I want to save one of the other themes

Similar Questions

• This device cannot find enough free resources that it can use. If you want to use this device, you will need to disable one of the other devices on this system (Code 12)

  Guys, I have a problem. So, my laptop has 2 graphics cards, an integrated course of the Intel HD graphics (which works perfectly) and the other being the dedicated Nvidia graphics (Nvidia GeForce 940 m). Until 2 days ago, everything was going well and running.

  I have the application experience GeForce and it prompted me that there is a new driver update should I download. He started to install then after rebooting to complete the installation, it failed. I checked my device manager and saw a yellow exclamation under under my Nvidia graphics card (remember, my laptop has two graphics cards: Nvidia graphics card and Intel HD graphics that works correctly). I immediately checked the details, and he said:

  "This device cannot find enough free resources that it can use. (Code 12) »

  "If you want to use this device, you will need to disable one of the other devices on this system."

  This seemed very strange, because it was LITERALLY working properly before I was invited about update driver I got, so I don't know what to do - as a matter of fact, literally, I finished this game, Deadpool, with my Nvidia card that I put as the default graphics card, a few hours before , so I don't know why this happened. Any help? I'm looking for a logical answer to this, guys!

  Additional information:

  A few days before this happened, I went to my store local pc and installed an extra 4 gigs of ram on my 4 existing to make 8. Don't know if it's useful, but anyway

  If I pick up my laptop and shake it side by side, I hear a slight rattling noise, and it seems a little loose (I found this out after seeing the error message). The noise seems to come from just below the middle of my keyboard (I'm using a laptop). If for some reason, my Nvidia card is loose? Is this possible?

  I am quite technologically inclined, but not to the extent of removing components and reconstruction cell phones / pc and access the bios and what not. I can only remove/add ram.

  I want to know if its something I am able to fix it because I do not necessarily want to go running and sending my laptop places - only my pc up shop.

  Here is the location of my Nvidia card: PCI Slot 4 (PCI bus 4, device 0, function 0)

  My specs:

  Acer TravelMate p257-MG

  Windows 7 business

  Intel core i5-5200u 2.20 GHz 2.20 Ghz processor

  8.00 GB of ram

  64-bit operating system

  1 t hard drive

  940 m Intel HD graphics 5500 & Nvidia Geforce card

  Just to recap, I get the error on my Nvidia graphics card code, "this device cannot find enough free resources that it can use. (Code 12) ""If you want to use this device, you will need to disable one of the other devices on this system. »

  Thanks in advance!

  Hello

  Thank you for your response.

  I appreciate your time.

  I suggest you run ' Intel Chipset Software Installation Utility ' and check.
  Reference:
  http://www.Intel.com/content/www/us/en/support/software/Chipset-Software/Intel-chipset-software-installation-utility.html

  Please keep us updated.

  Thank you

• How can I transfer? two computers running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other.

  my mother has two computers that are running windows 7 and she wants to give me one of them, but it first wants to transfer or share all his stuff from one to the other. We network cables and such can I connect the on computers and share information from one to the other?

  Hello

  To connect two computers with a cable, not a router, it must be a crossover cable.
  These are special cables, but they are not expensive.

  (You can configure a network or a host group (see below))

  Connect two computers using a crossover cable (XP - Windows 7 may be the same)
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-two-computers-using-a-crossover-cable

  It is a description however computer stores will sell them at low cost.
  http://en.Wikipedia.org/wiki/Ethernet_crossover_cable

  Amazon - example of a crossover cable
  http://www.Amazon.com/Belkin-components-CAT5e-crossover-cable/DP/B000067RFT

  --------------------------

  You can also use Easy Transfer

  Transferring files and settings: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/transferring-files-and-settings-frequently-asked-questions

  How Windows Easy Transfer makes setting up a computer easier?
  http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier

  Windows 7 Easy Transfer
  http://Windows.Microsoft.com/en-AU/Windows7/products/features/Windows-easy-transfer

  How to get an easy transfer cable
  http://Windows.Microsoft.com/is-is/Windows7/how-to-get-an-easy-transfer-cable

  ------------------------

  These should help:

  Create a homegroup
  http://Windows.Microsoft.com/en-us/Windows7/create-a-HomeGroup

  Homegroup from start to finish
  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  Access to files and printers on other homegroup computers
  http://Windows.Microsoft.com/en-us/Windows7/access-files-and-printers-on-other-HomeGroup-computers

  File sharing essentials
  http://Windows.Microsoft.com/en-us/Windows7/file-sharing-essentials

  Share files with anyone
  http://Windows.Microsoft.com/en-us/Windows7/share-files-with-someone

  =========================================

  More help at these locations: (Vista references also apply to Windows 7)

  Vista - LAN
  http://www.onecomputerguy.com/Networking/vista_network.htm

  Vista network and sharing Center
  http://www.onecomputerguy.com/Networking/vista_network_sharing_center.htm

  Setting up a network home
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  Home network, wireless network and computer networking Made Easy
  http://www.home-network-help.com/

  Windows Vista tip: How to install and connect to a wireless network
  http://www.watchingthenet.com/Windows-Vista-tip-how-to-Setup-and-connect-to-a-wireless-network.html

  Networking tutorial home
  http://www.tehnomagazin.com/computer/home-networking-tutorial.htm
  Practically networked - everything you could possibly want to know.
  http://www.practicallynetworked.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• A video on any website is presented in double, one on the other!

  Every time I want to see a video, any site, it is case, the screen, the video is on, shows two images from the video. Basically, the video is condensed into two, one above the other, making them wider, but I don't know why he show two!

  This appears to have happened after the last update of Adobe Flash Player. Could be a compatibility issue with Firefox, because the problem does not appear in Internet Explorer. Have not yet tried all other browsers.

  For me, it seems that the two images that appear are similar to those used in the manufacture of 3D movies, but instead view overlap them, they are displayed separately. It's just a wild guess and I have no evidence to back this up.

  PS: I also use Firefox 3.6.13 Windows XP.

  Later edit: I found a work around for this problem. Right-click on any incorrect display video and choose settings. On one of the tabs found there is a checkbox "enable hardware acceleration". It has been activated for me, after having stopped it and restart the video browser was back to normal.

• I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I would like to receive a notification on my Apple Watch and iPhone simultaneously the messages/IM; not one or the other.

  I understand that if my Apple Watch is unlocked (or on my wrist) incoming Message notifications will be displayed on my watch. This allows to bypass the notification on my iPhone for messages.  I would like to find a way for Message notifications to simultaneously alert me on my iPhone and Apple Watch.

  Thoughts?

  Hello

  If you disable the detection of wrist (on your iPhone, in the application of the watch, go to: Watch My > General > wrist detection), it will make all notification alerts to be delivered to both devices. However, you will not be able to benefit from features including screen Wake on wrist lift, Apple pay and one unblock after placing the watch on your wrist.

  If you want Apple to consider adding an option for notification alerts to be delivered for both devices regardless of the other settings, you can suggest here:

  https://www.Apple.com/feedback/watch.html

• Can the Sandisk Sansa Fuze 4 GB MP3 read podcasts one after the other

  For health reasons, I need to take a long walk after each meal.  For many years during my walks that I listened to podcasts on my wonderful old Sandisk sansa, who plays a podcast after the other without action from me until I have stop.  It's perfect here in the North when I walk in 30 below zero weather. I mean that I don't want to open my parka and out the player to move to the next podcast.  If I had to do, they would find me lying in the snow, Frost, like all the rest of those poor Devils who bought the wrong MP3 player.  Anyway, after years of using the plug-in on my old Sansa fuze is pretty much exhausted and the player must be replaced.  I buy a sansa clip, but had to return when I discovered that he has not played podcasts one after the other, automatically. (And it's also too small for my needs).  Before you buy a new 4 GB sansa fuse, so I need to know if this greatest player will play my podcasts consecutively and one after the other.  Your advice would be much appreciated.

  MrHat wrote:

  I currently use the Sansa e250 2 GB MP3 Fuze player Walkman.

  There is an e250 (2 GB) and a rocket. They are 2 totally different players. The "rocket" (original) replaced the e200 series model.

  But if your podcasts are placed in the Podcast folder (or even record Audio books) and then ranked in the same "Album" folder, they must play consecutively without stopping, regardless of the model of reader.

• Drive on which Windows XP to reside is always labeled as a system drive. How can I make one of the other disks that has Vista or 7 that the new system?

  Change the system drive

  I'll try to explain my situation better than I can.

  My situation is that when I used to have XP installed, I had installed the only drive I had back then which is now the drive D, for a long time, so I have Windows Vista Home Premium 32-bit, Windows 7 Home Premium 32 bit installed on two different discs, Vista is installed on drive C and 7 is installed on drive E , but I don't have XP that I had managed to get rid of it.

  My problem is that the drive on which Windows XP to reside has always left this disc marked as system in the disk management window, and I was wondering how to do that one of the other readers who has Vista or 7 that the new system?

  I already managed to change the startup disk from drive where Vista is installed to, it's just that I need to change the disk that is marked as system to another drive, such as D drive begins to show signs that it comes at the end of his life and I would like to move the startup folder as well as the other files needed to start on the other.

  I assume that you installed Windows XP 1, then Vista, 7 (these 2 OS not in order)?

  And Vista and 7 was by all means upgrade installation?

  Since originally, that you have installed Windows XP on drive D, it should be marked as 'system' and retains so the tag 'system '.

  The volume of the 'system' should be identified as the first primary partition active. It may or may not have the files it contains.

  The fact that the system considers "system drive" does not mean that there are files that it contains.

  Now, you want to delete the existing volume and create a new volume. Needs to be done outside the facility.
  When you start the cd or DVD to start the installation list us readers, if you remove the volume the volume drive letter is already booked, so you get the next available drive letter, do not re-use the deleted volume drive letter.

  If he removed during installation and then recreated as a new volume (formatting does not remove the volume, you need to delete the volume and recreate it)

  -[Posted by Darrell Gorter [MSFT] in another forum.]

  Try to format the XP partition and change the drive letter.

• I use CC as a teacher. Installed on 2 computers and use only 1 time. Is it possible to install CC and a third machine and disable one of the other? Mario Dirkx

  So, I would like to install CC on a third machine and disable one of the other! Is this possible?

  Mario Dirkx

  Yes.  You can install it on as many machines as you want and then control which two are active by signing in/out according to the needs.

• How to assign values to the fields (topic-one under the other) in multiple output forms (cursor)?

  Hi all

  I have a form that has text_field columns below, from the RECEIVED_FORM_15G table. This table is empty.

  (1) CUST_CODE with 1 line item. (Number of items displayed = 1)

  (2) ACCT_FD_NO with 10 line items. (Number of displayed items = 10)

  There is more than 1 ACCT_FD_NO to 1 CUST_CODE.

  When I enter the CUST_CODE and press tab, all ACCT_FD_NO values should appear. I take values in another table called KEC_FDACCT_MSTR ACCT_FD_NO

  and in the ACCT_FD_NO, one under the other (topic). So I put in the following code:

  BEGIN

  PREMIER_ENREGISTREMENT;

  FOR CUR_R IN (SELECT ACCT_FD_NO FROM KEC_FDACCT_MSTR WHERE STAUS = 'E' AND ACCT_CUST_CODE =: CUST_CODE)

  LOOP

  NEXT_RECORD;

  : ACCT_FD_NO: = CUR_R.ACCT_FD_NO;

  END LOOP;

  END;

  But the problem is that I'm not able to view the value captured in the next consecutive line items.

  It appears in the first and second line item only.

  The first value gets displayed in the first column, then the cursor moves to the first line item in the second line of command,

  the second value is shown in the second line of billing, (it's because of NEXT_RECORD in my code)

  more later all the values displayed in the second line item only. (I checked with message call.)

  I want it to display one under the other.

  The problem is that the cursor does not move to the third line item after the second line item.

  If the remaining values gets displayed in the second line item only.

  So what is the problem in my code?

  Where should I put the next_record to move the cursor from one line to the next line item item IE the second line item to the third line item

  & the third line item in the fourth line of billing and so on...  Please let me know.

  Thank you.

  Is Oracle Designer 6i

  Oracle 9i.

  The above code is just...

  The only error was in the palette property of CUST_CODE, 'required' was not set to 'Yes'.

  So after the setting for the 'YES', this has worked perfectly well.

• can perform us two actions with a single button in two clicks, one after the other?

  Mr President.
  
  can perform us two actions with a single button in two clicks, one after the other?
  
  I want that when I click on the button Add once it add data to the database and when I click again on this button it clears the form data to the empty fields.
  
  Concerning
  
  Tanvir

  In the code, it should be easy.

  The following code adds that a button called butman with text 'ADD '.
  It then registers a listener that will be called if the user clicks the button.

  This listener then calls the runAddData method if you clicked butman while it contained the text of "ADD" and it calls the runClearData method otherwise.
  That's why he will swap the functionality of the button between ADD and CLEAR on each click.

  final Button butman = new Button("ADD");
  butman.setOnAction(new EventHandler() {
            @Override
            public void handle(ActionEvent t) {
                      if (butman.getText().equals("ADD")) {
                                butman.setText("CLEAR");
                                runAddData();
                      } else {
                                butman.setText("ADD");
                                runClearData();
                      } // END IF-THEN
            }});
  

  I hope that's what you wanted.

  Further reflection.
  You might want to run the ADD and CLEAR methods in their own son so that it can run in the background without slowing down your user interface.

  I also reuse rather a single button for several features instead of to apply with hundreds of nodes used only rarely with masses of code to show and hide as needed.

• 2: Sequentially all an elements of array, display one after the other

  Hello!

  This is a new start for another thread (http://forums.adobe.com/message/4897959#4897959).

  (ActionScript 2 ONLY)

  My site is a SWF that loads on the user requests data from a database of MySQL via PHP.

  I have no problem to control the whole communication process.

  On the homepage, as well as new which are already presented in the main part of the right side of the page, I want to display on the left side a few reminders of the essential services and also registered users of mandatory measures must do when visiting the site.

  DB returns: an array with one. separator and the total of the items in the array.

  In Flash, I use the following function to get the picture:

  remindersFct = function () {}

  var myReminders = new LoadVars();

  myReminders.identity = "reminders";

  myReminders.onLoad = {function (ok)}

  If {(ok)

  _root.reminderFld.html = true;

  var myArray:Array = new Array (myReminders.mydata.split("|"));

  myArray.length = myReminders.totalItems;

  }

  else {}

  Stop();
  

  }

  };

  myReminders.sendAndLoad ("misc.php", myReminders, 'POST');

  };

  remindersFct (); start the process

  I want to know different things...:

  1 - How can I 'explode' this table in its different elements (all are text strings)

  2. so, how can I know the SWF to view them, one after the other, in the field appropriate htmlText

  3. How can I adjust the length of each of these items, based on the length of the text they contain

  Thank you very much in advance for your help!

  Just another thing.  Given that you call the setTimeout for both halves of the conditional, it means that you don't need in the conditional and can move around outside, and you don't need in the first half of the conditional either...

  counter ++;

  Sto var = setTimeout (displaytext, delay);

  If (counter == theText.length) {}

  counter = 0;

  }

• Playing several clips video one after the other on the main timeline

  Excuse the probably simple question but I'm just starting with Flash.

  I imported a few trailers directly in flash and saved as video clips.

  I want to be able to insert these clips on the main timeline and play one after the other, by repeating once they all played.

  In the main timeline, I put one layer for each clip and a keyframe where the clip is inserted for each layer.

  When I go to play the flash file, is to show the first frame of each movie file and before the first frame of the next movie file.

  What should I do to make the entire movie file flash game in this specific context before moving on to the next section where is the following file in the sequence, then to play all this film?

  Sorry for what is probably a simple thing to ask.

  Thank you

  Create a new layer actions on the timeline stop() and the main square. commands on this layer in each frame where resides a movieclip.

  In each clip, at the end (last image) you mean the main timeline to play(); While it moves to the next section (where it stops because of the stop() commands you add).

  If at the end of each movieclip you put either:

  AS2: _parent.nextFrame ();

  for AS3: MovieClip (parent) .nextFrame ();

  For the last movieclip in programming, you will replace nextFrame() by gotoAndStop (1);

• FF jump between tabs if I have several open at the same time and it sometimes seems to be trying to load the same page one above the other

  When running FF for awhile, it starts to jump between different tabs I have open without clicking anything whatsoever. Also, it will sometimes appear that another copy of the same tab I have open try to open again at the top of page. The address bar that appears at the bottom of page loading will appear one above the other and the page will jump up and down about a 1/8th of an inch. Out of the enclosure, then by restarting FF does not solve the problem. I have to restart the computer and then restart FF for him to quit.

  I changed to Chrome and it doesn't, but I prefer the FF browser so I can get this fixed number.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Try disabling hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Create a new profile as a test to see if your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

  I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

  Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

  You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

• for each page, I'm going to (including this one) something keeps vomit "Secure connection failed" notice, like 50, one after the other - how to make them stop?

  When I open a web page, and sometimes between the two, something launches a 'warning' that the "secure connection failed". I've added nothing to Firefox, but I stopped most of the security plug-ins or extension nothing helps. It wouldn't be too bad if it happened a page once or twice but I'm talking 10,15,20 one after the other.

  Try this solution:

  https://support.Mozilla.com/en-us/KB/troubleshooting%20extensions%20and%20themes