Similar Questions

• How to use external fonts in SVG?

  Hi all

  I have a bit of a struggle to understand how to use external fonts in SVG documents.

  I first tried incorporating that the fonts in the document () by JSR 226, but then it appears that this is not supported on the BB, (quite old) documentation says you can xlink to an external file and gives an example:

  I'll start by saying I have absolutely no experience but will see if I can help you and learn something too.

  I looked at the http://www.w3.org/TR/SVGMobile12/fonts.html and at the bottom it shows how to use a SVG file for the police. If you used then "javax.microedition.m2g.ExternalResourceHandler" you could load the SVG and use it to move the 'police' to the ScalableImage and get your SVG rendered (theoretically).

• I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code?

  I have 5 html pages that share a common header, footer and sidebar. How to use my navigation bar to change the content of the body without duplicating a lot of code? Thank you!

  Read the help section of DW on models.

  Using Dreamweaver | Creating a Dreamweaver template

  Or use Server-Side Includes

  Nancy O.

• How to use reveal all this without losing the work of culture?

  My workflow is to editing and cropping of images. I need the flexibility to perform any order.

  When I use the crop tool, I continue to delete the cropped Pixels unchecked. When I edit the images I want to edit the complete picture, not cropped image.

  If I use reveal all to make alterations on the full image after cropping, I lose my job of cropping. Is there a solution?

  How to use reveal all this without losing the work of culture?

  How to take a bath without getting wet?

  Enter drollery side you could use a path of access to store the current size before calling "Reveal everything", then later on the path as a selection of load, switch to the crop tool and hit.

  Or convert to smart object before you crop, then do the editing in the SO (it could be a potentially significant increase in file size, however).

• How to use Google fonts not in an H tag?

  How are you?

  I ask this question because Im printing h tags have attributes that come with to make it as a paragraph, right?

  I'm looking to make a few words - a Google font and a legend. How would this apply to a div? Inline? Or a new css rule? Both?

  I'm not good at handcoding CSS, so that is why I ask.

  I have the Google font in my CSS and call a few HTML headers h1, h2, h2 him fine. How to set the text not in a tag: police in Google?

  (Yes, I think it's a great answer, but not too knowledgeable on this subject)

  In addition, DW CS5 doesn't have some kind of support to make the Google font a selectable in the menu drop-down?

  Use the CSS classes.

  . Google {}

  Google font rules go here...

  }

  HTML:

  This section uses google police

  This topic uses google police

  This topic uses the standard font

  This section uses standard fonts

  CSS classes appear in the drop-down list in your properties panel.

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

  http://Twitter.com/ALTWEB

• How to use Google Fonts in email?

  Hello

  I would like to know how I use the google font in my emails.

  We use ubuntu police and I see the fonts on my computer but after sending an email change fonts.

  I use the SmartTemplate4 addon.

  I hope that all f you know the answer!

  Thanks in advance

  It would be useful if you have linked the articles you found before you write. If I know you already read about it, I would have not spent time looking for you.

  The items I linked to are quite detailed. I doubt that this would trigger the SPAM detection, though - that's just my opinion of many years dealing with SPAM.

  Regarding your last question, well, only you know why you would need it in the first place. It took years for people (and the email clients) even consider using HTML, fonts are another component of this discussion (ie. content vs presentation/container). Personally, I don't receive e-mails with too much formatting.

• How to download Tamil fonts and tell me the correct sites to downlod. I ' using windows 8

  I don't know how to download and install Tamil fonts for my system. I am using Windows 8. Tell me the correct site to do so. Please give me a solution?

  Hi Viji,

  Thank you for choosing Windows 8 and give us the opportunity to help you.

  I see you want to download the Tamil language on Windows 8 pack.

  I suggest you go through the article that says how to download from Control Panel in windows 8. Here is the link for your reference.

  Languages in Windows 8 and Windows RT

  http://Windows.Microsoft.com/en-us/Windows-8/language#1TC=T1

  You can also download the pack of Tamil language directly from this Web site. Go through the link for your reference.

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=3b1ce5e0-2514-4FE7-8c70-355f7ab22471&displaylang=Ta

  For more information about language packs, please get back to us. We will be happy to help you.

• How focus a JavaFX Group properly and set the pivot (reverse) by using translations in 3D space?

  Description:

  I m referring to the Oracle tutorial http://docs.Oracle.com/JavaFX/2/transformations/jfxpub-transformations.htm using the transformations.zip source code, which is available for download on this page. I Don t understand why they Center the xylophone in space 3D like this and why they calculate the pivot (reverse) using translations. So they are creating a large number of groups, including rectangles, representing the xylophone, in addition to finally to a group called "cam".    

  class Cam extends Group {     
       Translate t  = new Translate();     
       Translate p  = new Translate();     
       Translate ip = new Translate();     
       Rotate rx = new Rotate();     
       { rx.setAxis(Rotate.X_AXIS); }     
       Rotate ry = new Rotate();     
       { ry.setAxis(Rotate.Y_AXIS); }     
       Rotate rz = new Rotate();     
       { rz.setAxis(Rotate.Z_AXIS); }     
       Scale s = new Scale();     
       public Cam() { 
            super(); getTransforms().addAll(t, p, rx, rz, ry, s, ip); 
       }     
  }    
  
  final Cam camOffset = new Cam();    
  final Cam cam = new Cam();    
  ...    
  camOffset.getChildren().add(cam);    
  ...    
  final Scene scene = new Scene(camOffset, 800, 600, true);    
  ... 
  

  The Group "cam" is added to another group called "camOffset", which is added to the 'scene' as root the node.

  Until there , everything is understandable to me, but there is a method, called "frameCam (.)" which calls 4 other methods: ""

  public void setCamOffset(final Cam camOffset, final Scene scene) {         
       double width = scene.getWidth();         
       double height = scene.getHeight();         
       camOffset.t.setX(width/2.0);         
       camOffset.t.setY(height/2.0);     
  }    
  
  //=========================================================================    
  // setCamScale    
  //=========================================================================    
  
  public void setCamScale(final Cam cam, final Scene scene) {        
       final Bounds bounds = cam.getBoundsInLocal();         
       final double pivotX = bounds.getMinX() + bounds.getWidth()/2;         
       final double pivotY = bounds.getMinY() + bounds.getHeight()/2;         
       final double pivotZ = bounds.getMinZ() + bounds.getDepth()/2;         
       double width = scene.getWidth();         
       double height = scene.getHeight();         
       double scaleFactor = 1.0;         
       double scaleFactorY = 1.0;         
       double scaleFactorX = 1.0;         
  if (bounds.getWidth() > 0.0001) {            
       scaleFactorX = width / bounds.getWidth(); // / 2.0;        
  }        
  if (bounds.getHeight() > 0.0001) {            
       scaleFactorY = height / bounds.getHeight(); //  / 1.5;         
  }        
  if (scaleFactorX > scaleFactorY) {            
       scaleFactor = scaleFactorY;         
  } else {            
       scaleFactor = scaleFactorX;         
  }        
       cam.s.setX(scaleFactor);         
       cam.s.setY(scaleFactor);         
       cam.s.setZ(scaleFactor);     
  }    
  
  //=========================================================================    
  // setCamPivot    
  //=========================================================================    
  
  public void setCamPivot(final Cam cam) {        
       final Bounds bounds = cam.getBoundsInLocal();         
       final double pivotX = bounds.getMinX() + bounds.getWidth()/2;         
       final double pivotY = bounds.getMinY() + bounds.getHeight()/2;        
      final double pivotZ = bounds.getMinZ() + bounds.getDepth()/2;         
  
  //*1*        
       cam.p.setX(pivotX);         
       cam.p.setY(pivotY);         
       cam.p.setZ(pivotZ);         
  //*1*        
  
  //*2*        
       cam.ip.setX(-pivotX);         
       cam.ip.setY(-pivotY);         
       cam.ip.setZ(-pivotZ);         
  //*2*     }    
  
  //=========================================================================    
  // setCamTranslate    
  //=========================================================================    
  
  public void setCamTranslate(final Cam cam) {        
       final Bounds bounds = cam.getBoundsInLocal();         
       final double pivotX = bounds.getMinX() + bounds.getWidth()/2;         
       final double pivotY = bounds.getMinY() + bounds.getHeight()/2;         
       cam.t.setX(-pivotX);         
       cam.t.setY(-pivotY);     
  } 
  

  If the method ' setCamScale (...) 'is understandable,' setCamOffset (...) ' puts the root node ('camOffset') in the center of the screen, but I Don t understand the 2 following methods at all. Of course, the child ("cam") is not centered, by putting just the root node ('camOffset') in the center of the screen, but how they focus the xylophone / "cam" and set the pivot, using translations:

  Questions:

  1. Why they use 3 different translations (', 'ip', 'p')?
  2. Referring to ' setCamPivot (...) ': Why they are the first translation of 'cam.p' to "pivotX", 'pivotY' and 'pivotZ' and then 'cam.ip' to '-pivotX', '-pivotY' and '-pivotZ' (marked in the source code with * 1 * and * 2 *)? Should he not just put the Group at his position, where it has been positioned before, as if the method has never been called? That would be my guess, because I expect that an object is placed in the same position as before, if I first move with the values X, Y, Z and then return with the same values - X, - Y, - Z in the opposite direction.
  3. Even with the method ' setCamTranslate (...) ' ': Why use another translation "cam.t", moving the Group ("cam") with the same values "-pivotX', '-pivotY' (and not '-pivotZ'), which they used in the"setCamPivot (...) method `?

  Annotations:

  Of course it works, the xylophone is located in the center of the screen and could turn perfectly, without change of rotation point / pivot point, but I Don t understand how they did it. I read everything about layoutBound, boundsInLocal, boundsInParent, blogs about page layout and page layout goes into javaFX https://blogs.oracle.com/jfxprg/entry/the_peculiarities_of_javafx_layout and http://amyfowlersblog.wordpress.com/2011/06/02/javafx2-0-layout-a-class-tour/ and finally a large number of questions to stackoverflow, but I still Don t understand the meaning behind the methods stated.

  Before the call of ' frameCam (...) ', they ask:

  double halfSceneWidth = 375;  // scene.getWidth()/2.0;     
  double halfSceneHeight = 275;  // scene.getHeight()/2.0;    
  cam.p.setX(halfSceneWidth);    
  cam.ip.setX(-halfSceneWidth);    
  cam.p.setY(halfSceneHeight);    
  cam.ip.setY(-halfSceneHeight); 
  

  I deleted these lines, because it doesn't change anything.

  The base in place, is that there are three defined different rotations, one around each axis. Of course, these could be combined into a single rotation, but doing so would make the geometry in the mouse dragging very complex managers. As it is, the degree of rotation around each axis can be calculated and changed independently.

  In general, the rotations are defined by an angle, an axis and a (pivot) point. The axis is a 3D vector and goes through the pivot point; the rotation is around this axis through that point.

  In the configuration in the example, the pivot of each of the individual rotations is set to the default (0,0,0). Because we really want the rotation to be around the center of the group, not the original, the Group translates first point appropriate pivot (ip), the rotations are applied then (around (0,0,0) after translation by ip), then the group is reflected in its location of origin (p). These operations are not commutative, yes show ip, then the rotation, then p is not the same as when you run ip, then p, then the rotation (in the second, ip and p would cancel and rotation would be about (0,0,0) instead of around the Center).

  For good measure, there is a scale, that is also applied after ip (so that scaling occurs from the Center, not the original) and then a final translation.

  The final effect is that there is a lot of transformations that can be controlled independently. There is a scale (s), a rotation about each axis (rx, ry, rz), and a translation (t). The p in translations and its inverse ip are just "housekeeping" to ensure that rotation and scaling are done from the center of the screen, instead of (0,0,0).

  So:

  1. Why they use 3 different translations (', 'ip', 'p')?

  p and ip are translations for the rotation and scaling are done from the Center and not to the origin. t is a general translation, the user sees.

  Referring to ' setCamPivot (...) ': Why they are the first translation of 'cam.p' to "pivotX", 'pivotY' and 'pivotZ' and then 'cam.ip' to '-pivotX', '-pivotY' and '-pivotZ' (marked in the source code with * 1 * and * 2 *)? Should he not just put the Group at his position, where it has been positioned before, as if the method has never been called?

  He puts the group to its original position, but other changes are between p and ip. These transformations behave differently (in a planned way) because the group is translated when they are applied.

  Even with the method ' setCamTranslate (...) ' ': Why use another translation "cam.t", moving the Group ("cam") with the same values "-pivotX', '-pivotY' (and not '-pivotZ'), which they used in the"setCamPivot (...) method `?

  The t values are changed in the mouse Manager (with alt-middle mouse button-drag, which I can't test actually using my trackpad...). As you have noted, the effect of p and IP translation cancel out, so we end up with t, which can be changed by the user. They could have combined t and p a single transformation, but updated since the mouse Manager would have been more delicate, and the intent of the code would be less clear.

• How to use a font that I downloaded in my Flash game?  I downloaded the police in TTF format, but does not know how to configure it.

  I downloaded the file from 1001freefonts.com

  I looked at many tutorials on embedding custom fonts - I'm not sure they reach, they never seem to have a step on import TTF file or whatever it is.

  Thank you!

  Close the flash pro.

  Right-click on the downloaded font > click on install.

  start of flash pro.

  Among the other ways to use this font, you should be able to find it in the properties panel when you select the text tool.

• HTF.font open to set the font size 10

  Hi gurus,
  I use the function open htf.font to set the fonts that I display size 10,
  However, "csize" used in htf.fontopen seems to take input as a pixel.
  
  How can I fix my the font size to 10?
  
  
  function fontOpen (ccolor in varchar2 DEFAULT NULL,
  csurface in varchar2 DEFAULT NULL,
  CSize in varchar2 DEFAULT NULL,
  cattributes in varchar2 DEFAULT NULL) return varchar2;
  
  Thank you

  I've never used the Oracle Supplied PL/SQL packages (such as OWA cellsprint and those of html since HTF/HTP) to generate the HTML.

  I prefer to write my own packages do that instead. Allowing custom settings and behavior, making css supports, using your own default values personalized and so on.

  If you want to replace the FASS. FontOpen() and FASS. FontClose() calls, simply do as follows:

  create or replace procedure CustomFontOpen( ... ) is
  begin
    HTP.prn( '' );
  end;
  

  But I like a little more abstract - so instead of writing specific HTML tags via a custom interface, I write rather a region custom rendering engine. For example made a report (cursor output) via an HTML table, using a model that defines the colors and fonts to use.

  Of course - when you use Apex, it is rarely necessary... but can be done through the dynamic rendering of PL/SQL areas on a page of the Apex.

• How have use ACS supported wireless users and the VPN user?

  I'm new to ACS and configure the following requirement:

  (1) ACS to authenticate users wireless with window AD.

  (2) once connected successfully to the radio, the user must use VPN for remote access with the ASA.

  (3) the end-user will have only 1 common username but different password.

  for example:

  username: password: cisco: cisco wireless.

  username: cisco password: 1234 for VPN.

  ACS support can this, if yes how can we do? Do I need 2 sets of ACS?

  Yes, acs should work properly according to your need.

  ACS, we have a feature called NAP "network access profile" where we can define the condition based on ip source or attributes which allow to say if the request comes from wireless device acs will forward to AD and if the request is of the acs VPN will forward to this diff of database.

  Basically, we need to use two acs database.

  http://www.Cisco.com/en/us/docs/net_mgmt/cisco_secure_access_control_server_for_windows/4.1/user/NAPs.html

  Kind regards

  ~ JG

  Note the useful messages

• How t use a vertical bar character in the menu bar?

  I would like to use a character vertical bar between menu items, but not before or after the menu.

  I dragged a Horizontal Menu on the page. In the drop-down menu, I chose "the right icon: on". Now a square appears after each menu item.

  I reduced the width of the square to a pixel and adjusted the fill of the text of the menu item to vertically Center the tube.

  My question is, how do I get rid of the last pipe character, the one after the last item in the menu?

  I tried to uncheck edit together in the drop; but when I delete the last character, all the pipe characters are deleted.

  Is there a better way to accomplish this simple task?

  Hello

  It seems that the visibility of the icon on the right does not respect "Edit Together: stop.

  But hits do, then maybe you can get your design by setting the stoke weight (top: 0, bottom: 0, left: 0, right: 1) on all menu items, then edit together turn off and reset the kick on the last item in the menu to 0?

  Abhishek

• Qosmio F20-155: how to use BT to share files with the mobile phone

  Hello
  I HAVE TOSHIBA QOSMIO F20-155, BUT I DON'T NO HOW TO USE BLUETOOTH TO SHARE FILES WITH MY CELL PHONE
  PLEASE HELP ME

  Hello

  First a simple question: are you sure that your laptop supports Bluetooth?
  AFAIK the Qosmio F20-155 was delivered without the BT module.

  In addition, if you are not sure if the phone has BT then you can check the bottom of the unit. It should be placed a label BT if the Bluetooth has been installed.

• How to use USB CAN 8473, code for the basic example

  Hi all.

  I use NEITHER USB-8473 CAN transmit and receive data via CAN.

  I have traveled a lot a lot of pages related to this and realized that the API will not work for USB - CAN. Can someone tell me please how to use this USB-8473.

  Maybe an exaple program would help me. (It is not PCI it we USB,)

  Thank you.

  You will need to install NI-CAN, if you don't have already done.  This is the API that you can use with a 8473.  After installing, open Explorer Measurement & Automation and make sure that you can see the 8473 under your devices.

  Here is a sample VI (LabVIEW 2009) that I wrote for another developer to make the CAN communication basic tests.  You enter a package CAN as a series of hexadecimal bytes separated by spaces, and it will send it to you.  It displays every CAN packet it receives in the same format.

• How to use Sync high speed (HSS) with the HVL-F60M on a NEX-6

  I recently bought the HVL-F60M flasgship flash for my NEX-6. I can't see how to exploit the higher with the NEX-6 synchronization speeds. The built-in pop-up flash is limited to 1/160th shuter speed flash sync. The HVL-F60M claims can I synchronize the maximum of 1/4000e camera which is one of the main reasons I bought this flash. I've scoured the menus but can't find this configuration. Can someone point me in the right direction. Thank you.

  Hi, thanks for the response. I since found that HSS is disabled when the flash HVL-F60M has the bounce flash diffuser installed. There is a small magnet on the hood that tell the camera what it is attached. I guess that the indirect light and power are not suitable for high speed motion gel. I can adjust the shutter speed all the way up to 1/4000 in mode S and M. which concerns

  cmosse wrote:
  

  • Make sure THAT HSS is activated on the flash
  • Set the camera to the mode S and select shutter speed<>