How to create a Select Case calculated field type

Similar Questions

• How to create a selection from a form on a transparency?

  I watched the video of Corey Barker "Adobe Photoshop: from scratch." Of the great stuff, except that it does the same thing in two different segments without explaining what it was - a real show-stopper for a beginner like me.

  E.g. "Lights" at 03:07. Here, he takes a transparency layer with a shape to this topic and creates a selection out of this shape/object, since he later creates a layer mask on another layer.

  I'm sure that it's simple, but exactly how do you create a selection out of the shape of an object that is on a transparency? Thank you.

  Press command (clover), then click on the layer icon in the layers panel. Or go to Select > load selection > layer of transparency (with the desired layer highlighted in blue in the layers panel).

• How to make the selection of the field to calculate the properties of the tab active

  I try to make a purchase order that will calculate the values of fields, but I can only select all form fields or not.  I got the trial AcrobatPro and it worked fine, but now I bought it, it does not work for me.

  Can someone please.

  

  Some people feel that for some reason any. You can try to use the SPACEBAR to toggle the checkbox and the tab key to move. You can apparently also use the mouse, but you will need to click anywhere near the border in checkboxes, so try to experiment a bit.

• How can I validate that a calculated field is equal to a specific number?

  Thanks in advance for your comments and advice. I have a calculated field that adds the sum of the two percentages (for example 25% and 50%). I want to validate these percentages is equal to 100%. Thanks, any help would be appreciated.

  You can use sometthing that personalized the calculation script:

  If {((+event.value)! = 0)}

  If {((+event.value)! = 100)}

  App.Alert ("the sum of the percentages must match 100 %.");

  }

  }

• How does "create and wire case unwired? I can't do anything...

  OK, I have a structure with a ton of events of the event.

  I just added a value that passes through IT. This value is a shift on the outside loop register.

  I see that when your right click the tunnel on the event... There is the switch to turn off 'Use Default if not wired'.

  I also see some options that seem to be doing what I want to do... and that's for cable all unwired connections on the other events with "Entry Tunnels Linkted"-> "create and wire Unwired case."

  When I click on it, the cursor changes to a new form... but here... I can't figure out how to make it work... I tried to do a right-click on the tunnel 'broken' for this purpose... I tried a left click in an event that is unwired... but nothing.

  Can someone help me out here... I think that's what I want... but can't make it work.

  Thank you in advance,

  Cayenne

  After clicking on create and thread, click on the terminal across the structure you want to feed the exit tunnel.  If it is already wired directly to the other tunnel, he'll know what you mean without the extra step to choose the side of the entrance.

• How to create a table content some field Manager?

  This is my code

       HorizontalFieldManager bigHfm = new HorizontalFieldManager (Field.USE_ALL_WIDTH);
          Bitmap  logo = Bitmap.getBitmapResource("imageComp.png");
          BitmapField logoComp = new BitmapField (logo,Field.FIELD_LEFT);
          bigHfm.add(logoComp); 
  
          VerticalFieldManager rightVfm = new VerticalFieldManager (NO_VERTICAL_SCROLL);
          bigHfm.add(rightVfm);
  
          HorizontalFieldManager topHfm = new HorizontalFieldManager(NO_HORIZONTAL_SCROLL);
          rightVfm.add(topHfm);
  
          HorizontalFieldManager ffm = new HorizontalFieldManager(Field.USE_ALL_WIDTH);
          rightVfm.add(ffm);
  
          LabelField label1 = new LabelField ("PT.Perusahaan");
          label1.setFont(titleFont);
          LabelField label2 = new LabelField (" - Jakarta, Indonesia",Field.FIELD_VCENTER)
          {
              protected void paint(Graphics g)
              {
                  g.setColor(Color.ORANGE);
                  super.paint(g);
              }
          };
          label2.setFont(containFont);
          topHfm.add(label1);
          topHfm.add(label2);
  
          RichTextField isiContain = new RichTextField ("Lorem ipsum dolor sit amet, consectetur adipiscing elit. Suspendisse in neque tortor, eget accumsan urna.");
          ffm.add(isiContain);
          isiContain.setFont(containFont);
  
          add(bigHfm);
  

  IM needing a loop code above... my opinion create code to the table... and simple to create a loop... need to create the code above table... or a class... no solution to my problem?

  That way, you can run the loop:

  public class Def extends MainScreen
  {
      VerticalFieldManager rightVfm[];
      int size=10;//assume
      public Def()
      {
          createGUI();
      }
  
      private void createGUI()
      {
          rightVfm=new VerticalFieldManager[size];
          for(int i=0;i		   

• How to create a select statement to the data in two tables?

  
  Hi all

  Table 1

  ID YEAR

  758 2013

  Table 2

  ID YEAR

  758 2014

  I want to create some that translates into two lines: function that does this?

  ID YEAR

  758 2014

  758 2013

  Thank you, best regards.

  Hello

  Perhaps a select * from table1 UNION ALL select * from table2 will help you.

  concerning
  Kay

• How to create a model of form field?

  It does not exist in the new version of the Document cloud? I would like to be able to add layers of form field to sign an invoice where account information is going to be different everytime I use the form - so the standard model will not work.

  Thank you!

  Hello Ttimmer,

  The form field layer is always available under the section of the template to create. Here is the reference for help:

  https://helpx.Adobe.com/document-cloud/help/reusable-form-field-layer.html

  -Usman

• How to create table selectable line or not based on the value of the line

  Hello.
  
  JDeveloper 11.1.1.2
  
  Is it possible to make a selectable table row or not based on a value in the line.
  
  That is to say. lets say that the row contains a Boolean LOCKED = TRUE.
  This line should not be selectable.
  
  A line whose value LOCKED = FALSE should be selectable.
  
  / Erik

  Erik,

  No particular reason to disable a selection of lines for a particular line? If I'm an end user, I would be clicking on the same line of thought again and again my mouse does not ;) (call me dumb :)). How do you differentiate this line (using inlineStyle / styleClass) based on the value of line? In addition, you can disable the other buttons when a row with a particular value is selected (so that the user knows that the selected line is not treatable).

  Arun-

• How to create the container element using Vi types in teststand

  Hello

  I want to create containers in the Array element in teststand, which different downhill element. for example I like, .txt file

  Name height, age, color

  A, 20, 186, black

  B, 30 170, white

  first line should be elements of the container, and the second line should be the value of the element. Raising must be string, number or boolean.

  Then, in the second container to new element in the first row and value in the third row.

  And all this container must be below the table of the fileglobals element or people of the country.

  Is there any suggestions how?

  Thank you much in advance.

  Kind regards

  Ankit.

  Hi Pierre,.

  I edited your VI test and successfully wrote the table of container to a variable existing non "Locals.dummy99" (see screenshot).

  Best regards

  Christoph

• How to create a digital control (of any type) which can be increased or decreased by a 'unit' at the same time?

  As in the title.  I want to create a digital control (no current limitation on its type) with a range of 1 to 10 (and a step of 1).  The only difficulty that I have, is that the user should only be able to increase or decrease 1 at any time.  Code initiated by this change of value must have completed at least once before that the value can be changed again.  This is because code of VI is mainly contained in a while loop and control are read once at each iteration and its last value should not differ more than 1.

  Is this possible with LabVIEW 6.1 and if so, how?

  One of the solutions that I came up with so far is to disable the control immediately after its reading, and to turn it on again immediately seized is read the next time (I have to assume that the user is unable to click twice before the control is disabled).  It is an acceptable method, or is there a better way?

  I also had an idea of partially disable a normal digital control, such that it could not be typed in - only arrows remained operational.  However, I'm not sure how.

  James

  Hi James,

  You can use the two buttons (by releasing latch) and a digital display that shows the current value. Button increased the value and the other decreases. Store the value in a shiftregister to work with her.

  I don't know if your solution would work because use may directly enter the new value.

  It will be useful.

  Mike

• How to create a survey online or for new customers?

  Hello

  I want to create a survey for my new graphical clients. I have a few business questions to new clients and need written answers. I want to stop sending a pdf form, is not well designed for an excellent online form.

  In fact, I know how to how I will present and send the page, but not for a tip: how to create an editable multiline text field online by someone Muse?

  I tried to use this type of text box of a contact form, but it is not effective.

  I tried a wuffoo embed widget, but I don't want to use an external service (like getosmosis.com, or something)

  I have well on the browser in editing, but I don't know if it's a good idea to do this, or really effective.

  I want to build a page scrolling with anchor points and a vertical menu sticking to the 10 chapters of questions and a "send" button at the end to receive the form in my Inbox mailbox, exactly like a message in a contact zone.

  You have an idea? Advice?

  Thanks for that, guys.

  Mikael.

  Forms are forms and editing in the browser has nothing to do with it. I'm afraid that you really need to use other services or sign up to a British Colombia account Pro, if it is really so important to you.

  Mylenium

• How to configure the inputComboboxListOfValues case-insensitive search dialog box

  Hi all

  I use Jdev 11.1.2.3.0

  I use a inputComboboxListOfValues in a fragment of page ADF

  When I click on "search...". "I can type what I'm looking for, but here the search is case-sensitive.

  How can I configure this case-insensitive field? can someone help me please...

  Thank you

  G.Shilpa

  Hello

  View the criteria it is checkbox " Ignore Case". Just to check this box and run the application.

  For more information, refer

  http://tompeez.WordPress.com/2012/08/20/JDeveloper-ADF-afinputlistofvalues-enable-case-insensitive-search/

  Thank you

  Nitesh

• How can I create a PDF form that contains data fields and calculated fields?

  Hello, I need to create PDF forms that has

  -Fields that are read from a MS SQL Server database, once the user enters a field other fields must be read from an underlying database

  -Calculated fields

  what PDF forms product supports this? Once this file created is also filling end-user which form has any kind of special licenses, otherwise he will be able to fill this with Adobe Reader?

  You need to expand the PDF form using Adobe LiveCycle Designer if you want to be able to connect to a database.

  And Yes, it should be possible to use the file in Adobe Reader after that.

  For more questions on LCD forms are trying this forum: LiveCycle Designer

• I cannot select the names of the fields calculated field options. When I try to use the simplified field Notation: change, there is no "OK" button after typing my calculation. Why I don't see these features. I have Adobe Acrobat XI - v11.0.13

  I have Acrobat XI and I'm not able to create calculated fields. When I use the value matches the section, then click on choose to select the fields, it does not select unique fields. I can click Select all or deselect all the... but that's all. So I tried using the simplified field notation and click on modify... the Java script box opens. I can type the script... but there is no options down to say OK or cancel. I don't see any of these options. Why I use this feature?

  Kimberly

  To select a single item from list click on it and then press the SPACEBAR.

  The other question is very strange... Try to run a repair installation.

  On 27 October 2015 14:06, "kimberlyf63795453" [email protected]>