How to put transitions between clips in a theme empty

Similar Questions

• PP will not let me add a transition between clips

  In many cases, PP is not let me drag / move (I don't know any other way) a video transition - as chained - between two elements. He let me just add the transition at the beginning of the 2nd clip, and not the end of the 1st.

  Very frustrating as my project has dozens of cross dissolves that I slipped and fell between the clips, and both of these are no different than all the others. They're both in the same video channel, the master of the same origin, are not nested. I have change some setting accidentally?

  What are the things I can try to address them?

  Also is it possible to add a video transition between two clips in different channels? PP only allows me to add late 1st or early 2nd, that is not the same thing...

  Is it possible to save a custom transition preferred to use again?

  PP CS6.0 | Mac OS 10.6.8

  Your clips have sufficient handles?

  Adobe Premiere Pro help. Overview of the transition: application of transitions

  MtD

• How to put a video Clip on the scale and avoid the deterioration of the Image?

  Hi, I'm trying to determine the best way to put across a number of videos in my sequence, so that I can ' digitally zoom "on the action and again, we hope to avoid degradation of the focus/sharpness of the image.

  My concern is that using the Scale-up effect, is to distort the images, that is stretching the pixels.

  (one of the clips that I tried to use the scale effect appears blurry and distorted, but it could have been a problem of automatic update, I'm not sure).

  Here are the details of my installation.

  I'm under PP CS5.5 on Windows 7, and I have a card Nvidia CUDA.

  I shot the video on a Canon Vixia HF/S21 in 1920 x 1080 p at 24 Mbps (Canon calls this MXP and the 'p' is not native, is "drop-down" menu inside the camera).

  My output will be h.264 for the web. I'm fine with the dimensions of the output at 1280 x 720. The output doesn't have to be 1920 x 1080, BUT it would be nice IF I could the 1920 x 1080 output while keeping the image sharp and vivid. If 1280 x 720 gives better results then I'll do it.

  So my questions are the following:

  (1) using the scale effect PPCS5.5 result in a distortion of the image

  -It causes the image to get blurry, less sharp/crisp?

  -(I'm scaling the clips of 50-70%)

  (2) is it interesting to define the parameters of the sequence at 1280 x 720 (instead of match clips at 1920 x 1080)?

  -My thought is to set the parameter sequence to these Dimensions of lower resolution and I can get a 50% scale upwards by simply * not * using 'Ladder to the chassis' on the clips I want 50% furred.

  If you shot 1080 and 720 is finished, allowing some flexibility to scale.  PR calculates scale in two ways, which is very confusing.  If you set your sequence on 720 and preferences to the default scale to the size of the image, all the clips in 1080 you will add later will show 100% in control of the effects > tab, movement, even if the Pr has put across your footage in 1080 at about 45% to frame 720.

  I suggest you uncheck default scale to the size of the image.  Then, when you add your 1080 videos to your 720 sequence, it will be scaling to 100% (for real) and it will be bigger than your raster 720.  Only by doing so you know if you climbed your film beyond 100% when you are panoramic and analysis later.

  Your first clip to meet the sequence, copy and use attributes to paste on the rest of your clips in 1080 to bring to the 720 frame scale to the bottom of the scale.  Then you can make adjustments from there.

  BTW, there is an article on the Adobe site how the CUDA scaling is greater than Ps and Ae scaling.  Maybe someone can find the link or you can search the site from her.

• How to put spaces between a stack of icons social media?

  On the next page of test

  http://www.shyamasundaradasa.com/Jyotish/temp/Untitled-1-Delete.html

  you will see on the right side are 7 icons to different social media. If they were horizontal, then there would be a small space between them, but not so much when vertical. This becomes a problem on a smart phone because they are small and touch.

  I tried to put "/p > < p > < ' (for some reason any text I put between the < p > < / p > does not appear ) between them but there was too much space. However, I have to make a div container, then a div with padding for each, but it seemed awkward and I thought there must be another way.

  Will there be an elegant solution to put a space between them?

  Branko VL

  Post edited by: Branko VL

  Try this:

  #recommend span {}

  padding-bottom: 5px;

  }

  This target span tags in #recommend div and add only padding-bottom, thereby offsetting each 5px span element.

• How to put the split clips separately?

  I use first Elements 9 for Mac. I can divide the clips very well, but how to record clips newly created into a separate file? I want to use them in a different project. I want to also these small clips stand individually on my area of working space in case I decide to reposition in a place later in the film.

  I've renamed the clip on the timeline bar successfully, but it does not appear in a separate file in my workspace or anywhere on my hard drive. I also tried to copy and paste, but after it copies, there is no option to paste. I tried to drag and drop to the area of space of work/video clip, but he refused.

  Help please!

  Welcome to the forum.

  After your cut, you can then share (to the required file format) and the WAB (work area bar) allows you to limit this sharing (Export).

  Good luck

  Hunt

• I'm having a problem with a transition between two clips in the first.

  I put a transition between two clips, but it works only in a single clip. my project is almost done except to fix those errors.

  

  The handles are how you have before and after the section of the video images you removed in the timeline.

  Imagine you put a video in your editing and you use the clip (from the beginning to the end). Then you try and add a second 2 cross dissolve between the shots. First will have to at least 1 second image to prior to the shooting to make the transition, but because that there are no images more to use is unable to dissolve it in the middle of the Cup.

  You can do it all on a track just like FCP of Vegas, but you must have the images it to dissolve in.

• How can I add a transition between each item in the items 11 first?

  Greetings-

  Folks, I'm looking for a feature that even the old Windows Movie Maker used to have cheese.  I'm trying to figure out how to get first elements 11 to add a transition between each clip, by any means of quick shortcut.  I think it's rude and unhelpful that I need to manually drag a transition between each element.  If I import 200 short films that I took with my point and shoot camera, it'll take me more than one hour alone just to put transitions in place.

  Is it possible to select a transition and have Premiere Elements add it between each clip?  I have stumbled upon the fact that you can click on a transition and make the "Default", but were not able to understand what this does for me.

  Any help is appreciated.

  Thank you.

  Andy

  As I showed you in my book, you can select all the clips you want a transition between, right-click on the group, and select apply the default Transition, and it will be applied between all the clamps.

  You can define a transition to the default by right clicking on it in the Panel of Transitions.

• newbie question. How to insert equal spaces between clips?

  Hi forum,

  I've not used After Effects for about 10 years and now I'm back with baby steps so be patient and gentle if I don't get quickly.

  I created a simple composition with a bunch of clips one after the other. They're all on different layers which I think is how it is supposed to be. I want to put a space of equal time between each clip and I want to make a transition between images and adjacent clips on this space.

  I've spaced the clips by dragging and gaps between them trying to be equal to the eye, but would like to know if there is a distribution function that makes it easier and better.

  You can adjust the overlap with layers in the sequence to a negative number or a positive number. I keep my calendar set to executives. Just follow this movie and you'll see how your layers in sequence. BTW, length of layer is not serious, but they must be arranged so that they start to the first frame of the timeline for the overlap be precise.

• How to create a transition between slides to scroll smooth again Keynote?

  In previous versions of Keynote, it was possible to create a scroll of transition between slides. From left to right or top to bottom.

  Now the closest thing seems to be "moving" and what it does is create an effect where a slide slides across to reveal the following. This does not create the smooth effect, I'm trying to get.

  Anyone know how I can hack it, or recreate it in the latest version of Keynote?

  If I came close to understanding your needs, I suggest to try the PUSH transition.

• How to put clips in split

  After the "Split video" ing a video scene, how to record the individual clips as separate files on my hard drive?

  The best way to do it is with the WAB (work area Bar, little support at the top of the script), and then just share/export to the desired format/CODEC and in export/actions settings, choose Export bar working area. You name it and locate the exported file.

  Good luck

  Hunt

  See attached for the look and location of the WAB:

• How to share files between Win 7 computers in the same workgroup without set up homegroup?

  How to share files between computers to win 7 in the same workgroup, without setting up any homegroup?

  We tried to avoid putting in place the homegroup. Because we fear us will not be able to share files between win 7 homegroup computers and Vista & XP?

  Thank you.

  Ok. We got it to work.

  In the folder tab property shares.

  Click on 'Share' - choose people to share with, click on the drop down tab, select 'All', click 'Add', in the table below, to the right of everyone, click on the "Permission level", we choose 'read '. Then, in the background, we click on "share". The next dialog box is 'your folder is shared', click 'done '.

  Click on 'Advanced sharing', [x] check share this folder. Click on 'OK '.

  Then, click on 'OK' to the folder property.

  Then, your folder is shared on your network working group of Win 7.

• The transition between two objects with color gradient

  Oh no! I want to make a smooth transition between objects of gradient color, but you can see a line. How can I make a smooth transition? It is not a transparant-gum... Please help me!

  

  try to use a gradient instead of the net?

  You can use the path search tool to convert forms in one section, then gradient to create the dark lines where are the current limits.

  Or you can use "pen" one of them, to blend the overlap, but you may need to add the pen to a slightly larger copy of the object and your current border point to create a mask in order to keep the edges you want to stay strong and just leave an edge of more than in the other form.

• CP9 sensitive project - where are the transitions between slides?

  Transitions between slides are available via the sync Panel when you create a blank project (unfounded).

  Where are the transitions between slides when you use a sensitive project? The distribution Board is not in the property inspector.

  Certainly, it is always possible to add a transition between slides for a sensitive project? If so, how?

  The slide transitions are not supported for projects of a reactive nature, they are not yet supported for the release of HTML5. The distribution panel is available (at least in the Expert user interface), you can apply a transition, but HTML5 Tracker will indicate that this is not a supported feature.

• Transition between tracks?

  I'm new on the first and I'm not looking for an answer to this. When I add a transition between the elements that are on the same track, I can drag so that the transition occurs exactly in the middle of the two clips (centered about to break) then two clips together more harmoniously. I can also adjust the duration of the transition or the points of beginning and end as usual.

  But when I try to add a transition between the elements that are on DIFFERENT titles (even if they are still one after another), I don't have the possibility of having the transition appear completely at the end of the first clip or completely at the beginning of the second clip. It does not allow me to drag 'in between', so it will melt away. Is there a way to do it or what I spend all my videos at the same track?

  I opened the effect settings and I can adjust the length of the transition, but she still does not allow me to actually cross the transition between two tracks. I see an option in the controls, called ALIGNMENT and it seems that would be where I would be able to change that, however, it is grey when the clips are on different tracks. Any thoughts? Thank you!

  If you want to add a transition double-sided clips must be on the same track.

  http://help.Adobe.com/en_US/PremierePro/CS/using/WSE2A9B838-1422-4d8a-9A03-CFDF4332533B.ht ml

• BD menu with transitions between pages?

  Hello

  Can someone tell me if has) it is possible to have a video of transition as I navigate from one page to another in a multiple page menu. and (B) if it is posible to have a video transition between pages, y at - it somewhere that would help to guide me through the process of creating documentation?

  For example, let's say I have a second video 21 for my menus. Page 1 I want the video loop of the second point at the 10 second point 5. So if I select page 2 the video should play 10 seconds to 11 seconds and then a loop from 11 seconds to 21 seconds. If I select the first page that still would play the video of 21 seconds to 22 seconds then a loop from 5 seconds to 10 seconds.

  If this is possible, or if there is another way to accomplish this please let me know.

  Thank you

  Lou

  Hi all

  Here are answers to your questions for me hopefully:

  I have attached the test project again and is active and the After Effects project that created assets: http://dl.dropbox.com/u/19880923/BD_Menu_Test.zip

  Link to assets when / if prompted.

  The workflow that I use is:

  1. create motion menus in After Effects.

  2 make out like H.264 Blu-ray/MPEG2 Blu - ray. *.

  3 button create underlines in Photoshop using a frame in the menu as a placeholder.

  4 when you're done, delete the placeholder. The final .psd are "highlights only.

  5 create a new project in Encore.

  6 file > import as > Menu import * all * the menus at once.

  7 file > import as > asset import * all * proposal background/button passes only once.

  8 file > import as > timeline import movie Timeline/s.

  9 double click on each menu and link it to its video backgrond using Motion tab.* *.

  10 link each button to the timeline/s or Menu/s.

  11 set the correct video clip for each button Transition using the Transition tab.

  12 the Ctrl + Alt + space to preview collects *.

  13. Ctrl + Shift + L to check the project.

  14 fix any problems reported or read during #12 and #13.

  15 create a .iso.

  16 burn the image with ImgBurn .iso file.

  Most the time, I went out to the QuickTime Animation and use Adobe Media Encoder to transcode the assets.

  * In still, remove the two buttons manually from "00_Intro.psd."

  Yes, the crappy Preview in still is and I see the black video all the time when you use the Transitions button.

  All files in this project is transcoded into Adobe Media Encoder using the x 264 BD Pro module. (using the bundled H.264 Blu - ray or MPEG2 Blu - ray gives me the same results, iow no video black.)

  The menus in a loop, but do not use any Point on the line specified in yet.

  That's all what I do and I don't think that I have a special recipe. One thing I always do is to first import the .psd active second and third timelines. It didn't matter when it came to motion menus in even 1.0 or 1.5, and I always use this recipe when it comes to import.

  I see the same good results with 1080i25, 720p50 and 1080 p 24 (23.976). (The project that I've downloaded .iso 24.0 fps.)

  And, I never create a new project and import assets to test things and then remove the tips and deadlines and import new asset in this project, when they are done. Only, I jump in again and begin to import things when * everything * is ready to go. I never even use for transcoding, I bring only in the transcoded elements that are ready to go. Remove and re-import the other assets was (is?) a good recipe for disaster in yet. Removal of delays and create new ones has been a nightmare.

  That's what I use:

  Player: OPPO BDP-93EU

  Media: Verbatim BD - R (Verbatim #43712)

  BD-burner: HP BH30L of BD - RE (it came with the HP Z800)

  I had it makes me know that once a person had the same problems that some of you have, iow paused and video black with BD disc I created. I guess I haven't done too many BD drives. I don't know what drive Blu-he had used. About a year ago. I tested my BD drive in the Oppo, n, Sony, Philips drives and disc no problems. Everyone has been new players of 2011-2012. I'm afraid I don't remember the exact player models.

  It happens from time to time I do not see the black video, but when we look more closely it is me who has returned on the black frame of After Effects. So it's easy to do evil, so import clips into Premiere Pro and rub the clips looking for video at the end of the clips black is a good habit to keep out the clips.

  But, without a doubt, this is an issue that will be fixed in all readers of comics can be used without any problem.

  Please send a bug report or feature request to Adobe here: https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

  In my opinion, send a feature request is the best way to go.

  / Roger