Nikon D750... cannot open the FIRST or use the DNG Converter.

Similar Questions

• problem with the DNG Converter.

  I change my hard drive in my computer and I had to reinstall all my programs, including CS3, as well as the DNG Converter. I follow the instructions as if they were the Bible. The result is that after several intentions, when I opened the DNG Converter and try to use raw files to create a tease in my website, I get the following message: "IT WAS a MISTAKE the ANALYSIS of THE FILE. How can I solve this problem and what it means. (of a computer point of view no grammatical)

  If you reinstall everything, are you sure you used a fairly new version of the DNG Converter?  The current version is 6.6

  http://www.Adobe.com/support/downloads/detail.jsp?ftpID=5310

• Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea what do to m

  Cannot open the lightroom catalog called "Lightroom Catalog" because it's too new to be used by this version of Lightroom.  You want to select a different catalog?  This is the message when I first click on LR and I have no idea

  Hi steves

  This means that you try to open a catalog from Lightroom CC/6 in an earlier version of Lightroom

  What version of Lightroom you have installed?

  Concerning

  Assani

• I have 8 items. I bought a Nikon D750 and take the Raw files. I downloaded Raw 8.8 file converter, but cannot open Raw files

  I have 8 items. For my previous Nikon D300s RAW converter worked well. Now I D750 cannot open Raw files. I downloaded lastest 8.8 Adobe Raw Converter

  Always cannot open Raw file. Get the message "Could not open as it is the wrong type" how to get the last Raw Converter to work with Elements 8? Any info gratefully received.

  You would have to buy PSE13 to do the same thing. PSE8 cannot be updated.

• Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used it without a problem after update 2015 cc adobe photoshop

  Hello! I can't open my NEF in Nikon D750 files in photoshop, which I used without any problem after update 2015 cc adobe photoshop...

  Just installed 9.4 ACR it works for my RAW files. Camera Raw 9.4 now available

  And the following cc 2015 windows updates installed.

  Updates Windows Photoshop CC 2015
  File download	Size	Date	Notes
  Update Adobe Photoshop CC 2015.1.2 (64-bit)	352 MB	20/01/2016	16.1.2 release
  Update Adobe Photoshop CC 2015.1.1 (64-bit)	352 MB	14/12/2015	16.1.1 release
  Adobe Photoshop CC 2015.1 update (64-bit)	352 MB	30/11/2015	16.1 release
  Update Adobe Photoshop CC 2015.0.1 (64-bit)	258 MB	03/08/2015	16.0.1 release

  

• recover my system. used to install Windows Vista. get the message cannot open the file E:\Sources\Install.wim. Also the code error 0 x 80070002

  So all this started because I tried to clean my computer to give to a friend. I tried refomatting the hard drive, but something was wrong here. After that, when I turn on the computer I get a black screen with message Bootmgr missing. I read a little inside and saw that I could download a Windows Vista recovery disk because my computer did not come with one.
  After that I downloaded and burned the ISO image to a CD, things started looking better. I got to the screen when you select the language and keyboard. Then install windows screen. My options there were 'Install now' and 'repair your computer '. When I try to install, I put in my product key that seems fine. The next message I get is "Windows cannot open the required file E:\Sources\Install.wim. The file does not exist. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070002.
  When I try to repair, he said "select an operating system to repair, and then click Next."
  Operating System: Windows Vista (TM) Home Basic (recovered)
  Partition Size: 34318 MB
  Location: (D :) ACER
  If you do not see your operating system listed, click on load drivers to load the drivers for your hard drives. I try to select Windows Vista retrieved and clicked Next, but what is said "this version of system recovery options is not compatible with the version of windows that you want to repair" or get a recovery of tools such as repair system, System Restore, complete pc windows, tool windows and command promy memory diagnostic restoration. the only problem is he says operatins system: (unknown) unknown local disk...

  Any help would be appreciated. Really want to give my friend a laptop that wont even turn on. Laughing out loud

  Was it Neosmart?

  This isn't an installation disc. It's a record of startup repair!
  You use the repair disk option, not Install.

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11; Acer is in some models Alt + F10 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Cannot open the attachment in yahoo... says the file is used by another program... trying to open Microsoft Picture It!

  Minnie3,

  You may need to change the default program that opens the images.
  Take a look at the following link for more information: http://windows.microsoft.com/en-us/windows-vista/Change-which-programs-Windows-uses-by-default
  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open the NEF in Nikon D7100 with CS5 or DNG Converter files

  I installed CS5.1 and it shows that Camera Raw is to 6.7.0.339.  I have a Nikon D7100 Camera Raw of 7.4, requiring that I downloaded and run the installer with no apparent error.  PS still shows that CR is at 6.7.0.339.  Then... I downloaded the DNG Converter - latest 9.6.   When I open and navigate to a folder where I have a bunch of files the D7100 NAVE it gives a message that says "the source folder does not contain any supported camera raw files.  I thought the idea of the DNG Converter to convert the NEF files in a 'standard' DNG, but I can't even it works.  I know that the folder contains the D7100 NEF files.  What I am doing wrong?

  Did you by chance use other software to get the files from your camera to your computer like Nikon transfer? Thus is known to corrupt the raw during the shots.

  If so this link should fix. You don't need to use because you can use the card reader to move them from the camera to your computer. If I am barking the wrong tree I'm sorry, it looks that you select the folder and not individual files from your description, that is good to do.

  Difficulty of the corrupted Nikon NEF Images

  Good lick

• Cannot open the CR2 of D5sR camera using CS5.1

  I recently bought a canon 5DsR camera and raw files will not open in CS5.1. I downloaded 9.0 DNG converter but does not work. DNG 9 is not compatible with CS5.1? Need me this day?

  Thank you

  ACR 6.7.1 is for items on a PC.

  Adobe Camera Raw is a plugin used by Photoshop and Photoshop Elements on Mac and PC.

  CS5.1 is only compatible with Camera Raw up to version 6.7.1.

  Camera Raw plugin and Adobe application compatibility

  The Canon 5 d R was first supported in camera Raw 9.0 which is only compatible with CS6 and Cloud versions.

  Devices supported by Adobe Camera Raw

  A CS5.1 Mac owner, you have a few choices:

  1. Join the cloud, or
  2. Upgrade to CS6 (not recommended for old software such as CS6), or
  3. Use the DNG Converter. The converter is a separate utility to batch convert files of Raw files to DNG. Then, you change the DNG files in CS5.1
     Camera Raw: How to use Adobe DNG Converter - YouTube

• I can not open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files.

  I can't open my Raw files from my new Nikon 810. With my Nikon 800 I use Bridge to select and then it opens to the PS CS5. To make it work with 810 I download the DNG Converter, but I still can't open the files. What can I do?

  Hi ulcabeek,

  Greetings!

  What version of DNG converter that you use?

  You need DNG converter 8.6 for this: 8.6 camera Raw and DNG Converter 8.6 now available

  Concerning

  Jitendra

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Cannot open the raw files of Nikon d800 in PS CS5 and can not be updated Camera Raw plug-in

  Cannot open the raw files of Nikon d800 in PS CS5 (Win7 64 bit). It is said, the model not supported by Camera Raw. Tried to update Camera Raw plug-in for d800 but keep error message: failed to update, Adobe Application Manager may be damaged. Re-install the latest application manager, but still the same error message. How to fix?

  Thanks to them both.

  Nothing worked until I managed to speak directly to Adobe support. They recommended to install the latest version of Camera Raw Installer 8.6. It has not helped to open NEF files immediately but he fixed an error of 6.7 'update failed' updated Camera Raw! After updating to 6.7 all goes well, see my d800 naves. Cheers, Sergey

• Cannot open the NIKON D3000 naves in Photoshop CS3

  Hello

  We bought Photoshop CS3 to school HERE ion in the United Kingdom. I just bought a number of Nikon D3000 for students and raw images from Nikon D3000 will not open in Adobe Bridge, Camera Raw and Photoshop!

  If anyone knows if there is a solution to this? A patch? a download? Otherwise, we will be limited to use JPEG files!

  On another note, and total curiosity, we bought a number of cameras Nikon Coolpix P6000, which produces images that are not supposed to open in Adobe Bridge, Camera Raw, and Photoshop (Microsoft/Nikon collaboration!) but they do? Any ideas why this is so (as has said, it is curiosity!)

  Information would be welcome.

  Thank you very much

  Carl

  Each device requires a conversion program to convert the specific program of the camera in RAW.  The cameras you mentioned need ACR 5.x to read.  Therefore, it can be done in CS3 as ACR 4.6 is the latest version.

  However, all is not lost.  You can upgrade to CS4 or use the DNG Converter to read RAW images.

  Here is the link for supported cameras http://www.adobe.com/products/photoshop/cameraraw.html

• Have you tried all the recommendations, but cannot open the videos on web pages. Using windows xp

  Cannot open the videos sent by family.  Most recent on picasaweb.google.com.  But also cannot open videos on youtube.  Have tried all the recommendations but nothing works.  Think I've downloaded all the latest add-ons required with no results.  Don't know what else to do.

  Hi AntonioGodinho,
   
  Follow the suggestion given in this article to resolve the problem:
  The video problems with Internet Explorer

• Try to install the new copy off error vista WINDOWS CANNOT OPEN THE REQUIRED FILE 0x8007000D

  OT: Hey tried down laptop restore none tried to install the new copy off vista prem with no joy only error 0x8007000D WINDOWS can NOT OPEN THE REQUIRED of joy

  Portable Hi down tried restore none tried to install the new copy off vista prem with no joy only error 0x8007000D comes WINDOWS CANNOT OPEN THE REQUIRED FILE of joy

  Hi jamesgillwn,

  1. when exactly you get this error message?
  2. what disc do you use to reinstall?
  3. What is the exact error that appears when you try to start?
  4. at what point of the installation you get the error message?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  Try the steps from the following link:

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Note: When you perform the installation, you will lose the data, make sure that you need to backup your data before you perform the installation.