Is it possible to have a watermark WITH a dynamic time stamp included?

Similar Questions

• How to create personalized with a dynamic date stamps

  I tried to create a customized with a dynamic date stamp. But the date is not dynamic. Help, please

  There are a number of things that need to be properly configured for a stamp to work as a dynamic stamp, form the name of template to the calculation script. If you provide the details of how you set the PDF stamp, it would be useful, as would the next book that has all the information you need: www.amazon.com/About-Stamps-Acrobat® - without paper-Workflows/dp/0985614706 /.

• CQL join with 2-channel time-stamped application

  Hello
  
  I am trying to join the two channels that are time-stamped application, both are total-ordered. Each of these 2 channels retrieve data in a table source.
  
  The EPN is something like this:
  
  Table A-> processor A-> A channels->
  JoinProcessor-> channel C
  Table B-> processor B-> B-> channel
  
  My question is, how are "simulated" in the processor events? The first event that happens in any channel and the Treaty as the timestamp, starting point get it? Or fact block treatment until all channels have published its first event?
  
  Channel A
  --------------
  timestamp
  1000
  6000
  
  
  Channel B
  -------------
  timestamp
  4000
  12000
  
  Channel B arrived both of system a little later due to the performance of the db,
  
  I would like to know if the following query won't work, whereas I would like to match the elements of channel A and B which are 10 sec window and out matches once in a stream.
  
  The following query is correct?
  
  Select a.*
  A [here], B [slide 10 seconds of range 10 seconds]
  WHERE a.property = b.property
  
  
  I'm having a hard time to produce results of the join well I checked the time stamp of application on each stream and they are correct.
  What could possibly cause this?
  
  Thank you!
  
  Published by: Jarell March 17, 2011 03:19
  
  Published by: Jarell March 17, 2011 03:19

  Hi Jarrell,

  I went through your project that had sent you to Andy.

  In my opinion, the following query should meet your needs-

  ISTREAM (select t.aparty, TrafficaSender [range 15 seconds] t.bparty t, CatSender [range 15 seconds] c where t.aparty = c.party AND t.bparty = c.bparty)

  I used the test of CatSender and TrafficaSender data (I show only the part bparty fields and here and that too as the last 4 characters of each)

  TrafficaSender (, bparty)
  At t = 3 seconds, (9201, 9900)
  At t = 14 seconds (9200, 9909)
  To t = 28 seconds (9202, 9901)

  CatSender (, bparty)
  At t = 16 seconds, (9200, 9909)
  At t = 29 seconds (9202, 9901)

  For query q1 ISTREAM = (select t.aparty, TrafficaSender [range 15 seconds] t.bparty t, CatSender [range 15 seconds] c where t.aparty = c.party AND t.bparty = c.bparty)

  the results were-
  At t = 16 seconds, (9200, 9909)
  At t = 29 seconds (9202, 9901)

  and it seems OK for me

  Please note the following-

  (1) in the query above I do NOT require a "abs1(t.ELEMENT_TIME-c.ELEMENT_TIME)".<= 15000"="" in="" the="" where="" clause.="" this="" is="" because="" of="" the="" way="" the="" cql="" model="" correlates="" 2="" (or="" more)="" relations="" (in="" a="" join).="" time="" is="" implicit="" in="" this="" correlation="" --="" here="" is="" a="" more="" detailed="">

  In the above query, either W1 that designating the window TrafficaSender [range 15] and W2 means the CatSender [range 15] window.

  Now both W1 and W2 are evaluated to CQL Relations since in the CQL model WINDOW operation over a Creek gives a relationship.

  Let us look at the States of these two relationships over time

  W1 (0) = W2 (0) = {} / * empty * /.
  ... the same empty up to t = 2
  W1 (3) = {(9201, 9900)}, W2 (3) = {}
  same content for W1 and W2 until t = 13
  W1 (14) = {9201 (9900) (9200, 9909)}, W2 (14) = {}
  same content at t = 15
  W1 (16) = {9201 (9900) (9200, 9909)}, W2 (16) = {(9200, 9909)}
  same content at t = 17
  W1 (18) = {(9200, 9909)}, W2 (18) = {(9200, 9909)}
  same content at up to t = 27
  W1 (28) = {(9200, 9909), (9202, 9901)}, W2 (28) = {(9200, 9909)}
  W1 (29) = {(9202, 9901)}, W2 (29) = {(9200, 9909), (9202, 9901)}

  Now, the result.
  Let R = select t.aparty, TrafficaSender [range 15 seconds] t.bparty t, CatSender [range 15 seconds] c where t.aparty = c.party AND t.bparty = c.bparty

  It is the part of the application without the ISTREAM. R corresponds to a relationship since JOINING the 2 relationships (W1 and W2 in this case) that takes a relationship according to the CQL model.

  Now, here's the most important point about the correlation in the JOINTS and the implicit time role. R (t) is obtained by joining the (t) W1 and W2 (t). So using this, we must work the content of R over time

  R (0) = JOIN of W1 (0), W2 (0) = {}
  the same content up to t = 15, since the W2 is empty until W2 (15)
  R (16) = JOIN of W1 (16), W2 (16) = {(9200, 9909)}
  same content up to t = 28, even if at t = 18 and t = 28 W1 changes, these changes do not influence the result of the JOIN
  R (29) = JOIN of W1 (29), W2 (29) = {(9202, 9901)}

  Now the actual query is ISTREAM (R). As Alex has explained in the previous post, ISTREAM leads a stream where each Member in the difference r (t) - R (t-1) is associated with the t. timestamp applying this to R above, we get

  R (t) - R (t-1) is empty until t = 15
  (16) R - R (16 seconds - 1 nanosecond) = (9200, 9909) associated with timestamp = 16 seconds
  R (t) - R (t-1) is again empty until t = 29
  (29) R - R (29 seconds - 1 nanosecond) = (9202, 9901) associated with timestamp = 29 seconds

  This explains the output

• It is possible to have two tables with the same name in Oracle!

  Oracle Version: 10 gr 2
  
  MS Access 2007, I had to use the 'Export' by which I copy a table (and its data) to an Oracle schema via an ODBC connection. Later, I realized that, during the copy of tables with a mix of lower and upper case names, the table does not copied (exported). But MS Access will give you the message that table obtained export successfully.
  
  MS-Access mess around Oracle data dictionary.
  
  When you issue

  SQL>select * from tab;
  
  TNAME                          TABTYPE  CLUSTERID
  ------------------------------ ------- ----------
  AMStates                       TABLE
  Version                        TABLE

  You will see the names of the tables. But when you try to DESCRIBE or SELECT this table, you will

  SQL>desc Version
  ERROR:
  ORA-04043: object Version does not exist

  You can even create another table with the same name in the schema

  SQL>create table VERSION (X NUMBER);
  
  Table created.

  Why this is happening and how can I bring these items 'non-existent '?

  Hello

  Use

  SQL > desc 'Version '.

  Or

  SQL > select * from 'Version '.

  Or

  SQL > drop table 'Version '.

  To overcome the problems of mixed-case.

• Is it possible to have the same work performed several times using the jobs and Planner?

  I was instructed to examine whether we can move all our DBMS and jobs table that are scheduled using submit next procedure of jobs in the job scheduler

  There are several offers that concern them;

  We run every 3 seconds - this work may take 20 minutes to complete and there may be multiple running simultaneously 8-9, both

  so, my question is possible to use the Scheduler for simply helping employment and then 3 seconds we kickoff again?

  or the first inning started three seconds ago should finish before the next could draw?

  is there any solutions for this?

  I thought maybe you could create a script that creates a new entry every 3 seconds which is named work differently so that they can run at the same time, however, I hope that there is a more simple solution

  DB - 11g

  Thank you

  Thanks for the comments. It's a start. What I do for this work is to use a program. Since my job call the same routine with the same number of arguments. I create based on a program.

• I have a problem with the dynamic buttons on AC3.

  I downloaded a flash with a pre-made navigation model and all the buttons are in English. I am really struggling to do the buttons display Cyrillic text. Whenever I write in Cyrillic text, buttons are empty. Here is the code:

  var menu_label:Array = new Array ("Something",

  'Something',

  'Something',

  'Something',

  'Something');

  var total: Number = menu_label.length;

  var i: Number = 0;

  var: page number;

  var main_menu:MovieClip = new MovieClip();

  stage.addChild (main_menu);

  for (i = 0; i < total; i ++)

  {

  btn var = new flashmo_button();

  btn.name = "btn" + i;

  btn.x = fm_button.x + i * (fm_button.width + 5);

  btn.y = fm_button.y;

  btn.buttonMode = true;

  btn.item_no = i;

  btn.flashmo_click_area.addEventListener (Event.ENTER_FRAME, btn_enter);

  var each_substring:Array = menu_label [i].split("|");

  btn.flashmo_button_label.fm_label.text = each_substring [0];

  btn.item_url = each_substring [1];

  main_menu.addChild (btn);

  }

  Any ideas how to solve this problem? Thanks in advance!

  PS: I am a complete newbie

  Try to join the police in the textfields.  If you select the textfield object in the button, theProperties Panel should have a button available called Embed.  Click on that and rthen select the characters that you expect, you'll need (the less the better in terms of file size)

• Is it possible to have visible thumbnails by default every time I open a document?

  I would like to see my thumb nails every time I open a document. ? Older versions allowed this - it makes me nuts to have to go in

  view-show/hide-navigation components-thumbnails each time I open a document. Any way to set it as default view?

  ... But you can't apply it by default to any file that you open, if that's what you mean.

• retriving records with date and time stamps

  I need to get all records that have been updated between 08:36:06 and 08:36:09 12/15/2009
  
  I use this application it gives me the numbers on the right (I think) because this condition GURMAIL_CPLN_CODE = 'UGAP', I want something more
  using the stamp date and time with dates

  12/15/2009 08:36:06 AM
  12/15/2009 08:36:07 AM
  12/15/2009 08:36:08 AM
  12/15/2009 08:36:09 AM

  select * from GURMAIL
  where 
  PERMAIL_CPLN_CODE = 'UGAP'
  AND TO_CHAR(PERMAIL_ACTIVITY_DATE,'MM/DD/YYYYHH24:MI:SS AM') >= '12/15/2009 08:36%'

  Thank you

  face-> Office (while exclaiming in despair "¿Dang, now how could I miss that?")

  Yes, Max, you're right, thanks for being there!
  When I never learn never to post a reply, unless I ran the code me first? ;)
  In any case: bed here now, ciao!

• Can you have a cluster with a single host?

  Hello

  I'll put up a new VMware infrastructure, which includes a cluster with 2 guests in a place and a single ESX host in a second location.  They will all be managed by server unique vSphere.

  It is possible that the second site can earn an additional ESX host at some point in the future.  So, my question is if I have to create a cluster for the second site and have just the single host in it for now, so its ready if we add a second host?  Is it possible to have a cluster with a host, and what are the consequences of this?

  Thank you

  Joe

  Technically, Yes, you can have a Cluster to a single node and if you plan to add another node in the cluster later it makes sense to set up the first node.

  And, both from a technical point of view, but especially from a point of view BAU.  Mulitnode cluster promotion will be less intrusuve there is no additional software to add on the pre-existing main node, therefore you Board change will be less nervous about the piece of work, because it won't change the node pre - that does not exist.

  From a personal point of view my current client runs a number of single-node clusters, in their environment.

• Make XY graph from the string with date and time data

  1 all sorry for my English.

  I have files with data. In this array of strings, I have 2 columns with date and time. I want to show these data to the XY Chart with time and date on some of the DBL and X on Y.

  I tried to do it by myself, but cannot add to time on X axis.

  Hi olderon,

  you date string is something like "30.01.2014" but looking for "%d//%m %y. Spot the problem?

• Now I have to enter a password every time the computer times out

  I have a hp touchsmart 520pc, windows 7 - I change my homepage photos / or I guess I should say my page Saver screen; but before I did I didn't have to log with password each time.

  Hello

  Open windows control panel. Open preferences, click on screen saver link at the bottom right, and in the next window, uncheck the box next to "in»the logon screen curriculum vitae  Click on apply, then Ok to save the change.

  Kind regards

  DP - K

• I have to stay with OS10.7.5 due to software compatibility, but is it possible to update Safari to latest version during your stay on OS10.7.5

  I have to stay with OS10.7.5 due to software compatibility, but is it possible to update Safari to latest version during your stay on OS10.7.5. How this is done. Thank you very much.

  It is not possible to update Safari past 6.1.6 on Lion.

  (144969)

• I have a mailbox with hundreds of emails I will use is no longer, but I want to save it outside TB. Is it possible to do?

  I have a mailbox with hundreds of emails I will use is no longer, but I want to save it outside TB. Is it possible to do?
  Thank you

  Short answer is then dragging to the desired location in the file system and drop them. Paolos add-on will do the job as well, but it is not really necessary.

  I also think that I should update the link to the add-on as it was available on AMO for quite a while now. So here's the updated link https://addons.mozilla.org/en-US/thunderbird/addon/importexporttools/

  Slide mail from Thunderbird to the file system is converted to EML mail format. This means that almost any program mail (excluding Outlook) can read them in the mail.

  Drag to Thunderbird also works.

• I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

  How your question about Windows Update?

  The answer to your question is Yes, if you buy Vista Ultimate or business and move to Win7 Ultimate or business.

  Specific Win7 forums include http://social.answers.microsoft.com/Forums/en-US/category/windows7 and http://social.technet.microsoft.com/Forums/en/category/w7itpro/

  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• In my XP box, I installed 2 video card that has an output of 2 x 2. So now, I have 4 monitors with my single xp box. I want to join another 2 monitors to him. How can I do? Is it possible to attach?

  In my XP box, I installed 2 video card that has an output of 2 x 2. So now, I have 4 monitors with my single xp box. I want to join another 2 monitors to him. How can I do? Is it possible to attach?

  I want to join 6 screens with a single CPU.

  Hi DebBiswas,

  You can attach as much monitor you need, but it depends on the material if it supports or plug another video on the computer card.

  If you use SLI / Crossfire, the system must support more than 2 cards.