Flash Media Server & amp; 123flashchat

Similar Questions

• Flash Media Server in Adobe Connect update

  We recently conducted an audit of security and one of the problems highlighted was that the version of Flash Media Server on our Acrobat Connect Pro (version 4.0.3) servers is no longer supported and the supported version is 4.5. We are currently running Adobe Connect 9.1.1 and I had to spend 9.3 soon. Will be 9.3 update also update the version of Flash Media Server 4.5 or higher? Alternatively he is allowed to apply just Flash Media 4.5 or higher?

  Thank you

  I do not think that 9.3 update will be updated to FMS 4.5 +. Connect is built on a version of FMS, and which usually does not change between versions of full version.

  The FMS instance that belongs to Connect is fully supported by Adobe as part of your Connect & maganga. If there is a security problem you have with it, apart from the version number, I would recommend that you raise these concerns with the Platinum support to see if they apply, or can be solved.

• Live from Digital Rapids to Flash Media Server

  Hello

  I use a Digital Rapids StreamZ (version 3.8.0) encoder to stream YouTube, Dailymotion, Akamai. I want to install a Flash server on the same VLAN as my Digital Rapids to check coding in case there is a problem with YT/DM. So I downloaded Adobe Flash Media Server and now want to send my feeds to the AMS. What the URL of the server and the name of the workflow should I use to set my Digital Rapids? How can I configure the AMS to receive the stream of the Dominican Republic?

  Thank you very much in advance for your help and advice.

  mdicamp

  Solved: an another Flash Server was installed on the same server and have priority over configurations in port. I uninstalled it and streaming to AMS works very well. Hope this helps someone else.

• live streaming with Flash media server

  Hello

  I'll work on a live project streaming with Flash Media Server. The idea is to see the video of a user to several Viewer.

  I have a few questions.

  Which protocol should I use (PLMN, rmtfp, etc.).

  Is there a tutorial for that. Help, please.

  Amit

  You can use rtmfp to do all this.

  Start here: http://labs.adobe.com/technologies/cirrus/

• Flash Media Server 3.0.1 Download Url

  Hello

  I need to download Flash Media Server 3, but I can't find any page on adobe.com to download.

  We use 3.0.1 and we need to migrate to a new server, but could not find the installation packages.

  Kind regards

  Calvin

  Calvin, please see the forum of Flash Media Server of the http://forums.adobe.com/community/flash/flash_media_encoding_servercoding.

• The Adobe Flash Media Server 4 upgrade

  Hello

  I'm trying to improve 4 AFMS to 4.5.5, using the same serial number used to install the current version, but the installation Wizard indicates the serial number is not valid.  The same serial number can be used to upgrade the current installation?

  I'm unable to move your post to the appropriate forum, but I recommend that you delete your current survey and post on the forum of Flash Media Server of coding at http://forums.adobe.com/community/flash/flash_media_encoding_server.

• Flash Media Server 4.5 fails often when I log onto the service as administrator on Windows 2008 R2 for x 64

  I recently installed the Flash Media Server 4.5 on my Windows 2008 x 64 R2

  Whenever I try to restart the service as an administrator he starts giving problems such as making connection authenticated with Flash Media Encoder Live (I installed the x 64 plugin for authentication which is with v3.2 FMEL)

  Please can someone guide me why FMS 4.5 becomes unstable and buggy once I restart the Apache Server and Flash Media Service as an administrator! I need to host files on network drives so I need administrator access... If adobe don't like the administrator name then whats the alternative workaround, for example create usernames?

  Please Guide

  One of the solutions I've found is it's to say try doing all the three Services of Windows FMS ( Flash Media Server (FMS) ,Flash Media Administration Serverand FMSHttpd) in the few controller domain or at least the same administrator account.

  After doing this first manually stop Flash Media Administration Server. After the Administration Server stops now run the Flash Media Server (FMS), which should automatically launch the FMSHttpd (Apache) Service. Once the two are started, then try to start the Flash media Administration Server.

  To make sure that Flash Media Administration Service always begins LAST you can either use the manual Batch file in the boot sequence or can set the "Delayed start" option in the settings of Services.

• Flash Media Server config

  Hello

  I'm new with this, I have a problem

  I installed flash media server on a windows Server 2008 with IIS

  When I run the test page to... Adobe/Flash Media Server 4/webroot/index.html all works

  but so call it live media encode to broadcast from outside the server just doesn't work

  Here is the config lines

  -----------------------------------------------------------------------------

  SERVER. ADMIN_USERNAME = xxxxx

  SERVER. $admin_password = xxxxxxxx

  SERVER. ADMINSERVER_HOSTPORT =: 1111

  SERVER. PROCESS_UID =

  SERVER. PROCESS_GID =

  SERVER. LICENSEINFO = xxxxxxxxxxxxxxxxxx

  LIVE_DIR = C:\Program Files (x 86) \Adobe\Flash Media Server 4\applications\live

  VOD_COMMON_DIR = C:\Program Files (x 86) \Adobe\Flash Media Server 4\webroot\vod

  VOD_DIR = C:\Program Files (x 86) \Adobe\Flash Media Server 4\applications\vod\media

  SERVER. FLVCACHE_MAXSIZE = 500

  SERVER. HTTPD_ENABLED = true

  ADAPTER. HOSTPORT =: 1935,80

  HTTPPROXY. HOST = 209.239.120.100:80

  VHOST. APPSDIR = C:\Program Files (x 86) \Adobe\Flash Media Server 4\applications

  APP. JS_SCRIPTLIBPATH = C:\Program Files (x 86) \Adobe\Flash Media Server 4\scriptlib

  RECORDER. LOGDIR =

  USERS. HTTPCOMMAND_ALLOW = true

  ------------------------------------------------------------------------------------------ ----------------

  When I use the test page I see in the log of admin page this

  Mon 12 h 02: Connect: rtmp://localhost:1935 / vod
  Thursday 12:02:02 AM: Connect: rtmp://localhost:1935 / vod

  I don't have a single address ip 209.239.120.100

  and what should be my FMS URL

  to hekp thanks a lot

  "When you say that this" ""but so call it live media encode to broadcast since outside of the server just doesn't work " - say you you are trying to connect to FMS machine of GFFE that is installed on a different machine - I'm wrong? -If this is the case - please check if your firewall is open to 1935,80 ports.

• Live from Flash Media Server in Captivate

  Hello

  We are fortunate to have a Flash Media Server (4) which allows us to distribute video on our LAN using Flash CS5 and didn't have any problems. However, when I try to use it for Captivate 5 files I've had no success (even with 4 incidentally). I tried just about every chain I can think of no position, with the post office, FLV, to f4v, /mp4:, different folders / no record (VOD) etc etc. There must be something fundamentally wrong with what I do, but for the life of me I can't think what. The media server is currently providing video on our Intranet and we also use it for Adobe Acrobat Connect Pro. Any help on this is appreciated.

  My string is rtmp://breezefms2/vod/ < nameofvideo > (no post)

  Hi Roy,

  Thanks for letting me know that the problem is solved for you. Can you move forward one step and comment in the blog post?

  Thank you

  Ashwin B remi

  Adobe Captivate team

• How to test bandwidth continuously on localhost with Flash Media Server?

  Hello
  
  I'm trying debbug my code (ActionScript 3) client that works with Flash Media Server 4 on localhost. Everything seems fine until this day.
  
  However, when I'm testing my player with other remote streaming servers, I notice the bugs because of the transmission of lower bandwidth between the server and the player.
  
  Is there a simple way to simulate lower bandwidth with FMS4 on localhost (with config, application.xml, programming...)?

  Thank you

  SEB Ethier

  Have you tried using Client.setBandwidthLimit () API available in SSAS? He can probably help you with what you want to do.

  Beside that, you can use NetLimiter or shunra utlitiy to choke BW like client-side.

  Hope that will help you.

• How to check what version of flash media server is installed on

  Hi all.

  Is it possible to check which version of flash media server is installed on my computer?

  'Open flash Media Administration Console' from start-> all programs-> Adobe-> Flash Media Server... and then sign in using your credentials that gave you when installing. After login, click on "Manage servers" and then click on 'License', you will be able to see which version and which edition of FMS is installed.

  In addition, Flash Media Streaming server, Flash Media Interactive server and Flash Media Development server are no versions and editions.

  Kind regards

  Amit

• Flash Admin Console shows no application on my Flash Media Server?

  Hi all

  My employer has a Flash Media Server, I wrote a little app video streaming a few years ago.  Well, the videos have stopped working and I was asked to solve problems.  I pulled up to the fms_adminConsole.swf and connected to my server.  Now, it has been long since I messed up with the server, but if I remember correctly, there was a great list of apps on the list on the left side of the display 'Display the Applications' to the console.  When I log in, there is no described applications.  If I hit the button "New Instance" in the empty list, I am presented with a list of all applications that I think I should see in the list of Applications.  If I choose one of them, a new instance of the application appears in the list of applications, and I'm asked to give it a name, the default being '_definst_.  If I hit enter to create this instance, it remains on the list and the instance data is displayed on the right panel until the console refreshes and then everything disappears and I'm back for an empty list of applications again.

  Go to "Manage servers", I see a list of applications on the applications tab that I expect to see.  The app that streams the video that has problems is on the list.

  Is this normal behavior for the Flash Media Server Console?  I wouldn't have a list of applications in the "Access to applications" section of the console?  I created a dozen so far, and they are all listed under servers manage > Applications, but not under "access to applications.  Can anyone comment if I'm wrong here or missed something?  Or if someone can confirm that I SHOULD see something under 'Access to applications' and that there is indeed something weird happens with the server.

  Thanks for any help!

  What you see is a correct behavior. Until and unless the applications are loaded or some clients are connected to them, they will be not shown in the default view applications tab. Try to connect to one of the applications you have and you will see that it gets automatically listed here.

• Flash Media Server 3 - Can RTMP and HTTP tunneling be set up?

  I have read a few forums posted here and also searched the Web widely but can not find a clear answer or get HTTP tunneling to work with Flash Media Server 3.

  Q1: Flash Media Server 3 can be configured for the Protocol RTMP and HTTP tunneling to work? The reason why I need to know if this will work is due to more and more customers report that the videos do not play for them, and I have concluded that these customers are sitting behind a firewall that has blocked port 1935. So I would like to set up the FLV playback control to try to spread the file on RTMP and if this does not work, use the HTTP protocol.

  Can someone please! Is there a whitepaper that you can tell me or even provide an example for me.

  Here is my asctionscript I've tried to make it work, but it does not.

  A few other notes are, the. The online FLVs in this folder: D:\Adobe\Flash Media Server 3\applications\vod\media

  The videos are recorded and then converted. FLV files and loaded into this folder.

  I have all hard coded below to try to get to operate this way first and thought that would be easier for you to help me. The ultimate solution is I use FLVPlayback control and transmit the location and. Name of the FLV file on the query string "http://www.Microsoft.com/downloads/details.aspx??" " VIDEO = rtmp://216.203.12.15/vod/flv. I pasted the code object * to show this example below the asctionscript.

  package
  {
  import flash.display.Sprite;
  import flash.filters.BlurFilter;
  Import fl.video.FLVPlayback;
  import flash.display.LoaderInfo;
  
  import flash.net.NetConnection;
  import flash.events.NetStatusEvent;
  to import flash.net.NetStream;
  import flash.media.Video;

  
  public class stream extends Sprite
  {
  var nc:NetConnection;
  var stream: NetStream;
  var playStream:NetStream;
  var video: Video;
  Variable that goes into .flv to query string
  var videoPath:String = «»

  public void Streams()
  {
  NC = new NetConnection();
  nc.addEventListener (NetStatusEvent.NET_STATUS, netStatusHandler);

  This is where I am trying to connect via RTMP and if it does not try RTMPT on port 80 HTTP

  NC. Connect ("rtmp://216.203.12.15/vod");

  NC. Connect ("rtmpt://216.203.12.15:80/vod"); ")

  }
  
  private void netStatusHandler(event:NetStatusEvent):void
  {
  trace ("connected is:" + nc.connected);
  trace ("event.info.level:" + event.info.level);
  trace ("event.info.code:" + event.info.code);
  
  Switch (event.info.code)
  {
  case "NetConnection.Connect.Success":
  trace ("congratulations! you are connected");
  connectStream (nc);
  createPlayList (nc);
  Instead you can also call createPlayList() here
  break;
  case "NetConnection.Connect.Failed":
  case "NetConnection.Connect.Rejected":
  trace ("Oops! the connection was rejected");
  break;
  case "NetStream.Play.Stop":
  trace ("the stream has finished playing");
  break;
  case "NetStream.Play.StreamNotFound":
  trace ("the server cannot find the stream you specified");
  break;
  case "NetStream.Publish.BadName":
  trace ("the name of the stream is already used");
  break;
  }
  }
  
  read a stream stored on the server
  private void connectStream(nc:NetConnection):void {}
  Stream = new NetStream (nc);
  stream.addEventListener (NetStatusEvent.NET_STATUS, netStatusHandler);
  Stream.client = new CustomClient();

  video = new Video();
  video.attachNetStream (stream);
  

  Stream.Play ("Peter_Christie_widescreen_bloomberg_hr", 0);
  addChild (video);
  }
  }
  }

  * OBJECT EXAMPLE TO SHOW HOW. FLV IS PASSED in THE QUERY STRING for WHICH THE FLVplayback control reads:

  <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,0,0" width="480" height="440" id="MediaPlayer"> 
  <param name="movie" value="/Media/VideoPlayer_Large.swf?VIDEO=rtmp://216.203.12.15/vod/Peter_Christie_widescreen_bloomberg_hr&MM_ComponentVersion=1&autoPlay=false&autoRewind=true" /> 
  <param name="FlashVars" VALUE="rtmp://216.203.12.15/vod/Peter_Christie_widescreen_bloomberg_hr&MM_ComponentVersion=1&autoPlay=false&autoRewind=true" /> 
  <param name="allowScriptAccess" value="sameDomain" /> <param name="quality" value="high" /> 
  <param name="VIDEO" value="rtmp://216.203.12.15/vod/Peter_Christie_widescreen_bloomberg_hr&MM_ComponentVersion=1&autoPlay=false&autoRewind=true" />
  <embed src="/Media/VideoPlayer_Large.swf?VIDEO=rtmp://216.203.12.15/vod/Peter_Christie_widescreen_bloomberg_hr&MM_ComponentVersion=1&autoPlay=false&autoRewind=true" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" flashvars="&MM_ComponentVersion=1&autoPlay=false&autoRewind=true" type="application/x-shockwave-flash" width="480" height="440" name="MediaPlayer">
  </embed> 
  </object>

  Assuming that your FMS is configured to bind to port 80, and there is nothing else on the binding of FMs machine to port 80 on the same IP address, your FMS should be ready to accept applications for tunnel using rtmpt on port 80 Protocol.

  Where you go wrong, this is how you make the connection in your client-side code. You don't want to connect several statements that you are... you want to do one, and then let the flashplayer running in its default login process, or set up a timer to manage failures of Protocol in your own code.

  When you call NetConnection.connect() without specifying a port (or an other rtmp Protocol) in the url, the flashplayer first attempts a connection rtmp on port 1935. If this fails, the flashplayer will automatically attempt a connection by tunnel via port 80. The status event will not be distributed until the Flashplayer Gets a successful login, or fails on all combinations of port/protocol. So, you just make a call to the connect() function.

  If you prefer to try combinations of port/protocol specific and define your own time-out, you can set the port/protocol in the url

  NC. Connect ("rtmp://myserver.com:1935/app/instance"); ")

  or

  NC. Connect ("rtmpt://myserver.com:80/app/instance"); ")

  When you set the port/protocol, the flashplayer will attempt to establish the connection on this port/protocol only and the status event based on this single attempt to shipping.

  So, if you don't want to rely on the flashplayer to treat this, you would first try rtmp/1935. In your State Manager, you inspect the event info.code property. If you don't get a successful connection, then try rtmpt/80

• planning a deployment on a large scale with flash media server 3

  Hi all

  I am looking to get hold of the white paper entitled "planning a deployment on a large scale with flash media server 3.

  Anyone have the link? I know something similar?

  Andy

  Hi Andy,.

  This document is not yet publicly released. It will be published shortly.

  Thank you
  Swathi.

• Flash Media Server Authentication component software plug-in installation question

  I downloaded the Add-in authentication for use with FME 2.5 and have been unable to install it. I'm trying to install it on my local computer that is running the development version of FMS. If anyone can shed some light it would be great. Thank you

  We have just released a new version of the Add-in to Flash Media Server Authentication for FME 2.5 that works with the release of Flash Media Server relies. You can find it at http://www.adobe.com/go/fme with version 2.5 of FME.