Have a problem to add file icon

Similar Questions

• I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe.

  original title: problem with file ntsd.exe

  I just did a check of norton power Eraser which revealed that I have a problem with the file ntsd.exe. Does anyone have suggestions about what to do to fix it? Thank you very much.

  Hi JohnABuckley,

  • Are you facing any problem on the computer?

  Ntsd.exe is a process belonging to the Microsoft symbolic debugger that lets you debug applications in user mode.

  As the link below, it says that there is a risk that Norton Power Eraser can select some legitimate programs for removal. You should carefully review the analysis results page before deleting the files. I suggest that you don't delete the file unless you are facing problems with the computer.

  https://www-secure.Symantec.com/Norton-support/JSP/help-solutions.jsp?LG=English&CT=us&docid=20100824120155EN&product=home&version=1&PVID=f-home

• I have a problem with the files of the sfc or not?

  I ran sfc/scannow times a few / several times since a few days and get the same results below... 2 files 'can not fix.

  Of sfcdetails.txt:

  2014-01-03 02:03:48, 000002f9 CSI Info [SR] verification complete
  2014-01-03 02:03:48, 000002fa CSI Info [SR] 1 repair of components
  2014-01-03 02:03:48, CSI Info 000002fb transaction [SR] beginning verify and repair
  2014-01-03 02:03:48, Member records can not repair of Info CSI 000002 fc [SR] [l:18 {9}] "MSDTC. JOURNAL"of the Microsoft-Windows-COM-DTC-Runtime, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, neutral public key in the store, file is missing
  2014-01-03 02:03:48, 000002fd CSI Info [SR] cannot repair the military record [l:18 {9}] "MSDTC. JOURNAL"of the Microsoft-Windows-COM-DTC-Runtime, Version 6.1.7600.16385, pA = PROCESSOR_ARCHITECTURE_AMD64 = (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, neutral public key in the store, file is missing
  2014-01-03 02:03:48, 000002fe CSI Info [SR] this element is referenced by [l:202 {101}] "Microsoft-Windows-Foundation-Package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.7601.17514.WindowsFoundationDelivery '.
  2014 01-03 02:03:48, info CSI 00000300 [SR] repair complete
  2014-01-03 02:03:48, info CSI 00000301 [SR] validation of transaction
  2014 01-03 02:03:48, info CSI 00000305 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully

  The reports show 2 almost identical files... but the last line States report... "repaired all the files and registry... keys. »

  2014 01-03 02:03:48, info CSI 00000305 [SR] check and complete repair operation. All files and registry listed under this operation keys were repaired successfully

  But if I run the utility again, the same results are presented. Can I have a problem or not?

  If I have a problem I get 'lost' in the sfc files manually fix as described in http://support.microsoft.com/kb/929833/en-us

  Waiting... Thank you

  GTS - NJ and Yann...

  I did a restore Image today, any return works correctly. Thank you for your time and help

• I use windows xp, I have a problem of the file conversion vlc m4as in mp3 and download videos from the net...

  I use windows xp.  I can't convert the m4as vlc mp3 files, or similar, so that i can burn it to disc and sync with my portable mp3 player.  Also, I would like to download videos on the net, how do I do this safely? (I recently downloaded some malicious programs).  A simple step-by-step guide would be appreciated.  Thank you very much.

  I use windows xp.  I can't convert the m4as vlc mp3 files, or similar, so that i can burn it to disc and sync with my portable mp3 player.  Also, I would like to download videos on the net, how do I do this safely? (I recently downloaded some malicious programs).  A simple step-by-step guide would be appreciated.  Thank you very much.

  ========================================
  You * still * trying their luck downloading media
  files on the net... I don't think it's impossible to guarantee
  that no problem will occur.

  That said... the following free software may be useful:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake - Free Audio Converter
  http://www.Freemake.com/free_audio_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  When you have installed Freemake... Open Freemake
  and drag and drop your audio files on the main screen.

  Or... Click left on the Audio button, then navigate to the
  your audio files are saved in the folder.

  Select (highlight) the files you want to import into
  Freemake and left, click on the button 'open '.

  When your audio files are imported into Freemake,
  On the left, click the MP3 icon at the bottom of the screen.

  The "Output settings" screen opens.  Choose
  ' Save in ' file so you can find the converted files.

  On the left, click the "Convert" button and the files must be
  converted very quickly.

  This should make 23 for a downloader...

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Video Downloader
  http://www.Freemake.com/free_video_downloader/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake - how to download the video for free
  http://www.Freemake.com/how_to/how_to_download_video_free

  Freemake - how to download TV shows online
  http://www.Freemake.com/how_to/how_to_download_online_tv_shows

• I have a problem with the files and folders on the comouter.

  Original title: files and folders to HELP you!

  Hello world

  I have never used before, so please bear with me!
  I really hope someone can help out me.
  I've never had a problem in 8 years when it comes to rename JPG files (or any files also), but a few minutes ago, I went to rename some of them, and I got the following error message: "If you change a filename extension, the file may become unusable.  "Are you sure you want to change it?"
  I have NEVER seen that before and I looked and can't find anything around him.  I noticed that all my files now have the letters "JPEG" at the end of their.  I don't know what is happening.  Any help you can give me would be greatly appreciated!
  Thank you and good night!
  (I use Windows XP 32-bit).

  Thank you very much for your quick response.

  However, I found by Google how to solve this problem, and he took every 15 seconds!
  It was just a box which should have been verified but was not.
  Thanks again!

• Impossible to copy .vmware bundle on network drive (super slow).  Do not have this problem with other files.

  I'm just copying my pack of Windows 7 .vmware to a network drive so that it is saved.  It's only about 7 GB (expanding) and is divided into segments of 2 GB hard drive (the default installation option).

  When I try to copy the file via the Finder, he said something ridiculous like 9 hours left!  I have a GB 30 Parallels VM I created (fixed size disk and do not divide into 2GB pieces) in the evaluation of Parallels and I can copy this whole file back on the network in one hour.

  What gives?  Anyone have any ideas why I can't copy this particular file in a reasonable amount of time?  The virtual machine has been stopped (except some services run in the background on the start of OS X) and the host has restarted several times without success.

  Thoughts?

  Thank you!

  1 stop, suspend, not from inside Windows Virtual Machine target.

  2. on the Virtual Machine library Windows ctrl + click on the target of the Virtual Machine and select Show in Finder, and then close merger.

  3. in the Finder, ctrl - click on the target Virtual Machine package and select to display the contents of the package.

  4. in the Finder, delete the Applications folder from the target virtual machine package and then empty the trash.  (To be noted that the Applications folder within the target virtual machine package will be recreated as necessary).

  5. now try to copy the target Virtual Machine package.

• Please advise: I have a problem displaying RAW files correctly on Lightroom. The thumbnails look good before the import, but once that Camera Raw is applied when importing they turn green and are cropped. I'm shooting to the CR2 format using custom white

  

  

  HannahMahassen wrote:

  Open the images in iPhoto gave correctly colored final images.

  iPhoto is only to display and to use the preview JPEG embedded within the raw file.

  https://support.Apple.com/en-us/HT202428

  HannahMahassen wrote:

  Unfortunately, the toolset is not so advanced that LR would prefer being able to edit my photos out there. Any suggestions as to why it cannot interpret the correct values in files? Camera Canon G15 btw.

  If you use the auto white balance setting in the camera it is remove the Green tint in the embedded preview raw file (JPEG files). LR White Balance tool is more limited in range compared to the correction of the White Balance in the camera. On your screenshot posted the tint WB slider is set to 150 (Magenta), but clearly it is not sufficient to correct the under cast of green water. You can create a custom profile of DNG to extend LR Temp WB and range of hue as shown here:

  Lightroom: Setting the white balance for underwater photography

  One of the Green images issued by export to the DNG format and open it in Adobe DNG Profile Editor. The corrections described above and then name and save the new DNG profile in below the location of the folder. Restart LR to load the new profile of the camera.

  Lightroom 4, 5, 6 and CC

  Windows Vista through 10

  C:------users------[your user name]-AppData-Roaming------Adobe------CameraRaw------CameraProfiles------.

  Mac

  Macintosh HD / users / [username] / Library / Application Support / Adobe / CameraRaw / CameraProfiles /

  Lightroom 1, 2, 3

  Windows XP

  C: \ Documents and Settings------all users------Local Settings------Application Data------Adobe------CameraRaw------CameraProfiles------.

  Windows Vista or 7

  C:------ProgramData------Adobe------CameraRaw------CameraProfiles------.

  Mac

  Macintosh HD / Library / Application Support / Adobe / CameraRaw / CameraPro! them.

• Problem with the desktop icons

  I have the problem with the desktop icons... they come from both sides... one above the task bar and on the other hand under the task bar too... I'm unable to remove those who are below the taskbar.

  Hello

  You can try following the steps provided below and check if this can help, make sure that closing all open programs:

  (a) the Task Manager open by right-clicking on the taskbar

  (b) in the process tab, right-click on "explorer.exe" and complete the process

  (c) screen will be blank, except for the Task Manager.

  (d) open the file - new task (run)

  (e) enter "explorer.exe" click OK.

  If the problem persists, try to create a new user account and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  See also: http://windows.microsoft.com/en-us/windows-vista/fix-a-corrupted-user-profile

  Hope this helps,

• I need to install biee_windows_x86_101341.zip, I have a problem

  I download the biee_windows_x86_101341.zip file, but when I try to unzip with WINAR I have a problem that my file is not an archive valid. Some did this archive valid for me to install Oracle BI Enterprise Edition?
  
  
  
  TKS,

  First of all, do not use WinRar for Zip archive, use WinZip. Secondly the most probably cause of that error is that the download was canceled and that the file is corrupted. Try to download the file again by using a download manager that supports downloads from recovery in case of your Internet connection. FireFox has one, so try using FireFox.

• When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix i

  When I add text to an image that starts as a RAW file, I have no problem. When I try to add text to an image that is only a jpg file, the size of the text is extremely low. Even when I change the the font size to 72 pt, it is always small. How can I fix it?

  You set the font size to a size that is suitable for the size of the document.   Size of the document may vary everywhere.   To resolve this problem in action, I solved in scaling the document to a known size then use a font suitable for a document of this size.  When you resize an image using size with resample Images not only checked a single pixel is change everything that is changed is the DPI image resolution setting.  So if you size a picture 8 "wide you choose a font size is good for wide image 8" the Save action.  To work around the problem of changing the size of the printing I wrote a Script to use in such an action.  The script is used twice, there is a backup and restore script.   The first time that the script is used the script records the resolution DPI images in the metadata documents.  The second time that the script is executed, it retrieves the registered PID parameter deletes the record of metadata from images and set the DPI images that had been saved.    If the use of fonts for the document 8 "will be resized to fit the print original size.

  In a script, you can calculate a correct font size to use.  Actions cannot retrieve information or use logic. They need to use the Plug-ing and Script where logic is needed.  When you make using Photoshop UI you use your eyes and brain.

  Package of shares of crafts UPDATE August 10, 2014 added conditional measures Action Palette tips.
  Contains

  • Action Actions Palette Tips.txt
  • Action creating Guidelines.txt
  • Action dealing with Image Size.txt
  • Strengthened through scripts functions.txt Photoshop action
  • CraftedActions.atn sample Action set includes an example of Watermarking action
  • Sample Photoshop Actions.txt CraftedActions the value stored in a text file.
  • More then a dozen Scripts for actions

  Example of
  Download

• I have a problem while adding my gmail account, the steps I took 1) mails, contacts) 2 Add County 3) Google icon the problem here is when I type icon Google I don't get fed details with screen and return to the screen of icons Google only. Please guide

  HI the phi I problem just add my iPad from gmail account. The steps that I follow as

  (1) mails, contacts

  (2) add an account.

  (3) Google icon

  the. Problem is when I type icon Google is s arching i. Google Gmail accounts and return on Google only icon. I get no opportunity to be fed my email and password details.

  PL help and guide in this regard

  Helle k

  suryakonanki wrote:

  HI the phi I problem just add my iPad from gmail account. The steps that I follow as

  (1) mails, contacts

  (2) add an account.

  (3) Google icon

  the. Problem is when I type icon Google is s arching i. Google Gmail accounts and return on Google only icon. I do not get option be fed my email and password details.

  PL help and guide in this regard

  Helle k

  you will not be 'fed' coordinated - you must ENTER.

  do you get the 'FORM' referred to in step 4? > http://www.dummies.com/how-to/content/how-to-add-your-email-account-to-your-ipad .html

• I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error?

  I have a problem on my windows xp sp3 operating system when I right click any icon I got accident error? This is the summary of errors:

  AppName: explorer.exe AppVer: 6.0.2900.5512

  > ModName: ModVer shellext.dll: 4.0.468.0 Offset: 0000ca 93
  Please help thanks :D

  This problem is likely to make for an extension of the shell badly installed on your machine.  The way to solve this problem is to download and install the free software "ShellExView".  When you run this program, it displays all shell extensions that are installed on your machine with a checkbox next to it.  By unchecking the box, you can disable this particular shell extension.  By trial and error, you can find the one that is causing your problem.  Once you find it, the solution is usually apparent (usually UN-installing and re - install an application associated with this file extension).

  ShellExView: <> http://download.cnet.com/ShellExView/3000-2094_4-145729.html >

  HTH,
  JW

• I have to remove the duplicate files, but having problems by selecting more than one file in the player at the time.

  I have to remove the duplicate files, but having problems by selecting more than one file in the player at the time. How can I select multiple files at the same time so I can just delete them. I used to be able to do this in previous versions of Media Player, but this function seems now blocked or unavailable. The problem is this: through previous use of media player, it plays all my multimedia files several times whenever a device support has been added. He would try to save the files on my main drive, but since there is not enough room this would save the files somewhere else. This happened several times, I suppose, because when I upgraded my computer and a media scan was conducted he found duplicates of all my media various times of at least 6-8. I've consolidated since my plates on 3-disc multi to, but have now records duplicated hundreds and thousands of duplicate media files. Previous versions of Media Player would allow me to select all files and then delete them both of the reader, but also from my hard drive. So now I'm stuck with more than 300 GB of duplicate media I have to search line by line through all my hard drives to find each duplicate both, unless I can get media player to do what it can. Any help in this area would be appreciated.

  Hello

  1. did you of recent changes on the computer?

  2. is Windows media player files in double creation during playback of music files?

  To delete duplicate entries, click on another feature tab in the drive (for example the current playback), and then click library.
  
  If this does not remove duplicates from your library, you can use the Add to library dialog box to search computer to analyze a file on your computer the duplicate entries not valid-pointing. The player will remove invalid entries in your library that point to files that no longer exist in the folder.

  Complete the steps above for files that are stored in the hard disks.

  Method 1: Use the add to Library dialog box search for computers

  (a) start Windows Media Player.
  
  (b) press F3 on your keyboard to open Add to the library of the find computers dialog box.

  (c) click the Browse button to locate the folder on your computer so that your library contains invalid entries. Specify the location of the folder in the box look in.

  If you are not sure what duplicate in your library entry is not valid, you can add a path column to display in your library. Specify the folder on your computer that corresponds to the path not valid file displayed in your library.
  
  (d) click on the Search button.

  The player will search for digital media files and playlists in the folder that you specify and remove invalid entries in your library that point to files that no longer exist in the folder. If not valid in double entries point to other folders on your computer, repeat this procedure, specify a different folder every time.

  If only a small number of duplicate entries exist, you can delete those invalid manually by right-clicking on the invalid entry, and then clicking Delete .
  
  For large double-number of entries in your library (or if all your library is duplicated), it might be better to create a new library and delete the files.

  Method 2:

  After you remove the duplicate entries, run the troubleshooting of Windows Media Library settings to solve this problem.

  Open the troubleshooter in Windows Media Library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

  Let us know the results.

  I hope this helps.

• Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the th

  Hello, I have a problem with Mozilla Firefox 14 and now also Firefox 15. When I click on .html files on my desktop, firefox will open a new window twice. Where is the problem? Thank you

  That may be a problem with the DDE.

  Try to undo and redo Firefox as default browser.
  
  Make a different browser like IE browser by default and then let Firefox do it again.
  
  See:

  • http://KB.mozillazine.org/Default_browser
  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• I have a problem bookmarking websites, I do not see the folder I chose to add them.

  I have a problem bookmarking websites, I do not see the folder I chose to add them.

  You would need to double click on the STAR on the bar of address and then choose the FOLDER, wanted to bookmark the link.