Information bar continues poppong

Similar Questions

• Internet Explorer information bar is missing.

  When I need to download the latest control Flashplayer or Active-x, the INFORMATION Internet Explorer BAR is missing.  Therefore, I'm unable to download these updates.  I searched MS knowledge base, tried to Fix It, etc. (microsoft.com) for a solution to this problem.  It occurred when I use IE7 and continues with IE8.

  I am running windows xp, service pack 3

  I tried to use Windows Update.  This requires an ActiveX.  Also, I don't have the InfoBar of IE8.

  Now, I had previously disabled all add-ons in IE8.  To reactivate, IE8-> Tools menu-> manage add-ons-> (must wait to allow add-ons to be cataloged)-> select all the Add-ons listed-> click Activate all add-ons.

  After that, Windows Update works normally.  I have not really checked for the information bar, because I will first need to run through the need for it, but my problem is now solved.

  Hope this helps others with same or similar difficulties.

• "Title" bar continues to change color

  The "Title" bar continues to change color. I don't mind above all this except that one color is green and I hate this color!

  Is it possible to change this behavior?

  Hello

  I took a screenshot of my title bar in Firefox (Windows 7) and it marked with an arrow below. I think that is what changes the color on your machine?

  In Windows 8, the color of the bars title in all applications is determined by the operating system not Firefox. This varies according to the theme of your operating system, but by default, it is a kind of 'average' colors sampled in your background. This replaces the Aero translucent look of Windows 7.

  So detestable green color is most likely taken from your screen background image. To get rid of him the best bet is to change your background.

  If you wish to override the settings for Windows, you can try a Firefox theme:

  https://addons.Mozilla.org/en-us/Firefox/themes/

  Or you can change the color of the title bar with the code to userChrome.css

  Also, see this MozillaZine forum thread:

  • http://forums.mozillazine.org/viewtopic.php?f=7 & t = 2057009

  I hope this helps.

• The yellow popup information bar appears and disappears quickly before I can click on it

  Normally when a popup is blocked, the information bar yellow appears at the top of the viewport and persists so that the user can click on it and handle its exceptions popup. From 22 of Firefox, the information bar, as well as the icon of the pop-up window right into the calling of URL bar, but disappear quickly, making it impossible to click on one to handle my popup exceptions.

  I realize that the other means exist to add popup exceptions, but I'm a programmer and the site that I'm getting gives our users instructions to add popup exceptions using the yellow popup information bar.

  Firefox can delete the InfoBar in response to something else the script done after trying to open the context menu. Can you post a URL to the actual page, or a bare page that demonstrates the problem?

• How can I get the pop up back information bar?

  By mistake I canceled the pop-up information bar, but I can't find out how to restore

  You get only this icon if popups are disabled and there is a blocked pop-up.

  • http://www.PopupTest.com/popuptest1.html

• L405 satellite how to remove the IE information bar

  Anyone know how to get rid of the information bar of the irritating new at the bottom of the page.
  [Secure content IE only appears]

  Hello

  In Internet Explorer go to view (top)
  Here you must choose "Toolbar" and uncheck the "Status bar"

  Welcome them

• How can I get Firefox to display the information bar when a pop-up is blocked

  I clicked on "don't show this message when pop-ups are blocked" when a popup has been blocked. How can I get this message to reappear again when a pop-up is blocked?

  I find generally pop ups boring, but sometimes they are needed to use some Web sites correctly. Now I can not get the information bar to return when a pop-up is blocked. How can I get that back?

  Operating system

  Windows XP

  You can see a pop-up block icon in the right corner of the status bar if you have chosen to hide the information bar at the top.
  You can click on this icon of pop - up block on the status bar and remove the check mark from «do not show an information message when pop-ups are blocked»

  You can watch these prefs the topic: config page and reset them using the context menu:
  Status bar icon: browser.popups.showPopupBlocker
  The InfoBar at the top: privacy.popups.showBrowserMessage

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

• How to restore the information bar that shows the prevention of opening a pop-up window?

  After Firefox open the InfoBar telling me they have blocked a pop-up window I inadvertently clicked on the link option and delete the new coming information bar.
  How to restore the information bar that shows the prevention of opening a pop-up window?

  This has happened

  Just once or twice

  == I clicked on the link to the option and select the option "do not show this again."

  I put browser.popups.showPopupBlocker false, and always appears in the information bar.

  When I also set privacy.popups.showBrowserMessage to false, it does not appear.

  I use to check, if the info bar is displayed,
  http://www.PopupTest.com/popuptest3.html

  So, the value of the real preferences

  privacy.popups.showBrowserMessage

  and

  browser.popups.showPopupBlocker

  Two of them!

  This help you?

• How can I activate the appearance of the information bar for the purpose of the installation of the ActiveX controls?

  Windows XP SP3 32-Bit Kaspersky Pure 2.0, IE8. I try to run Windows Update or Microsoft. The "check for Updates" returns very briefly and I get the message that I need to install the ActiveX control to run the update. I see clear instructions right click of the 'information bar' and follow the instructions.

  My problem is I do not have the information bar and have spent hours trying to allow him or have it Update ActiveX to recognize appear to be installed. Thank you.

  Internet Explorer 8 information bar: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-GB/help/a7a14db1-f0ce-40b0-a8ee-3c2df2ffd8121033.mspx

  Check your settings to make sure that it is not off.

  • Open Internet Explorer by clicking on the button start , and then click Internet Explorer.

  • Click Tools and then click Internet Options.

  • Click the Security tab and then click Custom level.

    • Do one or two of the following ways:

    • To disable the InfoBar for ActiveX controls, scroll to the section ActiveX controls and plug-ins from the list and then, under prompting for ActiveX controls, click Enable.

  • To disable the InfoBar for downloads, scroll to the section of downloads from the list and then, under prompting for file downloads, click Enable.

  • Click OK, click Yes to confirm that you want to change, and then click OK again.

  If your settings are set as above, then the information bar stops.

• I can't find any help to fix my information bar in Windows Mail. It's like a split screen display.

  I can't find any help to fix my information bar in Windows Mail. It's like a split screen display. A suspected email "phishing" shows the warning in pink on the left side but right, I can still see the partial list of the names of "recipients" email & addresses. The button to unlock does not at all. There is no error message and it started 2 days ago. Do I need to reinstall the program, and if I do, could you provide me with information on how to configure Windows Mail once more.

  Thank you!

  Windows Update forced the installation of IE 9, and that's why you see the problems.  See www.oehelp.com/OETips.aspx#15 for workarounds.

  Steve

• Vista OS does not load. I tried booting and the load screen bar continues to work without success. When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled. Any suggestions?

  Vista OS does not load.  I tried booting and the load screen bar continues to work without success.  When you run the start he stops to c:\windows\system 32\cmd.exe that I don't want to lose my files so I have not reinstalled.  Any suggestions?

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery, if/before you reinstall:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected.

  Once I open my network connections, he says: I connect to my wireless home, but my internet task bar continues to indicate that I am not connected. Is there a way to get to show him that I am connected?

  original title: my computer says that I am not connected to the internet when I am.

  Another solution: Red connection system icon even though I am connected... X

  "Try this. It worked for me.

  I finally removed my network security and the State of the network now shows me as connected. The Red Cross has disappeared. It seems that Windows 7 does not support WPA2-PSK. I can't imagine that's the case. Any ideas as to why, as it is installed on my PC, is an option for WPA2-PSK? As I said, the material is supported and worked with XP. »

  ...

  And another... where the problem was related to the third-party software:

  "I found a solution. I had recently updated my GOAL to the latest version and it is incompatible with the new vista. It seems to be a small bug in the operating system. How I solved it is uninstall AIM and the other program "Viewfinder" or something like that...
  After that I uninstalled both of these programs, the Red Cross had disappeared and I had no network problem either. I now use trillian and I have no problem. I hope this helps! »

• The information bar prevents me from opening Webhelp

  I've recently past computers and updated the operating system to Windows 7. Using IE 8, RoboHelp HTML 7.03

  When I compiled my Webhelp project & tried to see, an information bar prevented me to open help. I've never seen this before and as I know, I have not modified the settings in my generation WebHelp SSL.

  The bar says "to help protect your security, Internet Explorer has restricted this webpage from running scripts or ActiveX controls that could access your computer."

  I suppose this same information bar would also sabotage the webhelp distributed to our customers. Maybe for customers with IE 8, or those who have Windows 7 + IE 8.

  I found a setting in Internet Explorer (Internet Options / Advanced tab/security/check box "Allow active content to run in files on my computer") which disables the InfoBar for me, but ask our clients to set some setting in IE so that they can read the help is not an option.

  My boss thinks there are a few settings in RoboHelp can I set or change to prevent the blocking of Webhelp this InfoBar. Anyone know of such a context?

  Thanks for your help,

  John

  Hi John,.

  In the carrycot single Source layouts, double click on WebHelp

  Bottom right, select the checkbox Add the mark of the Web

  Click Finish to compile

  Hope this helps.

  I also use Windows 7 and RH7. So far so good!

  Randi

• Information bar appears when you view WebHelp on a local site or on a CD

  Information bar appears when you view WebHelp on a local site or on a CD
  
  I used flashhelp that has a solution. Is there a workaround for Webhelp? The probram is run from a cd. version 5 x with service pack for xp.

  Yippidee Diddly doo! (Like Ned Flanders)

• Scanner of Code information bar appears automatically

  Hi all:

  I have a problem with a bar code reader, specifically Unitech AS - 10U.

  Now my problem is this, I am trying to create a sub.vi which accepts the entry of a bar code scanner as if entering the keyboard, make sure that information is the right length and make on to the next step in the sequence. When I use "Barcode Scanner.vi" (see attached vi) it works as a standalone vi no fine no problem, but when I integrate this sub.vi in my main.vi it stops working (even if I paste the entire content of the sub.vi in the main.vi). I found that by using the button "Highlight the execution" in the block diagram and to probe the input as if by magic string make present, however, without this, the input remains empty string (this works in all cases).

  So I tried to hit the forums and I came across "Prompt the user for Input" and it worked perfectly, only downside was that now I have to click on the OK button to accept the serial number I am trying to enter, so I changed to measure the length of the string and use that as the acceptance criteria to complete the while loop (see attached vi). Then bam, same problem, now it won't work unless I have the probe.

  Can someone help me and tell me what I'm doing wrong, I tried searching the forums and have not been able to find someone who had the same problem, I did.

  Thanks for taking the time to read my post, I appreciate it.

  

  That will solve most of the distress, then STOP voting! use a value change event and exit if the length of the string is 6 to 9 characters. (Turn off too much packaging).