Increase the limitations of characters on the NDP measures

Similar Questions

• Need to change the properties of the Clipboard or increase the number of characters that can move from one program to another

  Original title: Clipboard

  Hello

  I use a software and I have the problem with the paper, I need to change the properties of the Clipboard or to increase the number of characters that can pass from one program to another

  where can find Clipboard in windows 7 and how can I change properties?

  There is no user-oriented Clipboard option.

  For 32-bit applications, the Clipboard can allocate blocks up to 2 GB in size or to a maximum of the amount of virtual memory in the PC has, is the least. The Windows Clipboard does not impose any other size limits.

• Does anyone know if Microsoft intends to increase the limit of 256 characters on the path/file names?

  It seems Im bumping up against the limit of 256 characters for path names / quite frequently these days. The increase of 8 + 3 characters for the file names, to the era of MS-DOS, to 256 characters/path of the file names is a wonderful thing when it was first implemented. But 256 limit character on the file + path names seems now quite inadequate. I'd even dare to suggest that increasing the limit above 256 would be more than just a nice update, but a required progress to catalogue the catalogue in full expansion of the knowledge we have today. Anyone know if Microsoft intends to increase this limit of 256 characters on the path + filename anytime in the near future?

  My recommendation is to increase the limit to a maximum of 256 characters to 4096 characters for the path + filename. This should be sufficiently comfortable for a few years anyway.

  System configuration: Winndows 7 RTM, Gigabyte GA-EP45-UD3L motherboard, Intel Pentium Dual - Core E6300 Wolfdale 2.8 GHz, 4 GB of memory PC-1066 DDR2 Patriot Viper, 500 GB Western Digital hard drive, GeForce 8800GT Videocard

  This already done with versions Unicode Windows API functions. When tools using the Ansi Version (to make it compatible with Win9x) the path is limited to 256 characters. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• 6008 OR increase the resolution by limiting the beach?

  Hello

  I wonder it is possible to increase the resolution of the 6008 OR by limiting the range in the labview software?  For example, if I put it at 04:55 V instead of-10 to 10 V I then get 10 /(2^12) increments as opposed to resolution 20 /(2^12)?

  Thank you

  Yes, but you must use one of the beaches that is supported by the hardware.  You can find the complete list in the specifications.

  If you use differential measures, you can use ±5V.  If asymmetrical, you only have the possibility to ±10V.

  Best regards

• My organization is planning on increasing the length of password of 6 to 8 characters. Will what effect have on users?

  Users are invited to increase the length of their password the next time that they are required to change their password or is change immediately for all users at 6 characters or less?

  Hello

  Thank you for keeping us posted.

  I apologize for the delay in responding.

  I would have you post your query in the TechNet forums.

  Check out the link-

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Back to us for any issues related to Windows in the future. We will be happy to help you.

• Increase the limits of descriptor file on the managed server

  Hello
  We have a Server Admin that handles a managed server.

  We need to increase the managed server file descriptor limits.

  We modified the script commEnv.sh on the administration server and we have successfully passed to 65 536 the limit. Here is the log from the boot of the server administrator

  # < 25 sep 2013 11:04:18 CEST > < Info > < Socket > < lv01469 > < AdminServer > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1380099858592 > < BEA-000416 > < effective help file descriptor limit of: 65 536 open files and sockets. >

  How can we do the same thing on the managed server. We tried to change the same script (commEnv.sh) on the managed server, but the limits of file descriptor is always of 1024.

  # < 25 sep 2013 11:23:30 CEST > < Info > < Socket > < lv01470 > < 119LIVE_01 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1380101010988 > < BEA-000415 > <system has file descriptor limits-soft: 1 024, hard : 1 024>

  # < 25 sep 2013 11:23:30 CEST > < Info > < Socket > < lv01470 > < 119LIVE_01 > < ExecuteThread [ASSET]: '0' for the queue: '(self-adjusting) weblogic.kernel.Default' > < < WLS Kernel > > <><>< 1380101010989 > < BEA-000416 > <effective help file descriptor limit of: 1 024 open files/Sockets. >

  Thanks in advance

  Solved.

  It has been necessary restart Node Manager change after the commEnv.sh.

• How to increase the control limits for the Audio Volume?

  I have upgraded my PC base unit and no longer have the output of the Speaker Volume I had before. The audio output is more silent than before with the same speakers I used. I have moved all the sliders on the control panel of the Volume on their maximum position, but still can't get enough of output to the speakers. The important thing is for my use are 'Volume Control' and 'Wave', and these are set to the maximum. Now I have a motherboard with Intel D845GERG2 Intel i845GE chipset. The operating system is Windows XP Professional SP3, as previously. The sound card is SoundMAX Integrated Digital Audio with Legacy audio drivers. I checked using Device Manager drivers and hardware to work properly. The problem is software because I can achieve the required high speaker volume if I use VLC Media Player and set the volume to 200%. With Windows Media Player, set the volume to 100% is sufficient. I'm looking to increase range parameter on the control panel of Volume as a general solution. Can you advise if this is possible? I looked at a few ideas, these courses: edit files (.inf) SoundMAX driver. Modify the registry keys concerned. Use different audio drivers (none seem to be available for my hardware). Install the software to boost the audio output (VLC Media Player should be achieve this somehow). Install alternative (rollback) Microsoft drivers. Any advice would be much appreciated.

  Just an update of my efforts on this issue.

  I revisited the audio registry settings SoundMAX for HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ \0005\Settings {4D36E96C-E325-11CE-BFC1-08002BE10318}. These are installed when you install the driver for SoundMAX Integrated Digital Audio. Changing these settings has already failed to get an increase of output audio volume. I have now found some settings of the value of these registry keys that have given me a satisfactory increase in the volume of the audio. In short, the cure for my situation was:

  The file source (wdm3516b_Cadenza.exe) driver available from the Download Center Intel is a self-extracting ZIP file. Unzip this file to a location convenient temporary store (C:\Temp)

  Use a text editor (Notepad) to edit the INF of the driver - in my case, it's "smwdmCH4.inf. Changes to this file cause the digital signature of the file to be invalid, but choose "Continue Anyway" to solve this problem during the installation of the driver. To increase the sound volume levels, the audio volume registry key value parameters that have been predefined 08 (hex) have been changed to 01 (hex). I suppose that this change dB levels produced by the SoundMAX Integrated Digital Audio.

  To install the new settings:

  Uninstall the SoundMAX Integrated Digital Audio hardware by using Device Manager.

  Restart the PC - this should give a "new hardware found" restart of the PC.

  Use Device Manager to reinstall the driver for SoundMAX Integrated Digital Audio. Do not use the automatic selections for this - run the installation process where you stored the INF driver edited file.

  Once installation is complete, a check on the properties of the device must indicate that the device is functioning properly.

  Use regedit to check that changes in the edited file driver INF appeared in the area of the Windows registry - in my case, it is HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Class\ {4D36E96C-E325-11CE-BFC1-08002BE10318} \0005\Settings.

  I will emphasize that it is NOT a recommended fix - it turns out that it worked for me. The usual caveats apply - save your original settings, or better yet, use software disk image to make a copy of your drive hard so that you go back to square one if she's going "pear-shaped" with adaptations that have been made.

• How to increase the length of line comment fields

  Hello

  as requested by a customer, we need to know if it is possible to increase the length of line comment fields.

  In fact, the size is:

  for allergens/intolerances/additives comment field-> DB limit = 256 characters; Web = 125 character limit

  for field nutrient comment-> to the defined benefit limit = 512 characters; Web = 250 characters limit

  We need to increase both limits up to 1000 characters.

  I hope my question is clear.

  Thank you and best regards.

  Michele

  Hi Michele,

  You can increase the size of the field or the size of the text for the field of comment allergens/intolerances/additives by following steps:

  1, go to \Web\gsm\BaseForms\UserControls\ctlComplianceContainedGrid.ascx, open the file

  2, go to line 102:

  3, edit theCellRepresentation.getTextareaCellEditor or the width of the field, save the file, refresh your page open or create a new page, then this field will change to the newly configured size

  Notes: the maxinum supported text is 4000 characters

  Unfortunately, the comment nutrient field do not support 256 characters. I suggest that submit you an improvement if it necessary business.

  I hope this helps.

  Thank you

  Jessie

• Restore or increase the number of lightweightThemes stored in prefs.js

  Hi, since Firefox lets you keep a list of people with disabilities "light themes" to try because later, saved in the prefs.js (shown in the Extensions > appearance in Firefox) ive been setting up a collection and yesterday found https://addons.mozilla.org/en-US/firefox/user/birdyann/themes with a lot I wanted to try, but did not know that Firefox limit disabled themes at 30 , so after the addition of more than 30 of these themes to my list of disabled, open all the themes disabled id was on the list have been removed before now.

  is there anywhere other that prefs.js I can watch what's going to tell me what lightweightThemes I * allowing * in the disabled list?

  is it possible to get prefs.js to increase the number of disabled themes it will keep track of?

  Firefox stores a maximum number of Personas (DEFAULT_MAX_USED_THEMES_COUNT = 30) data

  • Resource://GRE/modules/LightweightThemeManager.jsm

  If you install more Firefox Personas will remove other Personas to make room for the new identity, so it is best to keep a list or bookmark the site of your favorite characters.
  
  You can override this limit by creating a whole pref with the name lightweightThemes.maxUsedThemes and set the value accordingly.

  • http://KB.mozillazine.org/about:config

  You can also use the Personas Plus extension to handle more Personas.

  The list of installed Personas is stored in the prefs.js in the Firefox profile folder in the pref lightweightThemes.usedThemes in format JSON object ({'id': ' # ', 'name': 'xxx',...}).

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

  The first entry of this pref is the currently used character.

• HP - 50g RPN - how to increase the size of the variable icon in the command screen in the RPN

  Greetings.

  How can I increase the size of the icons 'F' keys for variables in the RPN command line window?

  My reason for this is to be able to see the full name of the variable.

  Thank you.

  Edit: Perhaps sizes of keys to function 'F' is what determines the size of the variable icon. Does this mean that it cannot be increased?

  If you press SHIFT RIGHT and then press the ARROW KEY down, you can see more than 5 characters that are currently displayed for the softkey text.

  a second solution to think abou... to help the CSE function and custom designed GROBs.

  (However, take into account the current size of the police... how small it really is possible and stay legible-

  You must take account of the resolution of the screen of 50 G... it's not a 'Tablet' hi-res-like display)

  See the example on page 20-4 of the 50G users guide.

  a copy of the user guide can be downloaded here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual & lang = to & CC = US & docIndexId = 64179 & TaskID = 120 & prodTypeId = 215348 & prodSeriesId = 3235173

  Here is the example used on page 20-4

  % HP: T (3) A (R) F (.);
  { {
  21 8 00000EF908FFF900FFF9B3FFF9A2FFF9A3FFF9A0FFF388FF GROB
  "hp"}}

  the list above on the battery... run

  MENU

  If you try to increase the amount of visible characters when running programs, you can use INFORMATION or an application like GUIPLUS located here:

  http://www.HPCalc.org/search.php?query=guiplus

• After updating Firefox, the font on my screen size has been reduced for all applications. How can I increase the size of the font on my screen?

  After the update, the next screen shows all the letters in smaller characters, with fewer pixels. All screens are like that now, and I found nothing in Firefox Help content. It is a problem because I have vision problems. So, how can I increase the font size that had it before? My screen is approximately 20 inches wide.

     Also, any chance I can change all the font to Arial instead of Times New Roman?
  

  Hi shbuzz2001,

  Have you tried to increase the amount of zoom by pressing on CTRL and + a few times? This article will show you how to use the Zoom.

  You can also check out the Knowledge Base article on the accessibility in Firefox - make Firefox and work of content for all users. It deals with default fonts and other options that may interest you.

  Hope this helps!

• How can I increase the print size letters on the screen

  Sometimes, printing characters are too small and I need to increase the size (%) before printing a form

  The size of the font displayed on the screen does not directly affect the font of the printed size. The screen size is affected by the change of the Page or Zoom the text Zoom level. The print font size depends on the scale as shown in layout or preview before printing.

  File > Layout Page or file > print preview
  
  100% is the normal setting - it change that you find necessary

• How does one increase the number of entries in the drop-down list of the address bar?

  It seems that the number of entries in the drop-down list of the address bar is limited to twelve URLS. I would find it convenient that more than twelve years can be shown, but do not know how to increase the number.

  Increase or decrease browser.urlbar.maxRichResults using Subject: config

  • http://www.mydigitallife.info/change-the-maximum-rich-URL-listings-in-Firefox-awesome-smart-location-bar/
  • http://KB.mozillazine.org/about:config

  NOTE: The FasterFox extension may affect the number of items displayed if you have it installed (addons > Extensions).

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How to increase the video memory on Portege Z830 - 11 M?

  Hello!

  I have a Toshiba Portege Z830 - 11M. I want to increase the video memory.
  I don't know if it's possible and how to do it. I tried to open the bios by pressing the F2 key (as in the product specifications, I received with my laptop) and I arrived at the Toshiba help settings. The ESC and F1 keys open the Windows startup settings. If anyone can help me, please advice.

  Thank you very much.

  Hi Mishal

  In general the Portégé Z830 - 11 M is designed to escort us in usual daily activities such as sending mail, Office Automation and communication internet and feature thin and lightweight design allows us to take it anywhere.

  Hardware configuration has limited the performance of course, but at the same time offer excellent multitasking and long battery life. As far as I know on this machine you will not find any option to increase the performance of the GPU and everything that it works automatically.

  According to some feedback non demanding games should be playable with this graphics card too.
  I can't imagine that you want to play games with this machine so I would like to know what it is to ask about the graphics performance more.

• I want to increase the memory on the 2210CDS Satellite

  I have an old Toshiba Satellite 2210CDS/6.0 I want to give to charity. Until I do, I wanted to increase the memory from 64 MB to 128 MB minimum, because he seems excessive paging of memory under Windows 98, it slows down a lot too.

  The original 64 MB memory module is marked PC100-222-62, Toshiba p/n THLY6480H1FG-80. I ordered since equivalent barrettes memory 128 MB (PC100-222-620) from different sources. They fit well, but the memory is still limited to 64 MB, as evidenced by the page to configure the BIOS and Windows pages 'system '.
  The computer has only one memory location. What I am doing wrong?

  Ruud Hartog

  Hello

  This laptop is very, very, very ;) old

  However, the laptop can be improved up to 160 MB. 64 MB internal memory + 128 MB additional memory module

  The Toshiba recommend using these modules:
  128 MB - PA3005U
  64 MB - PA3004U

  Usually after upgrading the BIOS should automatically recognize the module.