It won't let me burn a CD!

Similar Questions

• I have a file ready to burn to a cd, but need not, it won't let me remove it and it won't let me burn it either

  He clicked on copy to a file that I used, and even if I clicked on cancel before it was over always happens as ready to burn to a cd.  I tried to delete the temporary file and it won't let me, it says that the file is used by another program or user, but my pc is not networked and I did open, and in the end I just tried burning it to a disc, but if I use a cd it says the disk is not big enough , and if I use a dvd drive does not recognize there is a disc in the drive.  I tried to restrating computer.  I want to just get rid of the file.

  Hello Ste2026,

  Thank you for your message.  We will try to start in safe mode and delete the file from there.  Click HERE for instructions to start safe mode.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player won't let me burn CD, "connect a burner and restart the player."

  I use to be able to copy CDs on my computer. Windows Media Player now, says "connect a burner, then restart the player."

  There must be something simple that I know, I'm just bad at computers :)

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Media Player won't let me burn CD

  Media Player displays a message when I am trying to burn a cd that says they cannot burn one or more songs.  They don't tell me why, so I can not burn CD

  Hello

  Thanks for your posting in Microsoft Community

  If you get an error message

  Please reinstall windows media player
  Just press win + r on the keyboard
  Type appwiz.cpl and press enter
  on the left panel you can see active / disable windows fractures.click on it
  you will get a pop up window... just scroll down to see the media present the folder, double click on that
  you will get windows media with box player, just uncheck, and apply and restart the pc

  Note: after that restring do the same producer by checking the box of windows media player and apply ok,.
  try to burn again, if even post here

• Pictures of Droid won't let me copy them to a CD

  Original title: Droid photos

  Pictures transferred from Droid hard drive but the computer won't let me copy them to a CD.  Have been able to do in the past.

  Hello

  ·         You get the error message?

  ·         Which application do you use to copy files to a CD?

  ·         Are you able to burn other files to CD?

  ·         Were there recent changes made on the computer before the show?

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

  http://support.Microsoft.com/kb/324129

• Media Player won't let me record cd.

  Media player11 won't let me record cd. He always tells me to put on a recordable cd. I've changed several times. the computer keeps saying to recordable cd?

  Hello

  1 did you change your computer, after which the issue started?
  2 - is your able to play other CDs CD '?
  3 have you tried with different brands of CD?
  4. have you tested the recordable CD on another computer?

  If your CD/DVD drive does not read or write media, please click 'Run Now' of this article and check if it helps.
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

  See also:
  Burn your own custom CDs

• This program called spyware protection starts a scan and it won't let me open anything

  original title: spyware

  I'm having a huge problem. I was online and all of a sudden everything closed and this program called spyware protection starts a scan and it won't let me open anything. Programs, media, games anything. The only option he buy or well it won't go away, and let not my computer does. Any ideas on how I can get around the program and just close off the coast and then delete. It also doesn't let me open the the Task Manager or msconfig :(

  I'm having a huge problem. I was online and all of a sudden everything closed and this program called spyware protection starts a scan and it won't let me open anything. Programs, media, games anything. The only option he buy or well it won't go away, and let not my computer does. Any ideas on how I can get around the program and just close off the coast and then delete. It also doesn't let me open the the Task Manager or msconfig :(

  It's Spyware Protection 2010 (uninstall Guide). Follow the step by step instructions.
  http://deletemalware.blogspot.com/2010/10/how-to-remove-spyware-protection-2010.html

  If you are not able to download, then find a friend who owns a computer even in Mode safe mode with networking, download the uninstall Guide > burn to a CD or a flash drive > home and run it on your computer. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• my dvd - r, says 4.7 GB, but my computer only shows 4.38 GB and won't let me copy a 4.5 GB file on it.

  I looked on the internet and I read that dvd - r 4.7 GB of storage space but another way to say that it is 4.38GiB (gibibyte). My problem is that when I try to copy a file of 4.5 GB (specifically, I'm trying to burn a dvd movie), the computer won't let me. the computer confuses the GiB with the Go? If so, how can I solve this problem?

  It is 4,707,000,000 bytes, i.e. 4 489 MB or 4.38 GB.

  4489 binary megabytes = binary 4,707,000,000 (about 4.7 gigabytes)

• My Macbook Pro won't let me put my password, after it has been locked in icloud

  Hello.

  I have a Macbook pro to the end of 2013. I locked using icloud with a four-digit code. I forgot the code and had several attempts trying to remember her and now I think I found it, but it won't let me put the code in another attempt. the message on the screen says 'wrong password. try again"but there is nowhere for me to try again. someone can help me. I tried to start upward into recovery mode, but she still needs the code for it, and when I get it it takes me to the screen locked again.

  Hello

  You will need to contact Apple to unlock your Mac: https://getsupport.apple.com/?caller=psp & PRKEYS = PL104

• My iPhone 7 won't let me push down on the icons to move them. No matter how hard or how long I push the icon itself just happens.

  MY iPhone 7 won't let me push down on the icons to move them. When I push it down and that you hold, no matter how many seconds the icon itself appears just. Help!

  Push slightly, not difficult.

• Touch IPOD GEN 3 won't let me sign in with my Apple ID

  I have a 3 generation IPOD touch and it won't let me sign on the IPOD touch to get all the apps.

  But I can't signon to apple on my Windows 7 computer (with this ID different than my main Apple ID) and watch the apple news in the Gen 3 IPOD online.

  I wanted to go to the app store and download an older version and the app for the key.  But when I sign on the IPOD touch says wrong password?  But I can sign with my apple Online ID?

  Help! what I am doing wrong.

  NOTE: it was my OLD IPOD touch wife and she wanted no more.  I have a very specific use for it.  So I reformatted it under a different email and Apple ID.

  Just where are you trying to connect?

  Did someone I signed now in settings > iTunes and App Store?

• The numbers won't let me record time

  Hello

  I transferred my data from old iMac (mid-2010/Mavericks) numbers to a new (end 2015/El Capitan). In addition to the fact that I can't use the wonderful version of iWork and I'm stuck with a version with an annoying interface, numbers will not work correctly.

  I have a table to track the interactions I have with my students online. In a column, I record the time spent in particular student tutoring. Although the numbers transferred the old data to the new program, it won't let me enter the duration in. I can't copy and paste. And since I get paid according to time spent, it is a crucial column.

  How can I fix it?

  Thank you

  Kim

  Kim,

  It is always easier to help when you see what you see.  Use this link to help you post a screenshot.  It is safer to remove the personal information from the screenshots.  So duplicate sheet and change called a remove personal information:

  How to post a screenshot on the Apple Discussion Forums

  Explaining what happens when you type in a cell where you try to enter the hour.

• iMac won't turn. Startup disk is full. TDM won't let me edit.

  iMac won't turn. Startup disk is full. TDM won't let me edit.

  My iMac turns off 10 seconds after the start to the top. I tried repair disk running, to no avail. What is happening is because my boot drive is full, off the 500 GB I partitioned in mac, 493,63 GB is taken up. I bought a thunderbolt cable to access the TOC on my mac book, and I have access to my files now. The problem is that I can only copy files. Authorities say I read and write permissions. When I start my host computer, it says "you can still open or copy the files on the disk, but you cannot save changes to the files on the disc. Back up the disk and reformat it as soon as you can. "I'm trying to copy all my files on this computer and remove what I don't want copies, then reinstall OSX on my iMac. The problem is that some files are native to all OSX, so it would prevent me from copying the files. For example, if I want to copy my applications folder, it stops to copy once it reached the app store, because it cannot copy that. It is a problem because when it comes to the library, there are small files in there that I don't know if I can copy, then it stops at the copy and I end up with half of my files and I don't know what I need and what I have.

  Everything you need to copy the disk, then start the iMac in recovery (command-R) mode. Wipe the drive and reinstall OS X from the recovery console.

• Tor Browser won't let me set master password

  Tor Browser won't let me set master password

  Thank you FredMcD for your time and effort. I spent all morning going through the number of entries in the link you provided. Unfortunately, none of them could solve the problem--directly.

  However...

  I learned so much about all the obscure and esoteric settings available and how to handle that I was able to synthesize a solution intuitively:

  • First of all, I carefully removed all traces of Tor with an advanced uninstaller.
  • After reinstalling, the browser made his usual routine of Premiere and opened.
  • An information bar first time upward offered access to privacy and security.
  • I AGREED and unchecked the first box (disabling Private Browsing).
  • The program itself given running and I was able to set my master password.

  Private browsing, but also permanent Private Browsing, can be manipulated, turn it back on, then back to the convenience of the user, according to the needs of any particular situation. Note, however, that, under any form of PB, storage and use of password is removed.

  Note that I did all the steps above (and many other things) throughout my diagnosis, but only AFTER I had already started using the browser (by playing and by checking the various options), which I think automatically some of my preferences of profile defined until I could do it manually. Alternatively, it could be a bad installation in the first place (questionable), or a combination of these factors. Whatever it is, it worked.

  Regarding support in Mozilla, I am impressed by the volume and diversity of the information contained here, as well as the good Samaritans like you caring nature. However, almost all the documents that I have met is Firefox/Thunderbird-centric.

  A search for Tor showed very little data and nothing similar to my case. By its very nature, a software like Tor would naturally by default an option like private browsing. But how many people know that it kills so the ability to use passwords? Even if the Tor Project is based on the Mozilla engine, I think that the people who run the project should be implemented their own support system or lend a hand here and may not return the ball to well-intentioned donors like you and your employees.

  But in any case - problem solved, thanks to you and those who, as lend you time and advice to a complete stranger.

  Now all I have to do is to find extra time to monitor these pages so that maybe, someday, I can return the favor.

  O

• Updated my phone and now it won't let me back in without activating it all first.

  Hello, I was wondering if there was someone who could help me. Updated my phone and now it won't let me back in without activating it all first. Then I entered the Apple ID and password, and he repeated that they were all both wrong. So I double checked my ID on Apple's site, and it was the same one that I entered. I've also updated my password. My phone still telling me that my references are false. I can't call someone, because I'm locked out of my phone. I can't use my email in relief, because it requires a text on my phone, and I can't call Apple... because, well, I'm stuck on my phone. My fiance is not here, so I can't use her phone. Does anyone have any ideas as to what I can do?

  < re-titled by host >

  What the exact text of the error message you see when you try to activate the device? Say that the two are bad is a bit vague and doesn't look like an I've heard before. It is important to determine what exactly is the problem.