FMS 4.5 ports to open the firewall to the development server?
I know that I can find that answer in the documentation, but I thought that I would like here to save me some time I'm working on a project for a customer, if I can do otherthings while I wait for this answer. In any case what are the ports should I open so I can stream video with hls for Apple/IOS devices? I opened 80,8080,1935, but I think I saw somewhere that I have to open a range of ports. Not sure so this question. Thanks for your time.
Hello
Port range is not necessary. 80 (for FMSEdge tuned), 8134 (for Apache on WFD to receive queries) and 1935 (for traffic RTMP for FMS, to publish)
Tags: Adobe Media Server
Similar Questions
-
I'm in the Mexico and can browse the web but cannot get the roadrunner site to open the webmail server to allow access to e-mail. I worked around it through another proxy server, but navigation is a pain. does anyone know a solution to this problem? Roadrunner denies that it doesn't clog and so did the modem service here which is telmex?
[moved]
I had the same problem 2 weeks while in the Mexico. I contacted the support TWC and the person to whom I spoke said he had to unlock something. When he did, all my mail came in Outlook in the spam folder. It was OK because I got my mail.
I moved to a different House and now have the same problem again. I've contacted support TWC and not had much luck. The second level support person and I spent more than an hour, the call of the Mexico using Vontage. He has not found anything by the previous call that guided him by setting this time. He said that he would open a ticket and call me in the next 24 to 48 hours.
Is it reminds and solves the problem, I'll post how it was corrected.
Amigos audio!
-
I got this message on my iMac when I open the developer in LR5. "Develop module is activated" why?
Hello
- Problem solved by
- Uninstall Adobe creative cloud desktop application (CX had all perpetual programs)
- Removed LR form/library folder
Concerning
Rohit
- Problem solved by
-
change port number for the mobile server after installation
Jin
I use windows 2003 server release 2, Server Oracle 11 g R2 and oracle database lite 10g R3. I installed successfully the mobile server with port 80, but when I start the mobile server I get an error message indicating that port 80 is already in use. Now, I need to change the port number of the mobile server. can someone tell me the solution.If the Oracle Lite installation type is INDEPENDENT, then to change the port number of Olite in any other available free port number, you must edit the file by default-web - site.xml or site.xml - web-http file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.
You can at any time change the port in the file http web - site.xml and bounce services, the new port will take effect.
-
Unable to connect to port 80 on the web server on host Ubuntu guest
I have a very strange problem. I've been running a VM of 14.04 Ubuntu on my MBP under VMware Fusion for some time. I have re-installed Yosemite during the weekend for a clean installation trying to solve some of the problems I had. I now have my Ubuntu VM up and running. All right, except that I can't hit the web server on the virtual machine.
I can access the virtual machine in a variety of different ways!
- Ping: I can ping
- SSH: I can ssh in
- psql: I can connect to the database remotely via port 5432
- NFS: can I get the files of the virtual machine files on my hard drive
- Tomcat: I can access my web application directly through Tomcat on port 8080
When I do a scan of port of the virtual machine, I get this:
Port scan started...
Host port scan: 10.39.186.13
Open TCP Port: 22 ssh
Open TCP Port: 111 sunrpc
Open TCP Port: 389 ldap
Open TCP Port: 2049 nfsd
Open TCP Port: 5001 commplex-link
Open TCP Port: 5432 postgresql
Open TCP Port: 8000 irdmi
Open TCP Port: 8080 http-alt
Open TCP Port: 8104
Open TCP Port: 37805
Open TCP Port: 41301
Open TCP Port: 42060
Open TCP Port: 55224
Open TCP Port: 60974
Port scan has completed...
Port 80 is not even there. The virtual machine itself, I can access the site via port 80:
wget xnat@xnatdev:~$ http://xnatdev.wurstworks.com
-2015-06-22 11:20:50- http://xnatdev.wurstworks.com/
Resolution xnatdev.wurstworks.com (xnatdev.wurstworks.com)... 127.0.0.1
Connection to xnatdev.wurstworks.com (xnatdev.wurstworks.com) | 127.0.0.1 |: 80... connected.
Query HTTP sent, awaiting response... 302 Found
Location: http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4 [next]
-2015-06-22 11:20:50- http://xnatdev.wurstworks.com/app/template/login.VM;JSESSIONID=18A2C3A7C7AB6A63F39F7AC49E54FCD4
Reuse an existing connection to xnatdev.wurstworks.com:80.
Query HTTP sent, awaiting response... 200 OK
Length: unspecified [text/html]
Record on: 'index.html '.
[ <=> ] 12,818 --.-K/s in 0.001s
2015-06-22 11:20:50 (11.2 MB/s) - 'index.html' saved [12818]
But the host OS, I get this:
wget rherrick@Aerys:~$ http://xnatdev.wurstworks.com
-2015-06-22 11:21:50- http://xnatdev.wurstworks.com/
Resolving xnatdev.wurstworks.com... 10.39.186.13
Connection to xnatdev.wurstworks.com | 10.39.186.13 |: 80... has failed: connection refused.
I tried switching between NAT and open networking (I know that I had to work with NAT before, but I'm willing to try anything at this point).
I'm on OS X 10.10.3 and the most recent, and VMware Fusion 7.1.2. Any ideas on how to get this working would be greatly appreciated!
OK, got it market. The issue was the listen directive in configuring nginx for connecting Tomcat. I'd put it domain name FULL and port 80 on the server, but something I did is the determination of the FULL domain to 127.0.0.1 instead of the IP DHCP-published name. If this does not work because the incoming request has been the full domain name of host configured in my/etc/hosts, OS, then nginx not pair together configuring nginx for the domain since listening has been screwed up.
-
Add a network printer (add printer vs right-click-> Connect)
Hey just have a quick question that I can't find anywhere.
To add network printers is there a difference through the add printer from the Menu then opening just the print server in the Explorer, and then right-click on the printer you want and pressing on connect?
Hello Doughty08,
No, there is no difference. Both methods will install the same printer available driver and the two will work the printer even. -
Open the file server .txt and analysis
I'm trying to open a .txt on my server and analyze the content, the content is a version number and a link.
I have something like this
ContentConnection updateConnection = null; try { updateConnection = (ContentConnection) Connector.open(updateUrl); ..... ...... } catch (ConnectionNotFoundException e){ e.printStackTrace(); } catch (IOException e){ e.printStackTrace(); } catch (IllegalArgumentException e){ e.printStackTrace(); }
I'm capturing the IOException exception. Is it possible to open a txt file and analyzed. I can change the format of the file to something else if necessary. I thought that keeping it as a txt should be ok because I have to analyze only 2 pieces of information about him.
Thank you.
You can use
to retrieve the file.
create a string from the byte array and analyze its contents.
-
Connect to open the ldap server using ODI
Hello
I need to use openldap as dataserver in ODI. But I'm not sure how to provide the connection string valid. My test ldap server:
-Host: 172.18.0.106
-port: 389
-base dn: dc = example, dc = com
And (optionally), root (simple authentication) access:
-Bind dn: cn = jimbob, dc = example, dc = com
-password: pass
So I'm trying to start with anonymous access (read-only), it's my connection string:
JDBC:SNPs:LDAP? ldap_url = ldap://localhost:389 / & ldap_basedn = "dc = example, dc = com"
Unfortunately, this works now:
java.sql.SQLException: ODI-40528: a com.sunopsis.ldap.connection.SnpsLdapDriverPropertyException occurred, saying: ODI-40546: a user has failed
Why he asked me to the user? ODI documentation says, this user/pass are not mandatory.
What are the access channels for anonymous access and root (or any other user) correct connection in my case? The two methods works with apache directory studio.You can define ldap_auth = none for the anonymous user.
Username/password is required otherwise. Please refer to http://docs.oracle.com/cd/E21764_01/integrate.1111/e12644/appendix_ldap_driver.htm#CHDHCABH
Thanks,
-
Should I configure teaming for ports connect to the ESXi Server?
Greetings,
I want to install an ESXi 4.1 on a Dell 2950 with network 4 GB ports. 1 of them is used as netowrk management and I would like the rest of the team 3 connection, my question is should I configure teaming for these 3 switch ports on the physical switch for these 3 connection of ESXi?
So far I have nothing on physical switch and it seems fine, I just want to know that.
Thank you
Mike
If you do not need to run the virtual machine in different VLAN, then you don't need to configure a lot of things about the physical switch. Make sure only allow multiple MAC addresses on each port (switchport mode access) and covering the whole tree portfast.
Configure vSwitch with uplinks 3 and you're ready. ESX will assign uplink in a responsive manner, because the virtual machines are powered on (default: route based on the source port id).
André
-
running php on the development server scripts
Hello
I have server development Coldfusion and Apache running on my local host. CF is on port 8500, and Apache runs on port 80.
My remote host in plesk, I may add support for Coldfusion and PHP, is it possible to run PHP files on localhost:8500?
Thank you
Sweet. I run this Setup on Mac 10.5.7 and it's awesome (PHP & CFML on port 80, that is).
The simplest solution is to reinstall CF as a multi-server and run the Apache connectors. Setup of Mac CF (8.0.1) most recent is "built" for Leopard, so it works well.
Mark Drew has a good post:
http://www.markdrew.co.uk/blog/post.cfm/running-ColdFusion-8-on-Leopard
Aaron West also has an excellent post on CF 8 and Leopard:
eopard http://www.trajiklyhip.com/blog/index.cfm/2008/1/14/ColdFusion-8-Apache-22x-and-OS-X-105-L
If you encounter an obstacle, PM me & I can help more (I have panic installed this $% & @ thing so many times)!
-
Hello world
I need to know that is there any file Installation of Oracle DB, which is less than 1 GB and I can use it as a DB, con in my office, that I am not allowed to download any files larger than 1 GB. I need to use only for practice, please think as soon as POSSIBLE. Your help would be appreciated.
Thank you.
FIZZZ...Hello
Download the oracle 10g database.
Check out the link:
http://www.Oracle.com/technetwork/database/10201winsoft-095341.htmlHope help :)
Thank you
A H E E R X -
I can connect to windows live hotmail, but I can't open the emails.
"I can connect to windows live hotmail but I can't open the emails, Server error appears on the screen, but I'm connected to the internet, please help.
Hello
You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.
According to the error you found, it may be a known issue, see the following announcement:
-
(1722) the RPC server is unavailable
I installed Medieval Bluetooth Network Scanner 1.4.0.0. c and when I try to refresh the list of devices I get this error.
Hi bombachristian,
Uninstall or remove ports and drivers, then reinstall the scanner. You can follow the steps below:
a. click on start
b. click on Run
c. type cmd in the Run dialog box
d. type: printui/s/T2
e. opens the printer server properties page
f. remove the installed scanner driver
g. click the port tab and remove port
h. restart the computer, and then reconnect the scanner. Let windows install the printer drivers through Windows update.
If the steps above do not help, then you can post in your query in the Sub forum:
http://www.medieval.it/Forum.html?ID=6
With regard to:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I can receive e-mail in Outlook Express 6 ok, but when I try to send an email I get the following error message - "the server does not support an SSL connection. Account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, server response: 250 OK', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D "."
If I go to accounts/properties/Advanced and uncheck the box "this server requires a secure connection (SSL)" to "Mail outgoing (SMTP)", I get the error message - "the message could not be sent because the server rejected the sender's e-mail address. The sender's e-mail address was ' * address email is removed from the privacy *'. ' Object 'Test message', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, server response: ' 530 5.7.0 must issue a STARTTLS command first ', Port: 25, secure (SSL): no, Server error: 530, error number: 0x800CCC78'.
The only thing I changed on my PC recently is IE - updated to IE8.
I don't know if that's related to this problem. I use Outlook Express 6 occasionally for sending email, so I don't know whether or not this problem started when I upgraded to IE8. My ISP is MSN.Try to use port 587 for the outgoing server, ensuring that 'this server requires a secure connection' is checked.
Brian Tillman [MVP-Outlook]
-
Windows 7 64 bit Pro connects to SQL Server on the Windows Server 2008 R2 Standard domain
I put upgraded to Windows 7 Professional computers to Windows XP Professional, but I have a problem with getting one of software programs management of stock that allows us to connect to our SQL Server 2008 R2 Standard Windows on new Windows 7 computers.
Our computers are connected to a domain, and therefore SQL Server. Computers Windows XP allows each user to standard domain to connect and to connect to SQL Server via the stock management software.
But on the standard domain of Windows 7 Pro computer users unable to connect to SQL Server, but administrator accounts of area on the same Windows 7 Pro computers can connect to SQL Server through the inventory control program.
I have set up the alias of the server, the server name and port number via the SQL Server Client Network utility (
cliconfg.exe
) so I know this isn't the problem because it works when I'm logged on as a domain administrator.There seems to be something to do with permissions of user domain and Windows 7 Pro. There seems to be a change from Windows XP Pro to Windows 7 Pro that does not allow standard domain users to connect to a SQL Server. But I can't find anything about and cannot practice how to solve this problem, except to make all users, domain administrators that is obviously not a good thing to do. So basically I think I need to create a group policy that allows users to connect to SQL Server, but I have no experience in doing this and don't know where to start.
Thank you for all that you guys help and I hope someone can give me the solution to this problem.
This issue is beyond the scope of this site and must be placed on Technet or MSDN
Maybe you are looking for
-
Do I just update iphoto 8.1.2 so I can use the cloud?
I don't know if it is possible to simply update the photo program so that I can access the cloud or if I need to update the entire operating system.
-
Toshiba Regza 32 '' TV - impossible to set properly
HelloMy daughter has a Toshiba Regza 32 '' TV (not sure exact model).When I try to tune the TV finds it a good set of channels, but while we are Wigan and very close to the winter Hill transmitter, he finds ITV Wales and C4 Welsh language. Instead of
-
Satellite A100 - Internet becomes slower after 10 minutes
Hello the Satellite A100 worked well for a few years, the internet has become suddenly too slow after 10 minutes of the start.The laptop switched on the first time that the internet works very well the 10 first minutes then becomes slower and slower
-
someone sent me information to try to fix my cd/dvd doesn't work do not and after that following the steps, it is still not work.i said, maybe I need to reinstall the driver if someone can send me the link to microsoft so I can get the driver for rei
-
I "dragged" a folder of a drive on the DESKTOP so I could copy on a new disk. When they are copied to a new disk, the file is empty. The file is recoverable?