Ho I join the live session event?

Ho I join the live event, and is it possible just to see the upgrade process, because I haven't the time to configure a virtual machine?

You have a link in an email from on24event.com. If you do not, check your junk mail.

Tags: Oracle

Similar Questions

How can I join the live event?

Can @Ho I register for the live event?

At the time you posted this question, the STM sessions had not started yet. The event started at 9:00 PT. Please let me know if you are still experiencing difficulties to connect.

Note: all sessions will be available for consultation on request after the event is finished at 1:00 pm PT.

See you soon,.

LKR

Join the Session after 3rd party authentication OAuth

I use 5 APEX and integrate my application with another 3rd party solution. This 3rd party solution uses OAuth2 for authentication, which has a static redirect_url (a successful authentication post) which cannot be defined in the URL to call. Rather, it is defined as part of their application.
I know it's confusing, so here is the whole process that happens:
- Web server is Node.js (Express with Passport for OAuth authentication) makes queries APEX proxies to ADR 3 / Tomcat.
- The user connects to the application of the APEX and gets a new session ID.
  - ex: f? p = 100:1:20953642103077
- Once logged in, there are a few JS on Page 1 (P1) that detects whether the user has been authenticated with this 3rd party service (call the 3PS for that matter). It does this by looking at a custom cookie that is set by the web server for Node.js (let's call this 3ps_token).
  - If 3ps_token is null, then it will trigger the process of 3PS OAuth and use is redirected to their site to connect and to grant the appropriate privileges.
  - Once 3PS has granted the privileges, the user will be redirected to a predefined URL which is stored as an attribute in the 3PS area. I can't pass in the URL as a parameter to URL redirection and don't have, so no real way to back the session APEX I was coming.
  - The redirect URL is currently going back to the Node.js, which sets the 3ps_token in a cookie, and then tries to redirect to the APEX and 'join' the existing session. This is where I'm having issues as the URL that I provided is/ords/f? p = 100 (as I don't know the original session).
How can I join my existing session of APEX (in the example above, 20953642103077)? If the following solution here: login page of APEX 4.1 kills the existing session cookie but this would require a custom authentication which I was hoping to avoid. Christian Neumueller-Oracle made a comment at the bottom of its solution join session is not secure. Is their a best practice because this so?

Hi Martin,

I have good news for you, we implemented session to return to the APEX 5. It will allow you to have an APEX URLs without a session id. You must first enable this feature in the Administration of the proceedings (see https://docs.oracle.com/cd/E59726_01/doc.50/e39151/adm_wrkspc002.htm#BABJCGAG) and then at the page or application level. Please consider the implications of security in this article, because to return potentially open your application to XSS attacks from other applications on the same server.

Kind regards

Christian

I don't see the event live from the URL indicated. How to join the event online please?

I don't see the event live from the URL indicated. How to join the event online please?

At the time you posted this question, the STM sessions had not started yet. The event started at 9:00 PT. Please let me know if you are still experiencing difficulties to connect.

Note: all sessions will be available for consultation on request after the event is finished at 1:00 pm PT.

See you soon,.

LKR

How do I apply to join the xbox live team?

How do I apply to join the xbox live team? and maybe I could speak one by email to find out more information? I was talking to an admin and he told me to apply here but idk how... It would be great if I got an answer: 3

Hello

XBox Live Enforcement Team?

Answers has no influence on the XBox or XBox Live If you need to contact them.

XBox - Support
http://support.Xbox.com/en-us/pages/default.aspx

XBox - Contact us (support)
http://support.Xbox.com/en-us/contact-us

XBox - Forums Support - and my XBox Live account (top-right)
http://forums.Xbox.com/

Xbox technical support phone number
- Toll-free: (800) 4MY-XBOX or (800) 469-9269
I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Windows Live Mail crashes on the update of the calendar of events

Windows Live Mail broken

When I hit update just as it hangs on the update of the calendar of events.

Don't send mail in the Outbox.

I'm on a live time alwaya DSL on connection.
Incoming mail is not in.
I have to click stop to do and download.

How can I activate the update schedule. I do not use this calendar.
There is no items checked on the schedule up-to-date anywayy.

Windows Live Mail is BROKEN! like many other products Ms.

Hello

Post your request in the forums 'Windows Live events' and Toolbar for better assistance. Visit the following link to send your request: http://social.answers.microsoft.com/Forums/en-US/wlevents/threads

All the best and hope the issue is resolved as soon as possible.

Thank you, and in what concerns:
Syed V - Microsoft Support

Conflict between the module session and seminar event

Hello
We use a 100 Adobe Connect license webinar and module Adobe Event. We have the following problem.
-Seminar room AI availlable and well structured
-Using the Event Module to schedule an event (works fine)
-Return to the seminar room to open a session of seminar (for better viewing, for the same regular time)
-Seminar session scheduling failed (conflict with a scheduled event of Module Event)
Question:
An event, planned with the Adobe events Module, having the same rights like a seminar (planned as an event inside the seminar room regular seminar).
I'm not sure that the Adobe events Module takes the same options as the seminar session planner standard.
If all goes well, there is an expert, who can help me solve this issue.
Best greetings from Hamburg,
Martin

Planning an event in a room of seminar with the events module creates the session of the seminar. I remember that is not present in the list of future sessions.

The feature you explain is so as expected with Connect. This way you don't have to plan the event twice, or get caught in a bad situation, because you created the event but didn't provide for the session.

CPU used by the session events

I have a table of 88 MB not including no clue to this topic.

select count(*) from ( select * from tbl where flag1=:1 and flag2=:2 and flag3=:3)

The sql above is at the top of the page processor consuming session while I interrogate 'cpu used by session event.

How does top different query of: -.

select count(*) from tbl where flag1=:1 and flag2=:2 and flag3=:3)

version is 10.2.0.2

When tried to see the plan to explain to the two sql
It's showing the same plan.

@? / RDM/admin/utlxpls

Watch full table scan
and with the cpu cost message is not configured/displayed

Please help me understand what
What query is better and why?
explain why the plan does not show the cost of CPU?

SQL> explain plan for
  2  select count(*) from (select * from t1)
  3  /

Explained.

SQL> select * from table(dbms_xplan.display);

PLAN_TABLE_OUTPUT
-------------------------------------------------------------------------
------------------------------------
Plan hash value: 3724264953

-------------------------------------------------------------------
| Id  | Operation          | Name | Rows  | Cost (%CPU)| Time     |
-------------------------------------------------------------------
|   0 | SELECT STATEMENT   |      |     1 |     3   (0)| 00:00:01 |
|   1 |  SORT AGGREGATE    |      |     1 |            |          |
|   2 |   TABLE ACCESS FULL| T1   |   301 |     3   (0)| 00:00:01 |
-------------------------------------------------------------------

9 rows selected.

SQL> explain plan for
  2  select count(*) from t1;

Explained.

SQL> select * from table(dbms_xplan.display);

PLAN_TABLE_OUTPUT
-------------------------------------------------------------------------
------------------------------------
Plan hash value: 3724264953

-------------------------------------------------------------------
| Id  | Operation          | Name | Rows  | Cost (%CPU)| Time     |
-------------------------------------------------------------------
|   0 | SELECT STATEMENT   |      |     1 |     3   (0)| 00:00:01 |
|   1 |  SORT AGGREGATE    |      |     1 |            |          |
|   2 |   TABLE ACCESS FULL| T1   |   301 |     3   (0)| 00:00:01 |
-------------------------------------------------------------------

9 rows selected.

SQL> explain plan for
  2  select count(*) from (select * from t1)
  3  /

Explained.

SQL> @?/rdbms/admin/utlxpls

PLAN_TABLE_OUTPUT
-------------------------------------------------------------------------
------------------------------------
Plan hash value: 3724264953

-------------------------------------------------------------------
| Id  | Operation          | Name | Rows  | Cost (%CPU)| Time     |
-------------------------------------------------------------------
|   0 | SELECT STATEMENT   |      |     1 |     3   (0)| 00:00:01 |
|   1 |  SORT AGGREGATE    |      |     1 |            |          |
|   2 |   TABLE ACCESS FULL| T1   |   301 |     3   (0)| 00:00:01 |
-------------------------------------------------------------------

9 rows selected.

SQL>

I see the same execution Plan.

Published by: Hemant K grapple on 23 July 2009 23:34

Im signed up for xbox live on my computer. Im trying to get it now on my Xbox 360. Windows live account? If I click on "Join Xbox Live" button on my Xbox and I type in my information

original title: Please help!

Im signed up for xbox live on my computer. Im trying to get it now on my Xbox 360. What I have to do a new Windows live account? If I click on "Join Xbox Live" button on my Xbox and I type in my information. It says IM associated with a different gamertag. Help, please!

Hello

Answers has no influence on the XBox or XBox Live If you need to contact them.

XBox - Support
http://support.Xbox.com/en-us/pages/default.aspx

XBox - Contact us (support)
http://support.Xbox.com/en-us/contact-us

XBox - Support Forums - and my XBox (top-right)
http://forums.Xbox.com/

Xbox technical support phone number
- Toll-free: (800) 4MY-XBOX or (800) 469-9269
I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Live kernel event

A problem with your video hardware caused Windows to stop working correctly.

Problem name live kernel event
6.06002.2.2076.2 OS version
Locale 1033 ID

Files that help describe the problem (some files may no longer be available).

WD-20080526-.dmp
SysData. XML
Version. txt

See a temporary copy of these files
WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

Additional information about the problem

BCCODE 117
BCP1 83E5D468
88809F80 BCP2
BCP3 00000000
BCP4 00000000

6_0_6000 OS version
Service Pack 0_0
Product 768_1
16689a51-0ccf-46b6-ac4a-da40efa7abc4 information server

Computer crashes and blue screen. Problem with windows defender. Cannot download, they failed.

Hello

Which summarizes the updated video driver, run SFC and CheckDisk, then how to find causes
If those who did not help.

You can try a step at a time which makes it easier. Getting a friend with a little more experience
to help would be a good idea.
Rob - bicycle - Mark Twain said it is good.

STOP: c000021a {fatal system error} the initial session process or system ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c). The system has been shut down

I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.

I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.

What about Otto

Windows vista Home basic

Hello

Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.

Dell support
http://support.Dell.com/

Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

Dell forums
http://en.community.Dell.com/forums/

=========

STOP: 0XC000021A

Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.

Cause

This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.

Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.

Solve the problem

Run the kernel debugger is not useful in this situation because the error occurred in a user mode process.

Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.

If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.

Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.

Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.

STOP: 0XC000021A<-- read="" this="">
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A-

-----------------------------------------------------------------------

Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html

-------------------------------------------------------------------------

It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
discs of the machine system good cheap that you already own windows (you will need to reinstall
If necessary). You can also repair disks on another computer.

Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

As examples:

BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002

or in this format:

Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

It is an excellent tool for displaying the blue screen error information

BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.html

BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.

You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

You can try a system restore to a point before the problem started when one exists.

How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html

-------------------------------------------------------------------------

Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

Enter this at the command prompt - sfc/scannow

How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228

The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).

Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html

-------------------------------------------------------------------------

Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.

Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

Installation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

-------------------------------------------------------------------------

How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233

Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htm

Understanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692

Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033

-------------------------------------------------------------------------

In some cases, it may be necessary.

Startup Options recovery or Windows 7 disk repair

How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.html

How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.html

How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Start stuck on "Please wait for the Local Session Manager."

I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

Had no problems to start in safe mode. Looked up various ways of addressing the problem.

Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

Ran check on memory. No problem either.

Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

I looked in the event viewer to see what came that time and a couple mistakes were:

Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

Event ID 7026: the next (s) start or start failed to load system
spldr
Wanarpv6

It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

Hello

1. by chance your computer is connected to a domain environment?

2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

If you did not disable these services make sure you disable and then check if it works.
See the article below for more information.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

I hope this helps.

Thank you, and in what concerns:
Shekhar S - Microsoft technical support.

Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

How to fix the error in the windows system event log

How to diagnose in the event log error... pls help.

Here are some notes on the event viewer reports that can help you. When you have a lot of mistakes, you need to focus on system errors and warnings, even if it's the applications that are giving you grief. Problems with the first sorting system can do the easier application problems. Note the time that the computer is started last and deal first with those at the beginning of the boot. Correct previous errors can be solved later.

1. normally, when an error occurs on your computer looking in Event Viewer should be your starting point to find a solution. More related system errors are recorded and get an exact copy of the relevant report is important. Unfortunately, is not easy to understand reports and most of the users computer need help with their interpretation. I have to say later interpretation.

2 Event Viewer includes three main newspapers of Windows. Here's the Application, security, and system. For purposes of troubleshooting system is by far the most important.

3. to access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, right click and select filter current log. Check the front of the error and click OK and see you only reports errors. Click the Date and time column header to sort. You may need to click a second time to see the last report above.

4. a tip for posting copies of error reports! Run Event Viewer and double-click the error you want to copy. Click the button copy on the general tab allows you to place a copy in the Clipboard and close Event Viewer. Now start your message and paste it into the body of the message. Make sure that it is the first dough right out of the event viewer.

5. He cautioned against three types of reports, information, and reports errors. In most situations, it is the error reports that offer the best information but sometimes WARNING reports provide useful clues.

6. all reports have stamps date and hour and when troubleshooting, it is important to focus on the latest reports. Reports of studies from the point when the computer is started, and then check if a similar report appeared in the previous session. If errors do not repeat investigation as to why they happen is wasted effort.

7. in the individual reports the most important information is the event ID and Source such as these help when looking for help on the internet. The description is just as important and copy the exact text to use as search criteria greatly helps achieve better results when using Google. Not paraphrase descriptions when other people asking for help.

Blue screen event (without real blue screen) and 3 simultaneous Live kernel event

I am running Windows 7 Professional Service Pack 1 with Internet Explorer 10, with all current updates.

Today, I searched through the observer of events under Windows Logs/Applications and has seen several entries to Windows Error Reporting. I noticed that a blue screen event was registered today, although I had not seen any real screen blue, or had no gel or any difficulty whatsoever. A minidump was created. At the exact time that the blue screen was recorded, three core events Live were also recorded and creates three .dmp files.

I thought it was unusual because it is not the first time that this has happened. I had six blue screens in six months, without actually seeing a blue screen or the system freeze or lock up on me.

Is it Blue Screen/Live kernel events indicative of an imminent failure? It is a desktop Dell OptiPlex 390 computer, purchased in January of 2012.

Thanks for any idea, you may be able to provide.

DK

Thanks this works. There are two problems that both resolved easily. Kaspersky first and second CHDRT32.sys High Definition Audio Driver Conexant Systems function related

I remove Kaspersky and using MSE instead and update the driver Conexant for the most recent driver available, even if it is the same date that drivers become corrupt

Kaspersky is a common cause of BSOD.

I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

http://support.Kaspersky.com/downloads/utils/kavremover10.zip
http://www.Microsoft.com/security_essentials/

message that is displayed in the chat session

Hello

During a live chat session, that is by the live chat only that I use with the customer on a utility service, etc... I get this message displayed when the conversation...

"disconnection and connection resumed" . This occurs several times during the entire conversation. One minute, I'm connected or connected OFF. She's just continually in its entirety.

I am running windows 7 with internet cable, phone, and a router. Anyway, can you please help?

Hello

Welcome to the Microsoft Community and thanks for posting the question.

According to the description, you get a connection error.

Which live chat session where you engaged in?

The error seems to be bound to a connection that can be resolved by this team of application support. Please contact them for assistance.

Hope this information helps.

Ho I join the live session event?

Similar Questions

Maybe you are looking for