How the edge to inspect emule on the device?

Similar Questions

• How the device select radius-server

  Hi guys,.

  We have the existing Ganymede configuration to form our devices and server ACS 2 did. the acs server are managed with other suppliers that the acs server is on their site. Now intended to manage the acs server. We installed a new server CSA of our location, we have thousand of the devices, if we move to the new server we just add the acs unit 2 Server? the new acs server will be are able to connect to the device? How a device chooses which acs primary or secondary server?  Please notify.

  Old configuration

  AAA new-model

  AAA authentication login vtymethod group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA authorization commands 0 default group Ganymede + local authenticated by FIS

  15 AAA authorization commands default group Ganymede + local authenticated by FIS

  AAA accounting send stop-record an authentication failure

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Ganymede IP source-interface Loopback0

  RADIUS-server host 10.x.x.x

  RADIUS-server host 10.x.x.x

  New config

  AAA new-model

  AAA authentication login vtymethod group Ganymede + local

  AAA authorization config-commands

  AAA authorization exec default group Ganymede + local authenticated by FIS

  AAA authorization commands 0 default group Ganymede + local authenticated by FIS

  15 AAA authorization commands default group Ganymede + local authenticated by FIS

  AAA accounting send stop-record an authentication failure

  AAA accounting exec default start-stop Ganymede group.

  orders accounting AAA 0 arrhythmic default group Ganymede +.

  orders accounting AAA 15 by default start-stop Ganymede group.

  Default connection accounting AAA power Ganymede group.

  AAA accounting system default start-stop Ganymede group.

  Ganymede IP source-interface Loopback0

  RADIUS-server host 10.x.x.x

  RADIUS-server host 10.x.x.x

  RADIUS-server host 100.x.x.x<-->

  RADIUS-server host 100.x.x.x<-->

  Hi m.,.

  N ° not round robin.

  It checks the first IP address. It checks only the following IP address if one has failed.

  I hope it's clearer now

  Rating of useful answers is more useful to say "thank you".

• How the device a method in the class VOROWIMPL to insert a line?

  Mr President

  My worm jdev is 12 c (12.2.1)

  My use case, is that I want a method in my class vorowimpl to insert a row in my table.

  How to do this?

  Concerning

  OHK, have you checked the above shared link?

  You can use the same code in your class RowImpl and create a line like this

  ViewObject vo = this.getViewObject ();  To get ViewObject class RowImpl

  Line r = vo.createRow ();  To create the new line

  vo.insertRow (r); To insert newly created in the whole of lines

  
  

  Ashish

• How the form to register on the edge of adobe?

  HY, how the coding form to register on the edge of adobe? Please help me

  

  Hello

  you don't have to answer I found the solution!
  I had to just put

  on the stage composition lends the following command:

  {if(Top!=Self)}

  Top.Location.Replace (document. Rental);

  }

  Thank you very much for your support.

  Good day

  Davide

• Smartphones blackBerry how to reinstall the device att v4.5 software.

  I want to use the Korean fonts, but att did not have so I just download and installed

  but my phone had connection problems (usually, cell phone is not 'edge' and I couldn't use IM +..)

  and I think that the reason is that I use the program bad company (just I think..)

  So I want to reinstall os v4.5 of att.

  I have download and install on the computer and the vendor.xml file deleted, but still the Device Manager software reads not any update

  (the first time I connect my device it shows there are some updates, but after that I'll update the page, he says there is no update).

  How can I change my OS to os from att? (I don't want to go down and reinstall 4.5OS if possible... it takes so - time!)

  is there another solution to solve my problems?

  If you have another OS installed, you must first do it in Add/Remove programs and uninstall the "BlackBerry Handheld Software". Then you can download the software AT & T 4.5. If you are BlackBerry comes from AT & T you do not have to delete the vendor.xml file after installation. Later, you can simply go through the Application Loader to load the AT & T OS on your device.

• Windows 7 - how the hdmi cable from the pc to the tv

  Original title: need help

  How does the cable from the PC to the tv hdmi

  Hi paulgibsonTF,

  The problem is that Windows developers are (I think) try to be too smart - if your computer doesn't have any HDMI cable plugged into it, and you do not have a HDMI device at the other end of the cable (like a TV or surround sound amplifier / speaker system), then Windows will simply ignore the Windows software for the HDMI driver is loaded.

  And even when you have a device HDMI plugged in and turned on, sometimes, Windows does not see that it is there. So don't mind allowing you to set the parameters of the device.

  Now... to begin the search. Go down on the status bar (this bar on the lower edge of the screen) system and find the sound icon - looks like a small speaker. Click on it and click playback devices. On my computer, I get a window ACOUSTICS, and it only shows a device (speakers / headphones).

  I don't have a connected HDMI device this time. But I do not have the device drivers loaded.

  Recently, I tried to plug in this same laptop to my TV HDMI, and... of course, Windows won't see HDMI devices are there and it is plugged. Once again.
  WHY? I do not know. But I had to pass by there is two years (even mobile) was about four cycles to uninstall the device HDMI driver, reinstall it, turn off things, disconnect, turn them, plug them,... and all of a sudden it started working.

  If Microsoft is still looking at this forum and answers other than "Windows 8", I'd love to hear them also!

  http://geekitdown.com/how-to-connect-Windows-7-laptops-to-TVs-using-HDMI/

  http://Windows.Microsoft.com/en-in/Windows7/connect-your-computer-to-a-TV

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/HDMI-sound-in-Device-Manager-but-does-not-show-up/3ef1505c-7116-441c-80f3-bf096ed1c2fb

  http://www.TomsHardware.com/Forum/324637-33-enable-HDMI-output-Windows

• How the panels can be locked to the workspace so that they move and resize with it instead of circulating only?

  With all the other programs I've used LR, including when the main window is re-size all associates "panels" stick with it.

  PS 6 and earlier versions... for me, re-sizing the window let the signs floating around on their own. Is there a way to lock things to keep them with and resize the main window?

  If you go to window > workspace and click on the Essentials (default), which should give you an example how the panels are anchored to the photoshop window and follow the photoshop window resizing.

  Using Photoshop | Basics of the workspace

  examples

  

  

  You can dock the panels to the photoshop window by dragging to the edge of the window until you see a blue line and then release the mouse button.

  

  

• How the end of STROKE angle

  I want to add some features of 2pt white (no fill) of an Illustrator document to separate some traces geometric, filled with color, into sections.

  This works very well for rectange on the horizontal. But I also a few polygons that are on the diaganol.

  How to shape the ends of my race to match the diaganols?  See attachment for a close-up screenshot. White is my 2pt stroke. I want to stop at the edge of the Green Lane, not encroach on the orange.

  

  Mary,

  If green road extends to the bottom of the white race, you can also copy the green path before the white line, select both and object > clipping mask > make, to hide the upper part of the device.

  If you choose to extend the white line, you can select that and the green path and Pathfinder > fracture and separate and remove the white part peripheral (if the White path goes all along the Greenway, the Greenway will be split into two independent paths, and the part under the White path will be deleted) or you can edit as suggested by Monika which is also a solution simple and clean; for the latter, Smart Guides are your friends: you can select the White path and cut with the scissors tool where the guides say intersect on the Green way.

• Difference between the emulator and display device

  Hi, people.

  I have a weird problem that makes me nuts for a week now... Maybe someone has experienced this before, if I´ll explain my problem shortly.

  I m working on an application for mobile devices, using the Flex SDK to 4.6. Here is my xml settings:

  <>aspectRatiolandscape< /aspectRatio>

  <autoOrients>true< /autoOrients>

  <full screen>true< /> fullscreen

  <>renderModegpu< /> renderMode

  The app works perfectly on the device, but when running in the emulator of the ADL, every single object seems to have a substantive gap, because they were all higher than they should. The strange fact is that when I click in the area where objects should be, they respond perfectly, because they really are where they should be. It s just what they show in the wrong place.

  I have attached a screenshot to illustrate the problem.
  

  

  As you can see, the weird zone is covered with a kind of extended version of the image... I Don t know yet how to explain it.

  NOTE: After reading something in this forum, I just did a quick test, turning CPU GPU mode, and all appears well on the emulator... But I really need to be in GPU. Someone knows something about this problem with the GPU settings?

  Thanks in advance.

  This is a known problem, and the simple solution for now is to disable full screen while you test in the ADLS.

• How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.

  How the batch of photos of change in Version 2.0 of Photos... impossible to find the function.  If it has been deleted to "improve" the Photo experience?

  Lot, what exactly will change?

  Titles, Descriptions and capture date - Yes.

  Select the images you want to change the title or the description and to set-up the info (command-i) pane.  Enter the title or the description in the appropriate field and he will be assigned to all selected pictures.

  

  If you want to batch, change the title with sequential use attached many Applescripts provided by users in the Photos for Mac user tips section.

  Batch change/correction of dates is provided by the Image ➙ setting Date and time menu option:

  

  

• How the work of automatic channel selection?

  Hi all

  I was wondering how the AUTO function works on an Airport Extreme/TimeCapsule channel selector 2.4/5 GHZ?  He selects a channel only started upward or is constantly searching for the best channel and according to the needs of switching?

  

  Thank you.

  Hi solomani,.

  At startup.

• -What it means and how to fix it? iTunes could not connect to the iPhone from the iPhone Simon Young, because an invalid response was received from the device.

  iTunes could not connect to the iPhone "IPhone by Simon Young", because an invalid response was received from the device.

  You have upgraded to iTunes 12.5.1? iOS10 requires iTunes 12.5.1 find which demands in turn 10.9.5 OSX or newer.  Software update checks only the updates to the current version of the system that you are running but that itself can be updated.  It may or may not be possible to upgrade your computer to the system requirements. Find your computer on the web site of http://www.everymac.com model and near the bottom of the specification of the system section, he will tell what versions of the operating system, it is able to run. You can try to install the free El Capitan OSX 10.11.  El Capitan can run slower on older machines and require the additional purchase of RAM (4 GB is a minimum realistic and many recommend 8 GB).  Making a big jump in versions of system is also more likely to affect the old software.

  At el capitan Snow Leopard, it will make my macbook is slow?  - https://discussions.apple.com/thread/7412959

  Course OSX Upgrade General information, including configuration required - http://www.apple.com/osx/how-to-upgrade/

  If you have any generation of PPC software which works under OSX 10.6 it is not supported in later versions of the system.

• Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Then I reinstalled FCPX and some how the scale option is missing in the effects window. Can anyone help?

  Try resetting your preferences. Organize your Opt - Cmd launches the application. Post screen shots of what you see.

• How the process in two steps of authentication does not work if you are not in an area of cellular service

  Outside cellular service areas, IS those who know how the two step aunthicatuon process works in an iPhone 6, using the operating system iOS 9.3.4?  Would a being completely locked out of their iphone and apple services until they could find themselves in a cell service area? Or can it be accessed by a public wifi? Who beg to differ on whether or not it is beneficial to use when you travel?

  I did a little research to see if all Apple items shed light...

  See "How it works" in the Apple ID - Apple Support for two-factor authentication - a time that a device is approved, he'll never ask again unless you perform one or more of several things to "break the connection.

  If I were you, I would spend it TURNED off if you fear that one of these things could happen while you might not be able to obtain the code by SMS

  Frequently asked questions about the audit in two steps for Apple ID - Apple Support

  I'm confused as to why Apple would use two different expressions for what seems to be the same:

  • "Two -authentication"- and
  • "Two -step".

  The above two articles begin with a statement like: [underlining is unique, "BOLD" is synonymous with]

  "Two-factor authentication is just an extra layer of security of your ID Apple aiming to sure you are the only person who can access to your account, even if someone knows your password."

  «The two-step verification is an additional security feature for your Apple which designed to prevent anyone to access or use your account, same ID is they know your password.»

  Maybe someone with more experience can shed some light on your question and MY confusion?

• How the prisma app works on mac after downloading itunes

  How the prisma app works on mac after downloading itunes

  I don't think they have a Mac version. The following a https://itunes.apple.com/us/app/prisma-art-photo-editor-free/id1122649984?mt=8 present in the compatibility section in the left column that it is compatible with iPhone, iPad and iPod Touch. Applications you download through iTunes to a Mac would be then be synchronized the Mac one of these devices.

  Store applications designed for the Mac can be downloaded from the Mac App via the Apple menu > App Store and iTunes is not involved.