Similar Questions

• Place .jpg of PS CS3 to the IllusCS3 file size question

  Newbie here-Good Morning

  I have created a doc in Illustrator which will be finally saved as a pdf for viewing online.  PS, I am increasing the ppi images from 72 to 300 as well as decreasing its size, average savings quality jpg and I get a file size about 175 k (perfect for me).  When I place the image in Illustrator and save the file, I get an overall document file size increase of more than 800 k.

  Is it possible to avoid this?

  Thank you!

  I wouldn't worry. You can always "optimize" the PDF file in Acrobat to reduce its size. If you need to do in artificial intelligence, the trick is to make good use of the resampling options in the PDF saver. If you type to match the parameters, then it should correctly recognize JPEG images as already being the size and the correct resolution and not resample the, but nest them with their initial size.

  Mylenium

• How to check the file for the virtual machine size Esxi shell

  Anyone who can tell me how to check the file for the virtual machine size Esxi Shell. I tried this command-h ls but does not work.

  Have you checked "ls-lh', it will provide information as the attached screenshot." "

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• Cannot get data author and the title for the pdf files display in the Explorer of Windows 7

  How can I get Windows 7 explore to display the author information and the title for the pdf files?  I can get columns to display for the author and the title of information, but they are empty and when I click it, I get the message "not specified."   I use Acrobat to create and read pdf files.  Pdf files, I create include the author and title information in the metadata, so I know the information are here. When I used Windows XP, I could hover over a pdf file and metadata would leap upward with the author and title, but Windows 7 does not display no information in the pop up more than Tpye/size/update even if the metadata author data and the title has been entered.

  nothing to see here...

• "The file is too large for the destination file system? How to move this file to another folder with this error?

  Working with Windows 7. I'm trying to move files to other readers. . What is the work around whan "" the file is too large for the destination file system"is the error messages. Can it be fixed so you can move the files

  Either there is not enough space on the destination or the size of the file is larger than the destination system can accept, for example FAT32 cannot have a file size more than 4 GB.

• Icons of file type for the .docx files are incorrect

  I started with a version of Microsoft Excel and Word Starter on my computer, but once I started University, I had to install a trial version of Office Professional. Since I installed the trial version and then uninstalled the starter version, my icons of file type for the .docx files resemble white pieces of paper. However, all other types of files shows an icon of Microsoft Word, such as for example .rtf files. Only the .docx icons are incorrect on the hard drive of the computer and to a flash drive I carry school (icons are correct on the flash drive on the school computers).

  I noticed several instances of this question which arises and have tried the following:

  (1) I gone through Control Panel and repair of Microsoft Office Professional 2010 (and restarted the computer).
  (2) I tried to check the default program for the .docx file type and he was placed to Microsoft Word. I have reset WordPad and return to the floor, but that did not always help.
  (3) I tried the command refresh of Cache icon through the Run dialog box.
  4) went through the registry to check the icon for docxfiletype, but my problem with this is that the icon for Microsoft Word is not a default system icon.
  I don't know what else I could try to fix this and I really should leave him alone because my files opens properly, but I think it's very boring and for some reason any he just in general that bothers me.
  Any other suggestions would be welcome!

  sacurasaturn, the professional office changed the icon to its own icon. they think it's better

  You can soothe just automatically change the icon back manually or if you want to be the original or even a custom of your choice

  http://www.SevenForums.com/tutorials/57455-file-extension-icon-change-default-icon.html

  I have a theme of black plague computer software as it is nice and ive messed with it before should not take a lot of space to all the

  also if you want to have the extencion in your registry and have more control on it here is a video tutorial on adding the extencion to the registry

  http://www.YouTube.com/watch?v=m-TW-2ngvKg

  Have fun

• Please can you tell me the maximum file size by default to an attachment in the v12 case management?

  Hello

  Please can you tell me the maximum file size by default to an attachment in the v12 case management +? I am able to set a maximum size for attachments, but I'm not able to see what is the default value.

  Thank you

  Kind regards

  Anthony

  Hello

  Attachments by default max size is 8 MB.

  Kind regards.

  Mike

• Incorrect (inflated). The VMDK file size

  Hi all

  I am running VMware Workstation 10.0.2 build-1744117 and scratching my head as to why the size of my. The Guest Windows 7 x 64 newly deployed VMDK file is so great despite having supplied a vDisk 60 GB and opting for do not pre-allocate space.  My VMDK file size is close to 60 GB, while on the comments, it shows only ~ 21 GB consumed.  I tried without success the compaction.  It is not compatible with other virtual machines, I in which the VMDK file size corresponds to the capacity in use on the vDisk. Please find below the screenshots of corroboration.  It would be much appreciated if someone could shed some light on why this is the case.

  COMMENTS:

  

  

  HOST:

  

  

  Thanks in advance, see you soon!

  Sorry I lost all time clicking on this post.  After a nominal amount of research, I discovered the error of my ways and proceeded to reduce the volume.

  See you soon!

• How to free up disk space for the database file

  Hi experts BDB.

  I use bdb4.6.21 transaction Btree access method, found that after vacuum db db-> truncate, the size of the db file has changed. How to free up disk file db space? It can be configured?

  Thank you

  Min

  Hi Min,

  What Mike says is that you do not expect that the empty space after an operation of truncation (for example a delete or update that empties a page) in the database (empty pages) to return to the file system and therefore to see the physical file size decreases.

  The next section of the documentation explaining this: required disk space

  Space released by removing the key/data pairs in a Btree database or Hash is never returned in the file system, even if it is reused when possible. This means that the databases Btree and hash are to develop alone. If enough key is deleted from a database which shrinks the underlying file is desirable, use the DB-> compact() method to recover disk space. Alternatively, you can create a new database and copy the folders of the former into it.

  
  

  So, as Mike suggested, you can dump and reload the data into a new database, or copy data from the existing/old database to a new (to remove the old database and rename a new one the old name), or you can try to compact the database using the method compact().

  If you use compact(), then in order to force the return of empty for the file system pages when possible, use the DB_FREE_SPACE flag and try to avoid using an explicit transaction (use a NULL tnxid pointer, so this BDB will use internally of several transactions that will be engaged periodically to avoid locking large sections of the tree).

  When you use the compaction in order to free up space and return pages from database empty in the file system that it is generally recommended to repeat Compact with a value low 'compact_fillpercent '.  In addition, the following output statistics fields in the structure DB_COMPACT, compact_pages_truncated and compact_pages_free should be examined to determine if there is a point, continuing to run the compaction with the same compact_fillpercent.  If the values are strict positive it is then compact() calling again with the same compact_fillpercent (and specify the DB_FREE_SPACE flag).  The compact algorithm allows a single pass on the pages of the database;  pages so not empty at the end of the file will prevent the free pages (which are placed on the free list) to be returned to the file system.

  Kind regards

  Andrei

• What is the maximum file size model?

  Dear Experts,
  I'm looking to download a RTF model in responsibility of administrator of XML Publisher with 11.5.10. This is a large file of 22 MB because it has a watermark image. There is an error when I try to download this file.
  
  Do you know what can be the maximum file size of the model?
  
  Thank you very much
  Mark

  It's a bit like having images used as boilerplate in Oracle Forms. Whenever the form is refreshed or called, the standard text (and images) must be made. In comparison, the images cached display much more quickly and can be stored on the application server. For the treatment of the data, do the boring tasks on the server, not in the form (or model) itself. If your model has to read/load much of other submodels, same idea.

  You must Transact in appearance compared to the features. So, it is true on the Web pages.

• How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file.

  How can I delete a file on my iOS device that I downloaded from my iCloud? I just want to keep the Preview on my iOS device without using my storage iOS for the entire file. This means that the file is still in the iCloud and available to be downloaded to any device.

  In practice, I want to be able to scan and download through my documents located in my iCloud and once I didn't need them on my iOS device I would like 'load their return to the cloud' to my storage of the iOS device is not used.

  Thank you in advance to the community!

  Max

  The only way I found to do that once a file has been downloaded is to remove it and add it again through either from Finder on Mac or iCloud.com.

• where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  where can I find the chassis for the import file in MAX to draw the circuit diagram before you buy

  chassis: NI SMU-1078

  ini file to import into MAX

  See attachment

  THX

  Hi again Koen,

  Unfortunately, you can't simulate a complete PXI system, so we do not have the ability to simulate a PXI controller unit. The simulation, you can do is to set up the cards you want to use in you.

  concerning
  Lars

• BlackBerry Smartphones how can I increase the maximum file size allowed on the media?

  Whenever I have record video using the video camera, after a very short time it will stop recording and gives a message 'maximum size of the file reaches. I've adjusted the settings to save in 'Normal' mode, but while recording appears in last a short time, the result file size is way too big to be able to easily send to contacts. When you use the MMS mode the recording time is much too short. Is it possible to increase the maximum allowed size of the file so that a resulting video would be about 3-4 MB or less?

  You can download any software video conversion on the net. just try this one "Freestudio".

• When you open a photo to the Lightroom file in Photoshop the photo file size is automatically reduced. How can I fix it?

  When you open a photo to the Lightroom file in Photoshop the photo file size is automatically reduced. How can I fix it?

  misterv1 wrote:

  Example image

  3504 x 2336 @ 240 ppi JPEG original image size now the size of the image is 3504 x 2336 @ 72 dpi.

  So, in my words, your picture has not changed somehow in Photoshop. There is no sense and doesn't matter the number of ppi. The important numbers are pixels.