Error "unallowed or dynamic code tags" on a page without these...
Hello
I am using InContext Editing to a few sites now and my customers have been very happy with it, but I have a new site that has problems on a single page.
http://www.windhampilates.com/index.php
I activated the ice on the text under the main photo boxes and navigation bar, as I have on other pages. There are a few scripts that run on this page, but the only difference on this page with the rest of the site is the rotating image at the top of the page.
Ironically, I used this same script on the previous sites where I used the ice and they worked without any problems. Am I missing something?
Really appreciate your help!
-MaryAnn
Hello 108degrees,
Remove the HTML code commented out in your editable regions. They are unallowed tags which cause the error.
This has been discussed in a previous thread here: http://forums.adobe.com/message/2287299#2287299
InContext Editing returns this error when a comment in an editable region contains HTML tags. Our engineering team is aware of this problem with comments that contain html tags and work on a resolution. I apologize for the inconvenience.
Best regards
Corey
Tags: InContext Editing
Similar Questions
-
What code to navigate to page without having to open a new page?
Hello, I have a flash button embedded in a css/HTML page that I want to use to navigate to a new page without having to open a new window. Here is the code I use in the SWF file that I got the adobe tv tutorial:
http://TV.Adobe.com/watch/ADC-presents/buttons-and-interactivity-in-Flash-CS4
Here is the test page that I joined the flash button: http://ianmartinphotography.com/testers/index-Flash.html
The 'flash' button is the button "about Ian" at the top left. I want to like traditional bearings navigation on the page. (I'm working my way until the button built-in flash melted in place, that's why I use flash.)
// 1. Event handler function
function clickHandler (Event: MouseEvent): void
{
trace ("Click!");
navigateToURL (new URLRequest ("http://ianmartinphotography.com/about.html"));
}
// 2. Assign the listener
about_btn.addEventListener (MouseEvent.CLICK, clickHandler);I just want to go to another page, not to open a new window. How can I change this code to do this? Thank you!
-Ian
If you are looking for navigate ToURL function in the help documents, it lists all the window options available. For your case, you can use:
navigateToURL (new URLRequest ("http://ianmartinphotography.com/about.html"), "_self");
-
Error encountered and unknown code B56 Windows update
B56 Windows update error encountered and unknown code.
* Title *.
B56 Windows update error encountered and unknown code. I can't install 10 updates because of this ERROR! Someone at - it a difficulty for me or answer? I tried to install these updates for a few weeks now.pjrjt,
You can watch the answer in this thread. It covers the issue you see.Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
My computer suddenly used to install some updates and I get an error 643 and 646 code, please help?
Error 646 - see: http://support.microsoft.com/kb/2258121
Error 643 - see:
When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".
http://support.Microsoft.com/kb/923100When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643
http://support.Microsoft.com/kb/976982Vista
http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643Use the above as a guide to resolve the problem.
This allows to check what versions are actually installed-
The user guide for the .NET framework installation check tool
http://blogs.msdn.com/b/astebner/archive/2008/10/13/8999004.aspxOrder of relocation:
1. the .net framework 3.5, then...
2 .net framework 1.1, then...
3 .net framework 1.1 SP1You can try just as appropriate repair only the versions of .NET Framework concerned.
Downloads for the framework:
http://msdn.Microsoft.com/en-us/netframework/aa569263.aspxTaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
I was installing 2 important updates, but I always get this error 646 (KB976321, KB981726) code, pls.help
You can search every download and manually install the same.
IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB976321&displaylang=en&stype=s_basic
Save the update to a location on your hard drive, you can find and then install the update from there.
TaurArian [MVP] 2005-2010 - Update Services
-
I get the error no. 646 code
Hello
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
http://support.Microsoft.com/kb/976220/------------------------------------------------------
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspxDownload - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en----------------------------------------------------
Then run this:
How to reset the Windows Update components? -a Mr Fixit
http://support.Microsoft.com/kb/971058Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
http://support.Microsoft.com/kb/947821------------------------------------------------------------
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.Office newsgroups
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxMicrosoft.public.office.misc discussions
http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us------------------------------------------------------------
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
http://support.Microsoft.com/GP/wusupport#tab3The security updates, you can get free support Incident report
http://www.Microsoft.com/protect/resources/support.aspxI hope this helps.
Rob - bicycle - Mark Twain said it is good. -
Error 0x80072F76 Windows Update code.
Help please,
I can't do the manual Windows updates - don't know if those auto works or not - on error code prevents downloads.
I did Google and apparently it is a good registry error but can't find a direct answer or error on the Fix code he Windows site (I can't be looking correctly)? Load the Windows software could fix patches - but it did not work.
You can pay for the software that says he'll settle for about £20.00 or £30.00 books (free scan then pay you) from various sites, but if you pay and it does not work then it is waste of money.
I'd rather do not re load the operating system, as it's too much hassle to get anything about how he runs have my computer set up.
Tried to do a restore from a time back when I thought that the updates were working, but no joy.
If someone could tell me is there a way simple and safe mounting.
Kind regards
Phil H
Hello
As soon as I watched the show updates box - it has been disabled and left check and then went and tried a windows update, error code disappeared.
Looks like it did the trick, thank you much.
PH
-
an error has occurred in the script on this page. expected tank 21079 error code line 2 0
Windows media player 11an error has occurred in the script on this page.line 2Char 21079expected errorcode 0Hello
Thanks for the post. I understand that you meet the on Internet Explorer script error.
I suggest you check out the link and follow the steps.
How to troubleshoot script errors in Internet Explorer
http://support.Microsoft.com/kb/308260
Hope it will be useful.
-
What does the error code "error while unpacking program, code 2" Please report to the author"means. I started getting this error message yesterday, and there is some software that I can't receive now.
Thank you!
OK, here goes... my understanding is that you remove the update of microsoft KB2533623
To remove this update of Windows KB2533623, follow the steps below:
- Click on "start > Control Panel > programs and features.
- Click on the link "View installed updates" on the left side of the window.
- Locate the update ' update for Windows Vista for x 64-based systems (KB2533623).
- Select the KB2533623 update and then click on the "Uninstall" button
- Once the update has been removed, restart the computer.
It worked for me, BUT the charge is upgraded every time I restart so do not forget to turn off the automatic updates OR delete KB2533623 every time.
-
I can't install java. I get an error 2503 and 2502 code.
I am running vista and I'm on a home network. After uninstalling java, I keep geeting the internal error 2503 and 2502 codes when you try to reinstall java... Now I get internal error code 2753 regutls.dll also.
Hello
Install Java in the clean boot and see if it helps.To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.Note: Follow step 7 to reset the computer to start as usual after the boot process.Hope this information helps. -
popup message each startup (boot) - error while unpacking program, code 2.
I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.
VISTA Ultimate 64-BIT
1 MESSAGE POPUP
"Error while unpacking program, code 2" Please report to author. »2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
"An error occurred when loading library commonforms.dll::RegisterWindowIt may have been removed. Please reinstall the Application. If the problem persists contact technical support. »
Hello
Have you made changes on the computer before this problem?
I would suggest trying the following methods and check if it helps.
Method 1:
Put the computer in a clean boot state, then check if that helps you.
How to solve the problem by running the clean boot in Windows Vista:
http://support.Microsoft.com/kb/929135Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
Method 2:
Run the Microsoft Safety Scanner and check if there are any threats found.
Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx
Note: If no threat found check if the file is necessary or not, then delete it.
Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.
Learn how to install Windows Vista Service Pack 2 (SP2):
Hope the information is useful.
-
Hello
After looking on any 3rd party retailers appear Anytime Upgrade key for 7 to professional.
When I try Anytime Upgrade system that is integrated and use 'go online to choose Windows7 edition which is best', an error box comes in reading "an error has occurred in the script on this page. Line 0. Char from 0. Script error. code 0. "with a URL.
When I try the store I find nothing either. Can I deduce that Microsoft no longer sell upgrades between versions of windows 7?
Whenever upgrades have long past gone
Finally unless you are interested in win-10 which is.
Many win-7 pro autour on Newegg and Amazon, but they are not at level only oem / system integrator.
You could buy one and a new ssd / HDD to install on and use the original win-7 to move to 10 - win
Then passed to win-10 pro for 99.us.
-
How can I solve the error 2503 and 2502 codes when you try to install a program?
When I try to install a program I get the error 2503 and 2502 codes, what should I do to get rid of them?
2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer
http://support.Microsoft.com/kb/2438651
Also:
Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:
1. in the menu 'Start', click on ' execute:.»
2. in the "Open" box, type "msiexec /unreg", and then press ENTER.
3. in the menu 'Start', click 'run '.
4. in the "Open" box, type "msiexec/regserver", and then press ENTER.
-----------------
Check your hard drive for errors:
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: chkdsk /f /r
When you restart your system, your computer will be scanned for errors and will try to correct them.
--------------
then
Click Start
Type: CMD, according to the results, right-click CMD
Click on "Run as Administrator"
At the command prompt, type: sfc/scannowThis will check for any breach of integrity
Restart your system
-
IO error: output file: application.cod too large data section
Hello, when I compile my application using BlackBerry JDE, I get the following error:
I/o Error: output file: application.cod too large data section
I get the error when you use the JDE v4.2.1 or JDE v4.3. It works very well for v4.6 or higher.
I have another forum post about it here.
I also read the following article here.
On this basis I tried to divide all of my application, but that doesn't seem to work. The best case that it compiles for awhile and the problem is that I add more lines of code.
I was wondering if someone could solve the problem otherwise. Or if someone knows the real reason behind this question?
Any help will be appreciated.
Thank you!
I finally managed to solve this problem, here is the solution:
This problem occurs when the compiler CAP is not able to give an account of one of the data resources. The CAP compiler tries to package the data sections to a size of 61440 bytesdefauly max. "You can use the option of CAP'-datafull = N' where N is the maximum size of the data section and set the size to be something less than the default value. With a few essays on the size, you'll be able to work around the problem.
If someone else if this problem you can use the same trick to solve!
-
Hi all
I get this error message when I try to upload my site on an FTP server: Error: could not generate code to activate one or several web fonts on the page "about". [Error 500]
What is the solution?
This is the temp on BusinessCatalyst site 4 Seasons Air Care.
Thank you
Melissa
It worked:
09:26 good response from Zak Williamson (Adobe) on November 4, 2015
The original bug that triggered this error for many customers from mid-2015 to mid-September has been fixed by an update of CCLibraries, who was part of an update of the Creative Cloud Desktop application that went live in mid September 2015. Since that time, there are still some customers encounter this error. In these cases, the cause appears to be a mismatch in the State of the connection between Muse, Typekit, and Creative Cloud Desktop app.
To correct this discrepancy, please follow these steps:
(1) abandonment muse
(2) go to the designer Cloud Desktop app and disconnection of preferences (it's in a menu of the gear icon).
(3) leave the creative cloud office.
(4) restart creative Cloud Desktop.
(5) sign.
(6) revive the Muse.
At this point, you should be able to publish, upload, etc and your Typekit fonts should work without errors.
Maybe you are looking for
-
Add aps to yahoo toolbar in firefox
Firefox 20 will not let me add aps to yahoo to the yahoo toolbar
-
I have Internet explore and I am thinking to change to something else, but do not want to remove it before testing other browsers. I can add another browser on my computer to test while I also keep and use Internet explore?
-
Two weekly reports of family safety
I get my usual weekly report list which saw etc. with an attachment. But I now get another at the same time, saying that there has been no activity.
-
How do activate you the alphanumeric keys?
the numbers are located on the keys alpha e.g. u/4, i / 5, etc.
-
windows xp wireless connection
I had to completely reinstall windows xp now, I can't connect to the internet. WZC is set to automatic and started, but how do you see the router? I have verizon DSL