How to validate if my hot RMAN backup is good

Similar Questions

• Error in the creation of the database of hot RMAN backup

  Hello
  
  I created the database at the time of the installation of Oracle software. Name AAA
  Now I took hot RMAN backup of database and after the fall of database.
  
  Now I want to restore the database again, but I am facing a problem.
  
  as: if I want to connect RMAN, $rman target / it gives error
  
  Recovery Manager: Release 10.2.0.1.0 - Production on Tue may 24 15:29:17 2011
  
  Copyright (c) 1982, 2005, Oracle. All rights reserved.
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00554: initialization of the package manager internal collection failed
  RMAN-04005: target database error:
  ORA-12560: TNS:protocol adapter error
  
  Please help to get me out of this problem.
  
  
  Regs,
  Brij

  See this topic and say if this can help

  http://forums.Oracle.com/forums/thread.jspa?threadID=2190328&TSTART=90

• EBS cloning using hot RMAN backup

  Hi hussein/helios,
  
  EBS R12.0.6
  Oracle 10g DB
  
  I was cloning EBS using cold backup, which means that I stop the database and copy it.
  Today, as I face a problem of cloning because I am not allowed to stop the database. This is my first time at this meeting.
  I want to clone a PROD EBS customer, but he's working on a service 24 x 7, which means that I can not close easily.
  I have a RMAN backup, full of Sundays and archive newspapers every day.
  Can you give me the metalink notes where I can clone using a hot RMAN backup?
  
  Thank you very much
  
  MsK

  Salvation;

  Now I'm here;

  Let me share my experience with you

  1. copy your ORACLE_HOME from source to the target
  2 give her permission
  3. restore your Db on your target with RMAN
  4. use the ORACLE_HOME which are copied from the source to target
  5. you must activate the automatic configuration on the new database, follow below

  * With the help of automatic configuration to manage system Configurations in Oracle E-Business Suite Release 12 [ID 387859.1] *.
  Section 3: Patch 3.2 AutoConfig. Enabling AutoConfig on a new Oracle home

  Respect of
  HELIOS

• Hot RMAN backup fails every time in R12.

  Hi experts,

  Please suggest me that I have to plan rman backup hot. I have "write" command to perform hot backup. When I take backup hot of 1st time the backup completed successfully. but when I run the same command resume backup for the second day. it is impossible to give space issue I havhot e calendar for daily use rman backup.

  I had to take the backup hot daily and I want backup overwrite the backup file according to the daily backup.

  Please suggest me what I need to make changes in the configuration of rman and the rman command.

  OS - réhèl 5.6

  Database - 11.1

  EBS - r12.3

  configuration of RMAN:

  RMAN > show all.
  
  Database with db_unique_name UAT RMAN configuration parameters are:
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  CONFIGURE BACKUP OPTIMIZATION
  SET UP DEFAULT DISK DEVICE TYPE; # by default
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F" # by default
  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default
  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1;
  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1;
  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' / d06/UAT/rman_hot_backup/Backup_daily%d_DB_%u_%s_%p';
  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default
  CONFIGURE ENCRYPTION OF DATABASE # by default
  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default
  CONFIGURE COMPRESSION ALGORITHM 'BZIP2 '; # by default
  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default
  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / d06/UAT/db/tech_st/11.1.0/dbs/snapcf_UAT.f'; # by default
  
  RMAN >

  
  

  ##############################################################################################################

  
  

  RMAN command that I used to make hot extra strength 0 cumulative backup.

  
  RMAN > run
  {
  allocate channels c1 device type disk format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  allocate channel c2 device type disc format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  allocate channels c3 device type disk format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  allocate channel c4 device type disc format ' / d06/UAT/rman_hot_backup/Daily_backup%d_DB_%u_%s_%p_%c';
  cumulative incremental database backup level 1 more archivelog;
  output channel c1;
  output channel c2.
  output channel c3.
  output channel c4.
  }
  

  If something bad in the configuration of rman and my order please suggest me to take the backup hot every day with success.

  
  

  concerning

  pritesh Rodriguez
  

  Hi Pritesh, thanks for the update. You can mark this thread as answered if your questions have been answered. cordially Karan

• make it work how I want that he the rman backup-shared-disk fix - up

  Network of Oracle greetings!
  (Oracle 10g enterprise edition on windows server 2003 platform)
  
  http://www.DBA-Oracle.com/t_os_error_os5_access_denied.htm
  
  is a link where a fix on the location of the rman backups is suggested. It asks me to change logon oracleservicesid. my database is what runs a Web site. When I change the connection oracleservicesid the Web site is no longer functions.this is not desirable.
  How can I fix it?
  Even on my test server that hosts the databases, change the opening of session oracleservicesid to administrator, disable all connections made to the database on the local network using SQL developer. How to not let that happen?
  
  Help, please
  Thanks in advance
  cordially 946207
  
  Edited by: 946207 July 14, 2012 03:01

  10g is desupported for a long time.
  Your question is you backup to a network drive.
  The solution provided by Donald Burleson is correct.
  Why the site no longer works is not clear that you provide no error message, or whatever.
  Course, a simple solution would be to buy an extra drive to connect directly to the server.
  Your post is poorly understood why you plan to implement that.
  Also, your statement on the test server is far too vague. You did not yet provide no error message.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• How to remove a deleted database RMAN backups?

  Hi people,
  
  1, created a 10g database
  2, rman (with recovery catalog) to create and manage backups
  3, dropped to the database (I forgot to use the drop backup option)
  
  
  Is it possible to purge with rman backups now? Or will I have to manually delete all the files?
  
  Thanks in advance
  
  rogers42

  You can cancel the registration of catalogue database, but you must delete the backups manually. To uregister execute under connection as the owner of the catalog. First get DBID form rc_database view and anticipate that, as an argument to the procedure below:

   exec dbms_rcvcat.unregisterDatabase(db_id => 3888161139);
  

  Kind regards
  Julien

• Hot RMAN backup requires archivelog all the time?

  Hi all

  consider: a dml operation is running in oracle database 11 g. After a while he completed and published a statement commit. Now, I took a full hot backup with rman. but backup of archivelog dint take (its must I know, but I want to know if we can do incomplete recovery using only the full backup and the database open with RESETLOGS option?

  Kindly let me know if we can do incomplete recovery using only full database backup, or we must need archivelog to open the database?

  Kind regards

  Tell your DATABASE BACKUP begins at 01:00 and ends at 01:50. At a minimum, you must save the Archivelogs from 01:00 for the first archivelolg after 01:50.  Technically you don't need the archivelogs in until 01:00. However, if you want to make a point in time recovery (which is a MUST for any production database), you should also save the archivelogs "earlier", which can be used with the last database backup.

  Your commitment does NOT guarantee that the database files are immediately updated - DBWR differs "lazily" writing in database files.  Your commitment is preserved in the online redo log. This should be archived an Archivelog and saved.

  Hemant K Collette

• How to recover a table without rman backup

  Hello
  
  Database version: 10.2.0.4
  Operating system: windows 2003 r2
  
  I lost one table in my database of development, the size is 1 TB. Will have only a manual backup.
  I want to restore the table, not the full base because the size is 1 TB.
  
  We do not use rman and flashback is not enabled.
  
  Thank you and best regards,

  user12133150 wrote:
  Hello

  Table was droped. Recyclebin is disabled in my database.

  Y at - it another option. I have not also export dump.

  Thank you

  No.You must restore your database on server/members and open this database. Take then export this table and finally that import into the production database

• How to ensure the rman backup is successful?

  Hello
  
  We have scheduled backup rman jobs.
  1. but how do ensure us that all rman backups are successful?
  2. If the rman written directly to tape, how to ensure that all tape backup are successful?
  
  Thank you
  
  Andrew

  Not sure why you were not able to download. I sent you a copy.

  Kind regards
  S.K.

• The user managed based backup Rman backup cold cold vs

  Hi all

  I just want to know the advantages and disadvantages for backup managed user cold and cold backup Rman.

  What is the best cold backup?

  Some some can help me?

  Thank you

  Cedric Joshi

  Hello

  Both are good only... If you took the clod backup (managed by the user), you can also do with RMAN catalog.

  I feel clod RMAN backup is good.

  Reason:

  ======

  ++ with RMAN you can avoid used used block, you can only backup used blocks

  ++ RMAN has its own compression algorithm

  ++ We also have the ability to assign multiple channels to parallelize the backup

• EBS R12: How to clone an RMAN backup online?

  Hi hussein.
  
  I saw before in this forum, how to copy a database from an RMAN backup.
  
  The scenario is that I have a PROD on ProdServer instance.
  I want to create a DEV instance clone on the same ProdServer server, by using the RMAN backup.
  I want to clone the database only, this is just to check if my RMAN backup is restorable or legible or complete or etc.
  
  But I can't find the notes. :(
  
  Can you help me research it please?
  
  
  Thank you very much
  
  Ms. K

  Hello

  Documents rapid clone (including the "cloning Oracle Application 11i with rapid Clone /R12 - database (9i/10 g / 11 g) Using Hot Backup on the open database") are in (Note: 799735,1 - Rapid Clone library resources, version 11i and 12).

  Thank you
  Hussein

• Create the new database of complete hot RMAN, atrchivelog and backup control files

  Hi all
  
  I'm trying to create the new database U1234 of P1234 of full hot RMAN, atrchivelog and control P1234 file backup.
  
  Here are my steps
  
  (1) to restore the control file
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restorecontrol.out
  startup nomount pfile=/u01/oradba/admin/U1234/scripts/restore/restore071009U1234/initP1234.ora;
  the value of DBID 6767676;
  run
  {
  allocate channel d1 type disk;
  controfile catering to ' / u02/oradba/U1234/control/P1234_control01.ctl';
  Restore controlfile to ' / orarman/restore/P1234/cf_P1234_c-00';
  change the editing of the database;
  }
  EXPRESSIONS OF FOLKLORE
  
  (2) database stop then restart the database with the new contraol file using pfile.
  
  (3) restore data files
  
  #! / bin/sh
  ORACLE_SID = P1234
  export ORACLE_SID
  RMAN nocatalog target / < < EOF | Tee restore_dbfiles.out
  Run {}
  the value of newname for datafile 1 to ' / u05/oradba/U1234/dbfile/U1234_system01.dbf';
  the value of newname for datafile 2 to ' / u05/oradba/U1234/dbfile/U1234_undotbs01.dbf';
  the value of newname for datafile 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  the value of newname for datafile 4 to ' / u06/oradba/U1234/dbfile/U1234_users_d01.dbf';
  the value of newname for datafile 5 to ' / u06/oradba/U1234/dbfile/U1234_tools_d01.dbf';
  the value of newname for datafile 6 to ' / u08/oradba/U1234/dbfile/U1234_audt_x01.dbf';
  the value of newname for datafile 7 to ' / u07/oradba/U1234/dbfile/U1234_audt_d01.dbf';
  the value of newname for datafile 8 to ' / u07/oradba/U1234/dbfile/U1234_audt_d02.dbf';
  the value of newname for datafile 9 to ' / u08/oradba/U1234/dbfile/U1234_lh_x01.dbf';
  restore the database;
  switch datafile;
  }
  EXPRESSIONS OF FOLKLORE
  
  
  ORA-27063: number of bytes read or written is incorrect
  SVR4 error: 28: no space is available on the device
  
  Now, I missed the space during the restoration of data files and want to restore remaining who is 3 and 4 of datafile datafile.
  
  Can you please let me know how I can restore it.
  
  I need to change the names of database after the successful restoration.
  
  DBVERSION 10.2.0.1
  operating system: solaris 10
  
  Thanks in advance.

  Hello..

  Do you have free space? If Yes, then you can try: -.

  RUN {}
  SET NEWNAME for DATAFILE 3 to ' / u05/oradba/U1234/dbfile/U1234_sysaux01.dbf';
  RESTORE THE 3 DATA FILE;
  DATAFILE 3 SWITCH;
  }

  [http://www.oracle-base.com/articles/9i/DBNEWID.php]

  Anand

• How to create a database in the server-2 based on the game of RMAN backup in server-1

  Hi all

  I need help related to RMAN backup in the following scenario, my server-1 details are given below.

  * Operating system-Windows server 2012 R2 Standard Edition

  * Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  PL/SQL Release 11.2.0.1.0 - Production

  CORE 11.2.0.1.0 Production

  AMT for 64-bit Windows: Version 11.2.0.1.0 - Production

  NLSRTL Version 11.2.0.1.0 - Production,

  I have configured RMAN and level 0 and backup of level 1 with on the external HARD drive.

  all the RMAN backup is located in this drive external HARD only, same archivelog.

  My question is,

  How to create a database to Server-2 based on the RMAN backup I took in server-1.

  It's to help me create a server test and even if the server-1 crash, then I can create a database in the new server-2 with backup I took on the external HARD drive.

  Is it possible to achieve the same or not. Kindly suggest me or share a good Internet link or document and share your knowledge to achieve my need of stimulus.  This will really help me

  It does not matter whether you use ASM. The link above should guide you on how to change the file names of data before restoring if the location of the data file on server 2 will be different from server 1.

  Since you asked for 11g binding, it is here

  http://shivanandarao-Oracle.com/2012/04/28/duplicating-database-without-connecting-to-target-database-or-catalog-database-in-Oracle-11g/

  Kind regards

  Shivananda

• How to restore RMAN backups

  Hello

  I tried to include works of RMAN Oracle 12 c

  If I use the following command, I should have the backuppiece and the archivelog saved in a folder:

  RMAN > BACKUP database DATA PLUS ARCHIVELOG;

  If I ran this command in 4 different days, which I ended up having 4 folders with different inside files

  I guess that, in these files, I have the data files and the archivelogs

  Now I move these folders to tape, re-cutting the backups and delete expired

  Say that in a month, I need one of these backups if I put a band records and I added start with 'c:\path_of _restored_folder _L', so I added all files in the folder that I restored from tape

  Now, if I try to restore the basis of all is well but when I run the recover, it is missing some archiving logs it says

  If I put all the files for 4 days then he finds the archivelog she needs and pick up without problem

  on this basis I understand that in the folder containing a backuppiece of a specific day there is the newspaper of archive that I needed to recover from the DB, is that true? How can I know if the backups folder I need to replace in order to have all the required log archiving?

  At the moment my DB retrieves only if I handed out the Ribbon last backup folder, if I handed out the previous, it restores, but is not recover

  Also I have this configuration of the oracle recovery 3 days window maintains backups in order to be able to restore and recover the last 3 days and he simply deletes all obsolete if the FRA is full

  I tried earlier to set up the window of 3 days as a test recovery

  I ran a few backups and after that I ran the 5th FRA leak out of space and the backup fails

  I expect rman to remove the old backup and make way for a new that I have 5 backuppiece and the FRA is full, why he not do?

  Thank you

  The default behavior of RECOVER is to make a full recovery - right until the transactions today.  So it must all archivelogs.

  If you want to restore and recover to a point in time, use the SET clause to THAT specify a sequence of the newspaper or time or SNA.  Oracle will then not get beyond that point in time - that is to say he will not seek further archiving logs.

  (Ideally, when you restore an old backup, I also begins to restore the old controlfile, then using this controlfile).

  If you use the FRA in this way

  a. set db_recovery_file_dest_size and db_recovery_file_dest

  b. * not * used a FORMAT clause in the BACKUP command

  Oracle will recognize all backups in the FRA (you can check by querying V$ FLASH_RECOVERY_AREA_USAGE before and after the backup).

  In this case, Oracle can and will automatically purge outdated backups - that is to say any backup older than the retention period, provided that there is at least a L0 or backup complete closest to the retention period.  You should see messages to this effect in the alert of the instance database log file.

  Hemant K Collette

• How knowledge/check if the RMAN backup was performed using a current control file or database catalog?

  Hello

  How knowledge/check if the RMAN backup was performed using a current control file or database catalog? I mean RMAN prompt or sqlplus is it possible to know.

  Thank you

  You're welcome my friend

  You can see them using two methods.

  as I mentioned above, you can see them connect to the catalog database and you can query using the view that I sent

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV89601

  the other method is the list command, you must use the list command after connecting using rman "rman target / catalog cat_user/cat_pass@catdbtns" command

  http://docs.Oracle.com/CD/E11882_01/backup.112/e10642/rcmreprt.htm#BRADV8136

  Check the value of the control_file_record_keep_time parameter. The default value is 7 days. in the output of the list command, if you can see the old backups to the value, you must be sure that the backup information comes from the catalogue database

  SELECT * FROM parameter $ v where name = 'control_file_record_keep_time '.

  an example of command list

  the list of completed database before backup ' sysdate-10'.

  Concerning