I have an Acer Aspire R7 - 571 questions.

Similar Questions

• Acer Aspire V3-571, a continuous beep on startup

  Hello

  I have an acer aspire v3 - 571 that keep a beep on startup. I can get into Windows 7 by pressing "ESC".

  However, after I enter Windows and use my browser (mozilla firefox), the Web page is scrolled automatically at the end of the page. Despite manually by pressing the scroll bar and bring the scroll bar to the top of the page, just wedpage keep automatic scrolling at the end of the page.

  Initially, I suspect my wireless mouse was defective, but even after changing for wired operation smile, the problem persists.

  Now I am suspecting if the problem is the built-in trackpad or the built-in keyboard key 'END '. Please en; ighten me on what I need to do to solve the problem above.

  If it is a sound signal and go to page END...

  There are many more to check, take a look at your 'End' button, use a cloth with compressed air to clean up a bit.

• Scalability of memory Acer Aspire V3 - 571 G - 9686

  Hello

  There are about 1 1/2 year, I bought an Acer Aspire V3 - 571 G-9686. It came with 6 GB of RAM setup in this way:

  SPD EEPROM (DIMM0) information

  Manufacturer: ston

  Part No.: 56X64D3S13C9G

  Serial number: 146718E64C0018E4

  Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

  Format: IMM (67.6 x 15)

  Size: 2048 MB (ranks 1, 8 banks)

  Buffered module: No.

  Registered module: No.

  Module SLi Ready (EPP): No.

  Module XMP: No.

  Module XMP 2.0: No.

  Width: 64 - bit

  Ability of Error Correction (ECC): unspecified

  Prefetch buffer: 8 bits

  Manufacturing: Week 10, 2012

  Temperature probe: no

  Heat spreader: Yes

  Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

  Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

  TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

  -------------------------

  Information SPD EEPROM (DIMM1)

  Manufacturer: your technology

  Part No.: I1C1674EV

  Serial number: 000018E64C0018E4

  Type:-SDRAM 10700 (667 MHz) - [DDR3-1333]

  Format: IMM (67.6 x 15)

  Size: 4096 MB (2 ranks, 8 banks)

  Buffered module: No.

  Registered module: No.

  Module SLi Ready (EPP): No.

  Module XMP: No.

  Module XMP 2.0: No.

  Width: 64 - bit

  Ability of Error Correction (ECC): unspecified

  Prefetch buffer: 8 bits

  Manufacturing: Week 23 of 2012

  Temperature probe: no

  Heat spreader: Yes

  Supported frequencies: 381 MHz, 457 MHz, 533 MHz, 610 MHz, 686 MHz

  Latency (tCL) CASE: 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS to CAs (tRCD): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  RAS Precharge (tRP): 5 381-MHz clocks, 6 clocks @ 457 MHz, 7 clocks @ 533 MHz, 8 clocks @ 610 MHz, 9 clocks @ 686 MHz

  Cycle time (TRAS): 14 381-MHz clocks, 17 clocks @ 457 MHz, 20 clocks @ 533 MHz, 22 clocks @ 610 MHz, 25 clocks @ 686 MHz

  TRC minutes: 19 clocks to 381 MHz, 23 clocks @ 457 MHz, 27 clocks @ 533 MHz, 30 clocks @ 610 MHz, 34 clocks @ 686 MHz

  ------------------

  So, it's a 2 GB module and one 4 GB. Different manufacture.

  My question is:

  What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB?

  Thanks in advance for any help.

  Kind regards.

  Hello

  You wrote:

  "What are the maximum size (GB) and speed (MHZ) that supports this laptop? And should I upgrade with two modules of the same size, or can I have 1 module with the maximum allowed size? For example, 2x4gb or 1x8GB? »

  In fact, you have 2 sticks of memory 667 MHz. In dual channel, it means to 1333 MHz.

  Specifications of aspire V3 - 571 G-9686:

  Chipset: Mobile Intel HM77 Express.

  Processor: Intel Core i7-3632QM

  Integrated graphics card: NVIDIA GeForce GT 640M - 2 GB RAM DDR3

  You can upgrade up to 8 GB (2x4gb) and Max frequency 1600 MHz. For example: If you install a single stick of 4 GB - 1600 MHz, it is single-channel: 1600/2 = 800 MHz.

• ACER Aspire E1-571 initialize problem.

  Hi everyone, I recently bought a new hard drive for my acer Aspire E1-571 gor because the old one (500 GB hitachi) "crushed". Then I did today, it's a WD scorpio blue 2.5 "320 GB. I have installed the new drive, run an installation of windows 7 x 64 ultimate edition of windows install I divided on 2 partitions, formatted and installed the system disk. Installation is completely normal and fast but the laptop keep coming at startup screen ACER logo then restarts after the instalator finished and did the final restart before you run the Windows for the first time and again and again and again to infinity so I reinstall windows once more and it's the same thing. After that, I got the new drive from the laptop and put it in another laptop of mine an Asus and windows proceeded to the desktop without any problem. So my question is what is the case, do I need a disk for acer hitachi because no other brand will not work with it or what? or maybe its a sort of Matherboard problem with the disk?
  Thanks for the help!

  Hmm, how about uefi? After a few readings in a thread, it seems that bios is one of messing around.

  see this link; http://community.Acer.com/T5/notebooks-netbooks/Windows-7-UEFI-install-on-aspire-E1-571/TD-p/50201

  or perhaps this, simple and could be much more useful, http://community.acer.com/t5/Notebooks-Netbooks/Installing-Windows-7-on-acer-aspire-E1-571G/td-p/930...

  some posts here might be useful (as I browse some of them, some say install win7 on GPT with active uefi)

• How to activate Bluetooth for Acer aspire E1 - 571.

  Original title: Bluetooth for acer aspire E1 - 571

  I recently got a new computer and am wondering how to activate Bluetooth. It is an Acer Aspire E1 - 571 equipped with windows 8 whenever I go settings > change PC settings > wireless, Bluetooth button doesn't click or drag. If there is a way for me to turn it on can you let me know? And also, if there is a shortcut to turn Bluetooth on and off could you let me know about it too please, thanks.

  Hello

  Acer Aspire E1-571 seems to have integrated Bluetooth connectivity. You can press Fn + F3 to activate the Bluetooth on the computer.

  You can also check with the Support of Acer and see if the keys are located to activate Bluetooth.

  We can also refer to the articles and check if it helps to activate Bluetooth.

  Add, remove, and manage your devices and printers

  Why Windows is not find my wireless device?

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and updates of firmware for the computer.

  Windows Update: frequently asked Questions

  You can also visit the Acer support website to install the latest version of the Bluetooth drivers and check.

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  I formatted my computer to windows xp, I have an acer aspire m5100 is the message I get [error number: 0x8024400A] the website has encountered a problem and cannot display the page you are trying

  Sasha,

  What browser (exact version). ?

  Harold Horne MVP on September 24, 2012

  0x8024400a

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. on start and then click Run.

  2 copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281>

  You may be unable to access the Windows Update of Windows XP Web site.

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack

  http://support.Microsoft.com/kb/322389>

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28>

  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure

  http://support.Microsoft.com/kb/875364>

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717>

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center.

  This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely.

  The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

  FIRST: Uninstall IE8 and IE7 if they are installed. Back to all the way back to IE6. You want other patches before you get those. Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

      
  

  UTC/GMT is 14:12 on Sunday, October 28, 2012

• Acer Aspire R7-571 and Pen support?

  Hello, I recently bought an Acer Aspire R7-571 and I wonder if it supports any kind of pen or stylus for the touch screen? I ask this because if that's the case I intend to buy one, but if it isn't... Well, I don't want to waste money and prefer not to buy one only to find out that it doesn't work.

  Also what leads me to believe that it may in fact take supported a pen/stylus, is to do for the parameters in under hardware and sound control panel, where it says Pen and Touch. So yes maybe a stupid question, but I figure it does not hurt to ask.

  Thank you for your time

  You can use the same pens and stylii with your Acer R7-571 as with most Android devices or iPhone/iPad: capacitive standard pens. I use with my R7-571. In General, how to identify the price will be: they should all be less than $20! (In fact, $ 2 mine!)

  R7-572 has an active digitizer under the screen, and so should be an active stylus/pen for her. They start usually from $30.

  More information here. But not much more!

• I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 arrives

  I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 comes up... all clues?

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. you try to add a network printer?

  3. What is the full and exact error message?

  4. when exactly you get the error message?

  5. What is the number of brand and model of the printer you are trying to connect?

  Method 1:

  I suggest you check out the link and try sharing the printer:

  Share a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/share-a-printer

  See also:

  Network printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Method 2:

  Check out the links and check if that helps:

  File and printer sharing: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions

  Troubleshoot file and printer sharing

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

• Installation for Officejet 4500 disk crashed in Acer Aspire E1-571

  I have a laptop Acer Aspire E1-571 with Windows 7 64 bit and has recently purchased the officejet 4500. I used the disc that came with the printer to install the software and during this process, an error box emerged which didn't say anything other than "error". Then I was asked to restart my computer and do, my computer could not restart and had to start itself in system repair mode to correct everything that had happened. It works fine now, but I don't know if I should try to install the drivers from the HP website or not, because I would not let this happen again.

  I did not at all connected USB and configuration was going well until the error message occurred.

  Hi Lulzpup,

  Download and run the installation using the software on the link below. Let me know what you find?

  Driver and HP Officejet Full Feature software

• Acer Aspire E1-571: current password for boot Acer bios menu

  Hello

  I'm using a computer laptop acer aspire E1 - 571 and I want to enter the boot menu by pressing F2, so he asks the current password that I don't know. Help, please

  Hello

  This is the HP forum, you may need this repost on the Forum Acer or communicate with their help, however, if you enter an incorrect password 3 times, you receive a stop code?  If you do, post back with the code.

  Kind regards

  DP - K

• Hi there I have an acer aspire one and I have a problem with my wireless connection.

  Hi there I have an acer aspire one and I have problems with my wireless connection.it is connected, but I can't use internet.any thoughts? Thank you

  A look at the "front" face, under the lip of the keyboard, similar to where a lock would be on a laptop. There is here a cursor that is not a lock, but it is a switch that activates / deactivates him wireless on and outside. Slide it on until it turns on the light above it (with the logo of the antenna), indicating wireless is turned on and drag it again to turn it off.

• I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  I have the acer aspire e1 - 510 with linux, how to remove linux and install windows?

  You can buy or download a copy retail Microsoft windows and install it on your computer.

  You can download and install the device driver windows for your computer to Acer support website.

• Acer aspire V5 571 P - stop with power cable removed

  Acer aspire V5 571 P - when cell phone fully charged and power cable removed from the laptop shuts... Help?  Thank you.

  Looks like there may be a problem with the internal battery. Battery reset press and hold the button for 4 seconds. Then, charge the battery and see if it works when unplug you the unit. If it is not the case, contact technical support to set up the repair.

• Acer Aspire E1-571 dedicated graphics card

  Hiya anyone know if taking the Acer Aspire E1-571 who joined the graphic HD4000, a dedicated graphics card?  Thanks in advance

  Hello

  This model does not come with dedicated VGA (Nvidia or ATI), there only inbuild Intel HD graphics. If any model acer contain end letter 'G' the name of the model (Eg: E1-572G)  he dedicated VGA.

  Thank you

• I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

  I have an acer aspire 5251-1513... Anyone know where in the BIOS I can remap memory?

  See if this helps:http://www.sevenforums.com/tutorials/66482-memory-set-maximum-amount-used-windows.html