Fast storage Intel stopping on aspire v3 - 571
Recently my driver intel rapid storage technology has stopped several times and crashed my computer even several times again. All gel at random and then go to the blue screen with the error message "Kernal_data". I have a flag in my Center of the action, saying that the pilot of the technology has ceased, but it gives no way to really solve this problem, so I came here. Any help would be appreciated, especially if I can fix it without getting rid of everything on my laptop. Thank you.
No, it is compatible with windows 7 and more.
Probably, you need an older version than the one I posted.
Tags: Acer Laptops
Similar Questions
-
clean reinstall with fast storage intel ROM
After a series of hickups, I recently found with a need to reinstall Win 7 on a Dell Inpiron 7250, which came with an SSD and a 1 TB hard drive. Hardware diagnostic shows no errors. The problem is that when I try to reinstall the OS OEM DVD of the Bios menu is set to Intel Rapid Storage, but installation is not possible. It seems there is no disk to install to. With the BIOS value AHC installation works, but I end up losing the SSD and Intel RST feature. Having quickly skimmed manual Intel, it seems that what Miss me is: option technology Rapid Storage Technology ROM. How can I reinstall the which?
I need a set of foolproof step-by-step instructions that starts from a totally clean system. Can't help but wonder why the OEM DVD system is not able to put the system in place from scratch.
1. Windows installation media, and the UEFI BIOS settings?
Did you get a USB key of resettlement set to be installed in the UEFI with GPT partition scheme in FAT32? You have active UEFI, disabled SecureBoot and USB Debug active (USB 3.0 off):
2 SSD Windows Boot/HDD data - recommended Configuration
There are a few problems with SSD cache drives and SSD prices fell his best in most cases it is sufficient to replace the mSATA SSD with greater capacity (> 256 GB).
This generally perform much better and much more reliable than a SSD cache drive.
Ensure the exploitation of the SATA AHCI and use DiskPart to wipe the HARD drive SSD:
Clean install of Windows on the SSD and then redirect libraries:
3 SSD Cache drive Windows - Configuration public
You mentioned the model as an Inspiron 7250 number, there is no Inspiron 7250, there is an E7250 of Latitude and PowerEdge E7250.
Please confirm the model and what SATA driver, you tried to load.
Ensure that the SATA Intel RS operation.
-
Aspire F5 - 571 - Intel 5500 HD Graphics display driver stopped responding and has recovered
Hi all
Bought a new Aspire F5 - 571 pre-installed with Windows 10 two months ago.
Recently, I started to receive the error message in the subject of this post.
Do a search reveals that there might be a problem with the display drivers.
I checked the Acer site for my model, and the only available drivers are drivers VGA Intel.
Intel web site reveals that drivers for Intel HD Graphics 5500 drivers OEM and are shipped by the manufacturer - of course in this case Acer.
Someone at - it an idea if it is has updated drivers anywhere on the Acer site?
Best regards, gneil15
http://www.howtogeek.com/223864/how-to-uninstall-and-block-updates-and-drivers-on-Windows-10/
Think also to check the C:\Intel folder and remove the VGA drivers inside if the list.
-
Acer aspire V5 571 P - stop with power cable removed
Acer aspire V5 571 P - when cell phone fully charged and power cable removed from the laptop shuts... Help? Thank you.
Looks like there may be a problem with the internal battery. Battery reset press and hold the button for 4 seconds. Then, charge the battery and see if it works when unplug you the unit. If it is not the case, contact technical support to set up the repair.
-
Acer Aspire E1-571: current password for boot Acer bios menu
Hello
I'm using a computer laptop acer aspire E1 - 571 and I want to enter the boot menu by pressing F2, so he asks the current password that I don't know. Help, please
Hello
This is the HP forum, you may need this repost on the Forum Acer or communicate with their help, however, if you enter an incorrect password 3 times, you receive a stop code? If you do, post back with the code.
Kind regards
DP - K
-
Scalability of memory Acer Aspire V3 - 571 G - 9686
Hello
There are about 1 1/2 year, I bought an Acer Aspire V3 - 571 G-9686. It came with 6 GB of RAM setup in this way:
SPD EEPROM (DIMM0) information
Manufacturer: ston
Part No.: 56X64D3S13C9G
Serial number: 146718E64C0018E4
Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]
Format: IMM (67.6 x 15)
Size: 2048 MB (ranks 1, 8 banks)
Buffered module: No.
Registered module: No.
Module SLi Ready (EPP): No.
Module XMP: No.
Module XMP 2.0: No.
Width: 64 - bit
Ability of Error Correction (ECC): unspecified
Prefetch buffer: 8 bits
Manufacturing: Week 10, 2012
Temperature probe: no
Heat spreader: Yes
Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz
Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz
TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz
-------------------------
Information SPD EEPROM (DIMM1)
Manufacturer: your technology
Part No.: I1C1674EV
Serial number: 000018E64C0018E4
Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]
Format: IMM (67.6 x 15)
Size: 4096 MB (2 ranks, 8 banks)
Buffered module: No.
Registered module: No.
Module SLi Ready (EPP): No.
Module XMP: No.
Module XMP 2.0: No.
Width: 64 - bit
Ability of Error Correction (ECC): unspecified
Prefetch buffer: 8 bits
Manufacturing: Week 23 of 2012
Temperature probe: no
Heat spreader: Yes
Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz
Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz
Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz
TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz
------------------
So, it's a 2 GB module and one 4 GB. Different manufacture.
My question is:
What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB?
Thanks in advance for any help.
Kind regards.
Hello
You wrote:
"What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB? »
In fact, you have 2 sticks of memory 667 MHz. In dual channel, it means to 1333 MHz.
Specifications of aspire V3 - 571 G-9686:
Chipset: Mobile Intel HM77 Express.
Processor: Intel Core i7-3632QM
Integrated graphics card: NVIDIA GeForce GT 640M - 2 GB RAM DDR3
You can upgrade up to 8 GB (2x4gb) and Max frequency 1600 MHz. For example: If you install a single stick of 4 GB - 1600 MHz, it is single-channel: 1600/2 = 800 MHz.
-
Hi all
I need your help... Who has experience with Aspire V3 - 571 G. I'm looking for the more stable realible, drivers NVIDIA for Windows 10. The truth is, that I installed the update of the anniversary and that big problem. When I got Windows 7, which was great, I had not a problem with the FPS and now Windows 10 64-bit(Anniversary Update) I have with drivers 311.30, chipset, Wireless model 572, LAN from Windows 7 from my model great FPS drop. I think 311.30 for me on Windows 10 is unstable and has no avrasion. Warframe big lag, etc.. Now, I tried 372.54 but I don't think that it's the best idea. Warframe is still good and normal.
I always downloaded drivers mainfacturer, because it is a priority, but now... What sucks V3 - 571-G is no longer supported by Windows 10 drivers I need to find the best stable, realible, him perfoming more, but I don't know what version.
311.30 is the problem for me. I have no problem with 10 Windows and drivers... just in the game. Maybe something missing and for this reason I have little fps.
Who owns this model Aspire V3 - 571G and play games on it. Tell me what version of the drivers use.
For all suggestions thanks! Good luck.
I have the latest drivers Geforce experience. Intel drivers too. Chipsets too.
Ok.
Thanks for the help and good luck.
-
No signal HDMI when connected to the TV (Aspire V3 - 571)
Hello
I'm really trampled here and need help. I have an Aspire V3-571. Please see the summary below in the chips:
1 used to operate correctly when it is connected to my TV (via a HDMI cable)
2. one night, what laptop was connected to the TV, picture started to blink
3. after 20 minutes, the HDMI signal is not detected for the laptop
4. Update driver Intel HD Graphics 3000 (Date: 29/01/2014 Version: 9.17.10.3347)
5 tried to use different HDMI cables
6. press Fn + F5 does nothing
My TV HDMI port works with other devices when connected to it. What I'm missing here? Is there a defect of material with my laptop?
Any advice or help on this would be much appreciated. Thank you.
Hello...
All information provided I see that you have already updated driver, tried different cables and also checked the HDMI port on your TV. I suggest you check the laptop's hdmi port by plugging another device like external monitor.
If you don't get any screen, it could be a problem with the laptop's hdmi port.
-
Is the Acer Aspire R7-571 HDCP compatible?
I think that the title is pretty self-explanatory. I recently tried to download a ultraviolet movie by Flixter on my aspire with the hd option, and it is came up with basically told me what that it, or a display on it was not HDCP. However with the Aspire R7 - 571 being listed as HD, I am aware, I guess that would mean it would be HDCP.
So basically what I'm asking is if infact the Aspire 571 R7 is not HDCP or if it's actually a mistake on the part of programs?
Thank you for your help.
Have you updated the drivers available on the Acer website to the latest VGA?
If these drivers does not resolve your problem, I would try to Intel:
https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&ProdId=3712
Sort by date (most recent) and OS.
last 15.33.29.3945
-
Acer Aspire E1-571 dedicated graphics card
Hiya anyone know if taking the Acer Aspire E1-571 who joined the graphic HD4000, a dedicated graphics card? Thanks in advance
Hello
This model does not come with dedicated VGA (Nvidia or ATI), there only inbuild Intel HD graphics. If any model acer contain end letter 'G' the name of the model (Eg: E1-572G) he dedicated VGA.
Thank you
-
How to activate the port HMDI to pay on an Aspire V5 - 571?
Hi have the Aspire V5-571 and until today could play DVD or movies downloaded from Itunes on my Samsung TV.
Now, I can't. I used the HDMI cables down to the Mexico on another tv with no problems, but now I can't even watch a DVD on the tv to the laptop. I can watch DVDs movies on the laptop, but it does not help us two to watch.
We tried the Samsung fix by restarting the TV, but it did not work.
We believe that it is possible the HMDI must be enabled, but does not know where on the computer. I had to reboot my computer just before we went to the Mexico, but like I said, it worked then... help!
good answer!
try to update VGA drivers:
Intel
NVIDIA
-
Aspire V3 - 571 won't boot past POST with installed HARD drive
I am a PC repair technician and work on computers for almost 20 years and this has me completely confused. My laptop Aspire V3-571-6643 was working fine until just recently. The show the Acer and the system will fit on screen, and then restarts immediately. He'll stay in this loop of reboot until stopped manually.
I cleaned and reinstall the RAM module and also tried in both slots without change. I was able to access BIOS and determined the readers and all parameters are correct and even reset to the factory settings without change. I then removed the HARD drive used in a docking station to determine if the drive was salvagable. Everything reads well and passed short and long tests through SeaTools. With the disk installed HARD, the system attempts to start on CD/USB, but after his withdrawal the system boots on a CD very well. I then ran a full scan using Eurosoft Pc Check and all is well. I reinstalled the HARD drive and get immediately the loop of reboot again.
At this point the motherboard and drive the two test very well independently but do not go to work together. My only guess is that the motherboard is no longer providing enough power for all components and crashing when the HARD drive try to launch at startup. Or the SATA controller is defective and only work for the STRANGE. Everyone knows this problem or have ideas of how to solve? My best guess is replaced to the needs of the motherboard, but I'm not sure that I have never seen it before.
I would check with another HARD disk, if possible, as I agree it is probably most associated MB but... worth a try.
-
ACER Aspire E1-571 initialize problem.
Hi everyone, I recently bought a new hard drive for my acer Aspire E1-571 gor because the old one (500 GB hitachi) "crushed". Then I did today, it's a WD scorpio blue 2.5 "320 GB. I have installed the new drive, run an installation of windows 7 x 64 ultimate edition of windows install I divided on 2 partitions, formatted and installed the system disk. Installation is completely normal and fast but the laptop keep coming at startup screen ACER logo then restarts after the instalator finished and did the final restart before you run the Windows for the first time and again and again and again to infinity so I reinstall windows once more and it's the same thing. After that, I got the new drive from the laptop and put it in another laptop of mine an Asus and windows proceeded to the desktop without any problem. So my question is what is the case, do I need a disk for acer hitachi because no other brand will not work with it or what? or maybe its a sort of Matherboard problem with the disk?
Thanks for the help!Hmm, how about uefi? After a few readings in a thread, it seems that bios is one of messing around.
see this link; http://community.Acer.com/T5/notebooks-netbooks/Windows-7-UEFI-install-on-aspire-E1-571/TD-p/50201
or perhaps this, simple and could be much more useful, http://community.acer.com/t5/Notebooks-Netbooks/Installing-Windows-7-on-acer-aspire-E1-571G/td-p/930...
some posts here might be useful (as I browse some of them, some say install win7 on GPT with active uefi)
-
What is the procedure to recover a laptop Aspire E1 571 Windows 8 of bad hard drive?
Again, the biggest hard drive has been installed.
(1) Yes, it will work and install without problems, if you let the new unallocated HARD drive (no format) before using the eRecovery USB support
(2) No, activation is on your BIOS if you have windows 8.x; If you have windows 7, there will be a sticker on your laptop with a product key
2 (a) drivers are in the eRecovery USB media or you will be able to download a newer version here:
http://us.Acer.com/AC/en/us/content/drivers/4098;-; Aspire 20E1-571%
(3) Yes, you are right, but you don't need, since you have media USB Acer eRecovery.
-
Acer Aspire G 571-V3-6407 screen jump
Screen on 18 months, Aspire V3 - 571 G-6407 skips intermittently. Any kind of moves through a few centimeters at a rapid pace. For this, about 30% of the time. All known solutions?
Then... Sorry to say but it's a hardware problem, I suspect a bad cable.
You must contact the support service of Acer for a difficulty or if you are out of warranty, search for a local computer repair shop.
do not forget to say that he also jumps on the BIOS, this is not a problem of windows or the drivers.
Maybe you are looking for
-
Why hide my taskbar and does not come backwhenever I open firefox and other files?
Whenever I open firefox, the taskbar is hidden and does not come even if I place my cursor there. This happens to all my files as well. What is the solution for this?
-
No need for details. The question is self-explanatory. I am now on version 9 of the *.dll
-
Satellite L350D - 11K: black screen after downloading the Tempro updates
Hi Forum, yesterday, I admitted Tempro download several updates on my satellite L350D - 11K.During the last update, it was an update of the firmware, the system crashed, and it no longer starts. After removing the battery, the system starts up, but n
-
My HP m7580n lost its information system
I lost my information system and now I can't use the recovery discs, say spywary PC my PC is not allowed to run on this computer too. Also, when I run a check of updates of drivers on pcpitstop it shows my computer to an ASUS instead of a HP. I've he
-
Hello guys,. To open the screws dynamically, instead of Hardcoding the name VI in a constant string, I do as indicated below to keep addictive for my VI, so if someone ever delete the VI of the project, move, rename, it will create a wire broken some