Incorrect activity data
Was wondering if anyone had any suggestions on how to correct the incorrect activity data? My wife has reduced its objectives to about 200 calories per day just to experiment with the application activity and she is still unable to achieve this goal, unless it's one day, she does a workout. She's up and down of the markets all day at work (which certainly would increase the heart rate to be considered exercise.)
Just curious to know if there is something you miss. You need to be a vegetable not to burn 200 calories per day. Objectives of settlement also work when they feel like it.
There are also times when she goes for a mile 3 fast walking up and down the hills and he gave her 10 minutes of exercise.
Hello
Every minute movement equaling or exceeding the intensity of a brisk walk took into account in the daily exercise goals and moving of your wife.
If she supports outdoor records his iPhone with him and walks or runs as training via the application of the session training, data GPS can estimate its distance and pace. Otherwise, it is important for his arms swinging naturally as she walks or races, because the watch relies on the movement of arms (identified through the built-in accelerometer) to follow the movement. Unless the application of the training session is used, heart rate data are not required account in the estimate of exercise or calories. The daily focus of travel is also active energy / calories (rest energy / calories are not taken into account).
Calibration of watch your wife will allow him to estimate more precisely various fitness and results related to the activity (by teaching how his arm movements relate to "Stride" lengths at different speeds).
Calories and other calculations also depend on his personal information. To verify that it was entered correctly and update over time:
-On his iPhone, in the application of Eve, go to: My Watch (tab) > health > edit (top-right).
More information:
Use the activity on your Apple Watch - Apple Support
Use of the workout on your Apple Watch - Apple Support
Calibrate your Apple Watch for better accuracy of training and activity - Apple Support
Tags: Apple Watch
Similar Questions
-
Watches of switch resets the activity data?
Switching between my two watches resets activity data and replaces the data on the iPhone. Go back to the first watch updated the iPhone to see again all activities and achieved the objectives for the day but it now shows double badges for the longest series of movement and intelligence shows me have resisted for only 8 hours, even if the chart has 13. Anyone else having issues with activity and several watches? I bought the second one, because my first has been repaired/replaced, which took some time.
Hi JWins,
Thank you for using communities Support from Apple!
I understand that switching between Apple watches has affected the data on your iPhone. In this case, I recommend reading on the following article to ensure that the process that you use to switch watches is identical to what is described in the article. Your progress should update automatically after activation.
Use more than one Apple Watch with your iPhone - Apple Support
Best!
-
I wanted to know if there was a way to clear the activity data? It dosnt seem to matter what date range, I put in there always gives me the same information I know is not so for everything like today my son sat for an hour, but he says he has had 11 log ons and sat for 12 hours?
Hi Rachel,
I apologize for the late response. This feature is no longer available. If you want to have this feature back, please send the suggestion as a feature request on the http://feedback.live.com/ page and select "Windows Live Family Safety".
For your other question about the newspaper over the life of your child, please see the PC activity tab. Have you tried to change the date range? Check if it will update the number of newspapers ons and the time that your son has been on.
Kind regards
Gerard G. -
Hi all
EBS r12.2.4
rhel6.5
Active Dataguard applies in ebs?
It is available in 11.1 or 11.2 only and up to?
Thank you very much.
JC
Hello JC,.
See the following blog: https://blogs.oracle.com/stevenChan/entry/oracle_active_data_guard_111
See also ""E-Business Suite Oracle Active Data Guard Certifications ". "
Coco - M
-
Worklist BPM using Active data ADF to auto-refresh?
Hi all
Jdev: 11.1.1.7.1
Oracle BPM worklist use ADF Active Data Services to automatically refresh the task list table when a new item is pushed into the queue of the user?
Just happened to get a stacktrace error and found ADSFilter at the launch of the BPM list.
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:446)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.bpel.services.workflow.client.worklist.util.WorkflowFilter.doFilter(WorkflowFilter.java:248)Thank you
Srini
Hi Srini,
I do not think that the Oracle BPM Worklist using ADF ADS to automatically refresh the queue of the user (you must manually click the Refresh button).
Antonis
-
Active data guard lost synchronization
Hi guys,.
I hope you can give me some advice.
I have a BD PRIMARY in a server and a STANDBY in another server.
I do not configure these databases and I don't have too much experience with data protection.
The problem is that the STAND BY lost the sincronization. I just watched a few views on the database and I found that the media database is READ only, so I think that is an Active Data Guard.
-PRIMARY:
SQL > SELECT name, State, database_role, open_mode connections, log_mode FROM v$ instance, v$ database;
STATUS DATABASE_ROLE LOG_MODE CONNECTIONS
--------- ---------------- -------------------- ------------
BD PRIMARY READ WRITE ARCHIVELOG
-STANDBY TIME:
SQL > SELECT name, State, database_role, open_mode connections, log_mode FROM v$ instance, v$ database;
STATUS DATABASE_ROLE LOG_MODE CONNECTIONS
--------- ---------------- -------------------- ------------
PHYSICAL STANDBY BD READ ONLY WITH APPLY ARCHIVELOG
-PRIMARY:
"SQL > select SEQUENCE #, FIRST_TIME NEXT_TIME, APPLIED, ARCHIVES of V$ ARCHIVED_LOG, whose name = ' STANDBY' FIRST_TIME agenda;
SEQUENCE # FIRST_TI ARC APPLIED NEXT_TIM
---------- -------- -------- --------- ---
56 18/03/15-18/03/15 NO YES
57 18/03/15-18/03/15 NO YES
58 18/03/15-18/03/15 NO YES
59 18/03/15 03/19/15 NO YES
60 19/03/15 03/19/15 NO YES
61 19/03/15 03/20/15 NO YES
...
426 13/05/15 13/05/15 NO YES
427 13/05/15 13/05/15 NO YES
428 13/05/15 13/05/15 NO YES
429 13/05/15 05/14/15 NO YES
430 14/05/15 05/15/15 NO YES
I saw the newspaper archive all copy them correctly on the standby server, but they apply. I don't know why.
How can I get the two database will be synchronized? What option I have?
Best regards...
Hello, you should check if Fal_server and Fal_client settings are configured in the main bodies and relief.
In the standby instance fal_server must point to name PRIMARY, as it appears in tnsnames.ora
fal_client must point in standby mode, as it appears in tnsnames.ora
In the first instance, fal_server must point to the name of Eve, as it appears in tnsnames.ora, fal_client pointing to primary name, as it appears in tnsnames.ora
on the other hand, you must restore the automatic sequence 33-55 on the backend and fal then transport and then primary eve because of the resolution of the gap.
http://docs.Oracle.com/CD/B19306_01/server.102/b14239/log_transport.htm#i1268281
-
In bulk API REST v2 activity Data Export 'primary key '?
After reading the documentation, I expected that ActivityId would be the primary key when you export activity data - for example, it would not be in double ActivityID in the data returned by the export items . However, I see the exported data where I have several references to activity that are identical, except that they have different CampgainIds
- Is ActivityId, CampaignId the primary key for the activity data? If not, what is?
- When the activity with the same activity ID data has different areas (excluding CampaignId)?
Thank you!
It is a known issue that we're working to correct.
-
Refresh the MV of standby Active Data Guard
Is it possible to refresh a materialized view (quick or full) come from a standby database Active Data Guard open in read mode only w/apply? Or can I just do the update of the primary?
Hello mseberg,
You made a very good point about the definition of a database of the READER.
After you have answered, I found in MOS: create a distributed materialized view based on a master table on a database in read-only (Doc ID 276023.1)
This explains that it is NOT possible to make a fast refresh of a database shall RO. However, it *peut* be possible to do a complete refresh of a standby Number. It depends on the query used to define the MV. If the RDBMS Analyzer determines the MV is *able* to fast refresh (even if there may not need it right now), so you can't do a full refresh since the eve of the RO. If the parser determines that the request is NOT able to fast refresh, then you can do a full refresh since the eve of the RO. I tested this script on 11.2.0.3.8 and found to be true:
CREATE THE MIMI MATERIALIZED VIEW. MV_TEST
TABLESPACE USERS
IMMEDIATE CONSTRUCTION
COMPLETE REFRESH
AS (SELECT * FROM TEST@MIMI_ROSTBY);
ORA-16000: database opened for read-only access
ORA-06512: at "SYS." DBMS_SNAPSHOT_UTL', line 364
ORA-06512: at "SYS." DBMS_SNAPSHOT_UTL', line 446
ORA-06512: at line 1
Now, I've changed the MV query to use a 'one time' feature (ROWNUM), which causes the query become complex (not able to fast refresh). I can now create a MV on the day before RO, because the query is no longer able to fast refresh and requires no registration on the eve of the RO:
CREATE THE MIMI MATERIALIZED VIEW. MV_TEST
TABLESPACE USERS
IMMEDIATE CONSTRUCTION
COMPLETE REFRESH
AS (SELECT * FROM TEST@MIMI_ROSTBY WHERE ROWNUM > 0);
Created.
-
Insert into a primary database of Eve Active Data Guard
I use Oracle EE 11.2.0.3.8 on Solaris 10.
I read that it is possible to do an insert in my database for the standby Active Data Guard by redirecting the insert to get on the primary via DB link. I GLOBAL_NAMES set to TRUE and he needs to stay that way. This means that I can't create a DB link pointing to my first as such:
CREATE DATABASE LINK PROD. WORLD WITH THE HELP OF "PROD_PRIM";
How can I get around this in order to insert data in my standby ADG primary?
Hello;
There is an article about it here by Uwe Hesse:
http://uhesse.files.WordPress.com/2012/03/realtimequery.PDF
I understand that if GLOBAL_NAMES is true, then, the database link must have the same name as the database in which it connects.
Best regards
mseberg
-
Grid d? infrastructure is needed for Active Data Guard fast failover?
Hello
I'm currently deploying an Active Data Guard of 11 GR 2 configuration with a captain and two slaves physical standby and failover accelerated for a Java JDBC application. Each instance has a read-only service that is always active and a service of reading / writing that is activated only on the master:
srvctl add service -d smsgsig1 -s smsgro -l PRIMARY,PHYSICAL_STANDBY -e NONE -m NONE srvctl add service -d smsgsig1 -s smsgrw -l PRIMARY -e SELECT -m BASIC -w 10 -z 150
Initially, I had planned to use the Service of Notification of Oracle (ONS) to notify the application in case of change of master, that works, however, after a few tests, it seems that simply leave the retry request enough times in the case of a connection failure is sufficient to re-connect to the new master afterwards, in order to complete any pending transaction.
So my question is: since I plan not to use ADD-ONS, do I have the grid infrastructure and Oracle Restart at all to deploy Active Data Guard? The documentation does not explicitly require it, and all the necessary tools, including srvctl, exist in the plain 11 GR 2 home. However the mechanism of activation/deactivation of the service will work without restart? To be honest, I don't think it would be, but that this would simplify the deployment, a little, I thought it would be good to ask :-)
Thank you for your understanding,
Chris
Hello;
The simple answer is no, I could consider changing my order srvctl.
EI SESSION (type switching must be set to both)
m BASIC (set on both)
l PHYSICAL_STANDBY (isn't one of yours in this service role?)
z - 15 (150 retrys seems too high)q (the value TRUE or FALSE)
w (set on both)
srvctl add service d smsgsig1 s smsgro-l PRIMARY - SESSION - q TRUE m BASE w 10 EZ 15
srvctl add service d smsgsig1 s smsgrw-l PHYSICAL_STANDBY - q REAL - m BASE w 10 EZ 15 SESSION
Best regards
mseberg
-
Data Guard versus Active Data Guard?
Environment:
Oracle on Solaris 5.10 EA 11.2.0.3 database
I have read several threads here and paid through the documentation, but this point still escapes me.
When Data Guard to become Active Data Guard?
When Eve is OPEN and in read mode ONLY all redo logs are actively applied?
If I stop log apply and OPEN the day before for READONLY access, is this just regular Data Guard?
I want to of course use Data Guard but not pay for Active Data Guard at this stage.
Where this is documented?
Michael, if you listen, it's well to the top of your driveway! :-)
Thank you very much!!
-garyHello;
When a database of the previous day is opened read-only for queries, sorting and reporting.
Requires a license.
The day before still applies again.
http://www.Oracle.com/technetwork/database/features/availability/DS-activedataguard-11gr2-130305.PDF
See also - 9.2 open a physical database from the previous day-
Oracle® DataGuard of Concepts and Administration 11 g Release 2 (11.2) E10700-02
Best regards
mseberg
Published by: mseberg on January 29, 2013 08:03
-
Oracle11g R2 Active Data guard using ASM problem?
I configured oracle11g r2 RAC on 2 notes with the ASM (OS, unix) grid.
ACR is running.
Now I'm setting up Active data Guard.
Under Network instance user + ASM and the listener is running.
User is running under oracle listener static.
Any drive is mounted.
Oracle RAC and Data Guard directory and structure I've kept even.
Now my problem is below:
$. / rman target sys/HPinvent123nbl@dcpdb sys/HPinvent123nbl@drpdb ASSISTANT
Recovery Manager: release 11.2.0.1.0 - Production on Wed Jan 16 16:28:32 2013
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: DCPDB (DBID = 316773134)
connected to the auxiliary database: DRPDB (unassembled)
RMAN > database of target duplicate for the eve of the active database.
From 16 January 13 Db double
using the control file of the target instead of recovery catalog database
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID = 5644 device type = DISK
content of Script memory:
{
backup that copy reuse
TargetFile ' / u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdcpdb1' auxiliary format
' / u02/app/oracle/product/11.2.0/dbhome_1/dbs/orapwdrpdb';
}
execution of Script memory
From backup 16 January 13
allocated channel: ORA_DISK_1
channel ORA_DISK_1: SID = 1897 instance = dcpdb1 = DISK device type
Backup finished on 16 January 13
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of Db in dual at 16/01/2013 16:28:48
RMAN-06136: the auxiliary database ORACLE error: ORA-00200: control file could not be created
ORA-00202: control file: '+ data '.
ORA-17502: cannot create the file + data ksfdcre:4
ORA-15001: 'DATA' diskgroup do not exist or are not mounted
ORA-15055: unable to connect to the ASM instance
ORA-01031: insufficient privileges
RMAN >
Please help. \
Thank you
SolaimanIs your Oracle asmdba group user name?
What is the output of command mentioned below
ID Oracle
-
OIM 11 g database using Active Data Guard recovery
Hello
Someone did he do IOM database failover configuration using the active data guard.
Here are the details
• Two application in primary servers and one in secondary sites
• Two databases one in primary and the secondary sites.
• Two application servers point to the primary database.
• There is an Active Data Guard set up between primary and secondary data.
• Secondary database is in stand-by mode.
• Unique CNAME is configured and actively points to the primary database.
• Failover of the database, the principal is down and the secondary database is marketed as primary and CNAME is changed to point to the secondary database.
• All the data sources in Weblogic are configured to use CNAME.
The problem here is the SID. In the primary, we have JSQOIM1P and in the secondary, the SID is JSQOIMDR.
So when we switch the error we get is unknown TNS name like Weblogic data sources don't know the JSQOIMDR.
How do configure us the failover in this scenario?
Thank you
Kunal jegouHello
I was able to achieve this by setting up a unique service name pointing to the primary db SID and the same name of unique service on the secondary db pointing to the db secondary sid.
For the benefit of the users of the forum.
CNAME - usoimdb pointing to primaryDBHost and can be changed to secondaryDBHost in the case of DR
Service name - usoimdbsvc pointing to primaryDBSID and usoimdbsvc to secondaryDBSID on secondary db useSources of data, directdb and Kingdom of security to help the chain of
JDBC:Oracle:thin:@usoimdb:1523/usoimdbsvc -
When I generate a PDF reports using < af:fileDownloadActionListene > and Ireport this erros fires when I click on active tab.
I use Studio Edition Version 11.1.2.3.0:
Pt1 is a < af:pageTemplate >
cil2 we < disabled af:commandImageLink = "#{!}" bindings. CreateInsertEnc.enabled}"id ="cil2 ".
< af:commandImageLink id = "cil11".
Binding = "#{backingBeanScope.BakingDocument.cil11} '"
Icon="/pictures/printer.png".
shortDesc = "Print" >
< af:fileDownloadActionListener method="#{backingBeanScope.BakingCotizar.PrintDoc}"/ >
< / af:commandImageLink >
Error log:
java.lang.IllegalStateException: ADF_FACES - 60003:Component with the ID: pt1:cil2 not registered Active data.
at oracle.adfinternal.view.faces.activedata.PageDataUpdateManager.unregisterComponent(PageDataUpdateManager.java:600)
at oracle.adfinternal.view.faces.context.RichPhaseListener.handleStartAndStopActiveData(RichPhaseListener.java:478)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:487)
at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:202)
at javax.faces.webapp.FacesServlet.service(FacesServlet.java:508)
to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:173)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:125)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
to org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$ FilterListChain.doFilter (TrinidadFilterImpl.java:468)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:293)
at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:199)
at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:119)
at java.security.AccessController.doPrivileged (Native Method)
at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)http://tompeez.WordPress.com/2011/11/16/jdev-11-1-2-1-0-dealing-with-adf_faces-60003-error-component-with-ID-r11cb1-not-registered-for-active-data/
Dario
-
Hello
We're trying to create a configuration of guard of active data on 2 physical machines. We have a watch created and works correctly, but put in question whilesetting and data active guard configuration.
Additional primary and standby on the primary server is DGMGRL configuration. (not yet did nothing to sleep)
-----------------------------------------------------------------------
DGMGRL > see Configuring
Configuration - DGConfig1
Protection mode: MaxPerformance
Databases:
prod - primary database
Dr - Physical standby database
Error: ORA-16664: impossible to receive the result of a database
Fast-Start Failover: DISABLED
The configuration status:
ERROR
-----------------------------------------------------------------------
The primary database listener:_
[Journal of the oracle@prod] $ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = prod.localdomain) (PORT = 1521))
)
)
ADR_BASE_LISTENER = / u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = prod)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = prod)
)
(SID_DESC =
(GLOBAL_DBNAME = prod_DGMGRL)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = prod)
)
)
Standby database listener:_
[oracle@dr ~] $ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
listener.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.162)(PORT = 1521))
)
ADR_BASE_LISTENER = / u01/app/oracle
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = dr)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = dr)
)
(SID_DESC =
(GLOBAL_DBNAME = dr_DGMGRL)
(ORACLE_HOME = u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = dr)
)
)
Entry on the two TNS:_
[oracle@dr ~] $ cat /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
tnsnames.ora # Network Configuration file: /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/tnsnames.ora
# Generated by Oracle configuration tools.
PROD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.161)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = prod)
)
)
DR =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = 192.168.1.162)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = dr)
)
)
Article followed for the creation of the DG: http://www.oracle.com/webfolder/technetwork/tutorials/obe/db/11g/r2/prod/ha/dataguard/dg_broker/dg_broker.htm
Please suggest where it goes wrong?
Consider!Hi bLak!
Can paste you here the results of the following command?
1.On both server tnsping dr trnping prod 2. On Standby DGMGRL> show configuration 3. I think you standby server is not see, primary. use Netca add prod to Net Service name again 4. if need , disable database dr; enable database dr;
Concerning
Mr. Mahir Quluzade
http://www.Mahir-quluzade.com
Maybe you are looking for
-
Links do not work on some web pages
On some web pages (MacWorld, Wall Street Journal), by clicking on the links does nothing. I can't even log. Here is a screenshot of my Safari security preferences in case this is useful. Any ideas on how to make these work sites? Thank you
-
Profile of Newbie Xcode provision of the question and problem recording peripheral Dev Member Center
Help! I am a user of Xcode newbie. Just signed up for a developer account (free version added to my existing Apple ID). I followed a tutorial to make a few changes to the Apple TV 4. In the tutorials that seem very useful do not have additional in
-
HP 50 g - reliable use of function DIV2
Hello The "DIV2" function in the ARITH-> POLYNOMIAL menus did not accept my entries in the DIV2(X^5+X^4-...,X^2+X+1) form. My calculator back several times the message ' error DIV2: Type of Argument Bad. " I realized that the real value of the variab
-
Help! HP Photosmart Premium C309g - takes forever to scan images
Is it me or something? I scan the images at 300 dpi, and it takes a few minutes to complete. I'm scanning the photos in 600 and it takes double that. I Scan photos to 1200, then it takes 10 minutes! Why so long? Is this normal?
-
drivers for computer laptop hp15r074tu
Personalities respected,. I bought the new laptop hp15r074tu with freeDOS operating system (no driver cd is provided). Now I want to install windows 8/8.1 in this laptop, what precautions should be taken in charge during operating system installation