Get the necessary image size

Similar Questions

• The actual Image size

  First of all, thanks to Jongware to provide this useful script.

  I found the script in this of created by Jongware (see link below). Its working fine.

  http://forums.Adobe.com/message/4329277#4329277
  

  But I need small changes in there.

  This script allows to save a report that contains the name of the image and the size.

  Can I get the size of the actual image in pica by this script.

  For example:

  The actual image size is 29p0.75 x 11p11.356

  Currently written script size is 29.1 x 11.9 pt.

  He change this so that it gives the size of acutal pica, 29p0.75 x 11p11.36.

  Thank you

  Kerosk

  Be warned that what you call "the actual image size" is always rounded to * some * degree. As you can see in the value returned by the script of Trevor, InDesign is accurate up to 13 or 14 digits, and I doubt that you would like to see all of them.

  In any case, the problem occurs because pica is not a decimal unit - they are in fact "duodecimal" (base 12). Using points as the basis of measurement, dividing the result by 12 and then showing * only * three significant figures leads to the same screen as in InDesign:

  //DESCRIPTION:Write image size report
  // A Jongware Script 21-mar-2013
  var hmu = app.activeDocument.viewPreferences.horizontalMeasurementUnits,
          vmu =  app.activeDocument.viewPreferences.verticalMeasurementUnits;
  app.activeDocument.viewPreferences.horizontalMeasurementUnits = app.activeDocument.viewPreferences.verticalMeasurementUnits = MeasurementUnits.POINTS;
  res = [];
  imgs = app.activeDocument.allGraphics;
  unitname = getCurrentUnit();
  for (i=0; i		   

• I really want to get the IMAQ Image IMAQ Arry case to Image.vi files

  Hello!

  Although already, I installed LabVIEW8.2 and NOR-IMAQ, I don't have IMAQ Image cases and IMAQ Arry Image.vi files.

  To use the infrared camera, I need them.

  I really want to get the case Image IMAQ Arry Image.vi files IMAQ.

  How can I get these files?

  Please, let me know the methods.

  Sincerely!

  Thank you very much for your explanation.

  Solve the problem.

  Have a nice day ^ ^

• I recently bought two pictures for my youth group. When I looked behind them image is a larger image, but, when I downloaded it it's a smaller image. How can I get the enlarged image?      #93598775 & #18109349

  I recently bought two pictures for my youth group. When I looked behind them image is a larger image, but, when I downloaded it it's a smaller image. How can I get the enlarged image?

  #93598775 & #18109349

  Follow these steps: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Rewrite the query, select below or try to get the necessary O/P

  Hello..
  
  My example of data.,.
  
  Create table customer (name varchar2 (10), telephone1 telephone2 number (10), number of phone3 (10), (10) number, bitwisephone number (10));
  
  Insert into customer values('a',23456,67890,null,12345);
  
  Insert into customer values ('b', 67459,89760,null, 37689);
  
  create table do_not_call (dont_call number (10));
  
  insert into do_not_call values (67890);
  
  insert into do_not_call values (37689);
  
  Question: -.
  --------------
  
  Customer 'a' has value of numbers1 as 23456.check if telephone1 exists in the do_not_call table.
  In fact there is no, so set the bit for numbers1 as "o" like wise search telephone2
  & phone3.after update of the bitwisephone for each client should be as the output below.
  
  
  Need to O/P: -.
  -------------------
  
  name bitwisephone
  
  a 010
  b 001
  
  
  For that matter... I use "any" operator...
  
  
  
  SELECT name, case when numbers1 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
  -case when telephone2 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
  -case when phone3 = all (SELECT dont_call FROM do_not_call) then '1' other '0' end 'Bits '.
  OF THE customer;
  
  
  Is there any other way to get the necessary O/P?
  
  
  Thank you!!
  
  Kind regards
  VijayRajaram.

  Looks like one already answered Re: rewrite the query, select below or try to get the necessary O/P

  with
  customer(name,phone1,phone2,phone3,bitwisephone) as
  (select 'a',23456,67890,12345,null from dual union all
   select 'b',67459,89760,37689,null from dual
  ),
  do_not_call(dont_call) as
  (select 67890 from dual union all
   select 23456 from dual union all
   select 37689 from dual
  )
  select name,
         to_char(mod(trunc(sum(weight)/4),2))||
         to_char(mod(trunc(sum(weight)/2),2))||
         to_char(mod(sum(weight),2)) bitwisephone
    from (select name,phone1 phone,4 weight
            from customer
          union all
          select name,phone2,2
            from customer
          union all
          select name,phone3,1
            from customer
         ) c,
         do_not_call d
   where c.phone = d.dont_call(+)
     and d.dont_call is not null
   group by name
  

  Please do not duplicate messages

  Concerning

  Etbin

• "Could not complete the command image size because that file name is not valid"

  Hello

  Please help me, when I try to resize the file psd his watch this message... .whats the matter?

  "Could not complete the command image size because that file name is not valid"

  Thank you!

  I had the same problem with you and tried to look around, but I solved it myself. One or two layers created by the insertion of your library which have been uploaded to the server cloud.

  When you open the file, you can see the warning as "recreate a link... blah blah your file" If reject you the message, you can still work on it, but you cannot resize, or drag all layers to other new file (tried).

  Everything you need that discovering the layers that are related to the server delegating and delete it. FACT.

• Is there a way to return to the window "Image size" traditional?

  In the new CC in Photoshop, there is a new window simplified "image size."

  I would like to return to the previous mode. If I change straight pixels or measurements, taken a pop up.

  We do print and web, so sometimes you need pixels, you need sometimes inches or mm. But we used change them in right way, now you must choose via pop-up. This differs from the workflow.

  There is no way to return to the classic Image size box. You will need to use a previous version of photoshop for this.

  Gene

• uniquifyforuser can't get the name unique size, code 1355

  Just installed v11.1.1.1 on Windows XP SP2.
  
  When I launch Excel, I get:
  
  uniquifyforuser can't get the name unique size, code 1355
  
  
  When I run Visual Explorer, I get the same thing.
  
  
  Clues?
  
  Thank you!

  A couple of things come to mind first... What is the ARBORPATH on the desktop? I saw him get messed up in 11.1.1 installs. Also, have you tried the standby old "restart the computer" to see if it made a difference?

  Tim Tow
  Applied OLAP, Inc.

• Export the LR5 Image size

  I used LR a good amount and you have not run into this problem before.trying to export images for use in Wordpress (resolution 1620 x 720) and that I put the 'image size' parameters as 1620 x 720 and 'dimension', 'pixels' and 'resolution 300', she continues to their output to 960 x 720.

  The original file size is 3264 x 2448 in JPEG format.

  Also, I use Lightroom 5.7.

  Any thoughts on what keeps me out in my size?

  Thanks in advance for your help.

  Best,
  Glenn K.

  You first need to crop the image to a lengthening of 1620 x 720 (or equivalently of 9 x 4), and then when you export with the 1620 x 720 size settings, you will get what you want.

• How to print the specific image size?

  Hi Gang - How can I print an image 11 x 15 "on paper 13 x 19"?  Initially, it seems easy, but things are not how to navigate. Here's what I did:

  I exported the photo and used the dialog box LR image resize to 11 x 15 "- easy."

  I imported the exported image (assuming that the image was 11 x 15 ") and then in the LR print area - it is where the confusion begins.

  The print tab displays the dimensions of the image as 8 x10.19 in.  Help, how can I do the 11 x 15 "I need it to be?

  I understand that I will need to adjust the image to get the part I want in the space of 11 x 15, but for the moment, I can't even 11 x 15 "size.

  I tried package customized options, but no luck there.

  I would like to Print Studio Pro Canon plugin that works very well. Except, again, I don't know how to ask the image size 11 x 15 "for printing on paper 13 x 19".

  Fiddling with settings, I printed a dozen attempts and still no luck to reach 11 x 15 "size of the image on paper 13 x 19".  For now, I'm OK with the image to cut or to another plane - no baby - I need to know how to make the print image 11 x 15 "size of the image. A

  Thank you to offer suggestions.

  Screenshot shows that my image 11 x 15 "is 8x10.19; I don't know how 11 x 15 ".

  

  LR v5.7

  Mac OS X Yosemite v10.10.2

  Brain: generally intuitive, but need some help on this issue!

  The first step in the Lightroom print module is to click on the Page Setup button, select your printer, and then select the paper size. It looks like your screen to paper size correct has not been selected yet, because you said you wanted to print on paper 13 x 19 inches, but the paper on the screen is only 8.5 inches wide. My guess is that Page Setup is always programmed for letter-size paper, and you should come back on layout and change it. After you do this, if your layout Style is unique, you should be able to affect the size of the cell 11 x 15 inches.

• How to get the background image to fill the browser and stay fixed in IE and Firefox?

  Basically what it says in the title. I came very close to achieve, but something comes to Moor in the html and css code...

  First of all, I use the latest version of Firefox and IE8 to test this situation.

  I used 2 sources of information to get this done: 1) http://css-tricks.com/perfect-full-page-background-image/ and ) 2 http://stackoverflow.com/questions/8958697/css3-background-size-cover-doesn ' t-make-image-co-ver-vertical

  
  

  In 1 case , the example of the called page CSS-Only Technique #1 gives the code that works almost perfectly for me, except that obviously I need to a background image, but the CSS provided ago obviously just for an image has fallen in the body of a page without taking account of any other content that may already be there. "The html code that I put on the page is simply < img class ="bg"src ="... / pictures/background_image.jpg "> "

  Of course, I used the CSS code in the example, less the last piece which is "@media screen" etc., which seems irrelevant to me. Of course by replacing the values according to the picture on my page.

  So what happened was that it worked almost as expected in both browsers (which means the image filled both browsers first as it should and also remained fixed when I zoomed in, inside or outside, in each case), except that the picture went on top of the current content that I already there precisely because there isn't a background in this 'technical '. (A note on the side of curious, is that the image didn't turn down content, I expected under normal circumstances, but he went right on top of it so she she hidden (like the z-index).)

  One thing that bothers me in this regard 'technical' is that if you click on view the demo just below the code provided, you will see on the example of work page (bottom of the forest), the image clearly works as a backdrop and the content is fortunately located on top! So I don't know if the person who provides the example was trying to deceive people or what! Or he got lazy and showed another page which did not use the exact code, he has provided. No matter.

  In any case this leaves me with only half-completed work, because I still need a background image that functions as the 'normal image' code provided.

  In 2 cases and on this page, the first example provided gives the CSS for clutter - namely the code in the html {...} part and shows also the same "normal image" code as shown in box 1. In this case however, that the person provide a suggestion, the html and the css is not really properly more Moor some css and html seems a little redundant. So this time, when I used the part "html" in the CSS code (i.e. just the bit that was no longer relevant), I had two different behaviors in each browser and neither of which was quite what I'm looking for. In IE8, initially the page seems well (background fills the page and the content is on top) but when I Zoom in or out the background also zooms in or out accordingly so is NOT fixed. In Firefox, the background image stays fixed, but because the image is initially not the height of the browser I guess the code it extends down (keeping the proportions - so the image enlarges essentially) to fill it. The fast way to get around it is probably add white space at the bottom of the image just to give it sufficient height is not extensible / resize automatically. But it would be nice to know at least how to work around this problem in the code. Overall, I would say that the result in Firefox is closest to the desired solution, but of course it is not arranged things with IE8.

  Apologies for the long description, but which should at least provide much info for anyone who might have a possible solution for me. Essentially what would be great is if someone could advise me how to take the code of case 1 and apply it to a piece of 'background' coding as the type that is contained in html {...} in Case 2 . Like I said, it is almost there, but I just can't operate atm after trying to combine different bits of code this way and that... Also, if anyone has another version of html-css that works well to achieve then please by all means of let me know! V thanks a lot in advance!
  

  It works in modern browsers of the CSS3 support.  But not pre - IE9.

  http://ALT-Web.com/test/resizable-BG.shtml

  Nancy O.

• Get the usable screen size

  It is difficult to find and is OS specific.  But what I try to do is to get the size of the entire usable on all monitors.  By that I mean space would occupy a window, if it were made full-screen, but without having to do full screen.

  I have a user interface works this will popup a small window under the mouse if you perform an action, to view more information about what wriggle you on.  I want this window centered under the coordates of the mouse, but I want it fits the current screen, and I have not any visible window.

  So if my mouse is in the upper left corner of my screen, I want my window appear in the upper left corner, but have it all visible.  If my mouse is just above the taskbar, I want the entire window appears above the taskbar, but always under the mouse.  What I'm trying to avoid is poping up a window which is cut by clipping off the monitor, or under the taskbar.

  Display > property all monitors to get the boundaries of all monitors, but it's the resolution of the screen and doesn't take into account a taskbar which is likely on the bottom of the window, but potentially could be anywhere or could even be hidden.

  Any ideas on that?  My partial solution only I have not tried, but assume would work, is to make the hidden window, blow it up, get the bounds of the window, then it unmaximize.  Is there a feature that miss me?  Thank you.

  The use of knots of .NET:

  

  This first is System.Windows.Forms.Screen

  On my system (1920 x 1080), this refers to 1920, 1040.  My taskbar is 40 pixels high.

  Instead of choosing the 'PrimaryScreen", it has also a property"AllScreens', i.e. an array of screens. This will allow you to check each monitor on the PC.

• How do you get the Windows Image Acquisition (stisvc) service to restart?

  HP Pavilion DV6-2088dx running Win 7.0 64 Bit Ultimate

  When I try to restart the Windows Image Acquisition Service I get a message access denied (Services tab in the Task Manager) or an "error 1068: the dependency service or group could start" (in the Services window).

  Hello

  One thing to check is the following.

  Open windows control panel, open administrative tools, and then open Services.  Make sure that the following services (order of th specified below check them) are all showing that status = started and the Startup Type = Automatic

  Remote procedure call (RPC)

  Detection material core

  Windows Image Acquisition

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• get the Bitmap Image of the web site or remote location

  Hi, yesterday I asked for some ease of image horizontal scorlling with blackberry. It's work very well. Thank you for all.

  But I could not do my job. What I need, that I have to get the Image from a web site (not in the project of ths) and display it in the BB device. I can do this and I get byte array and show the image using BitmapField. But this installation of scrolling does not work with the bitmap field.

  Is is them possible to get my web site dynamic images of the Bitmap object?

  Here is the code that you sent me.

  // ------------------------------------------

  package com.falseflag.blackberry.recipes;

  Import net.rim.device.api.system.Bitmap;
  Import net.rim.device.api.ui.Graphics;
  Import net.rim.device.api.ui.UiApplication;
  Import net.rim.device.api.ui.component.Dialog;
  Import net.rim.device.api.ui.container.MainScreen;

  class ScrollingImageRecipe extends UiApplication {}

  private class ScrollingImageScreen extends form {}
  private static final int HORZ_SCROLL_FACTOR = 10;
  private static final int VERT_SCROLL_FACTOR = 10;

  Bitmap bitmap;
  int left = 0;
  high int = 0;
  int maxLeft = 0;
  maxTop int = 0;
         
  public ScrollingImageScreen() {}
  bitmap image = Bitmap.getBitmapResource ("test.png");
         
  If (bitmap == null) {}
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  Dialog.Alert ("Failed to load image");
  System.Exit (0);
  }
  });
  return;
  }
             
  If (bitmap.getWidth () > Graphics.getScreenWidth ()) {}
  maxLeft = bitmap.getWidth () - Graphics.getScreenWidth ();
  }
             
  If (bitmap.getHeight () > Graphics.getScreenHeight ()) {}
  maxTop = bitmap.getHeight () - Graphics.getScreenHeight ();
  }
  }
         
  protected void paint (Graphics graphics) {}
  If (bitmap! = null) {}
  graphics.drawBitmap (0, 0, Graphics.getScreenWidth (), Graphics.getScreenHeight (),
  bitmap, left, top);
  }
  }
         
  protected boolean navigationMovement (int dx, int dy, int, int time status) {}
  left += (dx * HORZ_SCROLL_FACTOR);
  top += (dy * VERT_SCROLL_FACTOR);

  If (on the left< 0)="" left="">
  If (upper-< 0)="" top="">
  If (left > maxLeft) left = maxLeft;
  If (top > maxTop) top = maxTop;

  Invalidate();

  Returns true;
  }
  }

  Public Shared Sub main (String [] args) {}
  ScrollingImageRecipe app = new ScrollingImageRecipe();
  app.enterEventDispatcher ();
  }
     
  {ScrollingImageRecipe()}
  pushScreen (new ScrollingImageScreen());
  }

  }

  //-------------------------------

  Please be so kind to give me a solution for this issue.

  You can use a browserfield to display web content in your application.  Take a look at the browserfielddemo provided with the BlackBerry JDE for example

  If you ask how to connect to a web site, please see the httpdemo.

  This example shows how to create a scrolling image field.

  -Creates a scrolling Image field
  Article number: DB-00681

  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800345/...

• InDesign ePUB - can't get the background image to flush vertical css borders

  Hello

  I'm testing my new found skills epub in InDesign CC2015. I'm working on a simple project which was originally for printing (pdf) and decided to make an epub version. I created an external css file where I included the left and right borders for aesthetics. These borders are growing and contracts vertically, depending on the amount of content exists on the page.

  The problem I've come across is if I have a picture as the last asset on the page, the image appears slightly higher than the lower part of the border (see screen shot on the left). It seems that it is a pixel or two higher. The pixelated graphic is anchored to an empty paragraph with a single non-breaking space character. The text block has no indentations, no space before / after values and auto leading together. Object styles have been created for the frame and a paragraph and graphic style has been made to the text. This happens for any image I load in the page and place it at the bottom.

  In the another screenshot, I have a block of text as the last element, and I get a perfect drop-in appearance at the bottom (turned to the right of the screen).

  I cracked open the epub and seen in Chrome html pages. I launched the F12 tools to see the HTML and css code and margin all values are reset to zero. I can't understand why this only happens for images and no text blocks. Anyone has an idea why this happens?

  

  I recently found the answer to my own question. I indicated that I was with a CSS file external to add some additional styles, mainly for vertical borders. After, I cracked open the ePUB, I opened the page html in Chrome and dug down to find the via F12 tools.  I pointed out the tag and took a glance at the corresponding CSS. There is no margin value so I added a img {margin-bottom:-3px ;} entry and it's the bottom of the image, run ras from the bottom of the border.} Then I went back to my file CSS external to the ePUB and added values. When you export to Adobe Digital Editions, I got the same desired results. The other images in the document may not be visually compromised this either so I think that's a wrap.