Helps with the formatting of a field of text PDF

Similar Questions

• Need help with the formatting and reinstalling windows

  Hi, I have a Compaq Presario C700 p/n GR598EA #ABU I got to work about 3 years ago.

  Recently, it does not load windows, even in safe mode and I can't get back either.

  I used a disc to boot from linux to access and backup of all my important files and now I want to reformat the hard drive, resintall windows and start over (or try something else which will fix it)

  The laptop has been pre-installed with Windows Vista and HP stuff had already installed on it.  I don't have a Windows disc or discs of driver with the laptop.

  How can I format and reinstall windows and drivers, if I don't have records?

  Help, please.

  Thank you.

  Hello:

  You can order a Vista recovery disk set for your laptop if they are still available. See the instructions below:

  http://support.HP.com/US-en/document/c00810334=

  If you live not in the US or the Canada, you can contact HP Support worldwide for the country you live and ask recovery disks command to your laptop

  The link to the assistance of HP WW is below:

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Paul

• Helps with the formatting on objects

  I have a script that I modified from a script of Alan Renouf (thanks for posting the script), but I'm having a problem with the output.

  The script gets a few details on a hard drive of virtual machines, and this is what is shown:

  VM: VM1

  Path              : {C:\, D:\}

  CapacityGB: {40: 40}

  FreespaceGB: {1: 18}

  Percent free: {2, 45}

  Low disk space on: C:\

  VM: VM2

  Path: {/, / boot, / usr, / home...}

  CapacityGB: {4, 1, 10, 2,...}

  FreespaceGB: {3, 1, 4, 0...}

  Percent free: {84, 95, 40, 17,...}

  Low disk space on: / home/brands

  The script is below, and it is the main problem.  I can show any data if I use - reach ',' on the parts that need it, but I have an if statement that will add another object to "Low disk space", then the drive letter.  I have this for disks that have less than 15 percent of available.  If I use - join, the output goes to a string and if statement I put in quotes below

  "

  If ($HDdetailsHT. ("' 15% free"-lt) {}

  $HDdetailsHT.Add ("low disk space on ', ' $(($HD |))") where {$_.} FreeSpaceGB / $_. ({CapacityGB * 100-[int] - lt 15}). Path)")

  }

  "

  The above if the statement will not work if I change one of the lines, for example:

  'CapacityGB' = ($HD. CapacityGB | foreach {$_ - as [int]})-join «,»

  
  

  If I do the above, all the data shows, but the if statement does not work anymore, because now, there's some string data.  I can't imagine a way to use my if statement and to show all the data entirely.  Given that some virtual machines may be small on space, I don't want the "low disk space on ' to show everything.  Any help is appreciated.
  

  $AllHDdetails = @)

  $AllVMs = get - VM 'VM1', 'VM2.

  {foreach ($vm to $AllVMs)

  $HD = $vm. Guest.Disks | Path of kind

  $HDdetailsHT [ordered] = @ {}

  "VM" = $vm. Name

  'Path' = $HD. Path

  'CapacityGB' = $HD. CapacityGB | foreach {$_ - as [int]}

  'FreespaceGB' = $HD. FreespaceGB | foreach {$_ - as [int]}

  "% Free" = $HD | foreach ({$_.}) FreeSpaceGB / $_. {CapacityGB) * 100 - as [int]}

  }

  If ($HDdetailsHT. ("' 15% free"-lt) {}

  $HDdetailsHT.Add ("low disk space on ', ' $(($HD |))") where {$_.} FreeSpaceGB / $_. ({CapacityGB * 100-[int] - lt 15}). Path)")

  }

  $HDdetails = new-Object PSObject - property $HDdetailsHT

  $AllHDdetails += $HDdetails

  }

  $AllHDdetails

  If you want only when there is not enough disk space, and if you can live with object with different properties in production, you could do something like this

  $HDdetailsHT [ordered] = @ {}

  "VM" = $vm. Name

  'Path' = $HD. Path

  'CapacityGB' = ($HD. CapacityGB | foreach {$_ - as [int]})-join «,»

  'FreespaceGB' = ($HD. FreespaceGB | foreach {$_ - as [int]})-join «,»

  "% Free" = ($HD | {($_.) foreach}) FreeSpaceGB / $_. ({CapacityGB) * 100 - as [int]})-join «,»

  }

  }

  $low = $HD | where {($_.)} FreeSpaceGB / $_. (CapacityGB * 100-en tant que [int]) - lt 15} | Select the path - ExpandProperty

  {if ($Low)}

  Add-Member - InputObject $HDdetailsHT - name "low disk space on ' - value $low - MemberType NoteProperty

  }

• by comparing certain objects... helps with the formatting and variables

  I want to delete computer accounts in an ORGANIZATIONAL unit that do not exist in a folder of vmware...

  Step 1. Compare.

  $ad = Get-QADComputer -SearchRoot 'domain.lan/Test-NoGPO'
  $vmware= Get-VM -Location VDI_RemoteAccess
   
  Write-Host "AD" $ad
  Write-Host "VMWARE" $vmware
   
  Compare-Object  $ad $vmware
  
  

  Gives me this result:

  AD DOMAIN\DSTASA1$ DOMAIN\SXCH100$ DOMAIN\SKFB111$ DOMAIN\FAKEPC$
  VMWARE vstaq16 vstaq18
  
  InputObject                                                               SideIndicator                                                           
  -----------                                                               -------------                                                           
  vstaq16                                                                   =>                                                                      
  vstaq18                                                                   =>                                                                      
  DOMAIN\DSTASA1$                                                          <=                                                                      
  DOMAIN\SXCH100$                                                          <=                                                                      
  DOMAIN\SKFB111$                                                          <=                                                                      
  DOMAIN\FAKEPC$                                                           <=    
  
  

  I need the output of 2 first orders are the same... preferably just the 'name' of the pc. On the subject line - compare I tried to use $ad. Name and $vmware. Name but that the errors and says that it is null when the script runs...

  How to disinfect these lists and end up with a list of computers that are not in both places? (to later be deleted with other commands, not relevant here)

  You were there at halfway when you tried with the Name property.

  But you must keep all the computernames in 1 table and all VMnames in another table.

  Then, you can compare the 2 tables.

  Something like that

  $ad = Get-QADComputer -SearchRoot 'domain.lan/Test-NoGPO' | %{$_.Name}$vmware= Get-VM -Location VDI_RemoteAccess | %{$_.Name}
  
  Compare-Object $ad $vmware
  

• Please help with the format of the report

  Hello
  
  When I queryiing my result is like
  
  Select * from the general;
  

  MONTH    REGISTERD   ACCEPTED   REJECTED 
  2012-04        120             80               40 
  2012-05          80             40               40 
  2012-05         60             40               20 
  2012-04         90             40               50 
  
  How i can display my result like below :
  
                   2012-04    2012-05
  registered       210          170
  accepted        120           80
  rejected           90           60

  Thank you
  Chauvet.
  
  Published by: Chaumont on October 3, 2012 09:02

  SQL> SELECT status,
    2         sum(month1_amt) month1_amt,
    3         sum(month2_amt) month2_amt
    4  FROM GENERAL
    5  UNPIVOT(AMT FOR status IN ( registered AS 'REGISTERED',accepted AS 'ACCEPTED',rejected AS 'REJECTED'))
    6  PIVOT(SUM(AMT) as amt FOR MONTH IN ('2012-04' AS MONTH1,'2012-05' AS MONTH2))
    7  group by status;
  
  STATUS     MONTH1_AMT MONTH2_AMT
  ---------- ---------- ----------
  REGISTERED        210        140
  REJECTED           90         60
  ACCEPTED          120         80
  

  Published by: JAC on October 5, 2012 18:20
  I forgot to update, see no response from Frank...

• Help with the Powershell script to collect logs from all domain controllers

  I am writing a script to retrieve the last 5 days of application, security and log files from all domain controllers. The script runs, but fire the logs from the local server only. The variable $Computer has all of my DC so it's the fine mark. I guess it's a problem with my line ForEach-Object, but is not error. See the below script.

  $log = 'application '.
  $date = get-date-format MM-DD-YYYY
  $now = get-date
  $subtractDays = new-object System.TimeSpan 5,0,0,0,0
  $then = $Now.Subtract ($subtractDays)
  $Computers = get-ADDomainController-filter *.
  ForEach-Object - InputObject $Computers - process {Get-EventLog - LogName $log - after $then - before $now - EntryType error | select EventID, MachineName, Message, Source, TimeGenerated |} ConvertTo-html | {Out-file $env:TEMP\Applicationlog.htm}
  Invoke-Expression $env:TEMP\Applicationlog.htm

  Thank you

  Rich

  Hello

  To help with the repost the question script to the script Center Forum

  http://social.technet.Microsoft.com/forums/scriptcenter/en-us/home

• Help with the query to select only one record from the result set in double

  Hello

  Please help with the query. Version of Oracle database we use is 10g R2.

  I have a vision that is duplicated IDS, but they are used across the different functions. See below examples of data. Please help me with a query to select only one record (based on ID regardless of the area) from the bottom of the result set of duplicate records. For what is the point of view is there unique records, given the combination of the fields ID, Org, DF, dry, Sub-Sec

  ID	Org	DF	Sec	Sub-Sec

  
  (163)CQCPDMCPDMHD(163)PCENGENGENG(163)CQASICASICIS8888TSTACTACTAC(163)TSHEHESW6789CQINFOINFOFOS6789PCSECSYSSECSYSINFO16789TSSECSYSSECSYSINFO29009PCBMSBMSBMS1

  My result set must eliminate the duplicate identifiers regardless of whoever we choose of the result set. (I mean without distinction Org, DF, s, Sub-s). My expected result set should be.

  ID	DSB

  
  DF
  SEC
  Sub-Sec
  (163)CQCPDMCPDMHD8888TSTACTACTAC6789CQINFOINFOFOS9009PCBMSBMSBMS1

  
  

  Thank you

  Orton
  

  Hello

  This sounds like a job for ROW_NUMBER:

  WITH got_r_num AS

  (

  SELECT id, DSB, df, s, sub_sec org

  ROW_NUMBER () OVER (PARTITION BY ID.

  ORDER BY org

  ) AS r_num

  OF view_x

  )

  SELECT id, DSB, df, sub_sec s,

  OF got_r_num

  WHERE r_num = 1

  ;

  He is a Top - N query example, where you choose the elements of N (N = 1 in this case) from the top of an ordered list.

  I hope that answers your question.
  If not, post a small example of data (CREATE TABLE and INSERT, only relevant columns instructions) to your sample data and the results desired from these data.  (I know that you said that you were a view selection.  Just for this thread, pretending it is a picture and post simple CREATE TABLE and INSERT statements to simulate your point of view).
  Point where the above query is to produce erroneous results, and explain, using specific examples, how you get the right results from data provided in these places.  (I didn't quite understand the explanation above.  I don't know why you want to

  ID ORG DF DRY SUB_SEC

  --      ---     --      ---     -------

  1234 CQ DPRK DPRK HD

  and is not

  1234 IS CQ ASIC, ASIC

  or

  TS 1234 IT IT SW

  or

  1234 CQ ASIC ASIC HD

  )
  If you change the query at all, post your modified version.
  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Problem with the format of the values in the command prompt (when you use multiple values)

  Hi all
  
  I have problem with the format of the values in the command prompt when you use multiple values.
  
  Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
  
  Thank you

  I think the YEAR Data Type could be defined DOUBLE RPD.

  Use the CAST function in the formula (fx) and the output from test.

  CAST (INT YEAR)

  Hope, it will help you.

• What is the correct way to ask for help with the forum, rather than product, questions?

  I can't find the right way to ask a question about the forums themselves.

  PAGulley said

  I can't find the right part of the forum to ask questions about the forum itself and its features. I wonder what the right place and the way is to get help with the forum system itself. I can find the place to ask questions about specific Mozilla products very well.

  Look up where it says contributor tools and select Contributor Forums. Make sure that you scroll to the top or you'll get a bar with different links instead,

  The forum is https://support.mozilla.org/forums where you question would be better in the SUMO community discussions.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• help with the beats on my envy 17-3270nr, n key

  help with the beats on my envy 17-3270nr key. recent Smart hard disk crash, replaced with exact same hitachi drive, same care extended warranty repairs covered of the Frys. Windows 7 Edition home premium w / service PAC 1 installed, drivers installed, except that now there is no volume of beats on screen graphic dial button, click the button on top button on the page does not call the beat of the application settings. Futhermore; the motion sensors of laser to activate the keyboard backlit keyboard do not work.  Are there drivers hp software to enable the missing features?

  Hello

  Download and install the following.

  HP OSD utility.

  Proximity sensor driver.

  Once completed, restart the laptop.

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.