How can I delay the audio once a user clicks on?

Similar Questions

• How can I delay the audio track by half a second

  I am changing a clip video source footage of the layer that has the music on the audio 1 track, linked to the video 1 track. The music starts a fraction too soon and so I want to delay the start very slightly. Is there a way to do this. Thank you

  Mike

  Hi Mike,.

  Yes:

  (1) make sure that you are editing, not in mode mode sceneline

  (2) right click on the item in the timeline, and then select 'Delete Audio and video connections '.

  (3) you can now drag video and audio independently on the timeline.  To move half a second, you will need to zoom in a lot to move that small of an amount.

  (4), of course, have "silent" for 1/2 second at the beginning of the clip however!

  Hope that helps!

  Bob

• How can I change the audio track on netflix

  I have the new Apple tv 4. How can I change the audio track on netflix?

  Setup of the Apple tv has been replaced by the language I want but Netflix ignores this.

  Thanks in advance

  If the film has a choice of audio tracks, you should be able to slide down while the film is presented, then select audio in menus that appear.

• How can I return the audio for my lap top.

  Original title: audio sound

  I inadvertently deleted something that gives me sound on my lap top. I think it is silverlight. How can I return the audio for my lap top. THX

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  3. when exactly do you face the question?

  I suggest to return the item and try to run the fix it:

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Please provide more information to help you best.

• How can I reinstall the audio drivers for my motherboard d845egb2 intel

  I received a 2nd hand computer and had to wipe all of its information. and lost the ethernet drivers and audio. So how can I reinstall the audio drivers for my motherboard d845egb2 intel

  Hi samshepherd,

  To check if an updated audio driver is available for your sound card, you can use Microsoft Update to help you determine your current sound driver and if an update is available.

  You can also contact the sound driver hardware or the computer manufacturer for an updated audio driver.

  See the link below for more details:

  How to update a sound card driver in Windows Vista and Windows XP

  Additional reference on:

  How to troubleshoot sound problems in Windows XP

• Media Player when I go to burn my songs it says data instead of CD disc. How can I change the audio disc?

  When I go to burn my songs it says data instead of CD disc. How can I change the audio disc?

  original title: Media Player

  Just a thought...

  Well, click on the burn tab should open a menu where you can select any Audio CD or data CD.

• How can I activate the audio service

  How can I activate the audio service

  Info here

• How can I adjust the audio level to 85 dB in first export?

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  AnjuBacker wrote:

  How can I adjust the audio level to 85 dB in first export?

  How to set the level in the you use the audio player for 85 dB?

  Loudness Radar is useful for this?

  85 dB is a level of calibration of the monitor. Use a meter of SPL (C-weighted/slow) with pink noise to perform this task. It is not something that is defined during mixing or exit. Loudness Radar is a sound level meter software. It includes templates and Visual representations to program Loudness, short temporary term Loudness, Loudness and Loudness Range (LRA). There is also an indicator of True Peak exceeded. Add this at the end of you point out the string for a precise measurement of your mix. Note to determine an exact indication of the program Loudness, the audio segment must be measured in its entirety.

  -paul.

  @produceNewMedia

• When I drag my clip in my calendar, there is no audio that comes with it, even if it is supposed to be. How can I get the audio?

  When I drag my clip in my calendar, there is no audio that comes with it, even if it is supposed to be. How can I get the audio?

  Make sure your Source patch and the targeting of the track are set correctly:

  

  MtD

• I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  I can't display image icons when working with my photo folder. How can I see the photos without having to click on them in preview mode?

  -It used to work and for some reason, now it does not work

  Greetings, d_chiuch1104,

  There is one thing that I know that you need to check that COULD be your problem.  Open Control Panel (in Classic view) and click Folder Options (or, in Control Panel, click on appearance and personalization and then Folder Options).

  Open the view tab and make sure that "Always show icons, never thumbnails" is NOT checked.

  It would be good to hear from you as to whether that was the problem!

  GL - Bob

• How can I stop the audio playback in plugins shipped from start without be clicked?

  I try to used audio plugins in my podcasts that are posted each week. But when I add a new plugin each week he begins to play as soon as you click on the site. I have six programs playing at once. How can I configure the settings so that must first click on the play button for them to start playing?

  Change audioplay to autoplay = "false"

  Nancy O.
  

• How can I remove the audio when there is no cutting to click on?

  I did several films, however, the latter has a problem. He didn't there is audio that plays at the end of my movie, but no visible cutting (video or audio) for me, right click and delete.  It's as if the element is missing, but audio plays for five or six seconds, not related to any video.  I can't highlight the audio delete (there is no image showing same) and I cannot reduce the volume level here either.  I think that there is a bug in the last update of the components of Prime Minister.  Any ideas?  Or I have to start all over in the creation of my film?

  todde

  Thanks for the reply with screenshot.

  On your screen, you are in the quick workspace. Please go to the Expert workspace where you can get a better view of what's going on

  and therefore have more control.

  It expanded to display the titles and their content will be a definite advantage.

  We will follow to your results.

  RTA

• How can I block the SMTP for all users but mail server

  I can't understand (1) how can I refuse port 25 for all users on the network and allow for Exchange server SMTP, also I have MS Exchange, which manages the web and smtp and in my setup below you can see that there static mapping to publick ip with http/smtp only, then (2) how can we separate the traffic entering a publc IP will outside servers inside ex : (MSexchange public ip address is x.x.x.207-> http = 172.16.2.13, 172.16.2.14 = smtp)

  Thank you

  ___________________________________________________

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  names of

  name 172.16.4.10 pdc

  name 172.168.4.11 llc

  name 172.16.4.11 ftp

  object-group service E-mail tcp

  port-object eq www

  EQ smtp port object

  object-group service tcp - udp terminal

  3389 3389 port-object range

  object-group service mw tcp - udp

  Beach of port-object 367 367

  radmin tcp service object-group

  RemoteAdmin description

  4899 4899 object-port Beach

  object-group service mw1 tcp

  Beach of port-object 367 367

  access-list 101 tcp refuse any any eq smtp

  access-list 101 permit tcp any host object-group x.x.x.251 terminal

  access-list 101 permit tcp any host x.x.x.214 object-group radmin

  access-list 101 permit tcp any email host x.x.x.207 object-group

  access-list 101 permit tcp any host x.x.x.212 object-group mw1

  access-list 101 permit tcp any host x.x.x.211 eq ftp

  sheep ip access-list allow any 192.168.101.0 255.255.255.240

  IP address outside x.x.x.194 255.255.255.192

  IP address inside 172.16.2.1 255.255.0.0

  IP verify reverse path to the outside interface

  IP verify reverse path inside interface

  alarm action IP verification of information

  IP audit attack alarm drop action

  IP local pool mypool 192.168.101.1 - 192.168.101.20

  don't allow no history of pdm

  ARP timeout 14400

  Global interface 10 (external)

  NAT (inside) 0 access-list sheep

  NAT (inside) 10 0.0.0.0 0.0.0.0 0 0

  static (inside, outside) x.x.x.212 172.16.4.12 netmask 255.255.255.255 0 0

  static (inside, outside) x.x.x.251 172.16.4.51 netmask 255.255.255.255 0 0

  public static x.x.x.214 (Interior, exterior) pdc netmask 255.255.255.255 0 0

  public static x.x.x.211 (Interior, exterior) ftp netmask 255.255.255.255 0 0

  "REM # 172.16.2.13's Exchange with Outlook Web servers #

  static (inside, outside) x.x.x.207 172.16.2.13 netmask 255.255.255.255 0 0

  Access-group 101 in external interface

  Route outside 0.0.0.0 0.0.0.0 x.x.x.193 1

  enable floodguard

  Sysopt connection permit-pptp

  VPDN PPTP-VPDN-group accept dialin pptp

  VPDN group PPTP-VPDN-GROUP ppp authentication pap

  VPDN group PPTP-VPDN-GROUP ppp authentication chap

  VPDN group PPTP-VPDN-GROUP ppp mschap authentication

  VPDN group PPTP-VPDN-GROUP ppp encryption mppe 40

  VPDN group VPDN GROUP-PPTP client configuration address local mypool

  VPDN group VPDN GROUP-PPTP client configuration dns 172.16.2.6 172.16.4.6

  client PPTP-VPDN-GROUP VPDN group configuration wins nymc_pdc

  VPDN group VPDN GROUP-PPTP pptp echo 60

  VPDN group VPDN GROUP-PPTP client for local authentication

  VPDN username * password *.

  VPDN allow outside

  This is your problem:

  Access-group 101 in external interface

  You link this access list to your external interface. This means that the rules are applied to incoming traffic IN your network. The implicit IP any any rule is because you have not bound to an access list on your inside interface.

  To prevent users from going out, you will need this:

  access list permit tcp host exchange_IP OUTPUT no matter what eq smtp

  access list tcp OUTPUT deny any any eq smtp

  Access-group interface inside OUT

  See how this access list is linked to the inside interface... it will affect traffic leaving your network. Note: Once you apply this inside allow any interface it will remove the implicit.

• How can I fix the audio distortion when you make a video call using Windows Live Messenger

  When you make a video call using Windows Live Messenger I get audio distortion. How can I solve this problem

  Hello WayneMarkham,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• How can I reinstall the audio device.

  I used the space on the material. and no installed audio device.

  Hi dc2nice,

  · What is the number and the model of the computer?

  Check whether the sound card is installed on your computer. Follow the steps below:

  a. open the Device Manager by clicking the Start button

  b. click on run

  c. type devmgmt.msc

  d. expand the section audio controllers, video and game to see the sound card you have installed.

  If this article does not appear or is not sound card, your computer does not have a sound card, or the driver for the sound card has not been properly installed.

  If you do not have a sound card, obtain and install one. Contact the manufacturer to check the hardware configuration of the computer and make sure that the sound card is installed.

  If the sound card is already installed then update the sound card. You can check the link below: how to troubleshoot sound problems in Windows XP: http://support.microsoft.com/kb/307918

  You can also check: no sound in Windows:http://windows.microsoft.com/en-us/windows/help/no-sound-in-windows?T1=tab02

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.