List boxes drop-down interfearing with each other
HE SOLVED. / TobiasHello
When I use two combo boxes with the code adobe (from Component Explorer Flex) example they interfere with each other. When I make a choice in a box the choice I made in the other disappears from the box. How can I change the code to avoid that / or do I have to use a different configuration with the code?
Can someone please explain how to reach Code correctly (can't find no & amp; quot; a button insert code & amp; quot; or similar)
Se my example:
& amp; amp; Lt;? XML version = & amp; amp; quot; 1.0 & amp; amp; quot; Encoding = & amp; amp; quot; UTF - 8 & amp; amp; quot;? & amp; amp; GT;
& amp; amp; Lt; xmlns:mx = MX:application & amp; amp; quot; http://www.Adobe.com/2006/MXML & amp; amp; quot; page = & amp; amp; quot; absolute & amp; amp; quot; & amp; amp; GT;
& amp; amp; Lt; MX:script & amp; amp; GT;
& amp; amp; Lt;! [CDATA]
[Bindable]
public var vinalternativ: Array = [{label: & amp; amp; quot; 1 glas husets & amp; amp; quot; wine: 65}, {label: & amp; amp; quot; 2 glas husets & amp; amp; quot; wine: 130}, {label: & amp; amp; quot; dryckespaket 3 ratters & amp; amp; quot; wine: 230}];
[Bindable]
public var sluttider: Array = [{label: & amp; amp; quot; 24,00 & amp; amp; quot; data: 0}, {label: & amp; amp; quot; 01.00 & amp; amp; quot; data: 1500}, {label: & amp; amp; quot; 02.00 & amp; amp; quot; data: 3000}];
[Bindable]
public var selectedItem:Object;
]] & amp; amp; GT;
& amp; amp; Lt; / mx:Script & amp; amp; GT;
& amp; amp; Lt;! -first combo - & amp; amp; GT;
& amp; amp; Lt; id = MX:ComboBox & amp; amp; quot; ComboBox2 & amp; amp; quot; x = & amp; amp; quot; 86 & amp; amp; quot; y = & amp; amp; quot; 73 & amp; amp; quot; dataProvider = & amp; amp; quot; {sluttider} & amp; amp; quot; close = & amp; amp; quot; selectedItem = ComboBox (event.target) .selectedItem & amp; amp; quot; width = & amp; amp; quot; 106 & amp; amp; quot; / & amp; amp; GT;
& amp; amp; Lt; id = MX:textarea & amp; amp; quot; lokalhyra & amp; amp; quot; x = & amp; amp; quot; 289 & amp; amp; quot; y = & amp; amp; quot; 74 & amp; amp; quot; width = & amp; amp; quot; 70 & amp; amp; quot; height = & amp; amp; quot; 22 & amp; amp; quot; text = & amp; amp; quot; {selectedItem.data} & amp; amp; quot; / & amp; amp; GT;
& amp; amp; Lt;! --deuxieme combo - & amp; amp; GT;
& amp; amp; Lt; id = MX:ComboBox & amp; amp; quot; vinCombo & amp; amp; quot; dataProvider = & amp; amp; quot; {vinalternativ} & amp; amp; quot; close = & amp; amp; quot; selectedItem = ComboBox (event.target) .selectedItem & amp; amp; quot; x = & amp; amp; quot; 86 & amp; amp; quot; y = & amp; amp; quot; 139 & amp; amp; quot; width = & amp; amp; quot; 106 & amp; amp; quot; / & amp; amp; GT;
& amp; amp; Lt; id = MX:textarea & amp; amp; quot; vinval & amp; amp; quot; x = & amp; amp; quot; 289 & amp; amp; quot; y = & amp; amp; quot; 140 & amp; amp; quot; width = & amp; amp; quot; 70 & amp; amp; quot; height = & amp; amp; quot; 22 & amp; amp; quot; text = & amp; amp; quot; {selectedItem.wine} & amp; amp; quot; / & amp; amp; GT;
& amp; amp; Lt; / mx:Application & amp; amp; GT;
HE SOLVED. / Tobias
Hello
When I use two combo boxes with the code adobe (from Component Explorer Flex) example they interfere with each other. When I make a choice in a box the choice I made in the other disappears from the box. How can I change the code to avoid that / or do I have to use a different configuration with the code?
Can someone please explain how to reach Code correctly (can't find no & quot; Insert button code & quot; or similar)
Se my example:
& amp; Lt;? XML version = & amp; quot; 1.0 & amp; quot; Encoding = & amp; quot; UTF - 8 & amp; quot;? & amp; GT;
& amp; Lt; xmlns:mx = MX:application & amp; quot; http://www.Adobe.com/2006/MXML & amp; quot; page = & amp; quot; absolute & amp; quot; & amp; GT;
& amp; Lt; MX:script & amp; GT;
& amp; Lt;! [CDATA]
[Bindable]
public var vinalternativ: Array = [{label: & amp; quot; 1 glas husets & amp; quot; wine: 65}, {label: & amp; quot; 2 glas husets & amp; quot; wine: 130}, {label: & amp; quot; dryckespaket 3 ratters & amp; quot; wine: 230}];
[Bindable]
public var sluttider: Array = [{label: & amp; quot; 24,00 & amp; quot; data: 0}, {label: & amp; quot; 01.00 & amp; quot; data: 1500}, {label: & amp; quot; 02.00 & amp; quot; data: 3000}];
[Bindable]
public var selectedItem:Object;
]] & amp; GT;
& amp; Lt; / mx:Script & amp; GT;
& amp; Lt;! -first combo - & amp; GT;
& amp; Lt; id = MX:ComboBox & amp; quot; ComboBox2 & amp; quot; x = & amp; quot; 86 & amp; quot; y = & amp; quot; 73 & amp; quot; dataProvider = & amp; quot; {sluttider} & amp; quot; close = & amp; quot; selectedItem = ComboBox (event.target) .selectedItem & amp; quot; width = & amp; quot; 106 & amp; quot; / & amp; GT;
& amp; Lt; id = MX:textarea & amp; quot; lokalhyra & amp; quot; x = & amp; quot; 289 & amp; quot; y = & amp; quot; 74 & amp; quot; width = & amp; quot; 70 & amp; quot; height = & amp; quot; 22 & amp; quot; text = & amp; quot; {selectedItem.data} & amp; quot; / & amp; GT;
& amp; Lt;! --deuxieme combo - & amp; GT;
& amp; Lt; id = MX:ComboBox & amp; quot; vinCombo & amp; quot; dataProvider = & amp; quot; {vinalternativ} & amp; quot; close = & amp; quot; selectedItem = ComboBox (event.target) .selectedItem & amp; quot; x = & amp; quot; 86 & amp; quot; y = & amp; quot; 139 & amp; quot; width = & amp; quot; 106 & amp; quot; / & amp; GT;
& amp; Lt; id = MX:textarea & amp; quot; vinval & amp; quot; x = & amp; quot; 289 & amp; quot; y = & amp; quot; 140 & amp; quot; width = & amp; quot; 70 & amp; quot; height = & amp; quot; 22 & amp; quot; text = & amp; quot; {selectedItem.wine} & amp; quot; / & amp; GT;
& amp; Lt; / mx:Application & amp; GT;
Tags: Flex
Similar Questions
-
Hi all
I am writing a flex application that supports something like the following XML
< VersionList >
< version >
< name of output = "7.11.0" >
< component name = "S05" / >
< component name = "S11" / >
< component name = "S12" / >
< component name = "S14" / >
< / Statement >
< / version >
< version >
< name of output = "7.12.0" >
< component name = "S12" / >
< component name = "S19" / >
< component name = "S28" / >
< / Statement >
< / version >
< / VersionList >
I have 2 drop-down list boxes - 1 that contains the version provided the names and another that contains the names of snap!
What I want to do is to fill the list box dropdown version and according to what is selected, fill out the snap combo box
Ex: If the user has selected 7.12.0 - the snap would display s12, s19, s28.
I have my mxml file that is set up to take in the xml file and load the version numbers in a table to fill the area of version! Does anyone know how I could fill combobox snap according to what is selected in the box version?
Thanks a mil in advance, any help would be greatly appreciated!
See you soon,.
Derm
Hi all
In fact, I got it working using xmlLists and xmlListCollections. In case anyone wonders how do...
I used the following pairs of xmlLists and xmlListCollections
Create a list XML object to hold all the values of version
versionList = myXML.Version.Release.attributes ();versionListCol = new XMLListCollection (versionList);
Create a list XML object to hold all the values of component snap
snapList = myXML.Version.Release [-1]. Snap.Attributes ();snapListCol = new XMLListCollection (snapList);
And the following Refresh function
private void refreshSnaps(): void {}Use the filtering on the version name to create the xmlList object
snapList = myXML.Version.Release. (@name is versionBox.selectedLabel). Snap.Attributes ();snapListCol = new XMLListCollection (snapList);
} //end refreshSnaps function
and then my combo boxes resembled
-
I created a PDF form with several drop downs, all with the same drop-down values. When I select a value of 1 in the drop-down list fields, it breeds in all others - which I don't want. Can I fix?
I am fairly new to this, but I think it has to do with the way you have drop them downs named. Copy you a then keep stick in each area? If so, that's the problem. You must rename each with a different number: Dropdown1, Dropdown2, etc. I think this might solve the problem.
-
Several problems with embedded DHTML menu text boxes, drop-down
We have recently improved HR 10 HR 2015. We know a menu dhtml drop-down text question existed prior to the upgrade and the upgrade did not fix it. We now have a more serious problem. We are not certain that all started with the upgrade, but we detected it after you convert our projects to HR 2015 and republish them. I list both here in case they are connected.
The problem known: styles of multilevel list to the level of the main topic and within the text box drop-down dhtml to first level. However, if we add a drop-down list box text in a drop-down text box and apply a list style at several levels to the text in the drop-down text embedded dhtml, the topic seems in good shape on the Design tab, but loses the line numbers or bullets in the preview and in the published version. No idea what would cause the list not to display properly or how to get the multilevel list styles to work in this situation? (Yes, we know we can use styles list rather than multilevel list styles, but it is problematic, too)
The novelty is that, when content is published and read in IE or Chrome (the two major browsers use customers), the drop-down text link embedded dhtml is always present, but the text in the drop-down list embedded dhtml has disappeared (for example, nothing happens when you click on the link to open the text box). It works in preview, but not when accessed through a browser (or access to the content of webhelp after publication to a server directly from my local computer). Any ideas on how to get it to display? The net result for our users, is that a substantial PART of the content of the assistance amount is now more accessible.
Thanks in advance for any help you can provide to these questions!
Here are a few things that I would consider trying.
First, click on Tools > update DHTML and let it do its thing.
A test to see if something has changed. If so, great!
If the problem persists, open one of the samples project. Click here to see a video on how to do
Then open Windows Explorer. Click here to see a video on how to do
Find and copy a file called ehlpdhtm.js and return to your project and paste this file into so that it replaces the one that is there.
Then see if things are better.
See you soon... Rick
-
ASA - Tunnel all traffic, allow rays to communicate with each other
Well, I hope someone can help me with this headache! Switching to employ a PIX and VPN 3005 concentrator Office at home in an ASA5510 for firewall and IPSEC tunnels. It is pretty much a
- VPN on a stick, multiple rays.
- All traffic sent by tunnel
- Internet access through main office (using the web filter) of
- VOIP to VOIP between rays
- All departments are using the clients VPN 3005 HW or ASA 5505 s
HEADQUARTERS: 10.0.0.0/24
Speaks 1: 192.168.11.0 / 24
Speaks 2: 192.168.12.0 / 24
Speaks 3: 192.168.13.0 / 24
-continues to 192.168.31.0 / 24
Spoke with the current configuration, 1 can communicate with all the resources in the home, office and Internet integrated properly checked by a tracert. However, the rays cannot communicate with each other. This is required for VOIP traffic, when all TALK TALK calls are made (sites).
Logging information when talk of talks initiated icmp:
- No group of translation found for icmp src, dst outside: 192.168.31.1 inside: 192.168.11.1 (type 8, code 0)
If I remove the nat (outside) 1 192.168.0.0 255.255.00 - rays will begin to respond to each other, but then the rays cannot tunnel through the Home Office Internet traffic. My brain is so scrambled after the cramming of VPN configurations for these days, so I hope someone has an idea. I've always used concentrators 3005, so it's a little different! In the search for documentation for this configuration, I was surprised that this isn't a most common topology. It seems that this article would (http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a00805734ae.shtml), but there is no rays! In any case, I'm sure this has something to do with NAT rules and perhaps who need access for traffic list speaks of talking.
=============================================
ASA Version 8.2 (1)
!
hostname asa5510interface Ethernet0/0
Speed 100
full duplex
nameif outside
security-level 0
IP address 97.65.x.x 255.255.255.224interface Ethernet0/1
Speed 100
full duplex
nameif inside
security-level 100
IP 10.0.0.40 255.255.0.0permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
the DM_INLINE_NETWORK_1 object-group network
object-network 10.0.0.0 255.255.0.0object-network 192.168.0.0 255.255.0.0
access-list sheep extended ip 10.0.0.0 allow 255.255.0.0 192.168.0.0 255.255.0.0
Allow Access-list extended wccp servers ip host 10.0.0.83 a
Redirect traffic extended access-list deny ip any object-group DM_INLINE_NETWORK_1
Redirect traffic scope permitted any one ip access-list
Global 1 interface (outside)
NAT (outside) 1 192.168.0.0 255.255.0.0
NAT (inside) 0 access-list sheep
NAT (inside) 1 10.0.0.0 255.255.0.0Route outside 0.0.0.0 0.0.0.0 97.65.x.x 1
Route inside 192.168.0.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.2.0 255.255.255.0 10.0.0.1 1
Route inside 192.168.3.0 255.255.255.0 10.0.0.1 1Crypto ipsec transform-set esp-3des esp-md5-hmac RIGHT
life crypto ipsec security association seconds 28800
Crypto ipsec kilobytes of life - safety 4608000 association
Crypto ipsec df - bit clear-df outdoorsCrypto-map dynamic dynmap 1 transform-set RIGHT
map mymap 65535-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 5
preshared authentication
3des encryption
sha hash
Group 2
life 86400crypto ISAKMP policy 10
preshared authentication
3des encryption
md5 hash
Group 2
life 86400crypto ISAKMP ipsec-over-tcp port 10000
management-access inside
a basic threat threat detection
no statistical access list - a threat detection
no statistical threat detection tcp-interceptionWCCP web cache redirect-list Redirect-traffic group-list password xxxxxxx wccp-servers
WCCP 90 redirect-list traffic Redirect wccp servers group-list password xxxxxxxWebVPN
internal MJHIvpn group strategy
attributes of Group Policy MJHIvpn
value of server WINS 10.0.10.1 10.0.10.2
value of 10.0.10.1 DNS server 10.0.10.2
allow password-storage
Split-tunnel-policy tunnelall
mjhi.local value by default-field
allow to NEMusername field-3002 SjfS1Pq2xZGxHicx encrypted password
attributes of username field-3002
VPN-access-hour no
VPN - 250 simultaneous connections
VPN-idle-timeout no
VPN-session-timeout no
Protocol-tunnel-VPN IPSec
allow password-storage
type of remote access serviceremote access to field tunnel-group type
General-field tunnel-group attributes
Group Policy - by default-MJHIvpnIPSec-attributes of tunnel-group field
pre-shared-key *.class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
inspect the they
inspect the icmp
!
global service-policy global_policyHello Ala,
In Act got to be with the Nat configuration.
So basically you want to tunnel the traffic on the rays to communicate with each other.
OK, it would be with a nat 0 with the access list with the corresponding traffic outside.
Also on the crypto ACL for each site configuration, you must add an entry for the traffic of other offices.
I hope that I have explained myself.
Have a good
Julio
Note all useful posts!
-
Why are there duplicate TNS in list names drop-down connection
Why are there duplicate TNS in list names drop-down connection.
Also what is the list updated, if I make an addition to my tnsnames.ora?
Probably because you have multiple tnsnames files in your directory.
Most people don't realize this, but SQL * Plus has the same behavior. If you have a. BAK copy/version, rename it with a leader 1 or something in front of the ILO "tnsnames" to the file name.
-
View usage type lookup does not match the object list definition drop-down display
can someone tell me why this error could be coming:
View usage type lookup does not match the object list definition drop-down display
Thank you and best regards,
AmritHello
seems that in your choice list item (probably call him messageChoice), you are defiining of these properties of the list view definition and the choice list view instance.
You must provide one. If your choice list values to all users (i.e. the vo behind the choice list has no dynamic where clause or the query), then use choose list definition property. If each user sees different options in the drop-down list (i.e. dynamic where clause for vo), use the property of the lookup instance.
In the definition of choice list, give the fully qualified name of the vo.Abdul Wahid
-
Microsoft 3000 wireless keyboards; they will interact with each other
I have 2 PC and I would like to replace the wired keyboards for 2 sets of Microsoft 3000 keyboard, will they interact with each other and can I change Ch / Freq of the units
Hi Baz,
Each keyboard has different frequency and will not interact with each other.
-
Hi all
I have 5 wireless devices must connect to the router.
I want to divide it into 2 groups:
That is to say, 1, device A, B, C, group 2, device D, E.
I would like two groups cannot communicate with each other.
I've heard, it can be done by VLAN, is e2500 can adapt to what I need?
What about EA3500 and EA4500?
I use G wireless, is what it means that ea4500 is out of choice even if it supports VLAN?
Thank you all!
Evil
Thanks for the clarification for the OP
FWIW
is this an alternative to routers that do not support of VLAN, to do what you want
-
Hi, I have the browser explorer Firefox and Internet on my laptop, a friend told me that they will be in conflict with each other. the question is what I would do abouth this.
Your friend has any idea. Both work very well.
-
Two Xbox 360 Wireless controllers Microsoft will interfere with each other?
* Original title: Microsoft Xbox 360 for Windows wireless controllers... Two will interfere with each other?
Controller: Microsoft Xbox 360 Wireless Controller for Windows (JR9-00011)
Operating systems: Windows 7
I have two PCs located in the same room. Is it possible to set up a wireless for each of them so that they do not interfere with each other?
Hello
I would like the links and see if it helps.
How to set up your Xbox 360 to your Windows PC controller
Set up your Xbox 360 for Windows gamepad
If you have other questions, please post your request in the Xbox forums for assistance on this issue.
Hope this information helps.
-
AnyConnect Clients cannot communicate with each other
I have a problem that I've been pulling my hair out... my teleworkers connect to our network of Corp. via a connection AnyConnect VPN (version 3.1) to a Cisco ASA5520. I have not split tunneling enabled for this profile, so that all traffic should pass through the tunnel and all guests are in the same subnet L3... as far as their IP VPN address goes. The problem is the teleworker PCs cannot communicate with each other (pings/RDP/etc.). When I look at the newspaper I see traffic from one to another, have denied anything, but they do not communicate. My Network Corp., I can communicate with the two PCs Anyconnect very well. When I go to monitoring. ASDM itineraries I see each host that is connected to the ASA via Anyconnect, and the gateway for each is the default gateway of the SAA.
Am I missing some setting in the VPN profile that prevents the access between these hosts? I think that something come in the newspaper...
Have you enabled crossed and also a free NAT between AnyConnect users?
permit same-security-traffic intra-interface
network of the AnyConnect_users object
subnet
public static AnyConnect_users AnyConnect_users destination NAT (outside, outside) static source AnyConnect_users AnyConnect_users
If this does not resolve your problem, please post a sanitized complete configuration of your ASA.
-
Hello. I would make both objects or images imported into Muse react with each other. When I say react, think of a ball bouncing off a wall or a pool ball hitting a bunch of other billiard balls. I searched for a widget that might allow cela and couldn't find one. Is this something that can do Muse, or should I look for something else... edge or the interaction of coding? Thank you.
You can do using the edge, then publish it in the "animated dashboard deployment package", ".oam".
-
I want to create a Web site with 4 child pages that interact with each other when opened separately on 4 different computers.Is this possible?
Example:
Child 3-page Web site open on 3 different computers with triggers and the following objectives:
PC #1 - child #1 - confirm button (trigger)
PC #2 - Page #2 - accepted Confirmation Popup, resulting by clicking on 'confirm' page computer/child #1 (target)
PC #3 - child Page #3 - calendar Popup changed, resulting by clicking on 'confirm' page computer/child #1 (target)
Any ideas are much appreciated.
THX.
No this is not possible with Muse.
-
How to install VMplayer 3 network for virtual machines to comminicate with each other?
People,
Hello. I use VMPlayer 3.
SE host: Windows 7
Comments to: Windows XP and Oracle Linux 5I need to set up the network and activate Windows XP communicate with Oracle Linux 5.
I followed this tutorial http://www.vmware.com/support/ws5/doc/ws_devices_serial_2vms.html to configure 2 virtual machines in Windows 7 host machine.
I tried to test 2 virtual machines in the way as below:
In Linux, [user@localhost ~] $ping WindowsXP_HostName
Release: Unknown host WindowsXP_HostName
At the Windows XP command prompt:
C:\ping localhost.localdomain
Its release: ping localhost 127.0.0.1 with 32 bytes of data...
Reply from 127.0.0.1: bytes = 32 time = 2ms TTL = 128
He meets a few times and then disconnected by itself. It seems that Windows XP is ping itself and not Linux server. The host name of the Linux server is 'localhost' as well. It is a kind of confusion for me.
From the information above, we can see that 2 VMs cannot connect between them.Can any folk provides a tutorial or example or case study to set VMPlayer 3 allowing 2 virtual machines communicate with each other by step?
Very grateful in advance.
In the guest machine, all I see is click on VMplayer-> VM-> settings-> network-> Network adapter Connection-> select Bridged: directly connected to the physical network. After that, nothing to keep.
That's it for the network card in Virtual Machine of its parameters, and the rest is done to each guest at the guest OS level.
In Windows 7 host machine, I don't see anything first.
What we need to do is to assign 3 IP addresses to 3 machines: Win 7, Win XP Guest and Linux host.
Why the world can't bring you up Google in a browser and type, the ip static windows xp, then static ip rhea of windows 7 and finally static ip. As I have already said there are more then enough tutorials on the Internet about how to configure a static IP address by a given operating system then I suggest you Google it! It makes absolutely no sense to write the instructions step by step for you when there are already dozens of tutorials available on the internet.
Maybe you are looking for
-
When I add a playlist to my library, it automatically updated with new songs?
Hello world When I add a playlist to my library, for example a list of music playback from Apple which is regularly updated by the editors ("Best of the Week" or 'Hits of today', for example), did the playlist in my library automatically update with
-
Screen HP Pavilion DV6 problem
My current problem is that with the passage of the mobile GPU to save energy I lose the backlight on my screen when the high performance GPU is used. The HDMI output is the video display in case of High Performance, but only an image on the laptop di
-
Windows 7 says in Control Panel under programs that I can run programs for previous versions of windows, but its not let me it always tells me that it cannot find setup.exe and I have the wrong bit configuration
-
Poweredge840 non parte [GRO]
PowerEdge 840 (2S3Kj2J) - Win server 2008 He e questa mattina if e SC Server do non vuole sapere di find a disco di d (solo da DVD, not if trova niente da try a riparare con). GROWTH che he derivi problema da questo message: 1 primary IDE drive not f
-
stop the window from poping up media so I can connect on
help, I can also connect on MSN from DELL