Get the UID of an object created from a script

Similar Questions

• Get the blue screen when you create a new message or the response message in OWA Exchange 2007

  Get the blue screen when you create a new message or the response message in OWA (Exchange 2007)

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.technet.Microsoft.com/forums/en-us/exchangesvrclients/

  It will be useful.

• I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.

  Change outlook web mail
  

  I'm going through webmail with cable cox to outlook or outlook express, but finds it difficult to get the emails to my wife separately from mine.  Not sure how they get along with the different email address.  I tried setting up separate accounts and profiles in outlook 2003 and have also tried to separate identities and accounts in outlook express 6.  Any help would be appreciated. TKS Joe Novick

  I can't speak for Outlook, even if it is very similar, but if you have configured the real separate identity in OE, as in needing to switch identities with it, avoid a problem unless you use both the same e-mail address.

  If you use different addresses to your identity, go to tools | Accounts and remove its identity. Vice versa in its identity.

  I use Cox and were three addresses in the three identities without problem.

• Is - is this legitimate? I get the following requires Windows Genuine Advantage from Microsoft Corporation: Validation status: Action required

  Is - is this legitimate?  I get the following requires Windows Genuine Advantage from Microsoft Corporation: Validation status: Action required
  The validation process cannot continue because your web browser is not configured to run the components required by the genuine validation process. The following will help you solve this problem and continue with validation.

  The information bar is shown below.

  1 1 clic click right on the information bar and select install the ActiveX (see below) control

  2. when the Internet Explorer security warning dialog appears, click on install.

  If the ActiveX control does not properly install, you can click on the button OK below to start the posting process replacement (optimized for browsers unable to perform the initial validation script).
  Is - is this legitimate?  I get the following message claiming to be Windows Genuine Advantage from Microsoft Corporation:
  Validate now state of Validation:

  It is valid only if the message comes from Microsoft.com

  Go to this Web site in Internet Explorer: http://www.microsoft.com/genuine/validate/

• Installed CC 30-day trial.  Getting the error "Lightroom can't create a catalog named"ightroom catalog on volume OC (c) because Lightroom can't save the changes to this place". Tried to "Choose a different catalog" same mistake several times.

  Installed CC 30-day trial.  Getting the error "Lightroom can't create a catalog named"ightroom catalog on volume OC (c) because Lightroom can't save the changes to this place". Tried to "Choose a different catalog" same mistake several times.

  Hello

  Try resetting preferences

  Note:-back up your Lightroom Catalog beforehand and save Photoshop preferences

  * Now reset preferences Hold Down CTRL + ALT + SHIFT (WIN) CMD + OPTION + SHIFT (MAC) while starting Lightroom. A dialog box appears prompting you to restore Preferences (LR)

  Once done open again Lightroom

  Make sure you have a lot of read/write of the location where you save the catalog... To create a folder on your desktop, confirm, then try to create the catalog again it

  I would like to know if there is a question...

  Thank you

  Assani

• Get the ID of a dynamically created symbol library, inside another symbol.

  Hello world

  I'm trying to get the id of a dynamic created symbol library.

  When you dynamically create the symbol directly on the stage (or the level of the composition), there is no problem.

  But I can not function when you create the symbol inside another symbol.

  A few examples using 'getChildSymbols()' and 'aSymbolInstances '.

  // USING "getChildSymbols()" /////////////////////////////////////////////////////////////////////////

  ON THE STAGE

  var m_item = sym.createChildSymbol ("m_item", "Stage");

  var symbolChildren = sym.getChildSymbols ();

  console.log (symbolChildren [0] .getSymbolElement () .attr ('id')); / / ok eid_1391853893203

  / / Inside a SYMBOL OTHER

  var m_item = sym.createChildSymbol ("m_item", sym.getSymbol("holder").getSymbolElement ());

  var symbolChildren = sym.getSymbol("holder").getChildSymbols (); / / I use this maybe wrong?

  console.log (symbolChildren.Length) / / returns 0 if can't ID is

  ' USE 'aSymbolInstances "".

  ON THE STAGE

  var m_item = sym.createChildSymbol ("m_item", "Stage");

  console.log(sym.aSymbolInstances[0]); / / ok (I guess) x.fn.x.init [1] 0: #eid_1391854141436 div

  / / Inside a SYMBOL OTHER

  var m_item = sym.createChildSymbol ("m_item", sym.getSymbol("holder").getSymbolElement ());

  console.log (sym.getSymbol("holder").aSymbolInstances [0]); / / Error Javascript in the event handler. Type of event = element

  In this post http://forums.Adobe.com/message/5691824 is written: "mySym.aSymbolInstances will give you a table containing all the 'names' when you create symbols"

  Would be - this only works on the scene / composition level only and not inside a symbol?

  The following methods to obtain the same are indeed possible, but I do not simply want to use them in this case:

  (1) storing a reference to the symbol created in a table and call it later by index.

  (2) giving the elements an ID manually on the creation and use of document.getElementById () thereafter.

  I can't believe that this is not possible. I am probably missing something here.

  Forgive me that I am a newbie using Adobe Edge!
  I really hope that someone can help me here.

  Anyway, thnx in advance people!

  Kind regards

  Lester.

  OK, I solved my problem by using the (simple) code below.
  I guess that 'getChildSymbols()' and 'aSymbolInstances' only works on stage / level of the composition.

  Just thought I'd share this to everyone. Peace!

  var m_item = sym.createChildSymbol ("m_item", sym.getSymbol("holder").getSymbolElement ());

  $.each (sym.$("holder").children (), function (index, obj) {}

  Console.log ($(sym.$("holder").) ([Index] Children()) .attr ('id'));

  });

• [cs5 - JS] How to get the UID

  Hello

  is it possible to get the UID of the selected pageItem? I get the point/selected items is not a problem, but I can't get the user ID of the selected item.

  Thank you

  alert (app.selection[0].id);
  

  What seems to be the problem?

• How can I get the second and third highest salary from the emp table

  How can I get the second and third highest salary from the emp table in the ecah Department

  SQL> ed
  Wrote file afiedt.buf
  
    1  select empno, ename, sal, deptno
    2  from (
    3    select empno, ename, sal, deptno, dense_rank() over (partition by deptno order by sal desc) as rn
    4    from emp
    5    )
    6* where rn in (2,3)
  SQL> /
  
       EMPNO ENAME             SAL     DEPTNO
  ---------- ---------- ---------- ----------
        7782 CLARK            2450         10
        7934 MILLER           1300         10
        7566 JONES            2975         20
        7876 ADAMS            1100         20
        7499 ALLEN            1600         30
        7844 TURNER           1500         30
  
  6 rows selected.
  
  SQL>
  

• ID field implement in ADF entity object created from Interface of Service BC

  I guess you guys as the gurus of the ADF have already known the simple trick to use the DB sequence to automatically generate the value of the ID of an entity object.
  This, however, only works if the EO is created directly from the database schema. In my case, the EO is in fact derived from view VO object that is exposed through the service BC of another application interface.
  How can I get the same operation as in the first case?
  
  The example I'm getting is very simple. In app A1, I LocationEO1 with create (...) of overridden method to automatically generate the code. His LocationVO1 is used for presentations to the A2 application service. In A2, LocationEO2 and LocationVO2 are created. But I don't know how to make the field LocationId having the next sequence value whenever I click on the button Create or CreateInsert.

  Sorry, I don't understand your point. The sequence is used in the application, you create the new row. So if you call a web service to get a new line, the web service should return a line with the id. You can't fronn id in another application that you do not know where is comes from.
  If you want to create the new row outside the application that exposes the web service, you can implement another method in the service interface that gets you a unique id in the sequence that you so is PK for the new line.

  Timo

• How can I get the contents of an object of Document (XMLDOM) in a string variable?

  Hello

  I created an XML document by using the Document and XMLElement classes and now I need to get the XML object and a string variable, so I can send by e-mail.

  I'm on 4.5 JDE

  Help!

  Hello

  Unlike some other posts, there is a solution.

  Document myDocument = pdocXMLDocument;  / * This is the document that you created that you want to convert to a string

  ByteArrayOutputStream OS = new ByteArrayOutputStream(); / * where you want the XML to go * /;
  XMLWriter writer = new XMLWriter (os);

  configure as you want using one or more of:
  writer.setPrettyPrint (); or setPrintCompressedOutput();
  writer.setPrintCompressedOutput ();
  writer.setPreserveSpacing ();
  writer.setExpandingEntities (boolean);
  writer.setEntityResolver (EntityResolver);
  try {}
  DOMInternalRepresentation.parse (pdocXMLDocument, writer);
  String myXML = os.toString ();        THIS IS THE STRING
  }
  catch (Exception ex) {}
  }

• Get the 500 error trying to create a table using the REST API

  Hello

  I tried to create a table using the REST API for Business Intelligence Cloud, but I got 500 Internal Server Error for a while now.

  Here are the details that I use to create a table.

  

  and the json to create the schema that I use is

  [{'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ["ROWID"]}]

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['RELATIONID']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['ID']}

  , {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['RESPONDEDDATE']},

  {'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [255], 'columnName': ['RESPONSE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_CREATEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_CREATEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_LASTMODIFIEDDATE']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [18], 'columnName': ['SYS_LASTMODIFIEDBYID']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['TIMESTAMP'], 'precision': [0], 'length': [0], 'columnName': ['SYS_SYSTEMMODSTAMP']},

  {'Nullable': [false], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [10], 'columnName': ['SYS_ISDELETED']},

  [{'Nullable': [true], 'defaultValue': 'dataType' [null],: ['VARCHAR'], 'precision': [0], 'length': [50], 'columnName': ['TYPE']}]

  I tried this using postman and code, but I always get the following response error:

  Error 500 - Internal server error

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.5.1 500 internal Server Error The server encountered an unexpected condition which prevented him from meeting the demand.

  I am able to 'get' existing table schemas, delete the tables, but I'm not able to make put them and post operations. Can someone help me to identify the problem, if there is no fault in my approach.

  Thank you

  Romaric

  I managed to create a table successfully using the API - the only thing I see in your JSON which is different from mine is that you have square brackets around your values JSON where I have not. Here is my CURL request and extract my JSON file (named createtable.txt in the same directory as my CURL executable):

  curl u [email protected]: password UPDATED h x ' X-ID-TENANT-NAME: tenantname ' h ' Content-Type: application/json '-binary data @createtable.txt https://businessintell-tenantname.analytics.us2.oraclecloud.com/dataload/v1/tables/TABLE_TO_CREATE k

  [

  {

  'columnName': 'ID',

  'dataType': 'DECIMAL ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': false

  },

  {

  'columnName': 'NAME',

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'STATUS."

  'dataType': 'VARCHAR ',.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  "columnName': 'CREATED_DATE."

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  },

  {

  'columnName': 'UPDATED_DATE ',.

  'dataType': 'TIMESTAMP '.

  'Length': 20,.

  "accuracy": 0.

  'Nullable': true

  }

  ]

• How to get the inline query which is drawn from the TAB specific Application.

  Hi all I use 10.2.0.4.0 oracle version.
  
  I want to capture the sql that is raised in my prod database when an applicaton tab is hit as it takes about 5 minutes for the tab to be loaded. So is it possible, for the inline sql, which is the origin of the problem, directly from the prod environment.
  
  (Note: I looked through the browser session in PROD DB for the query, but there, I found a lot of meetings and a lot of requests, I do not know how to distinguish the session being created by the specific tab I hit).

  >

  Hello

  I want to capture the sql that is triggered to my database of prod
  When an applicaton tab is hit as it takes about 5 minutes so that the tab
  to be loaded. So is it possible to get the inline sql, which is
  the origin of the problem, directly from the prod environment.

  Please, please tell us that you have a Test environment? Log into that, then run a trace.
  No doubt you can either descend all test for a few miinutes and/or
  easily distinguish sessions on your Test System? That's exactly what the test
  the environments are for.

  The SQL execution will be the same - you can go try to find
  the root cause of the problem.

  HTH,

  Paul...

• How to get the class of an object in HTML5?

  In Actionscript, you can write:

  If (the object is myClass) {...}

  I get the easeljs

  'lib.myClass'.

  When I m logging to the console, but somehow the comparison doesn t work

  if(Object == lib.) MyClass) {//never true}

  If (Object instanceof lib. MyClass) {/ / works}

• Seeking help with a problem with the LR I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message, "could not create a JPEG sponsor limit you 92 k Bytes.Plea.

  Seeking help with a problem with the LR

  
  

  I use LR CC on a laptop, when you try to export a picture to an external hard drive, I am now without apparent reason to get the following message.

  "Could not create a respondent JPEG limit you 92 k Bytes.Please increase the size limit files
  . (1).
  .....

  I tried to increase the size of the file several times,

  I left LR

  I restarted the computer.

  
  

  Any help or advice for this problem will be greatly appreciated

  
  

  Thanks in advance

  
  

  @stu

  Not because of the number of pixels, in this photo and the chosen level of quality there is no possible way to create a JPG file to the size of file you requested. You must change your export settings.

  Show us a copy of the export dialog box, so we can see clearly the part file setting and the size of the Image.

  Also indicate the number of this image (width and height) pixels after cropping (as appropriate) and prior to export.

• Does not receive the table name in the list of schema objects creating EO

  Hello

  IAM does not have my name of the table custom in the list of schema objects during the creation of EO.

  I created a custom table and I need to use this table looks for creation EO,

  But while creating the EO, I'm not able to find the table in the schema object list.

  in the connection database, these tables are present, but only in this window (window of creation of Eo) these tables do not come

  can someone please help how to solve this problem.

  Hello

  I found the solution

  in business components that there is another database link that I've changed now, it works fine now