HP Officejet 6500 Wireless all-in-One Printer - E709n does not print

My HP Officejet 6500 Wireless only all-in-One does not print from my main computer. I can scan from this computer and print them from others. I uninstalled and reinstalled the software and drivers, restarted the queue, run the scan doctor and get error error unknown/deviece.  I have disabled the firewall unplugged abd and repluged the power to the printer.

Any thoughts?

I have messed with my firewall and had it work. Still not sure what I did but it resets something. Thanks for the help.

Tags: HP Printers

Similar Questions

  • HP Officejet 6500 Wireless all-in - One Printer - E709n - locked up

    I searched the Forum but could not find a solution to my problem.

    My printer is locked and does not go in mode 'sleep'.  The power button does not work and is still on.  I'm unable to print, but however I am able to receive faxes.  The only way I can cut off is by unplugging the power cord, but when he doesn't go to the top it gives me a warning about disconnecting that way may damage the printer and to use the power button and it hangs again.

    Help, please.

    Thank you

    •´`•. (*•.¸(`•.¸ ¸.•´)¸.•*).•´`•»
    «•´¨*•.¸¸. ADRIENNE. ¸¸. • * ¨• »
    «•´`•. (¸.•´(¸.•* *•.¸)`•.¸).•´`•»

    Reset the printer by holding the # and 6 keys while turning the power on.

    It sounds dead for me, but it may work.  If it isn't, try # and 9 keys.

  • Black cartridge does not print 6500 wireless all-in-one printer

    He can't get a black cartridge to print even after cleaning the print heads on my of 6500 all-in-one wireless printer.  I tried cleaning the heads of print and sensors twice no longer useful, but can print color.

    jweatherly, unfortunately, it seems that your printhead may be dried or damaged. I would recommend that you replace it if a local retailer or through HP directly.

    However, the print heads can be an expensive part of the printer to replace. On this thread (http://h30434.www3.hp.com/t5/Other-Printing-Questions/HP-6500-Office-jet-E709a-Black-printer-cartridge-HP-920-not/m-p/447545#M28623) Bob describes some steps to clean the printhead in a more direct way. It might be useful to follow the steps, he did and see if it improves your print quality, since he worked for others.

    Let me know if it helps!

  • ePrint @ HP Officejet 4500 Wireless all-in - One Printer - G510n

    For Android, I had to download 2 applications:

    1 HP e printer range
    2 HP Print Service plugin

    With app #1 only, the app does not see my wifi printer. Plugin added #2 helped to solve the problem.

    I tried this on an iPhone and it does not; I can't find "HP plugin Printing Service for iOS."

  • HP Officejet 4500 Wireless all-in-One Printer G510n is always offline

    When I try to print, the Officejet 4500 G510n Wireless is always offline and will not print.

    I clear the buffer of characters and reset the printer by turning it off and back on.

    Then I right click on the printer icon and select printer to use online.

    After that, the printer works normally.

    My question is, why he continue offline?

    I do this procedure whenever I want to print.

    I am running Windows Vista 64-bit and the printer is connected wireless.

    I checked HP updated software downloads.

    The available software is dated January 2010.

    I already use this version.

    Any suggestions will be greatly appreciated.


    Please use the following advice/instructions to correct:


    Kind regards.

  • 6500 wireless all-in - One Print: Info for eprint app the name of the host

    I am trying to print from my iPhone 6 and a time warner email account.
    The eprint application requests a host name and port.
    How can I find this info.
    Thank you very much


    You can find SMTP for Time Warner in the link below:


    Be sure to put the right SMTP server, the 587 port with the information of the user and the password as described.

    I don't see any reference to verify the SSL / TLS option, so I guess it doesn't have to be verified... If you are unable to connect, try to check this option as well.

    Kind regards


  • Error: The computer cannot communicate with the printer; printers HP officejet 4500 wireless all-in-one

    Original title: hp officejet 4500 wireless all-in-one printer / moved, unplugged and replugged and then in the new House when turned on laptop hp, now it will not find printer

    I need help with getting my hp laptop to communicate with my printer hp officejet 4500 wireless all-in-one, I moved and when I unpluggled everything and moved, when I tried to print something now my computer says it can not communicate with my printer, even if in the control panel it shows my printer has been verified as my default printer I don't know what to do?

    What is the version of Windows installed on the computer? For example, Windows 7, Vista, XP

    Please answer the question above so that we can better guide you.

    For now, you can read the following article.

    Printer in Windows problems

    Check if it helps.
  • OfficeJet Pro 8500 Wireless all-in-One Printer - A909g User guides

    Can you send a fax from a PC to an Officejet Pro 8500 Wireless all-in-One printer when connected wireless?

    Hello dhe8011,

    Welcome to the HP Forums!

    I understand that you would like to know if you can send faxes from your computer. Yes, you are able to perform this function, but must be in place. What is your operating system on your computer? Click here to read: Windows.

    Please follow this entire document from HP on the sending of a Fax from your PC (Windows 7 or Windows Vista).

    Let me know if this document solved your problem or not.

    Impatience on your part.

  • Printing DCP color red problem - HP Officejet Pro 8500 Wireless All - in - One Printer, the 4th copy

    I have a HP HP Officejet Pro 8500 Wireless all-in-One Printer and try to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have new HP ink cartridges and print on HP Color Injet paper. I have renectly replaced the Black/Yellow Printhead (at least 6 months ago). At the beginning when I cleaned the printheads, I was able to print 2 or 3 pages showing my color RED. Then back to magenta. When I received the images of test after you have cleaned the print heads, they are all perfect, no lines.

    What happens and how can I solve this problem?

    Hi TM1997,

    Thanks for the reply!

    Given that the printer seems to work for a bit and then comes back to the same question, it must be a problem with the printhead (Cyan/Magenta one) or the ink lines that go from the cartridges to print heads. First of all, I would suggest that you check the warranty date on your printhead C/M. If it is under warranty contact HP Technical Support in your area and inquire about a replacement, but if not, it's you if you want to replace the print head, printer service, or look into an upgrade.

    Have a great weekend!

  • HP Officejet 4635 e-all-in-one printer prints multi-page document

    Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

    My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

    I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

    I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

    I wish I had a solution to this problem.

    Thank you very much.

    Helen Marie Kennedy

    Have you tried full install driver software?  OJ4630_188.exe

    Exit the: 08-04-2014

  • Driver for Officejet 4500 Wireless all-in-one will not install after the upgrade to Windows 8.1

    Upgrade to Windows 8.1 on Pavilion g6.  OfficeJet 4500 Wireless all-in-one still print but not scan.  Downloaded driver full features.  Installation quit giving the error message "file not found".  Tried the 'chat' with no resolution sessions

    Thanks for the reply.  HP has called since then and was finally able to install the driver.

  • How to turn off ringer on my Officejet 4500 Wireless all-in-One

    How can I turn off the ringer on my Officejet 4500 Wireless all-in-one unit?

    My operating system is Windows Vista.

    Hi luxorsecurity,

    Follow the steps below to disable the Speaker Volume

    1. press the setup button (key no. 8)

    2. press the right arrow to the base and then setting OK

    3. press the right arrow to the Speaker Volume, and then select one of the options below

    • Soft
    • Loud
    • Off

  • My HPOfficejet j4680 wireless all-in-one printer error message says its offline

    I have and have used several times my HPOfficejet j4680 wireless all-in-One printer to print. But this past week it will not print. I keep getting error messages that says that it is offline or turned off. But the green power light is on. The blue wireless light is turned on. And the date & time is common and pulled down on the front.

    Yet, I just continues to be my what. Any suggestions? Thx John.

    Hello JohnGeiser,

    Take a look at following print references:

    Open the printer Troubleshooter
    Why can I not print?
    Find and install printer drivers
    Let us know if that helps.
    Best regards
  • Cannot get the HP Solution Center to load for officejet pro L7590 all-in-one printer

    Unable to get the HP Solution Center to load. Have an officejet pro L7590 all-in-one connected wireless (through the router) on my new computer Windows 8 but had to deceive it calling it a direct connection.

    I have a new computer with Windows 8.  I managed to get my HP officejet pro all-in-one L7590 printer connected and working with software downloaded from HP.  During installation it placed an icon on my desktop (the old format disktop I love) to the center of HP solutions, but when I try to open the Solution Center a message indicates that the installation is not complete.  When I try to install more software it brings back me to the orginal installation and indicates that the device is already installed.

    I want to clarify again once my choice of installation was directly connected even if it is wireless via a router.  It was the only way I could make it work.

    The Network Configuration page was just that you will find the IP address, but you have this.  It is not as important now.  Now that I've shown you a method to help you analyze let us begin the process is not easy to get the Solution Center works again.

    I was very happy to find an official document on your computer Windows 8 and the solution Center.  I think this should help you when you select your operating system on this page.  It is titled "The scanning device estintrouvable and other related errors" and will be a little better explain what you need to try to get the Solution Center to work once again, I am.

    Let me know if you have any questions concerning one of the steps here and I will do my best to answer those as quickly as possible. I do not know a few things to do if it does not, but it is certainly the best advice to try first.

  • HP wireless all in one printer C410 can get a connection

    I have a HP C410 e-All-In-One printer/fax/copier that is wireless. It was working fine with my computer until someone changed my internet security settings, and now I can't connect. How can I re - adjust the internet printer or the computer setting so that it is compatible again? My printer just wirelss button continues to Flash, as it cannot connect. When I go in the menu on the printer Wireless Setup, I can say that the printer sees my internet, it cannot simply connect. Help, please!

    The easiest way is to uninstall, and then reinstall the printer. If this does not work, then you should ask experts network for advice: social.answers.microsoft.com/Forums/en-US/w7network /son

Maybe you are looking for