Help! New 1606dn Laserjet Pro prints multiple copies (unwanted) (using Hello)

HI - just hung a new impressive 1606dn of Laserjet Pro.  I use an Airport Express Terminal to hang it on a home wireless network. I got a HP Laserjet 1012 hung in the same way and it worked fine.  I am able to find and set up the new printer via Bonjour my Windows 7 laptop and desktop, but when I print a document it prints several copies at all times (for always if I left it): the document does not queue!

Any ideas?

Thank you!

Without a doubt!

Tags: HP Printers

Similar Questions

  • LaserJet 1320: Print multiple copies

    Regardless of the number of copies I specify to print on my Laserjet 1320, it will only print one copy. I use Word 2010, Windows 8.1

    I suspect that the following is the case:

    • Your document is a MultiPage document (i.e. not just a single page).
    • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
    • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
    • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that the LJ1320 supports one of these.

    You can confirm that the foregoing occurs by:

    • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
    • Then examing initially file resulting .prn (you should be able to open it in Notepad).
    • Most of the file can be unintelligible, but initially will look like:

    If the command SET QTY is there, this confirms that the driver think the printer will make copies.

    If so, check the settings of the device to the printer:

    to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

    If the disk hard printer is set to installed, change to not installed.

    If the Mopier Mode is set to Enabled, change it to disabled.

    Then repeat the tests to see if it makes a difference.

    He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

  • OfficeJet Pro 6830: Can't print multiple copies with my new 6830 Pro of Officejet

    I installed my 6830 and have updated the drivers.  It is on my home wifi network and works well.   All functions work perfectly, but when I try to print multiple copies by selecting the number of copies in the print dialog in Adobe Reader, MS Word and MS Excel, all I get is a copy no matter how much I said.  (This is probably true of other software, too, but these are the only ones I've tried so far).  This makes print multiple copies very tedious.

    Why it won't print multiple copies, and how to fix it?

    Welcome to the HP community @JoetheGOM ,

    I read your post about how you cannot print multiple copies of your Mac 10.7, running to your Officejet 6830. I have some suggestions for you below!

    Try these steps in order:

    1. Reset the printing system
    2. Repair disk permissions
    3. Restart the Mac.
    4. Install the complete driver here: HP Officejet Pro 6830 e-all-in-one printer
    5. Repeat your impressions.

    If you cannot always make several copies, try posting this question in Apple Support communities.

    Have a great Monday

  • OfficeJet 5740: Windows 7 Officejet 5740 prints multiple copies of Excel (2000)

    Nine Officejet 5740 e-all-in-one printer connected to the Acer PC under Windows 7 Pro (64 bit) SP1. Printer driver 17.59.00.6180

    Will not print multiple copies of a small document (2000) Excel (128kb)

    Print large files PDF and Word and several copies, but not from Excel (2000)

    It will be wound up to two (maybe three copies) but displays only the first and then fails with the Excel error message "your file could not be printed due to an error on HP Officejet 5740 Series (network) on Ne01...". »

    Followed by the HP error message «Unable to communicate with the printer...» »

    I think it must have something to do with the way Excel print multiple copies queued several unique copies that print spooler one by one. It feels as if the spooler is being overwhelmed by the simple copies repeated being pulled on her by the Excel print routine.

    Any advice appreciated

    Greetings @tessdesigns,

    Thank you access the Forums from HP Support for extra support! I see that you have problems printing multiple copies of Excel. I will do my best to help you with this problem.

    The application you are printing from, go to file, print, number of copies, select 2. Uncheck the Collate box. You can now change the number of copies. Collate should now stay disabled.  Try to reprint the document of several pages.

    If the problem persists, perform a clean boot on the computer and disable the Antivirus software. How to perform a clean boot in Windows. Then try to reprint the multiple documents.

    If this helps you to find a solution, please click on the button "accept as a Solution. If you wish, to say thank you for my effort to help, click on the 'Thumbs Up' to give me a Kudos. Please let me know the results. Good day!

  • Color Laserjet M252N: HP Color Laserjet Pro printer M252N for Windows XP Embedded Standard.

    I can't install the driver HP Color Laserjet Pro printer M252N to my machine (OS: Win XP Embedded Std version) without an internet connection.

    1 error message are requested in advance for MS .net framework 3.5. (after that, I download and installed: NETCFSetupv35.msi)

    I found the name of the printer in the list of drivers, but then I try to add a new printer with this driver, the pop-up error message and the installation is not complete.

    My question is: the HP Color Laserjet Pro printer M252N are not compatible with Win XP Embedded Std?

    Please help, even the HP sales technician unable to answer me to this questation.

    Hello

    The HP Color Laserjet Pro M252N Featuer software complete is not supported on Windows XP, however you can get the features of the printer using HP PCL 6 Universal Print Driver listed on page 9 of the User Guide, be aware that the Service Pack 3 must be installed on the operating system to use the printer:

    Make a right click my computer and select Properties - locate Service Pack 3 in this form... If Service Pack 3 is not the operating system MUST be updated first:

    http://h10032.www1.HP.com/CTG/manual/c04475955

    You can download the HP Universal Print Driver below:

    http://ftp.HP.com/pub/softlib/software13/COL39348/LJ-95977-14/UPD-PCL6-x32-6.2.1.20636.exe

    As Windows Embedded edition is an edition of the customized version no official support is guaranteed.

    It is a customized operating system version includes only the components of the operating system selected for specific needs.

    Those selected by the OEM computer and not necessarily include any component required by the HP software or hardware.

    Try to install the printer and see if this can work, however it can work as explained and may not only the manufacturer of the computer can respond if such material can be installed on the operating system or not...

    Kind regards

    Shlomi

  • Cannot print multiple copies of Word or Adobe

    Cannot print multiple copies of Word or Adobe (although Notepad works very well, she accepts the demand for multiple copies)

    Windows 7 Ultimate

    This is the next thing I tried...

    HP Laserjet M1005 MFP printer

    Problem: print one copy and ignore the rest of them

    1 mopier moye... There is no mode mopier on my device

    2. adjust the printer to print directly.

    3 re install the driver

    4. update the firmware

    5 restart the spooler and in her service automatic setting

    6 deactivation of advanced print

    7. buy a new printer

    My new printer is Canon LBP 3300

    Problem: His little different than Hp, now when I try to print multiple copies, it does print none of them...

    The two printer works fine with other computers.

    Hi Nitin,

    You mentioned that the mopier mode setting is not available for the printer. You can check if there is a possible working storage?

    Here's how to find one:

    • Select StartControl Panel<>Printers.
    • Right-click the desired printer icon and select printer Properties.
    • Select the device settings tab.
    • Find settings for storage of the work at the end of the list. (Check if the mopier mode is available in this setting. This setting could also be under "Installation Options").
    • Change the settings for active to disabled.
    • Click apply and OK.

    Check out these links for other procedures for troubleshooting related to the issue:

    http://h30434.www3.HP.com/T5/other-printing-questions/LaserJet-won-t-print-multiple-copies-on-Windows-7/TD-p/181367

    http://h30499.www3.HP.com/T5/printers-LaserJet/LaserJet-1320-not-printing-multiple-copies-anymore/TD-p/1125929#.U9eO3eOSx0U

    You can also disable ranking for the printer:

    1. Go to file > Print > collate box.
    2. Uncheck the box for the collate box.

    In addition, when you try to print a document, launch the document in administrator mode. For example: right-click on the word and select run as administrator of mode.

    Please let us know if the problem still persists.

  • Cannot print multiple copies from Excel. Also impossible to update HP driver. The update of the Microsoft HP driver fails to install.

    Windows 7 + Office 2007 with HP 1200 LaserJet printer: unable to print multiple copies of Excel documents.  Also impossible to install the update from the HP Microsoft driver.  Windows Update indicates the updated driver available... but fails to install.  Everything was stable and works very well.  All other printing works very well (including multiple copies from other programs like Adobe etc).

    Any help will be appreciated.

    Hi Rolloutman,

    ·        What happens when you try to perform multiple copies of Word?

    1. to narrow down on the issue, I suggest you to print several copies of a Word document or notepad.

    2. provide the error message or error code for the problem to install the updated driver, follow these steps:

    i. Click Start, in the search box, type in update

    II. click on windows Update

    III. click view update history

    IV. double-click Update failed

    3. update the printer driver to manually. Steps to update the driver:

    i. click on start, type devmgmt.msc and then on enter.

    II. develop the printer and right click on the sub element and click on update driver.

    Link for reference:

    http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

    You can also check out the link below:http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=29790&locale=en_US&taskId=135&prodSeriesId=29789&prodTypeId=18972

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • Print multiple Copies per Page?

    All I want to do is print multiple copies per page.  I use the parameter "Borda (x 4)" in the Canon Print Studio Pro software.  I can see how in 6 of Lightroom, but my son is running only Digital Photo Professional 3.14.48.1 with a Pixma Pro-100.

    All we get is just an impression in the top left corner of a landscape layout.  We use paper 13 x 19 and can print images of size on the paper without problem.  All we want is to print multiple copies of the same image on a single sheet.

    You can use My Canon Image Garden (free download)

  • HPC309, print multiple copies, even if only is selected.

    HPC309, while a printer, print multiple copies, although only is specified.  MOM has Windows vista 32 bit.  I had found the answer here for printer to my mother a few years ago, but think that my niece may have changed the settings I applied the solution that had been posted here.  The solution offered of course worked all these years and now must go MOM up and run again.

    I think it had something to do with the implementation of a HPC309 (2) or something along that line.

    Thanks for any help you can give me.

    Uncheck the box "Enable bidirectional printing" on the C309 properties Ports tab.
    Go to the Printers folder - right-click on the printer - in the menu drop down, right click on printer properties

  • HP 4630, how to print multiple copies of a picture on a single page

    I have a Toshiba laptop with Windows 7 and a HP 4630.  I want to print multiple copies of a picture on a full page.  What HP application need me it, and how I put in place?

    Hi Dore71,

    Welcome to the HP Forums!

    I see you try to print multiple copies of a picture on a full page.

    I recommend you take a look at this web site. Picture printing: frequently asked questions.

    Hope this information helps and have a great day!

  • Photosmart D 110: Print multiple copies

    When you print multiple copies, it takes a lot of time between the copies.  I'm queue and print immediately.

    Would like to have the copies to be printed one after the other

    reinstalled with the latest version of the software and it's fine woking Thanl you so much Bill

  • HP LaserJet 1300: Print &gt; 1 copies of a document in Windows 10/MS Word 2016

    Hello

    Given that I've migrated to windows 10 I can't print multiple copies of the same document. I use the latest version of the pilot broadcast February 2, 2016. How to solve this problem?

    Thank you

    Zulkafil Abbas.

    I suspect that the following is the case:

    • Your document is a MultiPage document (i.e. not just a single page).
    • You select that copies be printed "collected" (e.g. pages 1,2,3,..., 1, 2, 3,..., 1, 2, 3,...) rather than "not assembled" (i.e. pages 1,1,1,..., 2, 2, 2,..., 3, 3, 3,...).
    • The driver assumes that the printer can produce multiple copies of a source only copy - this is known as ing MOPY(I think it stands for "copy of the original multiple").
    • But the printer does not function MOPY - usually this is only available if the printer has a hard drive or a large RAM disk - I do not think that LJ1300 supports one of these.

    You can confirm that the foregoing occurs by:

    • "Capture" a print job to a file (using the option "print to a file" in the print Word dialogue or sample driver
    • Then examing initially file resulting .prn (you should be able to open it in Notepad).
    • Most of the file can be unintelligible, but initially will look like the following (note that this example is for LJ 1320):

    If the command SET QTY is there, this confirms that the driver think the printer will make copies.

    If so, check the settings of the device to the printer:

    to check whether or not the system thinks that a hard disk is installed on the printer, and Mopier mode is enabled or not.

    If the disk hard printer is set to installed, change to not installed.

    If the Mopier Mode is set to Enabled, change it to disabled.

    Then repeat the tests to see if it makes a difference.

    He should do it, although the print jobs sent to the printer will be larger (they will contain several copies).

  • Cannot print multiple copies at the same time

    What should I do to make my printer to print multiple copies of a page

    Hard to say based on the small amount of information that you give. Visit the website of the manufacturer of the printer and ask their assistance or their forums.

  • Software Adobe reader prints multiple copies of documents in the wrong order: 11 22 33 instead of 123 123

    When you print multiple copies of the same document, printing output is always Page 1 one on the other, the whole, Page 2 stacked ETC. Example: Print 5 copies of a 3 page document, it will come out as 11111 22222 33333 instead of 12345 12345 12345, this has been the case with reading 8-11 and also DC

    Hi Vanessa,

    Your printer can sort multiple copy tasks. For example, if you print two copies of a three-page document and you choose not to collect them, the pages printed in the following order: 1, 1, 2, 2, 3, 3.

    Make sure that you check the mark before printing.

    Let me know if you are still having a problem.

    Kind regards

    Nicos

  • New M476NW Laserjet Pro do not print MS Word or Excel files

    I just bought a new printer color Laserjet Pro MFP M476nw. I am Sina MS Vista 32bits and MS Office 2007.

    The printer will print pictures, emails and I can make copies, etc, but I can not print Word files, envelopes from Word, Excel files, etc..

    Up to what my old HP Laserjet 4 p died the other day (internal short circuit) I was able to print everything. Spent 8 hours or so try everything I read from Microsoft, HP, etc., without success. Installed, uninstalled, reinstalled, ran diasgnostics, always without success.

    I can't communicate with anyone at HP for less than $99 to talk to a person. Very frustrating.

    As I said, the Word and Excel files printed fine until I bought the new M476nw printer. How can this be repaired?

    @DerekChristense

    Thanks for letting me know that print and Scan Doctor helped you solve your problem and you print back.

Maybe you are looking for

  • Apple 4th TV showing a larger image that will not fit my TV.

    It seems like I'm losing part of the image produced by the ATV. When I go into the settings, I don't see the maximum area showed on the screen. Apple suggests that I have to do the configuration on my TV, but my TV is an old LG TV, model 47LY3RF and

  • Satellite Pro C660 does not start, no screen

    Hi guys I was wonder if anyone could help please. I have a Toshiba laptop Satellite Pro C660 - 2 DR who seems to be defective (just out of warranty).Everything worked fine until we came to a morning market and found that the screen remains off (black

  • NVidia Geforce Go 7600 TV strange behaviors on a series of Satellite has

    Hello I'm trying to find a way to make TV work. Any help would be greatly appreciated. Toshiba Satellite, Vista Ultimate, T2500 2 GHz, 2 GB of RAM, nVidia Geforce Go 7600 256 MB + additional 767 MB. I used a short S video cable until recently without

  • Lost drivers for Satellite Pro L10 etc - where to get the software?

    I had to reinstall windows xp on my Satellite Pro and have managed to install drivers etc for evrything but the WiFi. Device Manager displays an error of the pilot against Ethernet controller and although the Wifi light is on it does not appear anywh

  • Lolipop for Lenovo a6000

    I can't get the update of the lollipop for my mobile, how do I get that