How to read the jad file property

Similar Questions

• How to rename the JAD file to eclipse MIDlet name

  Hi, expert,

  at the present time, our product team asks me to change the product name of the name of one to the other, I changed the title in the properties of the eclipse project and thought that's it. Cod file name was still the same as before.

  Then I discovered that I was wrong. The name options-> list of applications is still the old name. Then I change the COD file name (the name of the JAD file is also modified with it) and thought that I would be ok this time.

  I was denied again. The name on the download of air link always displays the old name and found out that the JAD stll MIDlet-name file has the old name and browser would use this name. Options-> application list, it still shows the old name. So I have to change the name of the MIDlet-name for the new name. However, I couldn't find a way. on the descriptor xml project, there is a tag called MainMIDletName, I changed to the new name:

  However it does not seem to help as well. After research, I found this link, but it does not say exactly how do without changing the name of the project that I really don't want to do:
  http://supportforums.BlackBerry.com/T5/Java-development/how-to-rename-JAD-in-JDE-Eclipse-without-ren...

  I have a few choice here? Any help would be appreicated.

  Hello

  To have the "MIDlet-Name" of the renowned JAD property, you will need to rename the project. Output file names can be changed via the BlackBerry_App_Descriptor.xml > Build (tab) > name of the output file (field).

  Kind regards

• How to force the jad file to be regenerated for each version

  I use Eclipse with the BlackBerry plugin.  Whenever I build the project active BlackBerry (Alt + B), it seems that Eclipse rewrites the file jad (the timestamp on the changes to the file), but the contents of the jad file is not re-written!

  I use the version string in the BlackBerry project properties to contain the version of my program.   But I find that even if I change the version string in the Properties window (and I can verify that the value has changed by looking in the file jdp), when I build the active project of BlackBerry, the MIDlet-Version string in the jad file does not change.  Yet if I delete the jad file and rebuild the project BB, then the jad file is written with the correct version string.

  It would be really nice if the build has successfully written the jad file, but short, how can I automatically have the deleted jad file?  As a matter of procedure, I usually do a project to clean and build together, before you build the active project BB.  Is it possible to change the Eclipse-specific procedure to remove the old jad file?  Is there a solution other/better?

  In addition, RIM - the fact that you do not write correctly the version string for the jad is a BUG!

  Thanks for the reply, but no, this link was not helpful.  There is no what I already know and have already said, with one exception - the problem, they talked was in the JDE and they suggested using the plugin - BAD NEWS - the plugin has the same BUG.

  What I did to make it work, it is write a cmd file that removes the jad and a few other files and set the absolute path to the cmd in the field of pre-build of project properties.   NOTE that the commands of the del in the cmd file must all also the absolute path.  I tried initially have an order of cd's as the first line of the cmd file, but that has not changed the directory - all the following commands continued to be run from the directory where the file of jdw.  I also tried put an led with an absolute path command in the field of pre-build directly (rather than using a cmd file).  Any work the del command.

• OSB: How to read the xml file, which is in OSB project

  Hello
  
  We have a generic proxy (PG1) reporting and deals alerts, this proxy is called in the pipelines of proxies anothers (P1... PN) in several projects. Each client proxy (P1... PN) PN) before call proxy PG1, configures a variable with syntactic alert or report.
  
  We thought it would be a good idea to store the specifications for all the proxies of a project as an xml file, so that the proxy PG could read the xml file. This file will be in the OSB project.
  
  The questions are:
  -proxy can read a xml file that is in the OSB project?
  S ' Please, are all the documentation for this?
  
  Thank you
  
  Kind regards

  You can always do customization to work with the properties defined in a XML xquery. The key to this is to use the customization of reference instead of find and replace the customization, similar to the service account customizations.
  Keep your real estate to as properties_dev of env xquery specific xmls, properties_sit etc then apply customization of service proxy xquery reference reference specific correct env.

• How to read the custom file Jad jad attributes?

  Hi all

  Please help me.

  I need to read the custom JAD JAD attributes frm file.

  I use this code

  "

  AllGroups [CodeModuleGroup] is CodeModuleGroupManager.loadAll ();.
  CodeModuleGroup myGroup = null;
  String moduleName = ApplicationDescriptor
  .currentApplicationDescriptor () .getModuleName ();

  for (int i = 0; i)< allgroups.length;="" i++)="">
  If (allGroups [i] .containsModule (moduleName)) {}
  myGroup = allGroups [i];
  break;
  }
  }

  Get the property
  Var description As String = myGroup.getProperty("MIDlet-Description");
  Custom string = myGroup.getProperty("My-Custom-JAD-Property");

  "

  Copy the following code gives the 'description' string value, but NOTHING is coming when I read the string "Custom".

  Let me know, where I'm wrong.

  Kind regards

  Ashutosh

  Good to know that he has worked through the OTA.

  4.2 versions below there is no workaround for it.

• How to read the txt file that has words in between?

  Hi all

  I'm using Labview 8.2.

  I would like to read a text file.  I have given (after whenever he was on average more than 100 waveforms) several times recorded on the file.  The idea is to further improve the SNR in post processing by averaging once again the data (which was on average about 100 wave forms).

  I can get LabView to save the data in the file several times, then it keeps joins.

  The problem is to read data from labview, so I can on average now again.  The problem is the labview separates data sets with the following:

  "Channel 1".
  9925 samples
  Date 28/10/2008
  Time 17:16:11.638363
  X_Dimension time
  X 0 - 3.0125000000000013E - 3
  Delta_X 2.500000E - 6
  "End_of_Header."

  Then when I read it, he sees only the first set of data.

  Can someone tell me please how to read all the datasets under labview?

  I am attaching the file I want to read 'acquiredwaveform.txt' and the VI base (really basic btw) to play the file.

  Thank you

  This seems to be a standard LVM-file.  You can read segments of different data using the VI Express LVM loop (make sure that the file retains its extension .lvm).  I modified your example to show this.

  Note that my example is quite inefficient. Table of primitive construction causes a massive memory copy whenever it is used, and you would be probably better on average that you read in.  I made this way to make it more obvious how read segments of a file LVM.  In the process, I noticed that you have a good amount of phase jitter (zoom in on the graph of all the three waveforms).  With an average simple will make you smear on your waveforms.  You can either fix the problem in hardware (recommended) or phase shift your data so it lines up before on average.  If you need help with it, let us know.

• How to read the map file?

  Hello

  I have a mapping file to the linker with some data as below

  File name: Load.map

  ABC 2000 b 598

  BBB 20009672

  My requirement is to read the hexadecimal value when an entry is given.

  Inuts are 'ABC' or 'bbb '.

  Example: entering "bbb-" is given then 20009672 should be displayed in the indicator.

  Please let me know the solution because it is very urgent.

  Thanks in advance,

  Krishna

  

  It's really basic things - both with LabVIEW and file reading/Bay of manipulation in general. Check the tutorials.

• How to read the data file

  Hello
  I have red the DBW do that beside Scripture, is that correct?
  
  Thank you

  Jin

  DBWR writing data in data file... hope that the server process reads the data from the data file...

  Kind regards
  Deepak

• How to read the particular file workflow ID?

  Hi all

  I'm currently reading case workflow ID (E.g.: two folders are there library & MyWorkflows, I want to read MyWorkflows workflow ID). Below the code, I saw, but it returns all workflows of VCO.

  var workflowId = "";

  var workflows = System.getModule("com.vmware.library.workflow").getAllWorkflows();

  foreach(var wf in workflows) {

  if(wf.name == workflowName) {

    workflowId = wf.id;

  }

  }

  -Comprehensive summary at: http://www.virtuallyghetto.com/2011/12/how-to-find-VCO-workflow-ID.html#sthash.hFsdSKh1.dpuf
  Thanks in advance,

  Add an entry to your workflow in the workflow type category (workflowCat1)

  cat1Workflows = workflowCat1.workflows;

  Then you can iterate through them.

• How to read the ICC files?

  I need help!

  I have regularly transfer and change (with CS5 64-bit PrPro) HS card MTS files in the Panasonic AG-HMC150P camcorder. Recently, I needed some information of clip that are stored on the same card in the PRIVATE directory > AVCHD > BDMV > CLIPINF in the files numbered in the order of 00000.CPI. I couldn't find any way to access this information, even after many consult Adobe Help files and the U2U forums and also the Internet. (I read some comments about first items 10 and first Professional CS6 for that - but I PrPro CS5.)

  Thank you very much

  LACI.

  In the project window

  Open the metadata in the first screen.

  Go in the Exif section and choose what you want to display in columns.

• How to read the dump file created by BSOD?

  Original title: BSOD help

  Hello, I recently got a BSOD, and I'm not great at deciphering the again.

  This is the dump:

  http://www.filedropper.com/121015-15163-01

  Could I get some help to find out what is the problem?

  Driver, checked and associated with 000. FCL CyberLink FCL driver Cyberlink Corp.  Yours is 2013.

  I would just like to remove Cyberlink

• How to read the files on time capsule

  How to read the files on time capsule from iPad?

  Thank you

  Using an application like navigation on the iPad. More info here:

  Stratospherix - FileBrowser - overview

• How to read the VI Analyzer config file?

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  Kaspar says:

  Hello

  How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

  If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

• How to read the date and time of a file by labview information

  How to read the date and time of a file by labview information? for example, time created and updated time.

  The similar question had already spoken here (this is the old thread but still seems topical):

  http://forums.NI.com/T5/LabVIEW/file-date-created/TD-p/109836

• JAD params of the reading of the JAD file that is changed after the cod file is built?

  Hello

  We have a requirement in which, you must change the jad file, after the cod file is generated.

  But when I try to do is not able to read the newly added params to MIDlet.getAppProperty() . He can read the jad attributes that were there in the jad file before creating the cod file.

  Example:

  existing JAD has "KeyA" whose value is "A." Now package for the project and generate the blah.cod file

  Add a parameter more "KeyNew" with the value "ValueNew.

  Print the source MIDlet.getAppProperty("KeyA") andMIDlet.getAppProperty("KeyNew")

  Step 1. Existing.jad

  KeyA: A.

  Step 2. Build the cod

  Step 3. Add another parameter to Existing.jad

  KeyA: A.

  KeyNew: ValueNew

  Step 4. Existing.jad of charge using javaloader.

  load Javaloader u Existing.jad

  Step 5. Run the application

  Actual output: it prints only a. and not ValueNew

  I read that this is possible in JDE 4.3 + and I'm working on JDE 5.0

  Help, please.

  ~ Joey

  Apparently it only works if we install the Jad with Javaloader file. Having an installation OTA of the Jad file works.