I've updated a few existing Images on assets > library > Image, but he doesn't think, where it has been used?

Similar Questions

• I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some

  I just wanted to know at all, if you encounter a problem with the update of creative cloud as if I was (error 1001), I discovered that my Webroot AntiVirus has been the origin of the problem. I turned it off and it updated correctly. Hope that helps some people I've seen so angry about it here by searching for the answer myself.

  Thanks for sharing this, yes turning Firewall works.

  Concerning

  Stéphane

• My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but every time I open a fil

  My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?

  Hello

  Acrobat 7 is not supported and an older version of Acrobat.

  Also, it is not compatible with Windows 7.

  This could be the reason why you are faced with it.

  Please see this link.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Concerning

  Sukrit diallo

• algorithm that does the image function has been used

  Salvation or

  I implement a picture how to remove the small object.

  and analysis of particaler to find the area and perimeter of the object in binary image

  can a pelase tell me what algorthem that have been used by labview to find two long thease or value?

  Best regards

  Looks like you want to use the filter particles and analysis of the particles the steps in the wizard of Vision. Vision Assistant is part of the Vision Development Module (VDM). The steps I listed are found in processing functions: binary Vision Assistant section. The particle filter can remove small particles which are not of interest. The analysis of the particle can give you counts and measures of interest. There are other steps in the same section, which can also be useful for your application.

• Bring back to the world of today.  I can't update unavailable because 'Update.' opening for this Apple ID  I know my current Apple ID and this iMac was bought with that and I thought opening no way of knowing what ID has been used?

  I have an iMac with an opening.  I get the error "update not available with this Apple ID".  I remember that I had a different ID years ago.  I can not find via my current emails.  In any case to find the ID who purchased this application?

  https://www.Apple.com/Asia/support/Mac/app-store/contact/

• Have a licensed adobe stock image, but it appears as empty when I try to use it

  I have a stock image #53001099 (image paisley) license and try to use it in Photoshop CC.   He appears as expected in my library, but when I try to place it on a document only a preview is displayed.

  

  I'm doing something wrong here?   I'm on the latest version of Photoshop CC 2015.1.2 (201601113.r 355 x 64)  The image without license came fine.

  The problem is that you try to open an Illustrator file in Photoshop. They are Illustrator files .ai files. You must open in Illustrator and resize and export to something compatible with your needs.

  To avoid this, if you have not Illustrator is to uncheck "Drivers" of the Stock research tool.

• I want to update Firefox, but it doesn't support a Screengrab, which I use on a daily basis, someone at - it a solution for this?

  I want to switch to Firefox 7.0 but I get the message, whenever it is suggested, that it will not support the add-on: Screengrab. I use screengrab almost every day and won't give it up. Can anyone tell me a way to make screengrab works with Firefox 7.0?
  THX, Shelly

  I can not install any screen capture on Firefox 9

• My computer has been updated and deleted firefox. Can I recover my favorites?

  I updated my computer to the original terms, but documents etc. were kept. Firefox has been removed. I reinstalled it in beta. Can I recover my favorites thanks to sync? If I try to connect to synchronize I just get a blank page. I am running windows 8.1 on a Sony vaio SVF15n2b4e.

  So I double-cliquiez this one first to display the contents of the folder. There should be a few files of dozens of parameters, and a subfolder named BookmarkBackups.

  You will find many files including the date and the number of bookmarks that are incorporated in the name of the file in the subfolder BookmarkBackups. I suggest you copy these to a more convenient location, such as your Documents folder.

  Then, from Firefox, use the restore function. Note that this will replace any bookmarks you have added since you have reinstalled this new Firefox. If those who criticize, you can do the steps 'optional '.

  (1) optional - export all new bookmarks you added. See: Firefox bookmarks export to a HTML file for backup or transfer bookmarks.

  (2) restoration of the backup that you copied into your Documents folder (in the recovery menu, at the bottom, choose a file): restoration of the bookmarks from a backup or move them to another computer

  (3) If you have created an HTML file in step 1, re - import only: import bookmarks to an HTML file.

  (4) If you have imported a file in step 3, you can move the Bookmarks imported to the desired location using the dialog library (Ctrl + Shift + b).

  A little luck?

• Photoshop updated to 13.0.3 on retina Macbook Pro but without interface retina

  PS dear community,

  I installed CS6 Design Standard (perpetual license) on my retina 15 inch Macbook Pro (OS X 10.8.2) today.

  • A run a few updates after installation, but no retina, set up-to-date for AI or PS among them.
  • After a quick google search, I read that I had to manually update the Application Manager. Doing just that.
  • Research update of the AI / AI PS. is now v. 16.0.3 and retina, PS is now v. 13.0.3 but NOT the retina.
  • Later, I downloaded the 13.0.3 patch, but this has not changed anything.
  • I uninstalled PS (+ preferences removed) with the Adobe uninstaller.
  • Reinstalled and ran al updates, Application Manager finds 13.0.3 mise put at new day, running the update and it is not yet retina.

  It blows my mind how many markets, google searches, updates, patches that it takes to update Arend & PS "correctly" and apparently it still does not for PS

  Any advice?

  --

  Arthur

  FINAL UPDATE

  ---

  Went through all these steps, but nothing worked. The only solution has been created a new own account on my computer and manually copy everything that I needed.

• I just downloaded the latest Windows updates, now online videos don't work on Firefox but on other browsers, does anyone else have this problem?

  After that download the latest version of Windows Update, I found that I could not play videos on YouTube or other sites. Switching to other browsers I found that I could play these same videos now without any problems. So I did a system restore to determine if updates of Windows had hit video play using Firefox. The restore point has been updated with the day before the download of Windows has occurred. After System Restore has been completed I could now play videos using the Firefox browser.

  To ensure that Windows Update has been the problem, I downloaded again the most recent Windows updates and once more could not play videos on any site using Firefox. System Restore has been used to put my computer on the eve again and once more the OE videos would play in the Firefox browser.

  In fact, your answer took me in a different direction and I found this on the Adobe site:

  The extension of RealPlayer for Firefox, the download and registration, has problems of compatibility with Flash Player 11.3. If RealPlayer is installed Flash Player content does not appear. YouTube provides an error message when you try to view a video.

  To work around the problem, do the following:

     Start RealPlayer.
  

     Click the RealPlayer icon in the upper-left corner and select Preferences.
  

     Select Download & Recording in the left menu and deselect Enable Web Download & Recording for These Installed Browsers option.
  

     Click OK and restart Mozilla Firefox.
  

  Once I did this I could replay now videos in Firefox.

• try to install the update to program and get this message: this program has been blocked. Your administrator set the strategy of blocking this program.

  I got limewire 5.2 installed and tried to install the 5.5 update, but keep the same message: this program has been blocked. Your administrator set the strategy of blocking this program. LimeWireWin.exe unapproved Publisher"I really want this program on my computer, I tried right click on the file to"run as administrator."I also tried to go to control panel, click Administrative Tools (had to change to Classic view to find), but could not find the local security settings.

  'Local security settings' are a reference to group policy, group policy is not included in the 'Home' of the editions of Windows.

  Is there a Parental control on your machine?  'Parental control' is a section of help and Support, accessed via the Start Menu / Help and Support.

  Following on the publishing server warnings type "Publisher" in the same program help and Support.

  Have you tried to clean your Temp folder, you can do this by typing folder in the Start Menu RUN box.  This will open your Temp folder, there, you can remove all Windows will allow you to do.

  It may be necessary to show both hidden and system files and also uncheck 'Hide known file types' in Control Panel / folder Options / view to navigate to the mentioned location of Temp.

  "Policies" could be mentioned around this area of the registry.

  HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Policies
  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies

  To restore default security settings, follow the instructions of Vista in the present.

  Any security software interfere with your installation?

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  How to restore the security settings the default settings?
  http://support.Microsoft.com/kb/313222/#appliesTo

  Have you tried to create another user to test with?

  Sometimes when you right-click on a file to access the properties in a box to unlock to be seen at the bottom of the properties.

• Since the update a few days ago lost sites often visited on my google search page?

  I used Google for a search engine. Before the update a few days ago, when I opened a new tab, it would give me a Google search page that shows in the lower part of 6 to 9 (forget) boxes inside which were minis first pages of my sites visited most often, so I just had to click on one of the boxes to reach the site I needed immediately.

  Since the upgrade, these boxes have been reduced to 3. If you try to move one of the cover on one of the 3 mini page, you can see that others are attached to the breast but it is impossible to click and go. All sites that were saved, seem to be there, and in each of the 3 boxes but are not accessible.

  Is anyway to recover these boxes separately?

  Thank you

  Nancy Smith

  Firefox automatically adjusts the number of columns that match on the subject: newtab page if you adjust the width of the Firefox window or zoom the page in or out and no longer resizes thumbnails.
  The current version is not resize the image, but instead reduced the number of tiles to fit the current width of the screen, so you can't see the number of columns specified via the browser.newtabpage.columns preference.
  Zoom the subject: newtab page to see more tiles (Ctrl and -).

  Toggle the browser.newtab.preload pref on the about: config page in case of problems with zoom the subject: newtab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  See also:

  • New tab tools: https://addons.mozilla.org/firefox/addon/new-tab-tools/

• No update of the poster image edge

  Hello

  I updated a few assets in my dashboard animation and regenerated the file in Muse.  The image of the poster is now out of date and showing colors lot of Muse.  If I delete the image of the poster in the finder (I'm on a Mac), Edge throws an error and will not publish the file.

  Any ideas how to get on board to update the image of the poster itself?

  Thank you!

  Simply create a new image of the poster in the properties/video, the camera icon.

• Update of an existing application of DPS via simple edition

  Well, so I already have a live application on the app store that I published a few months using the DPS simple editing platform.

  I would now like to update/upgrade this application on the apple store with a new folio.

  Recently, I've upgraded to a new iMac and made sure to copy all documents on my hard drive which included all certificates, so that I can use them again for an update.

  I found a good tutorial Digital Publishing Suite help | Folios of publication for the Distribution Service to update my application but have you encountered a problem.

  The problem I am facing now, is that when I connect to the DPS App Builder platform and try and change the current application, I get this error message...

  

  It if you don't see the error message clearly says...

  Missing Folio

  The folio included in this application is missing. The app was

  initially created on another computer, the folio file has been

  moved or App Builder application storage has been removed

  I don't understand what that means in fact that I copied all the files from my old computer with respect to the first app on my other...

  

  Can someone help me out here please. How can I solve this problem?

  Thank you

  Myles

  You cannot change the existing application on a different machine than appeared on. You will need to go to the Folio Builder Panel in InDesign, select your folio and App create in the drop-down menu to create a new app use all the same settings that your old and you can download it on iTunes to replace your existing application.

  Neil

• System restored automatically after the installation of updates & a few missing desktop icons.

  Original title: same set of updates on both computers due to different problems, one problem being a system restore.

  I have two Windows 7 computers in my house.  They all have two problems after installing updates a month ago.  The problem for 'Computer 1' is a bigger problem than the problem of the "Computer 2".  2 computer problem not really seems to be a problem now, but I'll give you the information for comparison purposes. Sorry for the length of this post - I am trying to be thorough.

  1 COMPUTER DETAILS:

  News of the computer: Dell Studio 1745 laptop computer running Windows 7 Home Premium 64 bit, six months at the time of the problem, now age of seven months. It came with Norton pre-installed, never used and uninstalled.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Background: set up with a single account (Administrator, of course) and after a few days of putting in place computer, said ale user account for everyday use.  Computer is configured to warn me before downloading/installation of updates of Windows, with permission for each type of account to install Windows updates.

  While in the standard account, I welcomed these download/install updates and was prompted to restart the computer.  I was done with the computer, so I just closed instead of restart.  According to "Your update history Review", it's updates and they were all successful:

  Update for Windows 7 for x 64-based systems (KB980846)
  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)
  Update for Windows 7 for x 64-based systems (KB982519)
  Update Microsoft .NET Framework 3.5 SP1 for Windows 7 and Windows Server 2008 R2 for x 64 systems (KB982526)
  Cumulative update for Media Center for Windows 7 x 64-based Systems (KB981078)

  After you turn on computer back, everything seemed normal.  I opened Firefox and I got a notice that Firefox has an update is available, a standard user cannot.  Unlike some programs, there is no popup to sign as an administrator, so I went to start > switch user and signed as an administrator.  (There was no update of Firefox at this point - just a switch single user.) That's where the problem appeared: instead of normally load the admin Office, I had to wait while Windows configured my desk (it's new)... wait... wait... wait... wait... BAM!  Your computer has been successfully restored * insert date here * (I don't remember what it was - January of this year, perhaps - because I was so incredulous that it happened and I continued to watch the game "successfully restored").  I do not have the computer to eat, and it don't has not asked me if I wanted to restore it.  He just did, just on its own initiative, when I went on the admin account.  A bunch of shortcut icons are missing from the Office of the admin acct and the ACCT. standard, and wallpaper to the admin account has been changed.  I am not absolutely sure if nothing else was touched.

  I have searched online to try to understand why it happened, and I remember well from my only find, is that if I went to the restoration of the system, there will be an option to cancel it, but I don't see such an option. So I told the computer to eat on a few days to a week before that updates.  It doesn't seem to help.  Shortcut icons are still missing.  Looked at the update history and it shows the five latest updates as being installed successfully, but Windows Update tells me that I need to these five updates AND this time, the little check marks are only already there on four of the five updates listed.  (The first time, the little checkmarks were already there for all five.)  This is the update that is NOT now pre-checked:

  Microsoft .NET Framework 4 Client Profile for Windows 7 x 64-based Systems (KB982670)

  Do not reinstall the five updates.  I don't know if I should jump install them again, or if I should install only the
  now, four are already "pre-checked."  I'm very hesitant to install KB982670, because this update seems to be the likely cause of the problem given the fact that it is already pré-coché in the Windows and the following information updates for computer 2.

  Since I installed the latest updates for 1 computer with no apparent problems:

  X 64-July Windows malicious software removal tool (KB890830) 2010
  Update security for Windows 7 for x 64-based systems (KB2032276)

  NEWS ON COMPUTER 2:

  The computer news: Systemax desktop running Windows 7 Professional 64-bit, a month at the time of the problem, now age of two months.  It has not come with any pre-installed antivirus.  Trend Micro Internet Security installed at the beginning of the use of the computer.  Analyses Micro trend came clean.

  Reminder: Set up immediately with an admin account and a standard account for everyday use.  Computer has been set to automatically download and install updates for Windows, but is about to inform me first.

  At the time of the problem above with the laptop, desktop computer has been enabled.  As all loading,.
  an error message came that there was some kind of issue with the .NET framework.  At another person asked if he knew what was up with that, and it didn't.  Did not note the specific message, thinking he would tell me again if there was a real problem.  I thought it could have been some kind of Windows hiccups when starting the computer, not even knowing about update problems.  I have yet to see this message.  After the number of laptop (computer 1), I took a peek at the desktop computer (computer 2) to check that Windows Update and I saw that an update is available, which is the referenced above same update that the notebook had already the check mark in its box (KB982670), which gives me the choice to check the little to install it.  Very curious, since, as already mentioned, the computer has been configured to automatically download and install Windows updates.  Looked at the update history, and it has already downloaded and installed the other four updates that the laptop has been.  Changed the automatic Windows Update setting to warn me before you download and install updates.  I have not installed the missing update.  Said the only other person in the House who would probably bother install updates to not install it.

  A month later, 2 computer has a notification from Windows update that 21 or 22 updates are available (as a result, by clicking on the icon of the trial of Microsoft Office).  The update not installed a month ago is no longer on the list, and update history shows as having been installed a few days before, apparently because someone else in the House must have thought it looked like a good idea.  I installed all the 'important' updates and have not seen any more problems with computer 2.

  BACK TO THE COMPUTER 1:

  Yes, is there anyone with ideas on how to get 1 computer back to its state before the 5 updates listed above, and what to do about to reinstall some or all of them, I hope, without more problems, for example a random food system does not happen?  I have a feeling I will say that the random system restoration do not occur, but he did.

  Thanks for any help.

  No, I don't use the Norton removal tool.

  IN RE COMPUTER 1 ONLY:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 for good measure, reset Windows Update by...

  How to reset the Windows Update components?
  -Online skip the section to APPLY to; KB971058 access via I8 32-bit only; Run the difficulty in DEFAULT and modes, then AGGRESSIVE [1]
  http://support.Microsoft.com/kb/971058

  5. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will delete your update history (but not list updates in the updates installed)

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft