New to the conversion and encoding

Similar Questions

• New to the product and the need to know the basics. Help, please

  I'm new to the product, and we are evaluating. Here's investigations. I hope you can help me:
  1. does it support active/active or active/passive controllers?
  2. What is the minimum time of OTN of replication in asynchronous mode? The minimum data lost can I define?
  3 support for technology: hybrid, SSD, FC, SAS, SATA, 10 GBe?
  4. data protection / snapshot is supported?

  These questions refer to the NAS DELL products, please forgive me if I chose a bad TAGS.

  EqualLogic is active / standby (only 1 controller is online at any time).

  Minimum replication time is 5 minutes, unless you go the synchronous replication, but it should not be used over long distances (higher latency networks).

  EqualLogic's iSCSI only. For iSCSI 1Gbit units are all RJ45 ports. 10 Gbps units have RJ45 ports and ports of SFP +. You can connect the two, but only 1 port is used at a time (not sure how the new PS6210 only SFP + and the RJ45 failover because it has 2 of each on each controller).

  EqualLogic supports indeed of snapshots. With the host integration tools (available for Windows, VMware and Linux (some limitations on the new OS versions (mainly Windows 2012 R2 and RHEL 6.3 and later versions don't are not supported at this time exact (2014-01-22))) you can use the so-called chip-copies.) These IO quiesce to the volume before you say the table to take the snap. HITKIT Microsoft supports SQL, Exchange, Hyper-V, and I think that Sharepoint. I've personally used only the HITKIT with Hyper-V, but in Hyper-V lets it roll back a single virtual machine on a volume, even if there are several on the volume in question.

• I want to know the version or the year for which firefox support the decoding and encoding of characters?

  Please provide details of char encoding in firefox

  Those are just broken web pages that are not sending as real characters, but are ignored.

  You can decode the text with this code in the Web Console (Firefox/tools > Web Developer)

  • http://www.chandigarh.amarujala.com/feature/crime-bureau-chd/chandigarh-rape-87/?page=1

  E=document.querySelector(".spl-stryMn > span:nth-child(5) > p:nth-child(1)");
  E.innerHTML=unescape(E.innerHTML);

  • http://Rajasthan.amarujala.com/feature/samachar/sports/sports-special/special-features-on-india-vs-south-africa

  E=document.querySelector("#special_story > span:nth-child(4)");
  E.innerHTML=unescape(E.innerHTML);

  Right click on the text and open the Inspector.
  Right click on the HTML code in the left pane and use the selector Unique copy to copy the selection to the Clipboard and use it as a selector in the above posted JavaScript code.

  • https://developer.Mozilla.org/Tools/Page_Inspector

• There is a popup "jenkat new game alert" that's no way to anywhere! very annoying. I am very new to the computer and I obviously did something wrong

  I am very very new to a computer and I have no other form of assistance. I'm on the internet and saw a free game, I wanted to download/play. now I'm stuck with this pop up thing that indicates "JENKAT new game Alert." It does allow me to close. It appears in whatever it is I'm trying to do. can someboy there please help me solve this problem and I'm not going to the sites until I thoroughly learn how to use a computer :)

  thanking you in advance, libby

  Hi there, found this:

  http://answers.Yahoo.com/question/index?QID=20090823055839AAqZUAs

  Jenkat games room can be customized to disable the pop-up window of new games. Simply open the Arcade and click on the 'Settings' tab at the top. Then click on the 'Préférences' tab, and then click to remove control of the 'daily game alerts' box.

  If you need to close the Arcade, all you have to do is to find the Jenkat Games Arcade icon in your system tray (the purple cat in the lower right corner of your screen). Right-click on the icon, and then click "Exit". That would end the arcade for you, and you can restart at any time.

  TaurArian [MVP] 2005-2010 - Update Services

• New to the community and VM Ware

  Hello, I am new to VM Ware and this community.  If I want to learn ESXi, where is the best place to start?  Can I install ESXi on my desktop Dell Precision to familiarize themselves with ESXi?

  Welcome to the community,

  Depending on the CPU and the RAM on your system, the easiest would be to install ESXi as a virtual machine in VMware Workstation.

  André

• Can anyone advise me on the conversion and submitting CMYK for the first time?   (In a language that is slow and easy to please)

  There is more discussion on this subject (and opinions) that Carter has pills and I have read many of them... but I'm still confused and since I was less than 7 hours to solve this problem, I'm crying out for more help.

  1... I know that I need more to learn about this... but that does nothing my period

  2nd... This is a simple corporate Head-shot that is produced in a print magazine with an article written by my client.

  3rd... The Publisher asked for the photo to be in CMYK mode and since this editor is in the USA, my assumption at this late date is that the standard CMYK color profile - U.S. Web Coated (SWOP) v2 produced by Photoshop is enough.

  I can be on the right track now, but I'm completely side stepping of Lightroom for all editing and staying in Photoshop in Adobe RGB (1998)

  At this time, when I click on view and choose a PROOF, CMYK is selected.  I don't know if it's accurate, or if the selection is premature.

  I plan to complete my edits in PS and then click on IMAGE, click MODE and choose CMYK.           Currently, for my editing process, it is set to RGB

  Hopefully save them as CMYK will be available after changing the MODE, but my save as feature currently available, available only ADOBE RGB (1998).  Also save a copy and a box to include diapers or not.

  Yesterday, when working on this folder, I clicked on the EVIDENCE and CMYK, but I didn't see any difference in the editing...  It maybe because I exported a ProPhoto since Lightroom file as a basis to begin by... I'm not sure, though.

  My concern is as follows... yesterday, I have saved in a CMYK file and it looked fine on my monitor.  I sent it to the customer (I chose the JPG extension) and when she had, the colors were OFF.  She sent the files back to me, and they were indeed average off...  He told me that it was not a matter of calibration of monitor between his PC and mine.   Which brings me to the last question... my monitor is calibrated "to eye" to a company of printer that I use for my regular photography - which worked great!    And unfortunately, at this late date, I can't get a profile of the printer of the editor.

  Thanks for reading all of this... I wonder if my current game plan is sufficient for this late hour...

  No Lightroom

  Edit in Photoshop in ADOBE RGB (1998)

  Keep selection 'PROOF' in CMYK, so that I have change

  At the end of my edit, click MODE and change to CMYK

  Save the file with CMYK to jpg.   (all other types of files are too big for the customer to manage e-mail)

  Am I missing something?

  There are a number of potential problems here, and it may not be at your end.

  First of all, it should be clear that CMYK is not so much a generic "image mode" because it is a description of the specific press conditions. If you produce final CMYK, you need to have the right profile. Do not use Image > Mode, use Convert to Profile.

  Given that, I wonder anyone who does not accept the Adobe RGB photographs for a magazine article, because it involves a process that doesn't is not correctly color generally not up to date and not managed. A typical workflow would today use InDesign, where images are usually placed in their original space of RGB whatever that is. Then the final conversion output CMYK is made as the last step, when you generate a ready PDF to InDesign.

  It helps if you know the final CMYK, because then you can the evidence for that so your file survives the CMYK conversion with the least possible damage (we're talking range cut here, not general color moves). But it is not absolutely necessary, that is why this workflow is relaitively safe.

  Thirdly, CMYK jpeg is itself risky, because several decoders of jpeg (in some software) is not a proper CMYK support. The result can be weird colors. This could well be the problem here, because it sounds as if your customer uses a non-standard workflow.

  So what to do? I would send two files. A sRGB as a reference, which is guaranteed to come out correctly. Then find a way to send TIFF to CMYK version if they insist, or ask them to try to open it in different software. Of course , you should have a calibrated and profiled monitor, but I agree this is probably not the immediate problem here. There is no particular reason that a CMYK file should return to the colors twisted if he opened and processed in color management software correctly.

• Summary of the conversation and visit apple store

  I was told on the apple store today, sending messages from iphone to iphone use actually given. Is this correct?

  In addition, I was told that if I use Pandora over wifi it is no use of data? Is this correct?

  Finally, I was told on the phone today that there an app on the app store that will allow me to make an appointment at the genius bar. At the store, they had loaded the app and then he said that he has changed and you can use it is no longer to make an appointment. Is this correct?

  Thank you

  Yes, iMessage (iOS to iOS device device) requires a data, either WiFi or cellular connection. The fact is Pandora. If you use WiFi, you do not use your cellular data.

  It seems that you cannot make an appointment at the Genius Bar at the Apple Store at the moment.

  In General, the folks at Apple Store know what they are talking about and are not interested in wasting your time or make things upward.

• I am new to the present and in a bad situation. I am doing this correctly?

  In my work, I have been immersed in a vmware facilities maintenance work. It's fun and it's nice.

  My employer has currently a domaincontroller/file server, MSSql server for dynamic and a simple server RDP / various things. The question that I found is that backups on these can take between 8 and 10 hours combined.

  The original installer of these servers created each machine using a huge virtual drive each heavily stocked. Each backup is performed once a day.

  My question is, would it not be better to split each machine into smaller files and make backups of the part 'server' once a day and do backups of the part "data" several times a day (not backup the entire virtual disk, just the structure of the file progressively modified upward).

  When I asked the original installer why it was not dislocated to each virtual machine by his response was "You don't do things that way.". Makes no sense.

  Is the sound of my thought? The divide all the virtual disks 'server' and 'data', the parts of 'server' to backup once per day and the 'data' several times a day?

  Thanks in advance for any thoughts.

  As I'm not familiar with virtual backup to Acronis, I went on their website to find information. Unfortunately I couldn't find any trace of the CBT for the 'backup and recovery Virtual Edition', but only for the "vmProtect. About your original question to break records of OS and data discs, this doesn't make much difference in my opinion. The main problem is the amount of data to backup and how backup data have to be determined by the backup application. I search using a backup product that supports CBT and pass a weekly full backup and incremental or differential backups for example during the week (CBT leverage).

  André

• Drive hard new for the car and recovery

  Hello

  I have a Pavilion dv4-2141nr S/N: [personal information deleted]. I installed a new model of disc hard WD WDBMYH0010BNC-NSPS, + 2.5 - inch SATA 3 Gb/s. I set the BIOS to start fron DVD/CD and it appears "no boot device - insert boot disk and press a key" on the screen. I tried to reset the hard drive several times and it always comes to the top. What I am doing wrong?

  Sorry, that didn't work.

  It could be a bad set of recovery discs, a bad DVD player, who knows?

  But there a sure fire way to know, if you're in the game.

  Make your own bootable installation of W7 Home Premium DVD.

  If you can still read all 25 characters of the product key of W7 on the bottom of your laptop, you can use the support that you have installed windows (assuming that the set of recovery disks is bad).

  http://MSFT.digitalrivercontent.NET/win/X17-24209.ISO Windows 7 Home Premium x 64 English

  Make sure you get the entire file to download.  Occasionally he sometimes displays a full download, but you don't have the file xx GB 3. integers download.

  Then use this tool to transfer the ISO to a flash USB 4 GB or DVD drive.  This tool will also make a bootable media.

  http://www.Microsoft.com/en-us/download/Windows-USB-DVD-download-tool

  If you can boot from the DVD drive (assuming you make the DVD) so you can contact HP and ask to have your money back, or make another set of recovery discs you sent.

  If you cannot start from ther DVD once again, there is a hardware problem any.

  Try to put the ISO file on a 4 GB USB flash drive and if you can boot from that and install Windows, then you know that there is some sort of problem with the hardware with the DVD player.

• How to make a new account the standard and standard account manager account is on parental controls.

  first of all Hi there.

  I have windows 7 and I put a parental account for my kids but the big mistake I did there is no administrator account on my laptop.
  Now, every time I do anything it's parental control and I can not even a new account administrator due to parental account.
  so please unraveling me is the way to make a new administrator account by account standard and parental settings on the standard account.

  When you have loaded Windows for the first time, then you have been invited for an account name and a password. This account is an administrator account. You must now use it when creating new accounts.

• How to add the version and encoding in XML format

  Hello
  
  I generate an XML using code such as

  SELECT  XMLELEMENT(
               "Document"
              ,XMLAttributes(
                   'urn:iso:std:iso:20022:tech:xsd:pain.001.002.99' AS "xmlns"
                  ,'http://www.w3.org/2001/XMLSchema-instance' AS "xmlns:xsi"
                  ,'urn:iso:std:iso:20022:tech:xsd:pain.001.002.99 pain.001.002.99.xsd' AS "xsi:schemaLocation"
                  )
          )
  FROM    dual;

  The result ist

  <Document xmlns="urn:iso:std:iso:20022:tech:xsd:pain.001.002.99"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="urn:iso:std:iso:20022:tech:xsd:pain.001.002.99 pain.001.002.99.xsd">
  </Document>

  But I need

  <?xml version="1.0" encoding="UTF-8"?>
  <Document xmlns="urn:iso:std:iso:20022:tech:xsd:pain.001.002.99"
      xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
      xsi:schemaLocation="urn:iso:std:iso:20022:tech:xsd:pain.001.002.99 pain.001.002.99.xsd">
  </Document>

  I can add the header in my selection?
  
  The XMLTYPE is inserted in a table and from there transferred via webutil to location of the customer.
  I have found that I can convert the XMLTYPE in a DOM document, and then use dbms_XMLDom.setCharset, but how do I convert to an XMLTYPE. The only way I've found is to convert it to a CLOB, then in an XMLTYPE.
  
  Concerning
  Marcus
  
  Oracle Database 11 g Enterprise Edition Release 11.2.0.2.0 - 64 bit Production

  >
  I was going to suggest XMLRoot but he does not understand the encoding
  >
  Why? :)

  SELECT XMLROOT(
         XMLELEMENT(
               "Document"
              ,XMLAttributes(
                   'urn:iso:std:iso:20022:tech:xsd:pain.001.002.99' AS "xmlns"
                  ,'http://www.w3.org/2001/XMLSchema-instance' AS "xmlns:xsi"
                  ,'urn:iso:std:iso:20022:tech:xsd:pain.001.002.99 pain.001.002.99.xsd' AS "xsi:schemaLocation"
                  )
          )
          , version '1.0" encoding="UTF-8'
         )
  FROM    dual;
  

  Another way

  SELECT XMLTYPE
             (
                '' ||
                xmlElement("Foo",'Fii').getClobVal()
             )
  FROM DUAL
  

• BlackBerry Smartphones New on the forum and the Blackberry

  Had a few questions. I searched your forums for 2 days and please bear with me as I knew not how to answer a text on my blackberry, when I got it LOL

  1. If we can watch tv on our blackberry series? (I love the biggest loser and here in Georgia they show basketball instead)

  2 live radio it works?

  3. How can I disable a missed call messages?

  4. How can I change my front screen icons?

  Im sure I will have more and thank YOU

  Michelle

  Hey goddess72, welcome to the forums!

  Here's an attempt at some answers for you:

  1. do not know... I have not really tried to watch TV on my phone.  I hope someone else can answer that for you.

  2 live radio... What you mean?  Are you referring to a specific application?  I know that there is a program called Slacker Radio which is available in the United States who are supposed to be great (as I am across the border to the North, I don't get to use it ).

  3. press the green phone button.  Upward at the top, click the call button (the one in the middle), press the BB menu button, scroll down to Options, and then under call to the log, select None.  You will always get messages that you have missed a call (as with other phones), but you will not get a message you record Messages more.

  4. to change your icon screen before (homescreen) order, select the icon you want to move up, press the BB Menu, select move, then just place it where you want and click on the screen, or press Menu of BB to confirm the move.

  I hope that helps answer some of your questions!  Do not hesitate to let us know if you have any other questions!

• Request to follow the news of the licensee and the Butler

  Hi all
  
  I framed the next to get the trainer info and owner request.
  
  I intend to use this query in an email generated automatically, running every 15 minutes
  
  I put an outer join on the door because the DML holder could have finished running (v$ sqlarea wouldn't have info on this support DML) to when the configuration of automatic e-mail triggered this request
  
  I'm not a dba, and was worried if there is an error in the logic of my application.
  
  I also expected to join v$ sql_bind_capture using sql_hash_value and sql_address just the way in which I joined v$ sqlarea
  
  Looking forward to your kind help to check the query below
  
  Select distinct waiting_session,
  dba_waiters.holding_session,
  Decode (to_char (session_waiting_info. "" STATE), "0","Butler is currently awaiting ', '-2 ', ' time-out time last server is unknown ', '-1', 'boy waited for a short while', 'boy waited a long time')"standby servers,"
  Decode (session_waiting_info. Wait_time, 0, "waiting boy") ' servers last time-out. "
  Decode (to_char (session_holding_info. (D'ÉTAT), '0',' the owner is currently on hold ", '-2 ', ' time-out time last owner is unknown ', '-1', 'holder' waited for a short period, 'holder waiting a long time') 'holders of Eve ', '.
  Decode (session_holding_info. Wait_time, 0, "waiting boy") "holders last time-out."
  sql_waiting_info.sql_text "the request of the boy."
  sql_holding_info.sql_text "the request of the holder,"
  session_waiting_info. STATUS "pending STATUS".
  session_holding_info. STATUS "with the STATUS."
  session_waiting_info. Process 'process of waiting. "
  session_waiting_info. PROGRAM "PROGRAM on hold."
  session_holding_info. Process 'operating processes.
  session_holding_info. PROGRAM "PROGRAM on hold."
  session_waiting_info. ROW_WAIT_OBJ # 'object of waiting. "
  session_waiting_info. ROW_WAIT_ROW # 'waiting line. "
  session_holding_info. ROW_WAIT_OBJ # 'object of exploitation. "
  session_holding_info. ROW_WAIT_ROW # 'line held. "
  session_waiting_info. BLOCKING_SESSION_STATUS "waiting for the session state."
  session_holding_info. BLOCKING_SESSION_STATUS "having the status of session."
  session_waiting_info. "Use os username", UserName
  session_holding_info. UserName "expectation os username."
  session_waiting_info. MACHINE "MACHINE waiting."
  session_waiting_info. TERMINAL "TERMINAL on hold."
  session_holding_info. MACHINE 'MACHINE operating. "
  session_holding_info. TERMINAL "TERMINAL operations."
  session_waiting_info. TYPE "Wait TYPE"
  session_holding_info. TYPE "operation TYPE".
  of dba_waiters,.
  v$ session session_holding_info,.
  v$ session session_waiting_info,.
  v$ sqlarea sql_waiting_info,.
  v$ sqlarea sql_holding_info
  Where dba_waiters.waiting_Session = session_waiting_info.sid
  and dba_waiters.holding_Session = session_holding_info.sid
  And session_waiting_info.sql_hash_value = sql_waiting_info.hash_value
  And session_waiting_info.sql_address = sql_waiting_info.address
  and session_holding_info.sql_hash_value = sql_holding_info.hash_value (+)
  And session_holding_info.sql_address = sql_holding_info.address (+)
  and dba_waiters.mode_held 'None '.
  
  Kind regards
  Vishal
  

• New to the first and I was just wondering how to caption a video

  Help

  Hey Jake,

  Check these:

  Adobe Premiere Pro help. Working with captions

  Create or import subtitles | Adobe first Pro CC tutorials

  Tutorial: Producing subtitles encoded in Adobe Premiere Pro CC - YouTube

  Thank you

  Regalo

• Enterprise Manager: what's new in the diagnosis and Tuning in 11g

  http://ilearning.Oracle.com/iLearn/en/learner/JSP/rco_details_find.jsp?srchfor= & rcoid = 602012317
  
  has no slide inside
  
  Published by: user787 on March 5, 2011 06:14

  Hello

  The slides are accessible by clicking on the 'demo' button at the top right which seems to be the only slide in the presentation. I missed it as well.

  Niall Litchfield
  http://www.orawin.info/