
at com.sun.corba.se.impl.protocol.giopmsgheaders.RequestMessage_1_2.callback(RequestMessage_1_2.java:181)
at com.sun.corba.se.impl.protocol.CorbaMessageMediatorImpl.handleRequest(CorbaMessageMediatorImpl.java:694)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.dispatch(SocketOrChannelConnectionImpl.java:451)
at com.sun.corba.se.impl.transport.SocketOrChannelConnectionImpl.doWork(SocketOrChannelConnectionImpl.java:1213)
to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.performWork (ThreadPoolImpl.java:471)
to com.sun.corba.se.impl.orbutil.threadpool.ThreadPoolImpl$ WorkerThread.run (ThreadPoolImpl.java:500)
Help, please!Hello
This error means that the file Banco.prt is not found.
The definition of the printer (file .prt) file not found in the REPORTS_PATH directories.
By default, these files are located in $ORACLE_HOME/reports/printers and this directory is located at REPORTS_PATH
-> Check the value of REPORTS_PATH
-> Check if BANCO.prt exists in a directory of REPORTS_PATHConcerning
-
All forms generating the error FRM-40833 after the cloning of the EBS
The Source system:
EBS 12.1.2
11.1.0.7 database
AIX, version: 6100-05-01-1016
The target system:
AIX, version: 6100-05-09-1228
After cloning EBS on the target system, it occurred "FRM-40833: not completely load the libraries for dynamic output of the user." User exit FND has not run. »
I've never seen this error, and I'm confused how fix or to follow. Any help will be appreciated.
Thank you
Brook
Hi Brook,
As mentioned previously, review the note after cloning, forms on target node with FRM-40833 error: could not load completely dynamic user output libraries. Exit user DNF did not run (Doc ID 1519381.1).
Contact IBM support for the applicable to your version of AIX APAR:
- AIX 6.1 TL 08 SP02, SP02 (01-08-6100, 6100-08-02): IV36851
- AIX TL 02 SP01, SP02 7.2 (7100-02-01, 02-02-7100): IV36875
Note: These fixes will be also in the IBM SP next packages
Connect forms and States to have executable fees:
# cd $ORACLE_HOME/forms/lib32 (Note: If this directory does not exist: # cd $ORACLE_HOME/forms/lib)
# make-f ins_forms.mk install# cd $ORACLE_HOME/reports/lib32 (Note: If this directory does not exist: # cd $ORACLE_HOME/reports/lib)
# make-f ins_reports.mk installKind regards
Traore.
-
FRM-92102: A network error has occurred
Hello
I'm running my application on my local machine by a taaged configuration file in formsweb.cfg, application was working properly, but today it has begun to me gives error mention below.
FRM-92102: A network error has occurred.
Customer Forms attempted to re-establish its connection to the Server 5
times without success.
Please check the network connection and try again later.
Details...
Java exception:
java.io.IOException: negative or zero length content from the server
at oracle.forms.net.HTTPNStream.doFlush (unknown Source)
at oracle.forms.net.HTTPNStream.Flush (unknown Source)
at java.io.DataOutputStream.flush (unknown Source)
at oracle.forms.net.StreamMessageWriter.run (unknown Source)
Please help resolve this issue.Hello
Try the following link.
If its Correct/useful please mark. Thank you
Sarah
-
Error FRM-92050 by trying to open the form after the passage in HTTP mode
Hi all
Yesterday, I installed Oracle Applications 11i on Red Hat Enterprise Linux ES 4 and forms work properly in default mode, which is a native (socket). Following steps 4 and 5 in [Doc 201340.1| https://metalink2.oracle.com/metalink/plsql/f?p=130:14:6398415066875997204:p14_database_id, p14_docid, p14_show_header, p14_show_help, p14_black_frame, p14_font:NOT, 201340.1, 1, 1, 1, helvetica], I enabled the HTTP mode and now my forms do not work. When I opened a form now, I get this error:
FRM-92050: unable to connect to server: / forms/formservlet:-1
Details...
Java exception:
java.io.IOException: negative content-length of http://...
...
I searched the forums for this error and all the results that I found the deal with HTTP headers or cookies being corrupt, usually by an intermediate network device and MetaLink (web proxy, cache Accelerator, web SSL, etc.). I do not use anything of the kind - the client connects directly to the Oracle server.
I checked the Apache error log, and that's what I see:
[Game may 14 09:10:28 2009] [error] [10.11.1.114] clients denied by server configuration: / work/oracle/viscomn/java/java
[Game may 14 09:10:28 2009] [error] [10.11.1.114] clients denied by server configuration: / work/oracle/viscomn/java/java
[Game may 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Game may 14 09:10:33 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/forms/icons/oracle_logo_light.gif
[Game may 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: / work/oracle/viscomn/portal/VIS_gen1-cs49/forms/formservlet
[Game may 14 09:10:34 2009] [error] [10.11.1.114] clients denied by server configuration: / work/oracle/viscomn/java/oracle/ewt
[Game may 14 09:10:34 2009] [error] [10.11.1.114] clients denied by server configuration: / work/oracle/viscomn/java/oracle/ewt
[Game may 14 09:10:34 2009] [error] [client 10.11.1.114] File does not exist: /work/oracle/viscomn/java/oracle/ewt/alert/resource/AlertBundle_en_US.properties
I don't like the look of these messages "client denied by server configuration." What's also weird is that the two files referenced by these messages do not exist on the file system:
[oracle@gen1-cs49 log] $ cat/work/oracle/viscomn/java/java
Cat: / work/oracle/viscomn/java/java: no such file or directory
[oracle@gen1-cs49 log] $ cat/work/oracle/viscomn/java/oracle/ewt
Cat: / work/oracle/viscomn/java/oracle/ewt: no such file or directory
Any ideas? Are there any other logfiles that I need to check?Kyle,
Routine & ROUTINE tried to start internal competitor Manager. The ICM is already running. Contact you system administrator for more than assistance.afpdlrq received an unsuccessful outcome of PL/SQL procedure or function FND_DCP. Request_Session_Lock.
Systematic FND_DCP. REQUEST_SESSION_LOCK received a result code of 1 of the call for DBMS_LOCK. Request.
DBMS_LOCK possible. Request resultCall failed in establish_icm
Internal competitor Manager has encountered an error.Follow these steps:
-Stop application services
-Stop the database
-Start the database
-Start the application services and the simultaneous mananger
-Check the condition of the simultaneous ManagerKind regards
Hussein -
Error FRM-30312 when compiling to a custom library pll on forms 11 g weblogic
Hi just posted a thread here:
Help, please.Run_product is used inside the RP2RRO_RUN_PRODUCT procedure. You can open the pll in Forms Builder and see for yourself.
Maybe the form 11g has a new rp2rro.pll. In this case use this pll instead of upgrading the 10 g version. -
Migration of a form generated by the designer: error FRM-40735
Dear colleague,
I am migrating an application Forms from Forms 9i to 10g form. Most of my forms have been created using the generator of Oracle Forms Designer.
I am able to compile all the code and generate an executable form. However, when running, I get an error at the outbreak of the first line of code in a TIME-NEW-FORM-INSTANCE.
The error is:
FRM-40735: A TIME-NEW-FORM-INSTANCE trigger raised unhandled exception ORA-06508
and the beginning of the code is as follows. The use of the debugger, I discovered that the line:
CGBS2$. SET_COORD_STYLE ("P");
will raise an error.
/ * CGLY$ INIT_CANVASES * /.
/ * Call procedure in order to ensure the correct paintings are visible * /.
BEGIN
CGBS2$. SET_COORD_STYLE ("P");
CGBS2$. SET_QRY_ON_ENTRY ('Y');
CGBS2$. SET_NAV_FROM_BLOCK ("PROJ_BLOCK");
CGLY$ CANVAS_MANAGEMENT;
END;
The error tells me that this procedure is not found? How can I proceed to find the cause and the solution to my problem? Are one of the libraries of the missing Oracle Designer form designer?
I have a trick to help me begin to see light at the end of the tunnel.
Thank you and best regards,
RandyDesigner libraries must be upgraded too. They are in
\CGENF61\ADMIN
You can compile your 10g forms, because during the compilation forms compiler resembles the source (pll). However, forms Runtime search plx files. They remain 6i if you have not upgraded their 10 g. -
Hi friend
I put the Date IN required field in the form of command client when I try to create a command, I get a
Error - FRM-41019 cannot set REQUIRED attribute of the element not enabled in ORDER. REQUEST_DATE. Please let me know why this origin of the error and how can I fix this error. Need to avoid this error pop up
Your suggestion is very good
Thank you
ThilibanSalvation;
Please check below which could be useful for your question:
Form of the results of quality of QLTRSMDF QLTRSINF enter back FRM-41019: cannot set attribute REQUIRED of non-active element [1288624.1 ID]Respect of
HELIOS -
Error FRM-92101: only 2 sessions enabled
Application server forms and reports 10.1.2.3
Windows Server 2003 R2 SP2
Hello
When my forms of the running application server allows only 2 users connected at any time before the error frm-92101 is lifted for all new connections. Surely, it is not a normal behavior?
After studying the problem, it seems that the user account that must have "Allow service to interact with desktop" clicked so that the system to allow more connections. Exactly the same problem was found here frm-92101 Forms Server failure (only after that 60 sessions are started)
However, I have a selected custom account to run the service to allow oracle to access network resources. Is there a way to allow my user to interact with the Office account?
Is there another solution to the problem?
Thank you
FM-92101: There was a failure in the Forms Server during startup. This coulp happen due to invalid configuration. Java Exception: oracle.forms.ConnectionException: forms session <30> failed during startup: no response from runtime process ...................
Check oracle document 187455.1
Hope that fixes it.
It should be reviewed too:
604633.1
Published by: mseberg on February 3, 2011 11:55
-
Get error FRM-92101 after adding a node of the Web to an existing Instance.
Hello
I added a node of the web to R12 existing EBS who already have a node of the Web. After I added the node, I get the error FRM-92101 while opening one of the nodes in the web forms. Before adding the new web level there is no problem with the forms. I ran the new autoconfig from all nodes again but the problem is still there. I am able to open the login page of two nodes, but only the question is coming with the forms. Am I missing somethig? Any suggestion please.
Thank you
Shashi.Hello
Now that I've added the node of the Web 2 Finally using auto clone and adadnode.pl scripts. Therefore all URLs accessing EBS of browser web are to redirect to the Web node 2, no matter if I have access to the application of Web node 1 or Web 2.
Did you run the AutoConfig successfully on both nodes?
Seems something must be corrected in the context file or the database for other FND tables. I don't know why it's happening. Please help me.
I still wonder why you have not enabled the file application.log until now. So, please report it the full error log here.
Thank you
Hussein -
Hello
I created a list item, "LUNA." However, when I am trying to compile I
I want to list contains the monthly, I so wrote a procedure which I call in a TIME-NEW-FORM-FORUMFRM-32082: Invalid value for given item type. List LUNA Item: LUNA Block: CONTROL Form: PONTAJE FRM-30085: Unable to adjust form for output.
but without this procedure, I still have this error... What's wrong? in the palette property for this list item, I've set type and Maximum length number = 2PROCEDURE populeaza_lst_luna IS lst_id ITEM:=find_item('luna'); BEGIN clear_list(lst_id); add_list_element(lst_id, 1, 'Decembrie', 12); add_list_element(lst_id, 1, 'Noiembrie', 11); add_list_element(lst_id, 1, 'Octombrie', 10); add_list_element(lst_id, 1, 'Septembrie', 9); add_list_element(lst_id, 1, 'August', 8); add_list_element(lst_id, 1, 'Iulie', 7); add_list_element(lst_id, 1, 'Iunie', 6); add_list_element(lst_id, 1, 'Mai', 5); add_list_element(lst_id, 1, 'Aprilie', 4); add_list_element(lst_id, 1, 'Martie', 3); add_list_element(lst_id, 1, 'Februarie', 2); add_list_element(lst_id, 1, 'Ianuarie', 1); END;
Help, please
Kind regardshave you changed the type of TANK?
-
Firefox stopped 40 access Outlook Web access, a week ago. I always get the following message:
You are not authorized to view this page
You have no permission to view this directory or page using the credentials you provided as a Web browser sends a header field WWW-Authenticate the Web server is not configured to accept.Please, try the following:
Contact the Web site administrator if you believe you should be able to view this directory or page.
Click the Refresh button to try again with different credentials.Error HTTP 401.2 - Unauthorized: access is denied due to server configuration.
Internet Information Services (IIS)Technical information (for support personnel)
Go to Microsoft Product Support Services and perform a title search for the words HTTP and 401.
Open IIS Help, which is accessible in IIS (inetmgr) Manager and search for topics titled words of security, authentication and Custom Error Messages.Thank you for your help.
NajibFirefox 40 change something that affects authentication: is no longer, it appears a name of user and password dialog box to prompt for credentials for embedded resources if they are hosted on a different server. These can include a framed page, an external script or an image, for example.
If you right-click on the error page, "This frame" appears on the menu? If so, who might follow and Open Frame in a new tab to see if it is hosted on a different server? If you reload the page without frame, it works normally?
If you are unable to work around the problem by unframing page, you can undo the change as follows. Of course, please be wary of this guest appearing on other sites where it can be to get you to reveal your credentials to another site.
(1) in a new tab, type or paste Subject: config in the address bar and press enter/return. Click on the button promising to be careful.
(2) in the search above the list box, type or paste auth and make a pause so that the list is filtered
(3) double-click the preference of network.auth.allow - subresource-auth and edit the 1 to 2, and then click OK
- 1 shows the dialog box logon only for pages framed, images, etc., hosted on the same site
- 2 allows the connection to pages dialog box framed, images, etc., hosted on any site
-What changes anything with your OWA server? If not, you can restore its default value definition; It must be something else.
-
How LabVIEW can press a command button in the Access form?
Situation: access database with a command button, which generate code after you have pressed
Task: LabVIEW open the access database, you press the command button and read the code
Status:
- Use activeX to open data access - ready
- Press the control button - open
- code - open reading
Problem: is there a possibility that LabVIEW automatically press the button in the Access form?
Dear Mike,
Thanks for the reply. You are right that MS Access is not really a database. ;-)When the operator will push the button, the program generates a serial number and add the new number in the article table.
Therefore, by pushing the button means process this code.Solution
After that I became the password to unlock the database, I have check the code behind the button and build it with LabVIEW.So it is not necessary to press the button :-)
-
Windows Update fails with error [error number: 0x800A0007]-which is not listed
Windows update fails with error [error number: 0x800A0007]-which is not listed, so unable to update the system
The other post:
Thank you for your reply - but the problem persists - this is mopre complete info.
The system starts well and runs - BUT I cannot now be updated because when I access "Windows Update" it always returns this error message.
Also, none of the messages in your "appliesto" step 2 recommended link will be applied effectively.
As far as I know - we have a standard system and I just ran again ONCE a full system virus etc check - all clean.
Also your "Mr Fixit" was performed several times, but nothing changes.
Because it enters the update process, and then always closes with this specific message (which as I said is NOT in your list of error messages), which SHOULD tell your software writers where is the problem.
This is what is happening in the process of updating before it fails:
Keep your computer up-to-date
Check to see if you need updates for Windows, your programs, your hardware or your devices.Get updates of high priority (recommended) Select among the priority and optional updates for Windows and other programs
... and it does not matter if I say "express" or "custom" - headed then:
Checking for updates for your computer...but fails after a few seconds with the same message as follows:[Error number: 0x800A0007]The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. -However, it is the State of the system for more complete information for you:
Name of the operating system Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
Manufacturer of operating system Microsoft Corporation
MISCHU06BLUE system name
System manufacturer Compaq Presario 061
ED865AA - ABA SR1610NX NA540 system model
System Type X 86-based PC
Processor x 86 family 15 model 47 Stepping 2 AuthenticAMD ~ 1790 Mhz
Version/Date BIOS Phoenix Technologies, LTD 3.33, 17/08/2005
SMBIOS Version 2.4
Windows C:\WINDOWS directory
System directory C:\WINDOWS\system32
Boot Device \Device\HarddiskVolume2
The local United States
Hardware Abstraction Layer Version = "5.1.2600.5512 (xpsp.080413 - 2111).
MISCHU06BLUE\Compaq_Owner user name
Time zone Pacific Daylight Time
Total physical memory 1 024,00 MB
Available physical memory 468,50 MB
Total virtual memory 2.00 GB
Available virtual memory 1.96 GB
Page file space 1.51 GB
Paging file C:\pagefile.sysPlease get us some help to solve this problem.
What else can I provide?I didn't ask if it was a new issue or a new problem, I asked if she was the same computer?
[This applies to your recent 'me, too' answer to another thread.]
-
Error deleting file or folder. access denied
Error deleting file or folder. access denied
try to do it via safe mode.
DB·´¯'·.. ¸ > DatabaseBen, Retired Professional - Analyst - Database Developer's - accounting - former veteran of the Armed Forces - @Hotmail.com 'share nirvana mann' - dbZen ~ ~ ~ >
Maybe you are looking for
-
cannot move to the toolbar records
What happened to the ability to drag a link into the address bar in a folder on the personal bar? I can't drag a link to the folder, it seems to be blocked somehow. Please notify
-
How can I work from my deskstop PCs, directly in a foledr shared under win server 2008 so that all my work is saved directly on the server. what I try to do is the following. I installed winserver 2008 on a machine and I created a folder for the indi
-
Timed stop loop inside a reentrant VI
I just converted a project more than 8.5 to 2009 and I found that some of the functionality that worked at the 8.5 is no longer works in 2009 (probably for a good reason...). In any case, I found that if I tried to use the timed loop vi stop to stop
-
my computer is locked
-
I get a mixture of several radio stations, when I start Audacity or ev vinyl/tape converter even when I did not open IE or Firefox. I have speakers realtek high definition.How is this possible and how can I stop this?