is it possible to customize the variable system quiz?

Similar Questions

• Is it possible to customize the generated system of delivery?

  Hi all

  My customer wants to be able to add a little ground to the waybill generated System. I can see where update things on the invoice in e-mails from the system, but could not see anywhere to the waybill?

  There are also a few random bits that get printed on the invoice that are not part of the Bill for the system. No idea how to remove? My client is the impression of Chrome. See below:

  Shipment of layouts

  Under the folder Layouts via FTP or in the admin - Module Sc_results.php - expedition page layouts.

• Is it possible to customize the right-click menu?

  I use FF4 RC2 and I wonder if it is possible to customize the context menu? In FF3 if you right click on a tab lists ' new tab '. Reload tab reload all tabs... "etc. but in FF4 if you right click on a tab lists only "Reload Tab | PIN as App Tab... "etc.

  I really really use the right click-> new tab in FF3 A LOT! It was a HUGE disappointment for me when I started using FF4. Is there anyway that I could add the button tab in the right click menu?

  Thanks in advance!

  Not that I know of. You can use file > new tab or Firefox > tab in addition to what I posted above.

  Maybe an extension like Tab Mix Plus can add this feature in the context menu of the Tab bar.

  • Tab Mix more: https://addons.mozilla.org/firefox/addon/1122

• Satellite U400-124: is it possible to restore the operating system without the DVD

  I have a U400-124 I want to do a system restore.
  I created the Toshiba Recovery DVD but I don't have it with me (I'm in Italy and it is in the United Kingdom).

  I have three left:

  1 Vista (c :))
  2 WinRE (d :))
  3 data (e :))

  Is it possible to restore the operating system without the DVD?

  Also, what exactly are leaving them? I'm not wrong!
  1 Vista (c) - for the operating system
  2 WinRE (d) - is a hidden partition and it is necessary for the backup files in Vista
  3. data (E :) - contains the record of recovery

  Sorry for my lack of knowledge! Thanks for all your help in advance!

  > Is it possible to restore the operating system without the DVD?
  This is possible only if the second partition and HARD disk recovery file has not changed

  Start the Toshiba HDD recovery procedure by pressing the F8 key.
  A start menu should appear, then you should choose the first option called fix my computer.
  Then it should open a new window with an option called Toshiba recovery.
  Choose that and usually drive HARD recovery must begin.

  Good bye

• Is it possible to convert the T61 system so that it can use an infrared remote control?

  Is it possible to convert the T61 system so that it can use an infrared remote control?

  Canon and many other manufacturers of consumer electronics, provides instructions on the operation of the optional accessories in the manual of instructions for the accessory.  Manual user for the primary device will usually include a page that lists compatible accessories that are available for the device.

• Is it possible to customize the sensitive presentation - sequence of the table of contents, Index, tabs filter?

  Hello

  I use RoboHelp 2015 and reactive production layout, I need to rearrange these tabs. I want the tab of filtering of dynamic content to be displayed before the table of contents.

  Is it possible to re - sequence tab filters before tab table of contents by making some backend work in CSS or code?

  

  Or the other way improved - if we select filters say - sales, then sales related subjects should be displayed (rather extended below - just like the expansion of text).

  Is it possible to customize the sensitive provision in this way?

  --

  Thank you

  Christophe

  It is possible through the HTML code. In Notepad, open the file "Topic.slp". On line 35, you will see a list of links:

  

  You can cut and paste the link to get the correct order. The first tag appears on the left side. Please be sure to cut and paste the entire link ''.

• Is it possible to customize the login page customer web email?

  Is it possible to customize the login page customer web email? It would be wonderful to be able to offer my clients a personalized and wonderful connection Web page.

  Thans in advance!

  Diego

  Hi, no you can't.

  This is a 3rd third party vendor offering.

• Possible to change the variable cpQuizInfoPassFail through advanced actions?

  Is it possible to change the variable cpQuizInfoPassFail through advanced actions? I do not see this or the other quizzing variable when I try to create an advanced action and change by entitlement or expression. Let me explain what I want to accomplish, I ask the wrong question. I have a training project, with that I need to include a post test. I don't really like the captivate quizzes. I want the post-test to play as a ride on jeopady where the user chooses issues category and gets points if the user answers correctly. For this I must ask questions on a game board and (from what I can fig) you cannot have multiple questions on the same page. I'm building the quiz with my own custom variables and coded so that the program jumps to a page of the certificate if the user gets more than 84 points. THA all works very well. But I have to be able to tell the database that the program will connect with the user has passed the quiz. I thought I could do this if I assign the value 1 to the variable cpQuizInfoPassFail. Is there a way to do this? Thanks in advance for any help,

  Doug Jackson

  Hi Doug,.

  I don't see the version you are using. Each interactive object can be marked, has a report following properties in the control panel (if you use CP5 or CP5.5) or a tab in the Properties dialog box reports, if you use a different version. You must add a score (default value is normally 1 point) and make sure you add it to the total score.

  If you want to make me a glance, post your file on acrobat.com (free, use your Adobe ID), share and publish. You will have a link that you can copy into a private message to me.

  Lilybiri

• Is it possible to customize the Firefox Button and if so, how?

  I love the whole upward with the Firefox button, but find I have to go into options and add the Tools menu bar (which I use often). I do not keep the menu bar showing that it takes too much space on the screen. Is it possible to add the functions of the menu bar for the Firefox button, and if not, may I suggest this as a future feature, as some of the functions of the menu bar are already on the Firefox button. As there is plenty of space may put all the options of the menu bar on the Firefox button and completely get rid of the menu bar!

  There is an add-on to customize the Firefox button. I have not installed/used the add-on. If you are adventurous, it's here:

  • https://addons.Mozilla.org/en-us/Firefox/addon/personal-menu/

  "I still have the idea of putting all the menus in the menu bar on the Firefox button for us users without keyboard shortcut." How about it Firefox? »

  We are all volunteers without compensation here to help other Firefox users. Elements of the Firefox key decisions were made by developers, and your question about it will probably not be heard by the developers to post in this forum. Maybe the add-on which above will solve the problem for you as long as the developer of the add-on retains support and update.

• Possible to downgrade the operating system?

  Hello experts,

  My Macbook is a 13 "early 2009 (Core 2 Duo 2.0). I have 6 GB of RAM (recently installed the last 2 GB).  Currently, the operating system is OS X 10.11.3.  I think that since this OS has been installed (a few months ago) the machine has slowed down considerably.  "Outputs page" is almost always up.  I re - often starts to get "page outs" to reset, but they will soon get back to the top.  Almost any process bothers me a lot of activity "beachball".  My main use for this computer uses iPhoto to show slide shows to various groups (I have not found that the Photos should be for various reasons).

  I know that this is considered a 'old' machine, but since it is my secondary computer I would not spend the money on a complete replacement.  Is it possible to go back to an earlier version of Mac OS X? That could accelerate or put less strain on, this Macbook?  If I could go back to 10.10 or 10.9 How would I do it?

  Thank you

  JimH

  Your computer will be not a faster were no you downgrade OS X. There's nothing wrong with El Capitan. Page Outs increase because you don't have enough RAM and try to run too many processes simultaneously.

  If you want to demote to an increase in performance, and then wipe the drive and install Snow Leopard.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

• Is it possible to determine the operating system?

  Is it possible to programmatically determine the operating system of the computer that runs an executable of LabVIEW?

  And just in case where you need to know how to say GerdW

  

• Is it possible to rename the variable loop for I?

  I do a lot of work with 2D arrays.  Sometimes, it would be useful when browsing the tables for one of the index named i and the other named j.  Is it possible to change the name of the variable increment other than what actually in another variable?

  Thnaks.

  Hummer1,

  As already said, there is no way to change the image of the final iteration.  However, you can add a description to the wire.  Click with the right button on the wire, then select "Description and Tip", type the name/description you want in the box.  Now you can move your mouse over the wire, and the description will appear in the context-sensitive Help window.  I hope this helps.

  Chris M

• Creating a variable that contains the value of the variable system (Long) Date of change

  Can someone tell me how to write a script to create a variable named DocDate, which contains the value of the variable of system (Long) Date of change? Or write a script that creates a variable named DocDate, which contains the current date? I can't find a lot of documentation on scripting ExtendScript.

  Hi Julee, when you create a user variable in the interface, you cannot include the building blocks of time in the definition. They can only be used in system like the System Date of Modification (Long) variable variables. So the question is, why not just use the variable Date of change (Long) system in your document? What is the purpose of the variable user DocDate? Let me know what you think here, and I can try to help you.

  Here are some ExtendScript resources:

  My blog: FrameAutomation.com | FrameMaker, faster and more effective to

  Debra Herman blog: Extension of FrameMaker

  The large samples of Russ Ward: FrameMaker ExtendScript samples - West Street Consulting

  -Rick

• Is it possible to customize the icons of the bubble?

  Hello
  
  Is it possible to customize or change the selection of available bubble icons?
  
  It would be really useful to have a keyboard as well as mouse icon!
  
  Thank you
  
  Joe CCP

  Hello

  Thanks for the info.

  There is a way to do it by creating a custom style and then by replacing the image of the icon in the folder line of the publication project 'Player '. (You must be careful to keep the size of the image and the name exactly it identical to the original though).
  In the authoring tool you choose always the standard icons, but whatever it be published with your customized style appears the custom icon. The trick is to keep track of what standard icons and then map it on your expensive custom!

  Joe CCP

• The possibility of declaring the variable on request?

  Hello
  
  With the help of Oracle 9i. I'm new to the PL/SQL (coming from c#), I would like to know if it is possible to declare a variable around the where it is used. For example, in the execution of the procedure block, suppose I want to do:
  
  .. existing code...
  
  vTest whole;
  vTest: = 123;
  
  .. existing code (continued)...
  
  In doing so, the procedure could not compile. The only way I know to date is to declare the whole vTest. in the declaration block. Can you please let me know how to declare the variable in the body of the procedure?
  
  Thanks in advance.

  It is technically possible, but I wouldn't recommend it (I personally do not like this approach a LOT).

  ME_XE?create or replace procedure testin  2  as  3  4     vparamone   number default 123;  5  6  begin  7  8     declare  9        vparamtwo   number default 456; 10     begin 11        vparamone   := vparamtwo; 12     end; 13     dbms_output.put_line(vparamone); 14  end; 15  /
  
  Procedure created.
  
  Elapsed: 00:00:00.29ME_XE?exec testin;456
  
  PL/SQL procedure successfully completed.
  
  Elapsed: 00:00:00.01ME_XE?